Root/package/kernel/modules/block.mk

1#
2# Copyright (C) 2006-2010 OpenWrt.org
3#
4# This is free software, licensed under the GNU General Public License v2.
5# See /LICENSE for more information.
6#
7
8BLOCK_MENU:=Block Devices
9
10define KernelPackage/aoe
11  SUBMENU:=$(BLOCK_MENU)
12  TITLE:=ATA over Ethernet support
13  KCONFIG:=CONFIG_ATA_OVER_ETH
14  FILES:=$(LINUX_DIR)/drivers/block/aoe/aoe.ko
15  AUTOLOAD:=$(call AutoLoad,30,aoe)
16endef
17
18define KernelPackage/aoe/description
19  Kernel support for ATA over Ethernet
20endef
21
22$(eval $(call KernelPackage,aoe))
23
24
25define KernelPackage/ata-core
26  SUBMENU:=$(BLOCK_MENU)
27  TITLE:=Serial and Parallel ATA support
28  DEPENDS:=@PCI_SUPPORT +kmod-scsi-core @(!TARGET_ubicom32||!TARGET_etrax)
29  KCONFIG:=CONFIG_ATA
30  FILES:=$(LINUX_DIR)/drivers/ata/libata.ko
31  AUTOLOAD:=$(call AutoLoad,21,libata,1)
32endef
33
34$(eval $(call KernelPackage,ata-core))
35
36
37define AddDepends/ata
38  SUBMENU:=$(BLOCK_MENU)
39  DEPENDS+=kmod-ata-core $(1)
40endef
41
42
43define KernelPackage/ata-ahci
44  TITLE:=AHCI Serial ATA support
45  KCONFIG:=CONFIG_SATA_AHCI
46  FILES:=$(LINUX_DIR)/drivers/ata/ahci.ko
47  ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,2.6.35)),1)
48    FILES += $(LINUX_DIR)/drivers/ata/libahci.ko
49    AUTOLOAD:=$(call AutoLoad,41,libahci ahci,1)
50  else
51    AUTOLOAD:=$(call AutoLoad,41,ahci,1)
52  endif
53  $(call AddDepends/ata)
54endef
55
56define KernelPackage/ata-ahci/description
57 Support for AHCI Serial ATA controllers.
58endef
59
60$(eval $(call KernelPackage,ata-ahci))
61
62
63define KernelPackage/ata-artop
64  TITLE:=ARTOP 6210/6260 PATA support
65  KCONFIG:=CONFIG_PATA_ARTOP
66  FILES:=$(LINUX_DIR)/drivers/ata/pata_artop.ko
67  AUTOLOAD:=$(call AutoLoad,41,pata_artop,1)
68  $(call AddDepends/ata)
69endef
70
71define KernelPackage/ata-artop/description
72 PATA support for ARTOP 6210/6260 host controllers.
73endef
74
75$(eval $(call KernelPackage,ata-artop))
76
77
78define KernelPackage/ata-marvell-sata
79  TITLE:=Marvell Serial ATA support
80  KCONFIG:=CONFIG_SATA_MV
81  FILES:=$(LINUX_DIR)/drivers/ata/sata_mv.ko
82  AUTOLOAD:=$(call AutoLoad,41,sata_mv,1)
83  $(call AddDepends/ata)
84endef
85
86define KernelPackage/ata-marvell-sata/description
87 SATA support for marvell chipsets
88endef
89
90$(eval $(call KernelPackage,ata-marvell-sata))
91
92
93define KernelPackage/ata-nvidia-sata
94  TITLE:=Nvidia Serial ATA support
95  KCONFIG:=CONFIG_SATA_NV
96  FILES:=$(LINUX_DIR)/drivers/ata/sata_nv.ko
97  AUTOLOAD:=$(call AutoLoad,41,sata_nv,1)
98  $(call AddDepends/ata)
99endef
100
101$(eval $(call KernelPackage,ata-nvidia-sata))
102
103
104define KernelPackage/ata-pdc202xx-old
105  SUBMENU:=$(BLOCK_MENU)
106  TITLE:=Older Promise PATA controller support
107  DEPENDS:=kmod-ata-core
108  KCONFIG:= \
109       CONFIG_ATA_SFF=y \
110       CONFIG_PATA_PDC_OLD
111  FILES:=$(LINUX_DIR)/drivers/ata/pata_pdc202xx_old.ko
112  AUTOLOAD:=$(call AutoLoad,41,pata_pdc202xx_old,1)
113endef
114
115define KernelPackage/ata-pdc202xx-old/description
116 This option enables support for the Promise 20246, 20262, 20263,
117 20265 and 20267 adapters.
