| 1 | /* |
| 2 | * Copyright (c) 2004-2006 Atheros Communications Inc. |
| 3 | * All rights reserved. |
| 4 | * |
| 5 | * |
| 6 | * |
| 7 | * This program is free software; you can redistribute it and/or modify |
| 8 | * it under the terms of the GNU General Public License version 2 as |
| 9 | * published by the Free Software Foundation; |
| 10 | * |
| 11 | * Software distributed under the License is distributed on an "AS |
| 12 | * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or |
| 13 | * implied. See the License for the specific language governing |
| 14 | * rights and limitations under the License. |
| 15 | * |
| 16 | * |
| 17 | * |
| 18 | */ |
| 19 | |
| 20 | #ifndef _ATHDRV_LINUX_H |
| 21 | #define _ATHDRV_LINUX_H |
| 22 | |
| 23 | #ifdef __cplusplus |
| 24 | extern "C" { |
| 25 | #endif |
| 26 | |
| 27 | |
| 28 | /* |
| 29 | * There are two types of ioctl's here: Standard ioctls and |
| 30 | * eXtended ioctls. All extended ioctls (XIOCTL) are multiplexed |
| 31 | * off of the single ioctl command, AR6000_IOCTL_EXTENDED. The |
| 32 | * arguments for every XIOCTL starts with a 32-bit command word |
| 33 | * that is used to select which extended ioctl is in use. After |
| 34 | * the command word are command-specific arguments. |
| 35 | */ |
| 36 | |
| 37 | /* Linux standard Wireless Extensions, private ioctl interfaces */ |
| 38 | #define IEEE80211_IOCTL_SETPARAM (SIOCIWFIRSTPRIV+0) |
| 39 | #define IEEE80211_IOCTL_GETPARAM (SIOCIWFIRSTPRIV+1) |
| 40 | #define IEEE80211_IOCTL_SETKEY (SIOCIWFIRSTPRIV+2) |
| 41 | #define IEEE80211_IOCTL_SETWMMPARAMS (SIOCIWFIRSTPRIV+3) |
| 42 | #define IEEE80211_IOCTL_DELKEY (SIOCIWFIRSTPRIV+4) |
| 43 | #define IEEE80211_IOCTL_GETWMMPARAMS (SIOCIWFIRSTPRIV+5) |
| 44 | #define IEEE80211_IOCTL_SETOPTIE (SIOCIWFIRSTPRIV+6) |
| 45 | #define IEEE80211_IOCTL_SETMLME (SIOCIWFIRSTPRIV+7) |
| 46 | //#define IEEE80211_IOCTL_GETOPTIE (SIOCIWFIRSTPRIV+7) |
| 47 | #define IEEE80211_IOCTL_ADDPMKID (SIOCIWFIRSTPRIV+8) |
| 48 | //#define IEEE80211_IOCTL_SETAUTHALG (SIOCIWFIRSTPRIV+10) |
| 49 | #define IEEE80211_IOCTL_LASTONE (SIOCIWFIRSTPRIV+9) |
| 50 | |
| 51 | |
| 52 | |
| 53 | /* ====WMI Ioctls==== */ |
| 54 | /* |
| 55 | * |
| 56 | * Many ioctls simply provide WMI services to application code: |
| 57 | * an application makes such an ioctl call with a set of arguments |
| 58 | * that are packaged into the corresponding WMI message, and sent |
