| 1 | This patch adds a new MFD driver for the RDC321x southbridge. This southbridge |
| 2 | is always present in the RDC321x System-on-a-Chip and provides access to some |
| 3 | GPIOs as well as a watchdog. Access to these two functions is done using the |
| 4 | southbridge PCI device configuration space. |
| 5 | |
| 6 | Signed-off-by: Florian Fainelli <florian@openwrt.org> |
| 7 | --- |
| 8 | Changes from v2: |
| 9 | - pass the pci_dev pointer to MFD cell drivers as platform_data |
| 10 | - remove the printk(KERN_ERR and use dev_err instead |
| 11 | - removed pci_dev accessors |
| 12 | - use DEFINE_PCI_DEVICE_TABLE |
| 13 | |
| 14 | --- a/drivers/mfd/Kconfig |
| 15 | +++ b/drivers/mfd/Kconfig |
| 16 | @@ -305,6 +305,15 @@ config EZX_PCAP |
| 17 | This enables the PCAP ASIC present on EZX Phones. This is |
| 18 | needed for MMC, TouchScreen, Sound, USB, etc.. |
| 19 | |
| 20 | +config MFD_RDC321X |
| 21 | + tristate "Support for RDC-R321x southbridge" |
| 22 | + select MFD_CORE |
| 23 | + depends on PCI |
| 24 | + help |
| 25 | + Say yes here if you want to have support for the RDC R-321x SoC |
| 26 | + southbridge which provides access to GPIOs and Watchdog using the |
| 27 | + southbridge PCI device configuration space. |
| 28 | + |
| 29 | endmenu |
| 30 | |
| 31 | menu "Multimedia Capabilities Port drivers" |
| 32 | --- a/drivers/mfd/Makefile |
| 33 | +++ b/drivers/mfd/Makefile |
| 34 | @@ -50,3 +50,5 @@ obj-$(CONFIG_PCF50633_ADC) += pcf50633-a |
| 35 | obj-$(CONFIG_PCF50633_GPIO) += pcf50633-gpio.o |
| 36 | obj-$(CONFIG_AB3100_CORE) += ab3100-core.o |
| 37 | obj-$(CONFIG_AB3100_OTP) += ab3100-otp.o |
| 38 | + |
| 39 | +obj-$(CONFIG_MFD_RDC321X) += rdc321x-southbridge.o |
| 40 | --- /dev/null |
| 41 | +++ b/drivers/mfd/rdc321x-southbridge.c |
| 42 | @@ -0,0 +1,123 @@ |
| 43 | +/* |
| 44 | + * RDC321x MFD southbrige driver |
| 45 | + * |
| 46 | + * Copyright (C) 2007-2010 Florian Fainelli <florian@openwrt.org> |
| 47 | + * Copyright (C) 2010 Bernhard Loos <bernhardloos@googlemail.com> |
| 48 | + * |
| 49 | + * This program is free software; you can redistribute it and/or modify |
| 50 | + * it under the terms of the GNU General Public License as published by |
| 51 | + * the Free Software Foundation; either version 2 of the License, or |
| 52 | + * (at your option) any later version. |
| 53 | + * |
| 54 | + * This program is distributed in the hope that it will be useful, |
| 55 | + * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 56 | + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 57 | + * GNU General Public License for more details. |
| 58 | + * |
| 59 | + * You should have received a copy of the GNU General Public License |
| 60 | + * along with this program; if not, write to the Free Software |
| 61 | + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| 62 | + * |
| 63 | + */ |
| 64 | +#include <linux/init.h> |
| 65 | +#include <linux/module.h> |
| 66 | +#include <linux/kernel.h> |
| 67 | +#include <linux/platform_device.h> |
| 68 | +#include <linux/pci.h> |
| 69 | +#include <linux/mfd/core.h> |
| 70 | +#include <linux/mfd/rdc321x.h> |
| 71 | + |
| 72 | +static struct rdc321x_wdt_pdata rdc321x_wdt_pdata; |
| 73 | + |
| 74 | +static struct resource rdc321x_wdt_resource[] = { |
| 75 | + { |
| 76 | + .name = "wdt-reg", |
| 77 | + .start = RDC321X_WDT_CTRL, |
| 78 | + .end = RDC321X_WDT_CTRL + 0x3, |
| 79 | + .flags = IORESOURCE_IO, |
| 80 | + } |
| 81 | +}; |
| 82 | + |
| 83 | +static struct rdc321x_gpio_pdata rdc321x_gpio_pdata = { |
| 84 | + .max_gpios = RDC321X_MAX_GPIO, |
| 85 | +}; |
| 86 | + |
| 87 | +static struct resource rdc321x_gpio_resources[] = { |
