| 1 | --- a/drivers/bcma/Kconfig |
| 2 | +++ b/drivers/bcma/Kconfig |
| 3 | @@ -13,6 +13,11 @@ config BCMA |
| 4 | Bus driver for Broadcom specific Advanced Microcontroller Bus |
| 5 | Architecture. |
| 6 | |
| 7 | +# Support for Block-I/O. SELECT this from the driver that needs it. |
| 8 | +config BCMA_BLOCKIO |
| 9 | + bool |
| 10 | + depends on BCMA |
| 11 | + |
| 12 | config BCMA_HOST_PCI_POSSIBLE |
| 13 | bool |
| 14 | depends on BCMA && PCI = y |
| 15 | --- a/drivers/bcma/Makefile |
| 16 | +++ b/drivers/bcma/Makefile |
| 17 | @@ -1,4 +1,4 @@ |
| 18 | -bcma-y += main.o scan.o core.o |
| 19 | +bcma-y += main.o scan.o core.o sprom.o |
| 20 | bcma-y += driver_chipcommon.o driver_chipcommon_pmu.o |
| 21 | bcma-y += driver_pci.o |
| 22 | bcma-$(CONFIG_BCMA_HOST_PCI) += host_pci.o |
| 23 | --- a/drivers/bcma/bcma_private.h |
| 24 | +++ b/drivers/bcma/bcma_private.h |
| 25 | @@ -13,12 +13,15 @@ |
| 26 | struct bcma_bus; |
| 27 | |
| 28 | /* main.c */ |
| 29 | -extern int bcma_bus_register(struct bcma_bus *bus); |
| 30 | -extern void bcma_bus_unregister(struct bcma_bus *bus); |
| 31 | +int bcma_bus_register(struct bcma_bus *bus); |
| 32 | +void bcma_bus_unregister(struct bcma_bus *bus); |
| 33 | |
| 34 | /* scan.c */ |
| 35 | int bcma_bus_scan(struct bcma_bus *bus); |
| 36 | |
| 37 | +/* sprom.c */ |
| 38 | +int bcma_sprom_get(struct bcma_bus *bus); |
| 39 | + |
| 40 | #ifdef CONFIG_BCMA_HOST_PCI |
| 41 | /* host_pci.c */ |
| 42 | extern int __init bcma_host_pci_init(void); |
| 43 | --- a/drivers/bcma/core.c |
| 44 | +++ b/drivers/bcma/core.c |
| 45 | @@ -19,7 +19,7 @@ bool bcma_core_is_enabled(struct bcma_de |
| 46 | } |
| 47 | EXPORT_SYMBOL_GPL(bcma_core_is_enabled); |
| 48 | |
| 49 | -static void bcma_core_disable(struct bcma_device *core, u32 flags) |
| 50 | +void bcma_core_disable(struct bcma_device *core, u32 flags) |
| 51 | { |
| 52 | if (bcma_aread32(core, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET) |
| 53 | return; |
| 54 | @@ -31,6 +31,7 @@ static void bcma_core_disable(struct bcm |
| 55 | bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET); |
| 56 | udelay(1); |
| 57 | } |
| 58 | +EXPORT_SYMBOL_GPL(bcma_core_disable); |
| 59 | |
| 60 | int bcma_core_enable(struct bcma_device *core, u32 flags) |
| 61 | { |
| 62 | --- a/drivers/bcma/driver_chipcommon_pmu.c |
| 63 | +++ b/drivers/bcma/driver_chipcommon_pmu.c |
| 64 | @@ -53,6 +53,7 @@ static void bcma_pmu_resources_init(stru |
| 65 | max_msk = 0xFFFF; |
| 66 | break; |
| 67 | case 43224: |
| 68 | + case 43225: |
| 69 | break; |
| 70 | default: |
| 71 | pr_err("PMU resource config unknown for device 0x%04X\n", |
| 72 | @@ -74,6 +75,7 @@ void bcma_pmu_swreg_init(struct bcma_drv |