| 59 | * to the Target. |
| 60 | */ |
| 61 | |
| 62 | #define AR6000_IOCTL_WMI_GETREV (SIOCIWFIRSTPRIV+10) |
| 63 | /* |
| 64 | * arguments: |
| 65 | * ar6000_version *revision |
| 66 | */ |
| 67 | |
| 68 | #define AR6000_IOCTL_WMI_SETPWR (SIOCIWFIRSTPRIV+11) |
| 69 | /* |
| 70 | * arguments: |
| 71 | * WMI_POWER_MODE_CMD pwrModeCmd (see include/wmi.h) |
| 72 | * uses: WMI_SET_POWER_MODE_CMDID |
| 73 | */ |
| 74 | |
| 75 | #define AR6000_IOCTL_WMI_SETSCAN (SIOCIWFIRSTPRIV+12) |
| 76 | /* |
| 77 | * arguments: |
| 78 | * WMI_SCAN_PARAMS_CMD scanParams (see include/wmi.h) |
| 79 | * uses: WMI_SET_SCAN_PARAMS_CMDID |
| 80 | */ |
| 81 | |
| 82 | #define AR6000_IOCTL_WMI_SETLISTENINT (SIOCIWFIRSTPRIV+13) |
| 83 | /* |
| 84 | * arguments: |
| 85 | * UINT32 listenInterval |
| 86 | * uses: WMI_SET_LISTEN_INT_CMDID |
| 87 | */ |
| 88 | |
| 89 | #define AR6000_IOCTL_WMI_SETBSSFILTER (SIOCIWFIRSTPRIV+14) |
| 90 | /* |
| 91 | * arguments: |
| 92 | * WMI_BSS_FILTER filter (see include/wmi.h) |
| 93 | * uses: WMI_SET_BSS_FILTER_CMDID |
| 94 | */ |
| 95 | |
| 96 | #define AR6000_IOCTL_WMI_SET_CHANNELPARAMS (SIOCIWFIRSTPRIV+16) |
| 97 | /* |
| 98 | * arguments: |
| 99 | * WMI_CHANNEL_PARAMS_CMD chParams |
| 100 | * uses: WMI_SET_CHANNEL_PARAMS_CMDID |
| 101 | */ |
| 102 | |
| 103 | #define AR6000_IOCTL_WMI_SET_PROBEDSSID (SIOCIWFIRSTPRIV+17) |
| 104 | /* |
| 105 | * arguments: |
| 106 | * WMI_PROBED_SSID_CMD probedSsids (see include/wmi.h) |
| 107 | * uses: WMI_SETPROBED_SSID_CMDID |
| 108 | */ |
| 109 | |
| 110 | #define AR6000_IOCTL_WMI_SET_PMPARAMS (SIOCIWFIRSTPRIV+18) |
| 111 | /* |
| 112 | * arguments: |
| 113 | * WMI_POWER_PARAMS_CMD powerParams (see include/wmi.h) |
| 114 | * uses: WMI_SET_POWER_PARAMS_CMDID |
| 115 | */ |
| 116 | |
| 117 | #define AR6000_IOCTL_WMI_SET_BADAP (SIOCIWFIRSTPRIV+19) |
| 118 | /* |
| 119 | * arguments: |
| 120 | * WMI_ADD_BAD_AP_CMD badAPs (see include/wmi.h) |
| 121 | * uses: WMI_ADD_BAD_AP_CMDID |
| 122 | */ |
| 123 | |
| 124 | #define AR6000_IOCTL_WMI_GET_QOS_QUEUE (SIOCIWFIRSTPRIV+20) |
| 125 | /* |
| 126 | * arguments: |
| 127 | * ar6000_queuereq queueRequest (see below) |
| 128 | */ |
| 129 | |
| 130 | #define AR6000_IOCTL_WMI_CREATE_QOS (SIOCIWFIRSTPRIV+21) |
| 131 | /* |
| 132 | * arguments: |
| 133 | * WMI_CREATE_PSTREAM createPstreamCmd (see include/wmi.h) |