118endef
119
120$(eval $(call KernelPackage,ata-pdc202xx-old))
121
122
123define KernelPackage/ata-piix
124  TITLE:=Intel PIIX PATA/SATA support
125  KCONFIG:=CONFIG_ATA_PIIX
126  FILES:=$(LINUX_DIR)/drivers/ata/ata_piix.ko
127  AUTOLOAD:=$(call AutoLoad,41,ata_piix,1)
128  $(call AddDepends/ata)
129endef
130
131define KernelPackage/ata-piix/description
132 SATA support for Intel ICH5/6/7/8 series host controllers and
133 PATA support for Intel ESB/ICH/PIIX3/PIIX4 series host controllers.
134endef
135
136$(eval $(call KernelPackage,ata-piix))
137
138
139define KernelPackage/ata-sil
140  TITLE:=Silicon Image SATA support
141  KCONFIG:=CONFIG_SATA_SIL
142  FILES:=$(LINUX_DIR)/drivers/ata/sata_sil.ko
143  AUTOLOAD:=$(call AutoLoad,41,sata_sil,1)
144  $(call AddDepends/ata)
145endef
146
147define KernelPackage/ata-sil/description
148 Support for Silicon Image Serial ATA controllers.
149endef
150
151$(eval $(call KernelPackage,ata-sil))
152
153
154define KernelPackage/ata-sil24
155  TITLE:=Silicon Image 3124/3132 SATA support
156  KCONFIG:=CONFIG_SATA_SIL24
157  FILES:=$(LINUX_DIR)/drivers/ata/sata_sil24.ko
158  AUTOLOAD:=$(call AutoLoad,41,sata_sil24,1)
159  $(call AddDepends/ata)
160endef
161
162define KernelPackage/ata-sil24/description
163 Support for Silicon Image 3124/3132 Serial ATA controllers.
164endef
165
166$(eval $(call KernelPackage,ata-sil24))
167
168
169define KernelPackage/ata-via-sata
170  TITLE:=VIA SATA support
171  KCONFIG:=CONFIG_SATA_VIA
172  FILES:=$(LINUX_DIR)/drivers/ata/sata_via.ko
173  AUTOLOAD:=$(call AutoLoad,41,sata_via,1)
174  $(call AddDepends/ata)
175endef
176
177define KernelPackage/ata-via-sata/description
178 This option enables support for VIA Serial ATA.
179endef
180
181$(eval $(call KernelPackage,ata-via-sata))
182
183
184define KernelPackage/block2mtd
185  SUBMENU:=$(BLOCK_MENU)
186  TITLE:=Block device MTD emulation
187  KCONFIG:=CONFIG_MTD_BLOCK2MTD
188  FILES:=$(LINUX_DIR)/drivers/mtd/devices/block2mtd.ko
189endef
190
191$(eval $(call KernelPackage,block2mtd))
192
193
194define KernelPackage/dm
195  SUBMENU:=$(BLOCK_MENU)
196  TITLE:=Device Mapper
197  # All the "=n" are unnecessary, they're only there
198  # to stop the config from asking the question.
199  # MIRROR is M because I've needed it for pvmove.