| 73 | case 0x4313: |
| 74 | case 0x4331: |
| 75 | case 43224: |
| 76 | + case 43225: |
| 77 | break; |
| 78 | default: |
| 79 | pr_err("PMU switch/regulators init unknown for device " |
| 80 | @@ -96,11 +98,13 @@ void bcma_pmu_workarounds(struct bcma_dr |
| 81 | if (bus->chipinfo.rev == 0) { |
| 82 | pr_err("Workarounds for 43224 rev 0 not fully " |
| 83 | "implemented\n"); |
| 84 | - bcma_chipco_chipctl_maskset(cc, 0, ~0, 0xF0); |
| 85 | + bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x00F000F0); |
| 86 | } else { |
| 87 | bcma_chipco_chipctl_maskset(cc, 0, ~0, 0xF0); |
| 88 | } |
| 89 | break; |
| 90 | + case 43225: |
| 91 | + break; |
| 92 | default: |
| 93 | pr_err("Workarounds unknown for device 0x%04X\n", |
| 94 | bus->chipinfo.id); |
| 95 | --- a/drivers/bcma/driver_pci.c |
| 96 | +++ b/drivers/bcma/driver_pci.c |
| 97 | @@ -161,3 +161,27 @@ void bcma_core_pci_init(struct bcma_drv_ |
| 98 | { |
| 99 | bcma_pcicore_serdes_workaround(pc); |
| 100 | } |
| 101 | + |
| 102 | +int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, |
| 103 | + bool enable) |
| 104 | +{ |
| 105 | + struct pci_dev *pdev = pc->core->bus->host_pci; |
| 106 | + u32 coremask, tmp; |
| 107 | + int err; |
| 108 | + |
| 109 | + err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp); |
| 110 | + if (err) |
| 111 | + goto out; |
| 112 | + |
| 113 | + coremask = BIT(core->core_index) << 8; |
| 114 | + if (enable) |
| 115 | + tmp |= coremask; |
| 116 | + else |
| 117 | + tmp &= ~coremask; |
| 118 | + |
| 119 | + err = pci_write_config_dword(pdev, BCMA_PCI_IRQMASK, tmp); |
| 120 | + |
| 121 | +out: |
| 122 | + return err; |
| 123 | +} |
| 124 | +EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl); |
| 125 | --- a/drivers/bcma/host_pci.c |
| 126 | +++ b/drivers/bcma/host_pci.c |
| 127 | @@ -65,6 +65,54 @@ static void bcma_host_pci_write32(struct |
| 128 | iowrite32(value, core->bus->mmio + offset); |
| 129 | } |
| 130 | |
| 131 | +#ifdef CONFIG_BCMA_BLOCKIO |
| 132 | +void bcma_host_pci_block_read(struct bcma_device *core, void *buffer, |
| 133 | + size_t count, u16 offset, u8 reg_width) |
| 134 | +{ |
| 135 | + void __iomem *addr = core->bus->mmio + offset; |
| 136 | + if (core->bus->mapped_core != core) |
| 137 | + bcma_host_pci_switch_core(core); |
| 138 | + switch (reg_width) { |
| 139 | + case sizeof(u8): |
| 140 | + ioread8_rep(addr, buffer, count); |
| 141 | + break; |
| 142 | + case sizeof(u16): |
| 143 | + WARN_ON(count & 1); |
| 144 | + ioread16_rep(addr, buffer, count >> 1); |
| 145 | + break; |
| 146 | + case sizeof(u32): |
| 147 | + WARN_ON(count & 3); |
| 148 | + ioread32_rep(addr, buffer, count >> 2); |
| 149 | + break; |
| 150 | + default: |
