| 1 | --- a/arch/mips/lantiq/machtypes.h |
| 2 | +++ b/arch/mips/lantiq/machtypes.h |
| 3 | @@ -40,6 +40,9 @@ |
| 4 | |
| 5 | /* Gigaset */ |
| 6 | LANTIQ_MACH_GIGASX76X, /* Gigaset SX76x */ |
| 7 | + |
| 8 | + /* Buffalo */ |
| 9 | + LANTIQ_MACH_WBMR, /* WBMR-HP-G300H */ |
| 10 | }; |
| 11 | |
| 12 | #endif |
| 13 | --- a/arch/mips/lantiq/xway/Kconfig |
| 14 | +++ b/arch/mips/lantiq/xway/Kconfig |
| 15 | @@ -19,6 +19,11 @@ |
| 16 | select LTQ_DEV_GPIO_BUTTONS |
| 17 | default y |
| 18 | |
| 19 | +config LANTIQ_MACH_WBMR |
| 20 | + bool "WBMR-HP-G300H" |
| 21 | + select LTQ_DEV_GPIO_BUTTONS |
| 22 | + default y |
| 23 | + |
| 24 | endmenu |
| 25 | |
| 26 | endif |
| 27 | --- a/arch/mips/lantiq/xway/Makefile |
| 28 | +++ b/arch/mips/lantiq/xway/Makefile |
| 29 | @@ -8,4 +8,5 @@ |
| 30 | obj-$(CONFIG_LANTIQ_MACH_ARV45XX) += mach-arv45xx.o |
| 31 | obj-$(CONFIG_LANTIQ_MACH_NETGEAR) += mach-netgear.o |
| 32 | obj-$(CONFIG_LANTIQ_MACH_GIGASX76X) += mach-gigasx76x.o |
| 33 | +obj-$(CONFIG_LANTIQ_MACH_WBMR) += mach-wbmr.o |
| 34 | obj-y += dev-dwc_otg.o |
| 35 | --- /dev/null |
| 36 | +++ b/arch/mips/lantiq/xway/mach-wbmr.c |
| 37 | @@ -0,0 +1,120 @@ |
| 38 | +/* |
| 39 | + * This program is free software; you can redistribute it and/or modify it |
| 40 | + * under the terms of the GNU General Public License version 2 as published |
| 41 | + * by the Free Software Foundation. |
| 42 | + * |
| 43 | + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> |
| 44 | + */ |
| 45 | + |
| 46 | +#include <linux/init.h> |
| 47 | +#include <linux/platform_device.h> |
| 48 | +#include <linux/leds.h> |
| 49 | +#include <linux/gpio.h> |
| 50 | +#include <linux/gpio_buttons.h> |
| 51 | +#include <linux/mtd/mtd.h> |
| 52 | +#include <linux/mtd/partitions.h> |
| 53 | +#include <linux/mtd/physmap.h> |
| 54 | +#include <linux/input.h> |
| 55 | + |
| 56 | +#include <lantiq_soc.h> |
| 57 | +#include <irq.h> |
| 58 | + |
| 59 | +#include "../machtypes.h" |
| 60 | +#include "devices.h" |
| 61 | +#include "dev-leds-gpio.h" |
| 62 | +#include "dev-dwc_otg.h" |
| 63 | +#include "../dev-gpio-buttons.h" |
| 64 | + |
| 65 | +static struct mtd_partition wbmr_partitions[] = |
| 66 | +{ |
| 67 | + { |
| 68 | + .name = "uboot", |
| 69 | + .offset = 0x0, |
| 70 | + .size = 0x40000, |
| 71 | + }, |
| 72 | + { |
| 73 | + .name = "uboot-env", |
| 74 | + .offset = 0x40000, |
| 75 | + .size = 0x20000, |
| 76 | + }, |
| 77 | + { |
| 78 | + .name = "linux", |
| 79 | + .offset = 0x60000, |
| 80 | + .size = 0x1f20000, |
| 81 | + }, |
| 82 | + { |
| 83 | + .name = "calibration", |
| 84 | + .offset = 0x1fe0000, |
| 85 | + .size = 0x20000, |
| 86 | + }, |
