| 1 | /* |
| 2 | * Memory sub-system initialization code for Danube board. |
| 3 | * Andre Messerschmidt |
| 4 | * Copyright (c) 2005 Infineon Technologies AG |
| 5 | * |
| 6 | * Based on Inca-IP code |
| 7 | * Copyright (c) 2003 Wolfgang Denk <wd@denx.de> |
| 8 | * |
| 9 | * See file CREDITS for list of people who contributed to this |
| 10 | * project. |
| 11 | * |
| 12 | * This program is free software; you can redistribute it and/or |
| 13 | * modify it under the terms of the GNU General Public License as |
| 14 | * published by the Free Software Foundation; either version 2 of |
| 15 | * the License, or (at your option) any later version. |
| 16 | * |
| 17 | * This program is distributed in the hope that it will be useful, |
| 18 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 19 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 20 | * GNU General Public License for more details. |
| 21 | * |
| 22 | * You should have received a copy of the GNU General Public License |
| 23 | * along with this program; if not, write to the Free Software |
| 24 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| 25 | * MA 02111-1307 USA |
| 26 | */ |
| 27 | /* History: |
| 28 | peng liu May 25, 2006, for PLL setting after reset, 05252006 |
| 29 | */ |
| 30 | #include <config.h> |
| 31 | #include <version.h> |
| 32 | #include <asm/regdef.h> |
| 33 | |
| 34 | #if defined(CONFIG_USE_DDR_RAM) |
| 35 | |
| 36 | #if defined(CONFIG_CPU_111M_RAM_111M) || defined(CONFIG_CPU_333M_RAM_111M) |
| 37 | # include "ar9_ddr111_settings.h" |
| 38 | #elif defined(CONFIG_CPU_166M_RAM_166M) || defined(CONFIG_CPU_333M_RAM_166M) || defined(CONFIG_CPU_500M_RAM_166M) |
| 39 | # include "ar9_ddr166_settings.h" |
| 40 | #elif defined(CONFIG_CPU_442M_RAM_147M) |
| 41 | # include "ar9_ddr166_settings.h" |
| 42 | #elif defined(CONFIG_CPU_393M_RAM_196M) |
| 43 | # ifdef CONFIG_ETRON_RAM |
| 44 | # include "etron_ddr196_settings.h" |
| 45 | # else |
| 46 | # include "ar9_ddr196_settings.h" |
| 47 | # endif |
| 48 | #elif defined(CONFIG_CPU_442M_RAM_221M) |
| 49 | # include "ar9_ddr221_settings.h" |
| 50 | #elif defined(CONFIG_CPU_500M_RAM_250M) |
| 51 | # include "ar9_ddr250_settings.h" |
| 52 | #else |
| 53 | # warning "missing definition for ddr_settings.h, use default!" |
| 54 | # include "ar9_ddr_settings.h" |
| 55 | #endif |
| 56 | #endif /* CONFIG_USE_DDR_RAM */ |
| 57 | |
| 58 | #define EBU_MODUL_BASE 0xBE105300 |
| 59 | #define EBU_CLC(value) 0x0000(value) |
| 60 | #define EBU_CON(value) 0x0010(value) |
| 61 | #define EBU_ADDSEL0(value) 0x0020(value) |
| 62 | #define EBU_ADDSEL1(value) 0x0024(value) |
| 63 | #define EBU_ADDSEL2(value) 0x0028(value) |