| 151 | + WARN_ON(1); |
| 152 | + } |
| 153 | +} |
| 154 | + |
| 155 | +void bcma_host_pci_block_write(struct bcma_device *core, const void *buffer, |
| 156 | + size_t count, u16 offset, u8 reg_width) |
| 157 | +{ |
| 158 | + void __iomem *addr = core->bus->mmio + offset; |
| 159 | + if (core->bus->mapped_core != core) |
| 160 | + bcma_host_pci_switch_core(core); |
| 161 | + switch (reg_width) { |
| 162 | + case sizeof(u8): |
| 163 | + iowrite8_rep(addr, buffer, count); |
| 164 | + break; |
| 165 | + case sizeof(u16): |
| 166 | + WARN_ON(count & 1); |
| 167 | + iowrite16_rep(addr, buffer, count >> 1); |
| 168 | + break; |
| 169 | + case sizeof(u32): |
| 170 | + WARN_ON(count & 3); |
| 171 | + iowrite32_rep(addr, buffer, count >> 2); |
| 172 | + break; |
| 173 | + default: |
| 174 | + WARN_ON(1); |
| 175 | + } |
| 176 | +} |
| 177 | +#endif |
| 178 | + |
| 179 | static u32 bcma_host_pci_aread32(struct bcma_device *core, u16 offset) |
| 180 | { |
| 181 | if (core->bus->mapped_core != core) |
| 182 | @@ -87,6 +135,10 @@ const struct bcma_host_ops bcma_host_pci |
| 183 | .write8 = bcma_host_pci_write8, |
| 184 | .write16 = bcma_host_pci_write16, |
| 185 | .write32 = bcma_host_pci_write32, |
| 186 | +#ifdef CONFIG_BCMA_BLOCKIO |
| 187 | + .block_read = bcma_host_pci_block_read, |
| 188 | + .block_write = bcma_host_pci_block_write, |
| 189 | +#endif |
| 190 | .aread32 = bcma_host_pci_aread32, |
| 191 | .awrite32 = bcma_host_pci_awrite32, |
| 192 | }; |
| 193 | @@ -175,6 +227,7 @@ static DEFINE_PCI_DEVICE_TABLE(bcma_pci_ |
| 194 | { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x0576) }, |
| 195 | { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) }, |
| 196 | { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) }, |
| 197 | + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) }, |
| 198 | { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) }, |
| 199 | { 0, }, |
| 200 | }; |
| 201 | --- a/drivers/bcma/main.c |
| 202 | +++ b/drivers/bcma/main.c |
| 203 | @@ -7,6 +7,7 @@ |
| 204 | |
| 205 | #include "bcma_private.h" |
| 206 | #include <linux/bcma/bcma.h> |
| 207 | +#include <linux/slab.h> |
| 208 | |
| 209 | MODULE_DESCRIPTION("Broadcom's specific AMBA driver"); |
| 210 | MODULE_LICENSE("GPL"); |
| 211 | @@ -89,6 +90,8 @@ static int bcma_register_cores(struct bc |
| 212 | switch (bus->hosttype) { |
| 213 | case BCMA_HOSTTYPE_PCI: |
| 214 | core->dev.parent = &bus->host_pci->dev; |
| 215 | + core->dma_dev = &bus->host_pci->dev; |
| 216 | + core->irq = bus->host_pci->irq; |
| 217 | break; |
| 218 | case BCMA_HOSTTYPE_NONE: |
| 219 | case BCMA_HOSTTYPE_SDIO: |
| 220 | @@ -144,6 +147,13 @@ int bcma_bus_register(struct bcma_bus *b |