| 134 | * uses: WMI_CREATE_PSTREAM_CMDID |
| 135 | */ |
| 136 | |
| 137 | #define AR6000_IOCTL_WMI_DELETE_QOS (SIOCIWFIRSTPRIV+22) |
| 138 | /* |
| 139 | * arguments: |
| 140 | * WMI_DELETE_PSTREAM_CMD deletePstreamCmd (see include/wmi.h) |
| 141 | * uses: WMI_DELETE_PSTREAM_CMDID |
| 142 | */ |
| 143 | |
| 144 | #define AR6000_IOCTL_WMI_SET_SNRTHRESHOLD (SIOCIWFIRSTPRIV+23) |
| 145 | /* |
| 146 | * arguments: |
| 147 | * WMI_SNR_THRESHOLD_PARAMS_CMD thresholdParams (see include/wmi.h) |
| 148 | * uses: WMI_SNR_THRESHOLD_PARAMS_CMDID |
| 149 | */ |
| 150 | |
| 151 | #define AR6000_IOCTL_WMI_SET_ERROR_REPORT_BITMASK (SIOCIWFIRSTPRIV+24) |
| 152 | /* |
| 153 | * arguments: |
| 154 | * WMI_TARGET_ERROR_REPORT_BITMASK errorReportBitMask (see include/wmi.h) |
| 155 | * uses: WMI_TARGET_ERROR_REPORT_BITMASK_CMDID |
| 156 | */ |
| 157 | |
| 158 | #define AR6000_IOCTL_WMI_GET_TARGET_STATS (SIOCIWFIRSTPRIV+25) |
| 159 | /* |
| 160 | * arguments: |
| 161 | * TARGET_STATS *targetStats (see below) |
| 162 | * uses: WMI_GET_STATISTICS_CMDID |
| 163 | */ |
| 164 | |
| 165 | #define AR6000_IOCTL_WMI_SET_ASSOC_INFO (SIOCIWFIRSTPRIV+26) |
| 166 | /* |
| 167 | * arguments: |
| 168 | * WMI_SET_ASSOC_INFO_CMD setAssocInfoCmd |
| 169 | * uses: WMI_SET_ASSOC_INFO_CMDID |
| 170 | */ |
| 171 | |
| 172 | #define AR6000_IOCTL_WMI_SET_ACCESS_PARAMS (SIOCIWFIRSTPRIV+27) |
| 173 | /* |
| 174 | * arguments: |
| 175 | * WMI_SET_ACCESS_PARAMS_CMD setAccessParams (see include/wmi.h) |
| 176 | * uses: WMI_SET_ACCESS_PARAMS_CMDID |
| 177 | */ |
| 178 | |
| 179 | #define AR6000_IOCTL_WMI_SET_BMISS_TIME (SIOCIWFIRSTPRIV+28) |
| 180 | /* |
| 181 | * arguments: |
| 182 | * UINT32 beaconMissTime |
| 183 | * uses: WMI_SET_BMISS_TIME_CMDID |
| 184 | */ |
| 185 | |
| 186 | #define AR6000_IOCTL_WMI_SET_DISC_TIMEOUT (SIOCIWFIRSTPRIV+29) |
| 187 | /* |
| 188 | * arguments: |
| 189 | * WMI_DISC_TIMEOUT_CMD disconnectTimeoutCmd (see include/wmi.h) |
| 190 | * uses: WMI_SET_DISC_TIMEOUT_CMDID |
| 191 | */ |
| 192 | |
| 193 | #define AR6000_IOCTL_WMI_SET_IBSS_PM_CAPS (SIOCIWFIRSTPRIV+30) |
| 194 | /* |
| 195 | * arguments: |
| 196 | * WMI_IBSS_PM_CAPS_CMD ibssPowerMgmtCapsCmd |
| 197 | * uses: WMI_SET_IBSS_PM_CAPS_CMDID |
| 198 | */ |
| 199 | |
| 200 | /* |
| 201 | * There is a very small space available for driver-private |
| 202 | * wireless ioctls. In order to circumvent this limitation, |