200  KCONFIG:= \
201    CONFIG_BLK_DEV_MD=n \
202    CONFIG_DM_DEBUG=n \
203    CONFIG_DM_UEVENT=n \
204    CONFIG_DM_DELAY=n \
205    CONFIG_DM_MULTIPATH=n \
206    CONFIG_DM_ZERO=n \
207    CONFIG_DM_SNAPSHOT=n \
208    CONFIG_DM_LOG_USERSPACE=n \
209    CONFIG_MD=y \
210    CONFIG_BLK_DEV_DM \
211    CONFIG_DM_CRYPT \
212    CONFIG_DM_MIRROR
213  FILES:=$(LINUX_DIR)/drivers/md/dm-*.ko
214  AUTOLOAD:=$(call AutoLoad,30,dm-mod dm-log dm-region-hash dm-mirror dm-crypt)
215endef
216
217define KernelPackage/dm/description
218 Kernel module necessary for LVM2 support
219endef
220
221$(eval $(call KernelPackage,dm))
222
223
224define KernelPackage/md-mod
225  SUBMENU:=$(BLOCK_MENU)
226  TITLE:=MD RAID
227  KCONFIG:= \
228       CONFIG_MD=y \
229       CONFIG_BLK_DEV_MD=m \
230       CONFIG_MD_AUTODETECT=y \
231       CONFIG_MD_FAULTY=n
232  FILES:=$(LINUX_DIR)/drivers/md/md-mod.ko
233  AUTOLOAD:=$(call AutoLoad,27,md-mod)
234endef
235
236define KernelPackage/md-mod/description
237 Kernel RAID md module (md-mod.ko).
238 You will need to select at least one RAID level module below.
239endef
240
241$(eval $(call KernelPackage,md-mod))
242
243
244define KernelPackage/md/Depends
245  SUBMENU:=$(BLOCK_MENU)
246  DEPENDS:=kmod-md-mod $(1)
247endef
248
249
250define KernelPackage/md-linear
251$(call KernelPackage/md/Depends,)
252  TITLE:=RAID Linear Module
253  KCONFIG:=CONFIG_MD_LINEAR
254  FILES:=$(LINUX_DIR)/drivers/md/linear.ko
255  AUTOLOAD:=$(call AutoLoad,28,linear)
256endef
257
258define KernelPackage/md-linear/description
259 RAID "Linear" or "Append" driver module (linear.ko)
260endef
261
262$(eval $(call KernelPackage,md-linear))
263
264
265define KernelPackage/md-raid0
266$(call KernelPackage/md/Depends,)
267  TITLE:=RAID0 Module
268  KCONFIG:=CONFIG_MD_RAID0
269  FILES:=$(LINUX_DIR)/drivers/md/raid0.ko
270  AUTOLOAD:=$(call AutoLoad,28,raid0)
271endef
272
273define KernelPackage/md-raid0/description
274 RAID Level 0 (Striping) driver module (raid0.ko)
275endef
276
277$(eval $(call KernelPackage,md-raid0))
278
279
280define KernelPackage/md-raid1
281$(call KernelPackage/md/Depends,)
282  TITLE:=RAID1 Module
283  KCONFIG:=CONFIG_MD_RAID1
284  FILES:=$(LINUX_DIR)/drivers/md/raid1.ko
285  AUTOLOAD:=$(call AutoLoad,28,raid1)
286endef
287
288define KernelPackage/md-raid1/description
289 RAID Level 1 (Mirroring) driver (raid1.ko)
290endef
291
292$(eval $(call KernelPackage,md-raid1))
293
294
295define KernelPackage/md-raid10
296$(call KernelPackage/md/Depends,)
297  TITLE:=RAID10 Module
298  KCONFIG:=CONFIG_MD_RAID10
299  FILES:=$(LINUX_DIR)/drivers/md/raid10.ko