| 221 | bcma_core_pci_init(&bus->drv_pci); |
| 222 | } |
| 223 | |
| 224 | + /* Try to get SPROM */ |
| 225 | + err = bcma_sprom_get(bus); |
| 226 | + if (err) { |
| 227 | + pr_err("Failed to get SPROM: %d\n", err); |
| 228 | + return -ENOENT; |
| 229 | + } |
| 230 | + |
| 231 | /* Register found cores */ |
| 232 | bcma_register_cores(bus); |
| 233 | |
| 234 | @@ -151,13 +161,11 @@ int bcma_bus_register(struct bcma_bus *b |
| 235 | |
| 236 | return 0; |
| 237 | } |
| 238 | -EXPORT_SYMBOL_GPL(bcma_bus_register); |
| 239 | |
| 240 | void bcma_bus_unregister(struct bcma_bus *bus) |
| 241 | { |
| 242 | bcma_unregister_cores(bus); |
| 243 | } |
| 244 | -EXPORT_SYMBOL_GPL(bcma_bus_unregister); |
| 245 | |
| 246 | int __bcma_driver_register(struct bcma_driver *drv, struct module *owner) |
| 247 | { |
| 248 | --- /dev/null |
| 249 | +++ b/drivers/bcma/sprom.c |
| 250 | @@ -0,0 +1,162 @@ |
| 251 | +/* |
| 252 | + * Broadcom specific AMBA |
| 253 | + * SPROM reading |
| 254 | + * |
| 255 | + * Licensed under the GNU/GPL. See COPYING for details. |
| 256 | + */ |
| 257 | + |
| 258 | +#include "bcma_private.h" |
| 259 | + |
| 260 | +#include <linux/bcma/bcma.h> |
| 261 | +#include <linux/bcma/bcma_regs.h> |
| 262 | +#include <linux/pci.h> |
| 263 | +#include <linux/io.h> |
| 264 | +#include <linux/dma-mapping.h> |
| 265 | +#include <linux/slab.h> |
| 266 | + |
| 267 | +#define SPOFF(offset) ((offset) / sizeof(u16)) |
| 268 | + |
| 269 | +/************************************************** |
| 270 | + * R/W ops. |
| 271 | + **************************************************/ |
| 272 | + |
| 273 | +static void bcma_sprom_read(struct bcma_bus *bus, u16 *sprom) |
| 274 | +{ |
| 275 | + int i; |
| 276 | + for (i = 0; i < SSB_SPROMSIZE_WORDS_R4; i++) |
| 277 | + sprom[i] = bcma_read16(bus->drv_cc.core, |
| 278 | + BCMA_CC_SPROM + (i * 2)); |
| 279 | +} |
| 280 | + |
| 281 | +/************************************************** |
| 282 | + * Validation. |
| 283 | + **************************************************/ |
| 284 | + |
| 285 | +static inline u8 bcma_crc8(u8 crc, u8 data) |
| 286 | +{ |
| 287 | + /* Polynomial: x^8 + x^7 + x^6 + x^4 + x^2 + 1 */ |
| 288 | + static const u8 t[] = { |
| 289 | + 0x00, 0xF7, 0xB9, 0x4E, 0x25, 0xD2, 0x9C, 0x6B, |
| 290 | + 0x4A, 0xBD, 0xF3, 0x04, 0x6F, 0x98, 0xD6, 0x21, |
| 291 | + 0x94, 0x63, 0x2D, 0xDA, 0xB1, 0x46, 0x08, 0xFF, |
| 292 | + 0xDE, 0x29, 0x67, 0x90, 0xFB, 0x0C, 0x42, 0xB5, |
| 293 | + 0x7F, 0x88, 0xC6, 0x31, 0x5A, 0xAD, 0xE3, 0x14, |
| 294 | + 0x35, 0xC2, 0x8C, 0x7B, 0x10, 0xE7, 0xA9, 0x5E, |
| 295 | + 0xEB, 0x1C, 0x52, 0xA5, 0xCE, 0x39, 0x77, 0x80, |
| 296 | + 0xA1, 0x56, 0x18, 0xEF, 0x84, 0x73, 0x3D, 0xCA, |
| 297 | + 0xFE, 0x09, 0x47, 0xB0, 0xDB, 0x2C, 0x62, 0x95, |