| 64 | #define EBU_ADDSEL3(value) 0x002C(value) |
| 65 | #define EBU_BUSCON0(value) 0x0060(value) |
| 66 | #define EBU_BUSCON1(value) 0x0064(value) |
| 67 | #define EBU_BUSCON2(value) 0x0068(value) |
| 68 | #define EBU_BUSCON3(value) 0x006C(value) |
| 69 | |
| 70 | #define MC_MODUL_BASE 0xBF800000 |
| 71 | #define MC_ERRCAUSE(value) 0x0010(value) |
| 72 | #define MC_ERRADDR(value) 0x0020(value) |
| 73 | #define MC_CON(value) 0x0060(value) |
| 74 | |
| 75 | #define MC_SRAM_ENABLE 0x00000004 |
| 76 | #define MC_SDRAM_ENABLE 0x00000002 |
| 77 | #define MC_DDRRAM_ENABLE 0x00000001 |
| 78 | |
| 79 | #define MC_SDR_MODUL_BASE 0xBF800200 |
| 80 | #define MC_IOGP(value) 0x0000(value) |
| 81 | #define MC_CTRLENA(value) 0x0010(value) |
| 82 | #define MC_MRSCODE(value) 0x0020(value) |
| 83 | #define MC_CFGDW(value) 0x0030(value) |
| 84 | #define MC_CFGPB0(value) 0x0040(value) |
| 85 | #define MC_LATENCY(value) 0x0080(value) |
| 86 | #define MC_TREFRESH(value) 0x0090(value) |
| 87 | #define MC_SELFRFSH(value) 0x00A0(value) |
| 88 | |
| 89 | #define MC_DDR_MODUL_BASE 0xBF801000 |
| 90 | #define MC_DC00(value) 0x0000(value) |
| 91 | #define MC_DC01(value) 0x0010(value) |
| 92 | #define MC_DC02(value) 0x0020(value) |
| 93 | #define MC_DC03(value) 0x0030(value) |
| 94 | #define MC_DC04(value) 0x0040(value) |
| 95 | #define MC_DC05(value) 0x0050(value) |
| 96 | #define MC_DC06(value) 0x0060(value) |
| 97 | #define MC_DC07(value) 0x0070(value) |
| 98 | #define MC_DC08(value) 0x0080(value) |
| 99 | #define MC_DC09(value) 0x0090(value) |
| 100 | #define MC_DC10(value) 0x00A0(value) |
| 101 | #define MC_DC11(value) 0x00B0(value) |
| 102 | #define MC_DC12(value) 0x00C0(value) |
| 103 | #define MC_DC13(value) 0x00D0(value) |
| 104 | #define MC_DC14(value) 0x00E0(value) |
| 105 | #define MC_DC15(value) 0x00F0(value) |
| 106 | #define MC_DC16(value) 0x0100(value) |
| 107 | #define MC_DC17(value) 0x0110(value) |
| 108 | #define MC_DC18(value) 0x0120(value) |
| 109 | #define MC_DC19(value) 0x0130(value) |
| 110 | #define MC_DC20(value) 0x0140(value) |
| 111 | #define MC_DC21(value) 0x0150(value) |
| 112 | #define MC_DC22(value) 0x0160(value) |
| 113 | #define MC_DC23(value) 0x0170(value) |
| 114 | #define MC_DC24(value) 0x0180(value) |
| 115 | #define MC_DC25(value) 0x0190(value) |
| 116 | #define MC_DC26(value) 0x01A0(value) |
| 117 | #define MC_DC27(value) 0x01B0(value) |
| 118 | #define MC_DC28(value) 0x01C0(value) |
| 119 | #define MC_DC29(value) 0x01D0(value) |
| 120 | #define MC_DC30(value) 0x01E0(value) |
| 121 | #define MC_DC31(value) 0x01F0(value) |
| 122 | #define MC_DC32(value) 0x0200(value) |
| 123 | #define MC_DC33(value) 0x0210(value) |
