| 1 | /* |
| 2 | * Atheros PB92 board support |
| 3 | * |
| 4 | * Copyright (C) 2010 Felix Fietkau <nbd@openwrt.org> |
| 5 | * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> |
| 6 | * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or modify it |
| 9 | * under the terms of the GNU General Public License version 2 as published |
| 10 | * by the Free Software Foundation. |
| 11 | */ |
| 12 | |
| 13 | #include <linux/mtd/mtd.h> |
| 14 | #include <linux/mtd/partitions.h> |
| 15 | |
| 16 | #include <asm/mach-ath79/ath79.h> |
| 17 | |
| 18 | #include "dev-eth.h" |
| 19 | #include "dev-gpio-buttons.h" |
| 20 | #include "dev-m25p80.h" |
| 21 | #include "dev-usb.h" |
| 22 | #include "machtypes.h" |
| 23 | #include "pci.h" |
| 24 | |
| 25 | static struct mtd_partition pb92_partitions[] = { |
| 26 | { |
| 27 | .name = "u-boot", |
| 28 | .offset = 0, |
| 29 | .size = 0x040000, |
| 30 | .mask_flags = MTD_WRITEABLE, |
| 31 | }, { |
| 32 | .name = "u-boot-env", |
| 33 | .offset = 0x040000, |
| 34 | .size = 0x010000, |
| 35 | }, { |
| 36 | .name = "rootfs", |
| 37 | .offset = 0x050000, |
| 38 | .size = 0x2b0000, |
| 39 | }, { |
| 40 | .name = "uImage", |
| 41 | .offset = 0x300000, |
| 42 | .size = 0x0e0000, |
| 43 | }, { |
| 44 | .name = "ART", |
| 45 | .offset = 0x3e0000, |
| 46 | .size = 0x020000, |
| 47 | .mask_flags = MTD_WRITEABLE, |
| 48 | } |
| 49 | }; |
| 50 | |
| 51 | static struct flash_platform_data pb92_flash_data = { |
| 52 | .parts = pb92_partitions, |
| 53 | .nr_parts = ARRAY_SIZE(pb92_partitions), |
| 54 | }; |
| 55 | |
| 56 | #define PB92_KEYS_POLL_INTERVAL 20 /* msecs */ |
| 57 | #define PB92_KEYS_DEBOUNCE_INTERVAL (3 * PB92_KEYS_POLL_INTERVAL) |
| 58 | |
| 59 | #define PB92_GPIO_BTN_SW4 8 |
| 60 | #define PB92_GPIO_BTN_SW5 3 |
| 61 | |
| 62 | static struct gpio_keys_button pb92_gpio_keys[] __initdata = { |
| 63 | { |
| 64 | .desc = "sw4", |
| 65 | .type = EV_KEY, |
| 66 | .code = BTN_0, |
| 67 | .debounce_interval = PB92_KEYS_DEBOUNCE_INTERVAL, |
| 68 | .gpio = PB92_GPIO_BTN_SW4, |
| 69 | .active_low = 1, |
| 70 | }, { |
| 71 | .desc = "sw5", |
| 72 | .type = EV_KEY, |
| 73 | .code = BTN_1, |
| 74 | .debounce_interval = PB92_KEYS_DEBOUNCE_INTERVAL, |
| 75 | .gpio = PB92_GPIO_BTN_SW5, |
| 76 | .active_low = 1, |
| 77 | } |
| 78 | }; |
| 79 | |
| 80 | static void __init pb92_init(void) |
| 81 | { |
| 82 | u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000); |
| 83 | |
| 84 | ath79_register_m25p80(&pb92_flash_data); |
| 85 | |
| 86 | ath79_register_mdio(0, ~BIT(0)); |
| 87 | ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); |
| 88 | ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; |
| 89 | ath79_eth0_data.speed = SPEED_1000; |
| 90 | ath79_eth0_data.duplex = DUPLEX_FULL; |
| 91 | ath79_eth0_data.phy_mask = BIT(0); |
| 92 | |
| 93 | ath79_register_eth(0); |
| 94 | |
| 95 | ath79_register_gpio_keys_polled(-1, PB92_KEYS_POLL_INTERVAL, |
| 96 | ARRAY_SIZE(pb92_gpio_keys), |
| 97 | pb92_gpio_keys); |
| 98 | |
| 99 | ath79_register_usb(); |
| 100 | |
| 101 | ath79_register_pci(); |
| 102 | } |
| 103 | |
| 104 | MIPS_MACHINE(ATH79_MACH_PB92, "PB92", "Atheros PB92", pb92_init); |
| 105 | |