| 298 | + 0xB4, 0x43, 0x0D, 0xFA, 0x91, 0x66, 0x28, 0xDF, |
| 299 | + 0x6A, 0x9D, 0xD3, 0x24, 0x4F, 0xB8, 0xF6, 0x01, |
| 300 | + 0x20, 0xD7, 0x99, 0x6E, 0x05, 0xF2, 0xBC, 0x4B, |
| 301 | + 0x81, 0x76, 0x38, 0xCF, 0xA4, 0x53, 0x1D, 0xEA, |
| 302 | + 0xCB, 0x3C, 0x72, 0x85, 0xEE, 0x19, 0x57, 0xA0, |
| 303 | + 0x15, 0xE2, 0xAC, 0x5B, 0x30, 0xC7, 0x89, 0x7E, |
| 304 | + 0x5F, 0xA8, 0xE6, 0x11, 0x7A, 0x8D, 0xC3, 0x34, |
| 305 | + 0xAB, 0x5C, 0x12, 0xE5, 0x8E, 0x79, 0x37, 0xC0, |
| 306 | + 0xE1, 0x16, 0x58, 0xAF, 0xC4, 0x33, 0x7D, 0x8A, |
| 307 | + 0x3F, 0xC8, 0x86, 0x71, 0x1A, 0xED, 0xA3, 0x54, |
| 308 | + 0x75, 0x82, 0xCC, 0x3B, 0x50, 0xA7, 0xE9, 0x1E, |
| 309 | + 0xD4, 0x23, 0x6D, 0x9A, 0xF1, 0x06, 0x48, 0xBF, |
| 310 | + 0x9E, 0x69, 0x27, 0xD0, 0xBB, 0x4C, 0x02, 0xF5, |
| 311 | + 0x40, 0xB7, 0xF9, 0x0E, 0x65, 0x92, 0xDC, 0x2B, |
| 312 | + 0x0A, 0xFD, 0xB3, 0x44, 0x2F, 0xD8, 0x96, 0x61, |
| 313 | + 0x55, 0xA2, 0xEC, 0x1B, 0x70, 0x87, 0xC9, 0x3E, |
| 314 | + 0x1F, 0xE8, 0xA6, 0x51, 0x3A, 0xCD, 0x83, 0x74, |
| 315 | + 0xC1, 0x36, 0x78, 0x8F, 0xE4, 0x13, 0x5D, 0xAA, |
| 316 | + 0x8B, 0x7C, 0x32, 0xC5, 0xAE, 0x59, 0x17, 0xE0, |
| 317 | + 0x2A, 0xDD, 0x93, 0x64, 0x0F, 0xF8, 0xB6, 0x41, |
| 318 | + 0x60, 0x97, 0xD9, 0x2E, 0x45, 0xB2, 0xFC, 0x0B, |
| 319 | + 0xBE, 0x49, 0x07, 0xF0, 0x9B, 0x6C, 0x22, 0xD5, |
| 320 | + 0xF4, 0x03, 0x4D, 0xBA, 0xD1, 0x26, 0x68, 0x9F, |
| 321 | + }; |
| 322 | + return t[crc ^ data]; |
| 323 | +} |
| 324 | + |
| 325 | +static u8 bcma_sprom_crc(const u16 *sprom) |
| 326 | +{ |
| 327 | + int word; |
| 328 | + u8 crc = 0xFF; |
| 329 | + |
| 330 | + for (word = 0; word < SSB_SPROMSIZE_WORDS_R4 - 1; word++) { |
| 331 | + crc = bcma_crc8(crc, sprom[word] & 0x00FF); |
| 332 | + crc = bcma_crc8(crc, (sprom[word] & 0xFF00) >> 8); |
| 333 | + } |
| 334 | + crc = bcma_crc8(crc, sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & 0x00FF); |
| 335 | + crc ^= 0xFF; |
| 336 | + |
| 337 | + return crc; |
| 338 | +} |
| 339 | + |
| 340 | +static int bcma_sprom_check_crc(const u16 *sprom) |
| 341 | +{ |
| 342 | + u8 crc; |
| 343 | + u8 expected_crc; |
| 344 | + u16 tmp; |
| 345 | + |
| 346 | + crc = bcma_sprom_crc(sprom); |
| 347 | + tmp = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_CRC; |
| 348 | + expected_crc = tmp >> SSB_SPROM_REVISION_CRC_SHIFT; |
| 349 | + if (crc != expected_crc) |
| 350 | + return -EPROTO; |
| 351 | + |
| 352 | + return 0; |
| 353 | +} |
| 354 | + |
| 355 | +static int bcma_sprom_valid(const u16 *sprom) |
| 356 | +{ |
| 357 | + u16 revision; |
| 358 | + int err; |
| 359 | + |
| 360 | + err = bcma_sprom_check_crc(sprom); |
| 361 | + if (err) |
| 362 | + return err; |
| 363 | + |