| 124 | #define MC_DC34(value) 0x0220(value) |
| 125 | #define MC_DC35(value) 0x0230(value) |
| 126 | #define MC_DC36(value) 0x0240(value) |
| 127 | #define MC_DC37(value) 0x0250(value) |
| 128 | #define MC_DC38(value) 0x0260(value) |
| 129 | #define MC_DC39(value) 0x0270(value) |
| 130 | #define MC_DC40(value) 0x0280(value) |
| 131 | #define MC_DC41(value) 0x0290(value) |
| 132 | #define MC_DC42(value) 0x02A0(value) |
| 133 | #define MC_DC43(value) 0x02B0(value) |
| 134 | #define MC_DC44(value) 0x02C0(value) |
| 135 | #define MC_DC45(value) 0x02D0(value) |
| 136 | #define MC_DC46(value) 0x02E0(value) |
| 137 | |
| 138 | #define RCU_OFFSET 0xBF203000 |
| 139 | #define RCU_RST_REQ (RCU_OFFSET + 0x0010) |
| 140 | #define RCU_STS (RCU_OFFSET + 0x0014) |
| 141 | |
| 142 | #define CGU_OFFSET 0xBF103000 |
| 143 | #define PLL0_CFG (CGU_OFFSET + 0x0004) |
| 144 | #define PLL1_CFG (CGU_OFFSET + 0x0008) |
| 145 | #define PLL2_CFG (CGU_OFFSET + 0x000C) |
| 146 | #define CGU_SYS (CGU_OFFSET + 0x0010) |
| 147 | #define CGU_UPDATE (CGU_OFFSET + 0x0014) |
| 148 | #define IF_CLK (CGU_OFFSET + 0x0018) |
| 149 | #define CGU_SMD (CGU_OFFSET + 0x0020) |
| 150 | #define CGU_CT1SR (CGU_OFFSET + 0x0028) |
| 151 | #define CGU_CT2SR (CGU_OFFSET + 0x002C) |
| 152 | #define CGU_PCMCR (CGU_OFFSET + 0x0030) |
| 153 | #define PCI_CR_PCI (CGU_OFFSET + 0x0034) |
| 154 | #define CGU_OSC_CTRL (CGU_OFFSET + 0x001C) |
| 155 | #define CGU_MIPS_PWR_DWN (CGU_OFFSET + 0x0038) |
| 156 | #define CLK_MEASURE (CGU_OFFSET + 0x003C) |
| 157 | |
| 158 | //05252006 |
| 159 | #define pll0_35MHz_CONFIG 0x9D861059 |
| 160 | #define pll1_35MHz_CONFIG 0x1A260CD9 |
| 161 | #define pll2_35MHz_CONFIG 0x8000f1e5 |
| 162 | #define pll0_36MHz_CONFIG 0x1000125D |
| 163 | #define pll1_36MHz_CONFIG 0x1B1E0C99 |
| 164 | #define pll2_36MHz_CONFIG 0x8002f2a1 |
| 165 | //05252006 |
| 166 | |
| 167 | //06063001-joelin disable the PCI CFRAME mask -start |
| 168 | /*CFRAME is an I/O signal, in the chip, the output CFRAME is selected via GPIO altsel pins, so if you select MII1 RXD1, the CFRAME will not come out. |
| 169 | But the CFRAME input still take the signal from the pad and not disabled when altsel choose other function. So when MII1_RXD1 is low from other device, the EBU interface will be disabled. |
| 170 | |
| 171 | The chip function in such a way that disable the CFRAME mask mean EBU not longer check CFRAME to be the device using the bus. |
| 172 | The side effect is the entire PCI block will see CFRAME low all the time meaning PCI cannot use the bus at all so no more PCI function. |
| 173 | */ |
| 174 | #define PCI_CR_PR_OFFSET 0xBE105400 |
| 175 | #define PCI_CR_PCI_MOD_REG (PCI_CR_PR_OFFSET + 0x0030) |
