| 1 | /* |
| 2 | * Argus ATP-52B router support |
| 3 | * http://www.argus-co.com/english/productsview.php?id=70&cid=81 |
| 4 | * |
| 5 | * Copyright (C) 2011 Roman Yeryomin <roman@advem.lv> |
| 6 | * |
| 7 | * This program is free software; you can redistribute it and/or modify it |
| 8 | * under the terms of the GNU General Public License version 2 as published |
| 9 | * by the Free Software Foundation. |
| 10 | */ |
| 11 | |
| 12 | #include <linux/init.h> |
| 13 | #include <linux/platform_device.h> |
| 14 | #include <linux/mtd/mtd.h> |
| 15 | #include <linux/mtd/partitions.h> |
| 16 | #include <linux/mtd/physmap.h> |
| 17 | |
| 18 | #include <asm/mach-ralink/machine.h> |
| 19 | #include <asm/mach-ralink/dev-gpio-buttons.h> |
| 20 | #include <asm/mach-ralink/dev-gpio-leds.h> |
| 21 | #include <asm/mach-ralink/rt305x.h> |
| 22 | #include <asm/mach-ralink/rt305x_regs.h> |
| 23 | |
| 24 | #include "devices.h" |
| 25 | |
| 26 | #define ARGUS_ATP52B_GPIO_LED_RUN 9 |
| 27 | #define ARGUS_ATP52B_GPIO_LED_NET 13 |
| 28 | #define ARGUS_ATP52B_GPIO_BUTTON_WPS 0 |
| 29 | #define ARGUS_ATP52B_GPIO_BUTTON_RESET 10 |
| 30 | #define ARGUS_ATP52B_BUTTONS_POLL_INTERVAL 20 |
| 31 | |
| 32 | static struct gpio_led argus_atp52b_leds_gpio[] __initdata = { |
| 33 | { |
| 34 | .name = "argus_atp52b:green:run", |
| 35 | .gpio = ARGUS_ATP52B_GPIO_LED_RUN, |
| 36 | .active_low = 1, |
| 37 | }, |
| 38 | { |
| 39 | .name = "argus_atp52b:amber:net", |
| 40 | .gpio = ARGUS_ATP52B_GPIO_LED_NET, |
| 41 | .active_low = 1, |
| 42 | } |
| 43 | }; |
| 44 | |
| 45 | static struct gpio_button argus_atp52b_gpio_buttons[] __initdata = { |
| 46 | { |
| 47 | .desc = "wps", |
| 48 | .type = EV_KEY, |
| 49 | .code = KEY_WPS_BUTTON, |
| 50 | .threshold = 3, |
| 51 | .gpio = ARGUS_ATP52B_GPIO_BUTTON_WPS, |
| 52 | .active_low = 1, |
| 53 | }, |
| 54 | { |
| 55 | .desc = "reset", |
| 56 | .type = EV_KEY, |
| 57 | .code = KEY_RESTART, |
| 58 | .threshold = 10, |
| 59 | .gpio = ARGUS_ATP52B_GPIO_BUTTON_RESET, |
| 60 | .active_low = 1, |
| 61 | } |
| 62 | }; |
| 63 | |
| 64 | #ifdef CONFIG_MTD_PARTITIONS |
| 65 | static struct mtd_partition argus_atp52b_partitions[] = { |
| 66 | { |
| 67 | .name = "bootloader", |
| 68 | .offset = 0, |
| 69 | .size = 0x030000, |
| 70 | .mask_flags = MTD_WRITEABLE, |
| 71 | }, { |
| 72 | .name = "config", |
| 73 | .offset = 0x030000, |
| 74 | .size = 0x010000, |
| 75 | .mask_flags = MTD_WRITEABLE, |
| 76 | }, { |
| 77 | .name = "factory", |
| 78 | .offset = 0x040000, |
| 79 | .size = 0x010000, |
| 80 | .mask_flags = MTD_WRITEABLE, |
| 81 | }, { |
| 82 | .name = "kernel", |
| 83 | .offset = 0x050000, |
| 84 | .size = 0x120000, |
| 85 | }, { |
| 86 | .name = "rootfs", |
| 87 | .offset = 0x170000, |
| 88 | .size = 0x680000, |
| 89 | } |
| 90 | }; |
| 91 | #endif /* CONFIG_MTD_PARTITIONS */ |
| 92 | |
| 93 | static struct physmap_flash_data argus_atp52b_flash_data = { |
| 94 | #ifdef CONFIG_MTD_PARTITIONS |
| 95 | .nr_parts = ARRAY_SIZE(argus_atp52b_partitions), |
| 96 | .parts = argus_atp52b_partitions, |
| 97 | #endif |
| 98 | }; |
| 99 | |
| 100 | static void __init argus_atp52b_init(void) |
| 101 | { |
| 102 | rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); |
| 103 | rt305x_register_flash(0, &argus_atp52b_flash_data); |
| 104 | ramips_register_gpio_leds(-1, ARRAY_SIZE(argus_atp52b_leds_gpio), |
| 105 | argus_atp52b_leds_gpio); |
| 106 | ramips_register_gpio_buttons(-1, ARGUS_ATP52B_BUTTONS_POLL_INTERVAL, |
| 107 | ARRAY_SIZE(argus_atp52b_gpio_buttons), |
| 108 | argus_atp52b_gpio_buttons); |
| 109 | rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; |
| 110 | rt305x_register_ethernet(); |
| 111 | rt305x_register_wifi(); |
| 112 | rt305x_register_wdt(); |
| 113 | rt305x_register_usb(); |
| 114 | } |
| 115 | |
| 116 | MIPS_MACHINE(RAMIPS_MACH_ARGUS_ATP52B, "ARGUS_ATP52B", "Argus ATP-52B", |
| 117 | argus_atp52b_init); |
| 118 | |