| 203 | * we multiplex a bunch of ioctls (XIOCTLs) on top of a |
| 204 | * single AR6000_IOCTL_EXTENDED ioctl. |
| 205 | */ |
| 206 | #define AR6000_IOCTL_EXTENDED (SIOCIWFIRSTPRIV+31) |
| 207 | |
| 208 | |
| 209 | /* ====BMI Extended Ioctls==== */ |
| 210 | |
| 211 | #define AR6000_XIOCTL_BMI_DONE 1 |
| 212 | /* |
| 213 | * arguments: |
| 214 | * UINT32 cmd (AR6000_XIOCTL_BMI_DONE) |
| 215 | * uses: BMI_DONE |
| 216 | */ |
| 217 | |
| 218 | #define AR6000_XIOCTL_BMI_READ_MEMORY 2 |
| 219 | /* |
| 220 | * arguments: |
| 221 | * union { |
| 222 | * struct { |
| 223 | * UINT32 cmd (AR6000_XIOCTL_BMI_READ_MEMORY) |
| 224 | * UINT32 address |
| 225 | * UINT32 length |
| 226 | * } |
| 227 | * char results[length] |
| 228 | * } |
| 229 | * uses: BMI_READ_MEMORY |
| 230 | */ |
| 231 | |
| 232 | #define AR6000_XIOCTL_BMI_WRITE_MEMORY 3 |
| 233 | /* |
| 234 | * arguments: |
| 235 | * UINT32 cmd (AR6000_XIOCTL_BMI_WRITE_MEMORY) |
| 236 | * UINT32 address |
| 237 | * UINT32 length |
| 238 | * char data[length] |
| 239 | * uses: BMI_WRITE_MEMORY |
| 240 | */ |
| 241 | |
| 242 | #define AR6000_XIOCTL_BMI_EXECUTE 4 |
| 243 | /* |
| 244 | * arguments: |
| 245 | * UINT32 cmd (AR6000_XIOCTL_BMI_EXECUTE) |
| 246 | * UINT32 TargetAddress |
| 247 | * UINT32 parameter |
| 248 | * uses: BMI_EXECUTE |
| 249 | */ |
| 250 | |
| 251 | #define AR6000_XIOCTL_BMI_SET_APP_START 5 |
| 252 | /* |
| 253 | * arguments: |
| 254 | * UINT32 cmd (AR6000_XIOCTL_BMI_SET_APP_START) |
| 255 | * UINT32 TargetAddress |
| 256 | * uses: BMI_SET_APP_START |
| 257 | */ |
| 258 | |
| 259 | #define AR6000_XIOCTL_BMI_READ_SOC_REGISTER 6 |
| 260 | /* |
| 261 | * arguments: |
| 262 | * union { |
| 263 | * struct { |
| 264 | * UINT32 cmd (AR6000_XIOCTL_BMI_READ_SOC_REGISTER) |
| 265 | * UINT32 TargetAddress, 32-bit aligned |
| 266 | * } |
| 267 | * UINT32 result |
| 268 | * } |
| 269 | * uses: BMI_READ_SOC_REGISTER |
| 270 | */ |
| 271 | |
| 272 | #define AR6000_XIOCTL_BMI_WRITE_SOC_REGISTER 7 |
| 273 | /* |
| 274 | * arguments: |
| 275 | * struct { |
| 276 | * UINT32 cmd (AR6000_XIOCTL_BMI_WRITE_SOC_REGISTER) |
| 277 | * UINT32 TargetAddress, 32-bit aligned |
| 278 | * UINT32 newValue |
| 279 | * } |
| 280 | * uses: BMI_WRITE_SOC_REGISTER |
| 281 | */ |
| 282 | |
| 283 | #define AR6000_XIOCTL_BMI_TEST 8 |
| 284 | /* |
| 285 | * arguments: |
| 286 | * UINT32 cmd (AR6000_XIOCTL_BMI_TEST) |
| 287 | * UINT32 address |