300  AUTOLOAD:=$(call AutoLoad,28,raid10)
301endef
302
303define KernelPackage/md-raid10/description
304 RAID Level 10 (Mirroring+Striping) driver module (raid10.ko)
305endef
306
307$(eval $(call KernelPackage,md-raid10))
308
309
310define KernelPackage/md-raid456
311$(call KernelPackage/md/Depends,)
312  TITLE:=RAID Level 456 Driver
313  KCONFIG:= \
314       CONFIG_XOR_BLOCKS \
315       CONFIG_ASYNC_CORE \
316       CONFIG_ASYNC_MEMCPY \
317       CONFIG_ASYNC_XOR \
318       CONFIG_ASYNC_PQ \
319       CONFIG_ASYNC_RAID6_RECOV \
320       CONFIG_ASYNC_RAID6_TEST=n \
321       CONFIG_MD_RAID6_PQ \
322       CONFIG_MD_RAID456 \
323       CONFIG_MULTICORE_RAID456=n
324  FILES:= \
325    $(LINUX_DIR)/crypto/xor.ko \
326    $(LINUX_DIR)/crypto/async_tx/async_tx.ko \
327    $(LINUX_DIR)/crypto/async_tx/async_memcpy.ko \
328    $(LINUX_DIR)/crypto/async_tx/async_xor.ko \
329    $(LINUX_DIR)/crypto/async_tx/async_pq.ko \
330    $(LINUX_DIR)/crypto/async_tx/async_raid6_recov.ko \
331    $(LINUX_DIR)/drivers/md/raid456.ko
332  # Additional files with kernel-dependent locations or presence
333  # For Linux >= 2.6.36
334  ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,2.6.36)), 1)
335    FILES+= \
336    $(LINUX_DIR)/lib/raid6/raid6_pq.ko
337  # For Linux < 2.6.36
338  else
339    FILES+= \
340    $(LINUX_DIR)/drivers/md/raid6_pq.ko
341  endif
342  AUTOLOAD:=$(call AutoLoad,28, xor async_tx async_memcpy async_xor raid6_pq async_pq async_raid6_recov raid456)
343endef
344
345define KernelPackage/md-raid456/description
346 RAID Level 4,5,6 kernel module (raid456.ko)
347
348 Includes the following modules required by
349 raid456.ko:
350    xor.ko
351    async_tx.ko
352    async_xor.ko
353    async_memcpy.ko
354    async_pq.ko
355    async_raid5_recov.ko
356    raid6_pq.ko
357endef
358
359$(eval $(call KernelPackage,md-raid456))
360
361
362define KernelPackage/md-multipath
363$(call KernelPackage/md/Depends,)
364  TITLE:=MD Multipath Module
365  KCONFIG:=CONFIG_MD_MULTIPATH
366  FILES:=$(LINUX_DIR)/drivers/md/multipath.ko
367  AUTOLOAD:=$(call AutoLoad,29,multipath)
368endef
369
370define KernelPackage/md-multipath/description
371 Multipath driver module (multipath.ko)
372endef
373
374$(eval $(call KernelPackage,md-multipath))
375
376
377define KernelPackage/ide-core
378  SUBMENU:=$(BLOCK_MENU)
379  TITLE:=IDE (ATA/ATAPI) device support
380  DEPENDS:=@PCI_SUPPORT
381  KCONFIG:= \
382    CONFIG_IDE \
383    CONFIG_BLK_DEV_IDE \
384    CONFIG_BLK_DEV_IDEDISK \
385    CONFIG_IDE_GD \
386    CONFIG_IDE_GD_ATA=y \
387    CONFIG_IDE_GD_ATAPI=n \