| 176 | #define PCI_CONFIG_SPACE 0xB7000000 |
| 177 | #define CS_CFM (PCI_CONFIG_SPACE + 0x6C) |
| 178 | //06063001-joelin disable the PCI CFRAME mask -end |
| 179 | .set noreorder |
| 180 | |
| 181 | |
| 182 | /* |
| 183 | * void ebu_init(void) |
| 184 | */ |
| 185 | .globl ebu_init |
| 186 | .ent ebu_init |
| 187 | ebu_init: |
| 188 | |
| 189 | #if defined(CONFIG_EBU_ADDSEL0) || defined(CONFIG_EBU_ADDSEL1) || \ |
| 190 | defined(CONFIG_EBU_ADDSEL2) || defined(CONFIG_EBU_ADDSEL3) || \ |
| 191 | defined(CONFIG_EBU_BUSCON0) || defined(CONFIG_EBU_BUSCON1) || \ |
| 192 | defined(CONFIG_EBU_BUSCON2) || defined(CONFIG_EBU_BUSCON3) |
| 193 | |
| 194 | li t1, EBU_MODUL_BASE |
| 195 | #if defined(CONFIG_EBU_ADDSEL0) |
| 196 | li t2, CONFIG_EBU_ADDSEL0 |
| 197 | sw t2, EBU_ADDSEL0(t1) |
| 198 | #endif |
| 199 | #if defined(CONFIG_EBU_ADDSEL1) |
| 200 | li t2, CONFIG_EBU_ADDSEL1 |
| 201 | sw t2, EBU_ADDSEL1(t1) |
| 202 | #endif |
| 203 | #if defined(CONFIG_EBU_ADDSEL2) |
| 204 | li t2, CONFIG_EBU_ADDSEL2 |
| 205 | sw t2, EBU_ADDSEL2(t1) |
| 206 | #endif |
| 207 | #if defined(CONFIG_EBU_ADDSEL3) |
| 208 | li t2, CONFIG_EBU_ADDSEL3 |
| 209 | sw t2, EBU_ADDSEL3(t1) |
| 210 | #endif |
| 211 | |
| 212 | #if defined(CONFIG_EBU_BUSCON0) |
| 213 | li t2, CONFIG_EBU_BUSCON0 |
| 214 | sw t2, EBU_BUSCON0(t1) |
| 215 | #endif |
| 216 | #if defined(CONFIG_EBU_BUSCON1) |
| 217 | li t2, CONFIG_EBU_BUSCON1 |
| 218 | sw t2, EBU_BUSCON1(t1) |
| 219 | #endif |
| 220 | #if defined(CONFIG_EBU_BUSCON2) |
| 221 | li t2, CONFIG_EBU_BUSCON2 |
| 222 | sw t2, EBU_BUSCON2(t1) |
| 223 | #endif |
| 224 | #if defined(CONFIG_EBU_BUSCON3) |
| 225 | li t2, CONFIG_EBU_BUSCON3 |
| 226 | sw t2, EBU_BUSCON3(t1) |
| 227 | #endif |
| 228 | |
| 229 | #endif |
| 230 | |
| 231 | j ra |
| 232 | nop |
| 233 | |
| 234 | .end ebu_init |
| 235 | |
| 236 | |
| 237 | /* |
| 238 | * void cgu_init(long) |
| 239 | * |
| 240 | * a0 has the clock value |
| 241 | */ |
| 242 | .globl cgu_init |
| 243 | .ent cgu_init |
| 244 | cgu_init: |
| 245 | li t2, CGU_SYS |
| 246 | lw t2,0(t2) |
| 247 | beq t2,a0,freq_up2date |
| 248 | nop |
| 249 | |
| 250 | li t2, RCU_STS |
| 251 | lw t2, 0(t2) |
| 252 | and t2,0x00020000 |
| 253 | beq t2,0x00020000,boot_36MHZ |
| 254 | nop |
| 255 | //05252006 |
| 256 | li t1, PLL0_CFG |
| 257 | li t2, pll0_35MHz_CONFIG |
| 258 | sw t2,0(t1) |
| 259 | li t1, PLL1_CFG |
| 260 | li t2, pll1_35MHz_CONFIG |
| 261 | sw t2,0(t1) |
| 262 | li t1, PLL2_CFG |
| 263 | li t2, pll2_35MHz_CONFIG |
| 264 | sw t2,0(t1) |
| 265 | li t1, CGU_SYS |
| 266 | sw a0,0(t1) |
| 267 | li t1, RCU_RST_REQ |
| 268 | li t2, 0x40000008 |
| 269 | sw t2,0(t1) |
| 270 | b wait_reset |
| 271 | nop |
| 272 | boot_36MHZ: |