| 364 | + revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_REV; |
| 365 | + if (revision != 8) { |
| 366 | + pr_err("Unsupported SPROM revision: %d\n", revision); |
| 367 | + return -ENOENT; |
| 368 | + } |
| 369 | + |
| 370 | + return 0; |
| 371 | +} |
| 372 | + |
| 373 | +/************************************************** |
| 374 | + * SPROM extraction. |
| 375 | + **************************************************/ |
| 376 | + |
| 377 | +static void bcma_sprom_extract_r8(struct bcma_bus *bus, const u16 *sprom) |
| 378 | +{ |
| 379 | + u16 v; |
| 380 | + int i; |
| 381 | + |
| 382 | + for (i = 0; i < 3; i++) { |
| 383 | + v = sprom[SPOFF(SSB_SPROM8_IL0MAC) + i]; |
| 384 | + *(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v); |
| 385 | + } |
| 386 | +} |
| 387 | + |
| 388 | +int bcma_sprom_get(struct bcma_bus *bus) |
| 389 | +{ |
| 390 | + u16 *sprom; |
| 391 | + int err = 0; |
| 392 | + |
| 393 | + if (!bus->drv_cc.core) |
| 394 | + return -EOPNOTSUPP; |
| 395 | + |
| 396 | + sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), |
| 397 | + GFP_KERNEL); |
| 398 | + if (!sprom) |
| 399 | + return -ENOMEM; |
| 400 | + |
| 401 | + bcma_sprom_read(bus, sprom); |
| 402 | + |
| 403 | + err = bcma_sprom_valid(sprom); |
| 404 | + if (err) |
| 405 | + goto out; |
| 406 | + |
| 407 | + bcma_sprom_extract_r8(bus, sprom); |
| 408 | + |
| 409 | +out: |
| 410 | + kfree(sprom); |
| 411 | + return err; |
| 412 | +} |
| 413 | --- a/include/linux/bcma/bcma.h |
| 414 | +++ b/include/linux/bcma/bcma.h |
| 415 | @@ -6,6 +6,7 @@ |
| 416 | |
| 417 | #include <linux/bcma/bcma_driver_chipcommon.h> |
| 418 | #include <linux/bcma/bcma_driver_pci.h> |
| 419 | +#include <linux/ssb/ssb.h> /* SPROM sharing */ |
| 420 | |
| 421 | #include "bcma_regs.h" |
| 422 | |
| 423 | @@ -31,6 +32,12 @@ struct bcma_host_ops { |
| 424 | void (*write8)(struct bcma_device *core, u16 offset, u8 value); |
| 425 | void (*write16)(struct bcma_device *core, u16 offset, u16 value); |
| 426 | void (*write32)(struct bcma_device *core, u16 offset, u32 value); |
| 427 | +#ifdef CONFIG_BCMA_BLOCKIO |
| 428 | + void (*block_read)(struct bcma_device *core, void *buffer, |
| 429 | + size_t count, u16 offset, u8 reg_width); |
| 430 | + void (*block_write)(struct bcma_device *core, const void *buffer, |
| 431 | + size_t count, u16 offset, u8 reg_width); |
| 432 | +#endif |
| 433 | /* Agent ops */ |
| 434 | u32 (*aread32)(struct bcma_device *core, u16 offset); |
| 435 | void (*awrite32)(struct bcma_device *core, u16 offset, u32 value); |
| 436 | @@ -117,6 +124,8 @@ struct bcma_device { |
| 437 | struct bcma_device_id id; |
| 438 | |
| 439 | struct device dev; |
| 440 | + struct device *dma_dev; |