388    CONFIG_IDEPCI_PCIBUS_ORDER=y \
389    CONFIG_BLK_DEV_IDEDMA_PCI=y \
390    CONFIG_BLK_DEV_IDEPCI=y
391  FILES:= \
392    $(LINUX_DIR)/drivers/ide/ide-core.ko \
393    $(LINUX_DIR)/drivers/ide/ide-gd_mod.ko
394  AUTOLOAD:= \
395    $(call AutoLoad,20,ide-core,1) \
396    $(call AutoLoad,40,ide-gd_mod,1)
397endef
398
399define KernelPackage/ide-core/description
400 Kernel support for IDE, useful for usb mass storage devices (e.g. on WL-HDD)
401 Includes:
402 - ide-core
403 - ide-gd_mod
404endef
405
406$(eval $(call KernelPackage,ide-core))
407
408
409define AddDepends/ide
410  SUBMENU:=$(BLOCK_MENU)
411  DEPENDS+=kmod-ide-core $(1)
412endef
413
414
415define KernelPackage/ide-generic
416  SUBMENU:=$(BLOCK_MENU)
417  DEPENDS:=@PCI_SUPPORT
418  TITLE:=Kernel support for generic PCI IDE chipsets
419  KCONFIG:=CONFIG_BLK_DEV_GENERIC
420  FILES:=$(LINUX_DIR)/drivers/ide/ide-pci-generic.ko
421  AUTOLOAD:=$(call AutoLoad,30,ide-pci-generic,1)
422  $(call AddDepends/ide)
423endef
424
425$(eval $(call KernelPackage,ide-generic))
426
427
428define KernelPackage/ide-generic-old
429  SUBMENU:=$(BLOCK_MENU)
430  TITLE:=Kernel support for generic (legacy) IDE chipsets
431  KCONFIG:=CONFIG_IDE_GENERIC
432  FILES:=$(LINUX_DIR)/drivers/ide/ide-generic.ko
433  AUTOLOAD:=$(call AutoLoad,30,ide-generic,1)
434  $(call AddDepends/ide)
435endef
436
437$(eval $(call KernelPackage,ide-generic-old))
438
439
440define KernelPackage/ide-aec62xx
441  TITLE:=Acard AEC62xx IDE driver
442  DEPENDS:=@PCI_SUPPORT
443  KCONFIG:=CONFIG_BLK_DEV_AEC62XX
444  FILES:=$(LINUX_DIR)/drivers/ide/aec62xx.ko
445  AUTOLOAD:=$(call AutoLoad,30,aec62xx,1)
446  $(call AddDepends/ide)
447endef
448
449define KernelPackage/ide-aec62xx/description
450 Support for Acard AEC62xx (Artop ATP8xx) IDE controllers.
451endef
452
453$(eval $(call KernelPackage,ide-aec62xx,1))
454
455
456define KernelPackage/ide-pdc202xx
457  TITLE:=Promise PDC202xx IDE driver
458  DEPENDS:=@PCI_SUPPORT
459  KCONFIG:=CONFIG_BLK_DEV_PDC202XX_OLD
460  FILES:=$(LINUX_DIR)/drivers/ide/pdc202xx_old.ko
461  AUTOLOAD:=$(call AutoLoad,30,pdc202xx_old,1)
462  $(call AddDepends/ide)
463endef
464
465define KernelPackage/ide-pdc202xx/description
466 Support for the Promise Ultra 33/66/100 (PDC202{46|62|65|67|68}) IDE
467 controllers.
468endef
469
470$(eval $(call KernelPackage,ide-pdc202xx))
471
472
473define KernelPackage/ide-it821x
474  TITLE:=ITE IT821x IDE driver
475  DEPENDS:=@PCI_SUPPORT
476  KCONFIG:=CONFIG_BLK_DEV_IT821X
477  FILES=$(LINUX_DIR)/drivers/ide/it821x.ko
478  AUTOLOAD:=$(call AutoLoad,30,it821x,1)
479  $(call AddDepends/ide)