| 88 | + { |
| 89 | + .name = "gpio-reg1", |
| 90 | + .start = RDC321X_GPIO_CTRL_REG1, |
| 91 | + .end = RDC321X_GPIO_CTRL_REG1 + 0x7, |
| 92 | + .flags = IORESOURCE_IO, |
| 93 | + }, { |
| 94 | + .name = "gpio-reg2", |
| 95 | + .start = RDC321X_GPIO_CTRL_REG2, |
| 96 | + .end = RDC321X_GPIO_CTRL_REG2 + 0x7, |
| 97 | + .flags = IORESOURCE_IO, |
| 98 | + } |
| 99 | +}; |
| 100 | + |
| 101 | +static struct mfd_cell rdc321x_sb_cells[] = { |
| 102 | + { |
| 103 | + .name = "rdc321x-wdt", |
| 104 | + .resources = rdc321x_wdt_resource, |
| 105 | + .num_resources = ARRAY_SIZE(rdc321x_wdt_resource), |
| 106 | + .driver_data = &rdc321x_wdt_pdata, |
| 107 | + }, { |
| 108 | + .name = "rdc321x-gpio", |
| 109 | + .resources = rdc321x_gpio_resources, |
| 110 | + .num_resources = ARRAY_SIZE(rdc321x_gpio_resources), |
| 111 | + .driver_data = &rdc321x_gpio_pdata, |
| 112 | + }, |
| 113 | +}; |
| 114 | + |
| 115 | +static int __devinit rdc321x_sb_probe(struct pci_dev *pdev, |
| 116 | + const struct pci_device_id *ent) |
| 117 | +{ |
| 118 | + int err; |
| 119 | + |
| 120 | + err = pci_enable_device(pdev); |
| 121 | + if (err) { |
| 122 | + dev_err(&pdev->dev, "failed to enable device\n"); |
| 123 | + return err; |
| 124 | + } |
| 125 | + |
| 126 | + rdc321x_gpio_pdata.sb_pdev = pdev; |
| 127 | + rdc321x_wdt_pdata.sb_pdev = pdev; |
| 128 | + |
| 129 | + return mfd_add_devices(&pdev->dev, -1, |
| 130 | + rdc321x_sb_cells, ARRAY_SIZE(rdc321x_sb_cells), NULL, 0); |
| 131 | +} |
| 132 | + |
| 133 | +static void __devexit rdc321x_sb_remove(struct pci_dev *pdev) |
| 134 | +{ |
| 135 | + mfd_remove_devices(&pdev->dev); |
| 136 | +} |
| 137 | + |
| 138 | +static DEFINE_PCI_DEVICE_TABLE(rdc321x_sb_table) = { |
| 139 | + { PCI_DEVICE(PCI_VENDOR_ID_RDC, PCI_DEVICE_ID_RDC_R6030) }, |
| 140 | + {} |
| 141 | +}; |
| 142 | + |
| 143 | +static struct pci_driver rdc321x_sb_driver = { |
| 144 | + .name = "RDC321x Southbridge", |
| 145 | + .id_table = rdc321x_sb_table, |
| 146 | + .probe = rdc321x_sb_probe, |
| 147 | + .remove = __devexit_p(rdc321x_sb_remove), |
| 148 | +}; |
| 149 | + |
| 150 | +static int __init rdc321x_sb_init(void) |
| 151 | +{ |
| 152 | + return pci_register_driver(&rdc321x_sb_driver); |
| 153 | +} |
| 154 | + |
| 155 | +static void __exit rdc321x_sb_exit(void) |
| 156 | +{ |
| 157 | + pci_unregister_driver(&rdc321x_sb_driver); |
| 158 | +} |
| 159 | + |
| 160 | +module_init(rdc321x_sb_init); |
| 161 | +module_exit(rdc321x_sb_exit); |
| 162 | + |
| 163 | +MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>"); |
| 164 | +MODULE_LICENSE("GPL"); |
| 165 | +MODULE_DESCRIPTION("RDC R-321x MFD southbridge driver"); |
| 166 | --- /dev/null |
| 167 | +++ b/include/linux/mfd/rdc321x.h |
| 168 | @@ -0,0 +1,26 @@ |
| 169 | +#ifndef __RDC321X_MFD_H |
| 170 | +#define __RDC321X_MFD_H |
| 171 | + |
| 172 | +#include <linux/types.h> |
| 173 | +#include <linux/pci.h> |
| 174 | + |
| 175 | +/* Offsets to be accessed in the southbridge PCI |
| 176 | + * device configuration register */ |
| 177 | +#define RDC321X_WDT_CTRL 0x44 |
| 178 | +#define RDC321X_GPIO_CTRL_REG1 0x48 |
| 179 | +#define RDC321X_GPIO_DATA_REG1 0x4c |
| 180 | +#define RDC321X_GPIO_CTRL_REG2 0x84 |
| 181 | +#define RDC321X_GPIO_DATA_REG2 0x88 |
| 182 | + |
| 183 | +#define RDC321X_MAX_GPIO 58 |
| 184 | + |
| 185 | +struct rdc321x_gpio_pdata { |
| 186 | + struct pci_dev *sb_pdev; |
| 187 | + unsigned max_gpios; |
| 188 | +}; |
| 189 | + |
| 190 | +struct rdc321x_wdt_pdata { |
| 191 | + struct pci_dev *sb_pdev; |
| 192 | +}; |
| 193 | + |
| 194 | +#endif /* __RDC321X_MFD_H */ |
| 195 | |