| 273 | li t1, PLL0_CFG |
| 274 | li t2, pll0_36MHz_CONFIG |
| 275 | sw t2,0(t1) |
| 276 | li t1, PLL1_CFG |
| 277 | li t2, pll1_36MHz_CONFIG |
| 278 | sw t2,0(t1) |
| 279 | li t1, PLL2_CFG |
| 280 | li t2, pll2_36MHz_CONFIG |
| 281 | sw t2,0(t1) |
| 282 | li t1, CGU_SYS |
| 283 | sw a0,0(t1) |
| 284 | li t1, RCU_RST_REQ |
| 285 | li t2, 0x40000008 |
| 286 | sw t2,0(t1) |
| 287 | //05252006 |
| 288 | |
| 289 | wait_reset: |
| 290 | b wait_reset |
| 291 | nop |
| 292 | freq_up2date: |
| 293 | j ra |
| 294 | nop |
| 295 | |
| 296 | .end cgu_init |
| 297 | |
| 298 | #ifndef CONFIG_USE_DDR_RAM |
| 299 | /* |
| 300 | * void sdram_init(long) |
| 301 | * |
| 302 | * a0 has the clock value |
| 303 | */ |
| 304 | .globl sdram_init |
| 305 | .ent sdram_init |
| 306 | sdram_init: |
| 307 | |
| 308 | /* SDRAM Initialization |
| 309 | */ |
| 310 | li t1, MC_MODUL_BASE |
| 311 | |
| 312 | /* Clear Error log registers */ |
| 313 | sw zero, MC_ERRCAUSE(t1) |
| 314 | sw zero, MC_ERRADDR(t1) |
| 315 | |
| 316 | /* Enable SDRAM module in memory controller */ |
| 317 | li t3, MC_SDRAM_ENABLE |
| 318 | lw t2, MC_CON(t1) |
| 319 | or t3, t2, t3 |
| 320 | sw t3, MC_CON(t1) |
| 321 | |
| 322 | li t1, MC_SDR_MODUL_BASE |
| 323 | |
| 324 | /* disable the controller */ |
| 325 | li t2, 0 |
| 326 | sw t2, MC_CTRLENA(t1) |
| 327 | |
| 328 | li t2, 0x822 |
| 329 | sw t2, MC_IOGP(t1) |
| 330 | |
| 331 | li t2, 0x2 |
| 332 | sw t2, MC_CFGDW(t1) |
| 333 | |
| 334 | /* Set CAS Latency */ |
| 335 | li t2, 0x00000020 |
| 336 | sw t2, MC_MRSCODE(t1) |
| 337 | |
| 338 | /* Set CS0 to SDRAM parameters */ |
| 339 | li t2, 0x000014d8 |
| 340 | sw t2, MC_CFGPB0(t1) |
| 341 | |
| 342 | /* Set SDRAM latency parameters */ |
| 343 | li t2, 0x00036325; /* BC PC100 */ |
| 344 | sw t2, MC_LATENCY(t1) |
| 345 | |
| 346 | /* Set SDRAM refresh rate */ |
| 347 | li t2, 0x00000C30 |
| 348 | sw t2, MC_TREFRESH(t1) |
| 349 | |
| 350 | /* Clear Power-down registers */ |
| 351 | sw zero, MC_SELFRFSH(t1) |
| 352 | |
| 353 | /* Finally enable the controller */ |
| 354 | li t2, 1 |
| 355 | sw t2, MC_CTRLENA(t1) |
| 356 | |
| 357 | j ra |
| 358 | nop |
| 359 | |
| 360 | .end sdram_init |
| 361 | |
| 362 | #endif /* !CONFIG_USE_DDR_RAM */ |
| 363 | |
| 364 | #ifdef CONFIG_USE_DDR_RAM |
| 365 | /* |
| 366 | * void ddrram_init(long) |
| 367 | * |
| 368 | * a0 has the clock value |
| 369 | */ |
| 370 | .globl ddrram_init |
| 371 | .ent ddrram_init |
| 372 | ddrram_init: |
| 373 | |
| 374 | /* DDR-DRAM Initialization |
| 375 | */ |
| 376 | li t1, MC_MODUL_BASE |
| 377 | |
| 378 | /* Clear Error log registers */ |
| 379 | sw zero, MC_ERRCAUSE(t1) |
| 380 | sw zero, MC_ERRADDR(t1) |
| 381 | |