480endef
481
482define KernelPackage/ide-it821x/description
483  Kernel module for the ITE IDE821x IDE controllers.
484endef
485
486$(eval $(call KernelPackage,ide-it821x))
487
488
489define KernelPackage/cs5535
490  TITLE:=NSC/AMD CS5535 chipset support
491  DEPENDS:=@TARGET_x86
492  KCONFIG:=CONFIG_BLK_DEV_CS5535
493  FILES=$(LINUX_DIR)/drivers/ide/cs5535.ko
494  AUTOLOAD:=$(call AutoLoad,30,cs5535,1)
495  $(call AddDepends/ide)
496endef
497
498define KernelPackage/cs5535/description
499  Kernel module for the NSC/AMD CS5535 companion chip
500endef
501
502$(eval $(call KernelPackage,cs5535))
503
504
505define KernelPackage/cs5536
506  TITLE:=AMD CS5536 chipset support
507  DEPENDS:=@TARGET_x86
508  KCONFIG:=CONFIG_BLK_DEV_CS5536
509  FILES=$(LINUX_DIR)/drivers/ide/cs5536.ko
510  AUTOLOAD:=$(call AutoLoad,30,cs5536,1)
511  $(call AddDepends/ide)
512endef
513
514define KernelPackage/cs5536/description
515  Kernel module for the AMD CS5536 Geode LX companion chip
516endef
517
518$(eval $(call KernelPackage,cs5536))
519
520
521define KernelPackage/pata-cs5535
522  TITLE:=CS5535 PATA support
523  DEPENDS:=@TARGET_x86 @PCI_SUPPORT
524  KCONFIG:=CONFIG_PATA_CS5535
525  FILES=$(LINUX_DIR)/drivers/ata/pata_cs5535.ko
526  AUTOLOAD:=$(call AutoLoad,30,pata_cs5535,1)
527  $(call AddDepends/ata)
528endef
529
530define KernelPackage/pata-cs5535/description
531  Kernel module for the NSC/AMD CS5535 companion chip
532endef
533
534$(eval $(call KernelPackage,pata-cs5535))
535
536
537define KernelPackage/pata-cs5536
538  TITLE:=CS5536 PATA support
539  DEPENDS:=@TARGET_x86 @PCI_SUPPORT
540  KCONFIG:=CONFIG_PATA_CS5536
541  FILES=$(LINUX_DIR)/drivers/ata/pata_cs5536.ko
542  AUTOLOAD:=$(call AutoLoad,30,pata_cs5536,1)
543  $(call AddDepends/ata)
544endef
545
546define KernelPackage/pata-cs5536/description
547  Kernel module for the AMD CS5536 Geode LX companion chip
548endef
549
550$(eval $(call KernelPackage,pata-cs5536))