| 87 | +}; |
| 88 | + |
| 89 | +static struct physmap_flash_data wbmr_flash_data = { |
| 90 | + .nr_parts = ARRAY_SIZE(wbmr_partitions), |
| 91 | + .parts = wbmr_partitions, |
| 92 | +}; |
| 93 | + |
| 94 | +static struct gpio_led |
| 95 | +wbmr_leds_gpio[] __initdata = { |
| 96 | + { .name = "soc:blue:movie", .gpio = 20, .active_low = 1, }, |
| 97 | + { .name = "soc:red:internet", .gpio = 18, .active_low = 1, }, |
| 98 | + { .name = "soc:green:internet", .gpio = 17, .active_low = 1, }, |
| 99 | + { .name = "soc:green:adsl", .gpio = 16, .active_low = 1, }, |
| 100 | + { .name = "soc:green:wlan", .gpio = 15, .active_low = 1, }, |
| 101 | + { .name = "soc:red:security", .gpio = 14, .active_low = 1, }, |
| 102 | + { .name = "soc:green:power", .gpio = 1, .active_low = 1, }, |
| 103 | + { .name = "soc:red:power", .gpio = 5, .active_low = 1, }, |
| 104 | + { .name = "soc:green:usb", .gpio = 28, .active_low = 1, }, |
| 105 | +}; |
| 106 | + |
| 107 | +static struct gpio_keys_button |
| 108 | +wbmr_gpio_keys[] __initdata = { |
| 109 | + { |
| 110 | + .desc = "aoss", |
| 111 | + .type = EV_KEY, |
| 112 | + .code = BTN_0, |
| 113 | + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, |
| 114 | + .gpio = 0, |
| 115 | + .active_low = 1, |
| 116 | + }, |
| 117 | + { |
| 118 | + .desc = "reset", |
| 119 | + .type = EV_KEY, |
| 120 | + .code = BTN_1, |
| 121 | + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, |
| 122 | + .gpio = 37, |
| 123 | + .active_low = 1, |
| 124 | + }, |
| 125 | +}; |
| 126 | + |
| 127 | +static struct ltq_pci_data ltq_pci_data = { |
| 128 | + .clock = PCI_CLOCK_INT, |
| 129 | + .gpio = PCI_GNT1 | PCI_REQ1, |
| 130 | + .irq = { |
| 131 | + [14] = INT_NUM_IM0_IRL0 + 22, |
| 132 | + }, |
| 133 | +}; |
| 134 | + |
| 135 | +static struct ltq_eth_data ltq_eth_data = { |
| 136 | + .mii_mode = PHY_INTERFACE_MODE_MII, |
| 137 | +}; |
| 138 | + |
| 139 | +static void __init |
| 140 | +wbmr_init(void) |
| 141 | +{ |
| 142 | +#define WMBR_BRN_MAC 0x1fd0024 |
| 143 | + |
| 144 | + ltq_add_device_leds_gpio(-1, ARRAY_SIZE(wbmr_leds_gpio), wbmr_leds_gpio); |
| 145 | + ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, ARRAY_SIZE(wbmr_gpio_keys), wbmr_gpio_keys); |
| 146 | + ltq_register_nor(&wbmr_flash_data); |
| 147 | + ltq_register_pci(<q_pci_data); |
| 148 | + memcpy_fromio(<q_eth_data.mac.sa_data, |
| 149 | + (void *)KSEG1ADDR(LTQ_FLASH_START + WMBR_BRN_MAC), 6); |
| 150 | + ltq_register_etop(<q_eth_data); |
| 151 | + xway_register_dwc(36); |
| 152 | +} |
| 153 | + |
| 154 | +MIPS_MACHINE(LANTIQ_MACH_WBMR, |
| 155 | + "WBMR", |
| 156 | + "WBMR", |
| 157 | + wbmr_init); |
| 158 | |