| 382 | /* Enable DDR module in memory controller */ |
| 383 | li t3, MC_DDRRAM_ENABLE |
| 384 | lw t2, MC_CON(t1) |
| 385 | or t3, t2, t3 |
| 386 | sw t3, MC_CON(t1) |
| 387 | |
| 388 | li t1, MC_DDR_MODUL_BASE |
| 389 | |
| 390 | /* Write configuration to DDR controller registers */ |
| 391 | li t2, MC_DC0_VALUE |
| 392 | sw t2, MC_DC00(t1) |
| 393 | |
| 394 | li t2, MC_DC1_VALUE |
| 395 | sw t2, MC_DC01(t1) |
| 396 | |
| 397 | li t2, MC_DC2_VALUE |
| 398 | sw t2, MC_DC02(t1) |
| 399 | |
| 400 | li t2, MC_DC3_VALUE |
| 401 | sw t2, MC_DC03(t1) |
| 402 | |
| 403 | li t2, MC_DC4_VALUE |
| 404 | sw t2, MC_DC04(t1) |
| 405 | |
| 406 | li t2, MC_DC5_VALUE |
| 407 | sw t2, MC_DC05(t1) |
| 408 | |
| 409 | li t2, MC_DC6_VALUE |
| 410 | sw t2, MC_DC06(t1) |
| 411 | |
| 412 | li t2, MC_DC7_VALUE |
| 413 | sw t2, MC_DC07(t1) |
| 414 | |
| 415 | li t2, MC_DC8_VALUE |
| 416 | sw t2, MC_DC08(t1) |
| 417 | |
| 418 | li t2, MC_DC9_VALUE |
| 419 | sw t2, MC_DC09(t1) |
| 420 | |
| 421 | li t2, MC_DC10_VALUE |
| 422 | sw t2, MC_DC10(t1) |
| 423 | |
| 424 | li t2, MC_DC11_VALUE |
| 425 | sw t2, MC_DC11(t1) |
| 426 | |
| 427 | li t2, MC_DC12_VALUE |
| 428 | sw t2, MC_DC12(t1) |
| 429 | |
| 430 | li t2, MC_DC13_VALUE |
| 431 | sw t2, MC_DC13(t1) |
| 432 | |
| 433 | li t2, MC_DC14_VALUE |
| 434 | sw t2, MC_DC14(t1) |
| 435 | |
| 436 | li t2, MC_DC15_VALUE |
| 437 | sw t2, MC_DC15(t1) |
| 438 | |
| 439 | li t2, MC_DC16_VALUE |
| 440 | sw t2, MC_DC16(t1) |
| 441 | |
| 442 | li t2, MC_DC17_VALUE |
| 443 | sw t2, MC_DC17(t1) |
| 444 | |
| 445 | li t2, MC_DC18_VALUE |
| 446 | sw t2, MC_DC18(t1) |
| 447 | |
| 448 | li t2, MC_DC19_VALUE |
| 449 | sw t2, MC_DC19(t1) |
| 450 | |
| 451 | li t2, MC_DC20_VALUE |
| 452 | sw t2, MC_DC20(t1) |
| 453 | |
| 454 | li t2, MC_DC21_VALUE |
| 455 | sw t2, MC_DC21(t1) |
| 456 | |
| 457 | li t2, MC_DC22_VALUE |
| 458 | sw t2, MC_DC22(t1) |
| 459 | |
| 460 | li t2, MC_DC23_VALUE |
| 461 | sw t2, MC_DC23(t1) |
| 462 | |
| 463 | li t2, MC_DC24_VALUE |
| 464 | sw t2, MC_DC24(t1) |
| 465 | |
| 466 | li t2, MC_DC25_VALUE |
| 467 | sw t2, MC_DC25(t1) |
| 468 | |
| 469 | li t2, MC_DC26_VALUE |
| 470 | sw t2, MC_DC26(t1) |
| 471 | |
| 472 | li t2, MC_DC27_VALUE |
| 473 | sw t2, MC_DC27(t1) |
| 474 | |
| 475 | li t2, MC_DC28_VALUE |
| 476 | sw t2, MC_DC28(t1) |
| 477 | |
| 478 | li t2, MC_DC29_VALUE |
| 479 | sw t2, MC_DC29(t1) |
| 480 | |
| 481 | li t2, MC_DC30_VALUE |
| 482 | sw t2, MC_DC30(t1) |
| 483 | |
| 484 | li t2, MC_DC31_VALUE |
| 485 | sw t2, MC_DC31(t1) |
| 486 | |
| 487 | li t2, MC_DC32_VALUE |
| 488 | sw t2, MC_DC32(t1) |
| 489 | |
| 490 | li t2, MC_DC33_VALUE |
| 491 | sw t2, MC_DC33(t1) |
| 492 | |
| 493 | li t2, MC_DC34_VALUE |