551
552
553define KernelPackage/libsas
554  SUBMENU:=$(BLOCK_MENU)
555  TITLE:=SAS Domain Transport Attributes
556  DEPENDS:=@TARGET_x86
557  KCONFIG:=CONFIG_SCSI_SAS_LIBSAS \
558    CONFIG_SCSI_SAS_ATTRS \
559    CONFIG_SCSI_SAS_ATA=y \
560    CONFIG_SCSI_SAS_HOST_SMP=y \
561    CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
562  FILES:= \
563    $(LINUX_DIR)/drivers/scsi/scsi_transport_sas.ko \
564    $(LINUX_DIR)/drivers/scsi/libsas/libsas.ko
565  AUTOLOAD:=$(call AutoLoad,29,scsi_transport_sas libsas,1)
566endef
567
568define KernelPackage/libsas/description
569  SAS Domain Transport Attributes support.
570endef
571
572$(eval $(call KernelPackage,libsas,1))
573
574
575define KernelPackage/loop
576  SUBMENU:=$(BLOCK_MENU)
577  TITLE:=Loopback device support
578  KCONFIG:= \
579    CONFIG_BLK_DEV_LOOP \
580    CONFIG_BLK_DEV_CRYPTOLOOP=n
581  FILES:=$(LINUX_DIR)/drivers/block/loop.ko
582  AUTOLOAD:=$(call AutoLoad,30,loop)
583endef
584
585define KernelPackage/loop/description
586 Kernel module for loopback device support
587endef
588
589$(eval $(call KernelPackage,loop))
590
591
592define KernelPackage/mvsas
593  SUBMENU:=$(BLOCK_MENU)
594  TITLE:=Marvell 88SE6440 SAS/SATA driver
595  DEPENDS:=@TARGET_x86 +kmod-libsas
596  KCONFIG:=CONFIG_SCSI_MVSAS
597  ifneq ($(CONFIG_LINUX_2_6_30),)
598    FILES:=$(LINUX_DIR)/drivers/scsi/mvsas.ko
599  else
600    FILES:=$(LINUX_DIR)/drivers/scsi/mvsas/mvsas.ko
601  endif
602  AUTOLOAD:=$(call AutoLoad,40,mvsas,1)
603endef
604
605define KernelPackage/mvsas/description
606  Kernel support for the Marvell SAS SCSI adapters
607endef
608
609$(eval $(call KernelPackage,mvsas))
610
611
612define KernelPackage/nbd
613  SUBMENU:=$(BLOCK_MENU)
614  TITLE:=Network block device support
615  KCONFIG:=CONFIG_BLK_DEV_NBD
616  FILES:=$(LINUX_DIR)/drivers/block/nbd.ko
617  AUTOLOAD:=$(call AutoLoad,30,nbd)
618endef
619
620define KernelPackage/nbd/description
621 Kernel module for network block device support
622endef
623
624$(eval $(call KernelPackage,nbd))
625
626
627define KernelPackage/scsi-core
628  SUBMENU:=$(BLOCK_MENU)
629  TITLE:=SCSI device support
630  KCONFIG:= \
631    CONFIG_SCSI \
632    CONFIG_BLK_DEV_SD
633  FILES:= \
634    $(if $(findstring y,$(CONFIG_SCSI)),,$(LINUX_DIR)/drivers/scsi/scsi_mod.ko) \
635    $(LINUX_DIR)/drivers/scsi/sd_mod.ko
636  AUTOLOAD:=$(call AutoLoad,20,scsi_mod,1) $(call AutoLoad,40,sd_mod,1)
637endef
638
639$(eval $(call KernelPackage,scsi-core))
640
641
642define KernelPackage/scsi-generic
643  SUBMENU:=$(BLOCK_MENU)
644  TITLE:=Kernel support for SCSI generic
645  DEPENDS:=+kmod-scsi-core
646  KCONFIG:= \
647    CONFIG_CHR_DEV_SG
648  FILES:= \
649    $(LINUX_DIR)/drivers/scsi/sg.ko
650  AUTOLOAD:=$(call AutoLoad,65,sg)
651endef
652
653$(eval $(call KernelPackage,scsi-generic))
654
655
656define KernelPackage/scsi-cdrom
657  SUBMENU:=$(BLOCK_MENU)
658  TITLE:=Kernel support for CD / DVD drives
659  DEPENDS:=+kmod-scsi-core
660  KCONFIG:= \
661    CONFIG_BLK_DEV_SR \
662    CONFIG_BLK_DEV_SR_VENDOR=n
663  FILES:= \
664    $(LINUX_DIR)/drivers/cdrom/cdrom.ko \
665    $(LINUX_DIR)/drivers/scsi/sr_mod.ko
666  AUTOLOAD:=$(call AutoLoad,30,cdrom) $(call AutoLoad,45,sr_mod)
667endef
668
669$(eval $(call KernelPackage,scsi-cdrom))
670
671

Archive Download this file

Branches:
backfire
history
master
release_2010-11-17
release_2010-12-14
release_2011-02-23
release_2011-05-28
release_2011-08-27
release_2011-11-13
release_2012-03-18
release_2012-04-09
release_2012-10-11
uclibc_nptl



interactive