| 441 | + unsigned int irq; |
| 442 | bool dev_registered; |
| 443 | |
| 444 | u8 core_index; |
| 445 | @@ -179,6 +188,10 @@ struct bcma_bus { |
| 446 | |
| 447 | struct bcma_drv_cc drv_cc; |
| 448 | struct bcma_drv_pci drv_pci; |
| 449 | + |
| 450 | + /* We decided to share SPROM struct with SSB as long as we do not need |
| 451 | + * any hacks for BCMA. This simplifies drivers code. */ |
| 452 | + struct ssb_sprom sprom; |
| 453 | }; |
| 454 | |
| 455 | extern inline u32 bcma_read8(struct bcma_device *core, u16 offset) |
| 456 | @@ -208,6 +221,18 @@ void bcma_write32(struct bcma_device *co |
| 457 | { |
| 458 | core->bus->ops->write32(core, offset, value); |
| 459 | } |
| 460 | +#ifdef CONFIG_BCMA_BLOCKIO |
| 461 | +extern inline void bcma_block_read(struct bcma_device *core, void *buffer, |
| 462 | + size_t count, u16 offset, u8 reg_width) |
| 463 | +{ |
| 464 | + core->bus->ops->block_read(core, buffer, count, offset, reg_width); |
| 465 | +} |
| 466 | +extern inline void bcma_block_write(struct bcma_device *core, const void *buffer, |
| 467 | + size_t count, u16 offset, u8 reg_width) |
| 468 | +{ |
| 469 | + core->bus->ops->block_write(core, buffer, count, offset, reg_width); |
| 470 | +} |
| 471 | +#endif |
| 472 | extern inline u32 bcma_aread32(struct bcma_device *core, u16 offset) |
| 473 | { |
| 474 | return core->bus->ops->aread32(core, offset); |
| 475 | @@ -219,6 +244,7 @@ void bcma_awrite32(struct bcma_device *c |
| 476 | } |
| 477 | |
| 478 | extern bool bcma_core_is_enabled(struct bcma_device *core); |
| 479 | +extern void bcma_core_disable(struct bcma_device *core, u32 flags); |
| 480 | extern int bcma_core_enable(struct bcma_device *core, u32 flags); |
| 481 | |
| 482 | #endif /* LINUX_BCMA_H_ */ |
| 483 | --- a/include/linux/bcma/bcma_driver_chipcommon.h |
| 484 | +++ b/include/linux/bcma/bcma_driver_chipcommon.h |
| 485 | @@ -244,6 +244,7 @@ |
| 486 | #define BCMA_CC_REGCTL_DATA 0x065C |
| 487 | #define BCMA_CC_PLLCTL_ADDR 0x0660 |
| 488 | #define BCMA_CC_PLLCTL_DATA 0x0664 |
| 489 | +#define BCMA_CC_SPROM 0x0830 /* SPROM beginning */ |
| 490 | |
| 491 | /* Data for the PMU, if available. |
| 492 | * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) |
| 493 | --- a/include/linux/bcma/bcma_driver_pci.h |
| 494 | +++ b/include/linux/bcma/bcma_driver_pci.h |
| 495 | @@ -85,5 +85,7 @@ struct bcma_drv_pci { |
| 496 | #define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val) |
| 497 | |
| 498 | extern void bcma_core_pci_init(struct bcma_drv_pci *pc); |
| 499 | +extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, |
| 500 | + struct bcma_device *core, bool enable); |
| 501 | |
| 502 | #endif /* LINUX_BCMA_DRIVER_PCI_H_ */ |
| 503 | |