| 494 | sw t2, MC_DC34(t1) |
| 495 | |
| 496 | li t2, MC_DC35_VALUE |
| 497 | sw t2, MC_DC35(t1) |
| 498 | |
| 499 | li t2, MC_DC36_VALUE |
| 500 | sw t2, MC_DC36(t1) |
| 501 | |
| 502 | li t2, MC_DC37_VALUE |
| 503 | sw t2, MC_DC37(t1) |
| 504 | |
| 505 | li t2, MC_DC38_VALUE |
| 506 | sw t2, MC_DC38(t1) |
| 507 | |
| 508 | li t2, MC_DC39_VALUE |
| 509 | sw t2, MC_DC39(t1) |
| 510 | |
| 511 | li t2, MC_DC40_VALUE |
| 512 | sw t2, MC_DC40(t1) |
| 513 | |
| 514 | li t2, MC_DC41_VALUE |
| 515 | sw t2, MC_DC41(t1) |
| 516 | |
| 517 | li t2, MC_DC42_VALUE |
| 518 | sw t2, MC_DC42(t1) |
| 519 | |
| 520 | li t2, MC_DC43_VALUE |
| 521 | sw t2, MC_DC43(t1) |
| 522 | |
| 523 | li t2, MC_DC44_VALUE |
| 524 | sw t2, MC_DC44(t1) |
| 525 | |
| 526 | li t2, MC_DC45_VALUE |
| 527 | sw t2, MC_DC45(t1) |
| 528 | |
| 529 | li t2, MC_DC46_VALUE |
| 530 | sw t2, MC_DC46(t1) |
| 531 | |
| 532 | li t2, 0x00000100 |
| 533 | sw t2, MC_DC03(t1) |
| 534 | |
| 535 | j ra |
| 536 | nop |
| 537 | |
| 538 | .end ddrram_init |
| 539 | #endif /* CONFIG_USE_DDR_RAM */ |
| 540 | |
| 541 | .globl lowlevel_init |
| 542 | .ent lowlevel_init |
| 543 | lowlevel_init: |
| 544 | /* EBU, CGU and SDRAM/DDR-RAM Initialization. |
| 545 | */ |
| 546 | move t0, ra |
| 547 | /* We rely on the fact that non of the following ..._init() functions |
| 548 | * modify t0 |
| 549 | */ |
| 550 | #if defined(DDR166) |
| 551 | /* 0xe8 means CPU0/CPU1 333M, DDR 167M, FPI 83M, PPE 240M */ |
| 552 | li a0,0xe8 |
| 553 | #elif defined(DDR133) |
| 554 | /* 0xe9 means CPU0/CPU1 333M, DDR 133M, FPI 83M, PPE 240M */ |
| 555 | li a0,0xe9 |
| 556 | #else /* defined(DDR111) */ |
| 557 | /* 0xea means CPU0/CPU1 333M, DDR 111M, FPI 83M, PPE 240M */ |
| 558 | li a0,0xea |
| 559 | #endif |
| 560 | bal cgu_init |
| 561 | nop |
| 562 | |
| 563 | bal ebu_init |
| 564 | nop |
| 565 | |
| 566 | //06063001-joelin disable the PCI CFRAME mask-start |
| 567 | #ifdef DISABLE_CFRAME |
| 568 | li t1, PCI_CR_PCI //mw bf103034 80000000 |
| 569 | li t2, 0x80000000 |
| 570 | sw t2,0(t1) |
| 571 | |
| 572 | li t1, PCI_CR_PCI_MOD_REG //mw be105430 103 |
| 573 | li t2, 0x103 |
| 574 | sw t2,0(t1) |
| 575 | |
| 576 | li t1, CS_CFM //mw b700006c 0 |
| 577 | li t2, 0x00 |
| 578 | sw t2, 0(t1) |
| 579 | |
| 580 | li t1, PCI_CR_PCI_MOD_REG //mw be105430 103 |
| 581 | li t2, 0x1000103 |
| 582 | sw t2, 0(t1) |
| 583 | #endif |
| 584 | //06063001-joelin disable the PCI CFRAME mask-end |
| 585 | |
| 586 | #ifdef CONFIG_USE_DDR_RAM |
| 587 | bal ddrram_init |
| 588 | nop |
| 589 | #else |
| 590 | bal sdram_init |
| 591 | nop |
| 592 | #endif |
| 593 | move ra, t0 |
| 594 | j ra |
| 595 | nop |
| 596 | |
| 597 | .end lowlevel_init |
| 598 | |