| 288 | * UINT32 length |
| 289 | * UINT32 count |
| 290 | */ |
| 291 | |
| 292 | |
| 293 | |
| 294 | /* Historical Host-side DataSet support */ |
| 295 | #define AR6000_XIOCTL_UNUSED9 9 |
| 296 | #define AR6000_XIOCTL_UNUSED10 10 |
| 297 | #define AR6000_XIOCTL_UNUSED11 11 |
| 298 | |
| 299 | /* ====Misc Extended Ioctls==== */ |
| 300 | |
| 301 | #define AR6000_XIOCTL_FORCE_TARGET_RESET 12 |
| 302 | /* |
| 303 | * arguments: |
| 304 | * UINT32 cmd (AR6000_XIOCTL_FORCE_TARGET_RESET) |
| 305 | */ |
| 306 | |
| 307 | |
| 308 | #ifdef HTC_RAW_INTERFACE |
| 309 | /* HTC Raw Interface Ioctls */ |
| 310 | #define AR6000_XIOCTL_HTC_RAW_OPEN 13 |
| 311 | /* |
| 312 | * arguments: |
| 313 | * UINT32 cmd (AR6000_XIOCTL_HTC_RAW_OPEN) |
| 314 | */ |
| 315 | |
| 316 | #define AR6000_XIOCTL_HTC_RAW_CLOSE 14 |
| 317 | /* |
| 318 | * arguments: |
| 319 | * UINT32 cmd (AR6000_XIOCTL_HTC_RAW_CLOSE) |
| 320 | */ |
| 321 | |
| 322 | #define AR6000_XIOCTL_HTC_RAW_READ 15 |
| 323 | /* |
| 324 | * arguments: |
| 325 | * union { |
| 326 | * struct { |
| 327 | * UINT32 cmd (AR6000_XIOCTL_HTC_RAW_READ) |
| 328 | * UINT32 mailboxID |
| 329 | * UINT32 length |
| 330 | * } |
| 331 | * results[length] |
| 332 | * } |
| 333 | */ |
| 334 | |
| 335 | #define AR6000_XIOCTL_HTC_RAW_WRITE 16 |
| 336 | /* |
| 337 | * arguments: |
| 338 | * UINT32 cmd (AR6000_XIOCTL_HTC_RAW_WRITE) |
| 339 | * UINT32 mailboxID |
| 340 | * UINT32 length |
| 341 | * char buffer[length] |
| 342 | */ |
| 343 | #endif /* HTC_RAW_INTERFACE */ |
| 344 | |
| 345 | #define AR6000_XIOCTL_CHECK_TARGET_READY 17 |
| 346 | /* |
| 347 | * arguments: |
| 348 | * UINT32 cmd (AR6000_XIOCTL_CHECK_TARGET_READY) |
| 349 | */ |
| 350 | |
| 351 | |
| 352 | |
| 353 | /* ====GPIO (General Purpose I/O) Extended Ioctls==== */ |
| 354 | |
| 355 | #define AR6000_XIOCTL_GPIO_OUTPUT_SET 18 |
| 356 | /* |
| 357 | * arguments: |
| 358 | * UINT32 cmd (AR6000_XIOCTL_GPIO_OUTPUT_SET) |
| 359 | * ar6000_gpio_output_set_cmd_s (see below) |
| 360 | * uses: WMIX_GPIO_OUTPUT_SET_CMDID |
| 361 | */ |
| 362 | |
| 363 | #define AR6000_XIOCTL_GPIO_INPUT_GET 19 |
| 364 | /* |
| 365 | * arguments: |
| 366 | * UINT32 cmd (AR6000_XIOCTL_GPIO_INPUT_GET) |
| 367 | * uses: WMIX_GPIO_INPUT_GET_CMDID |
| 368 | */ |
| 369 | |
| 370 | #define AR6000_XIOCTL_GPIO_REGISTER_SET 20 |
| 371 | /* |
| 372 | * arguments: |
| 373 | * UINT32 cmd (AR6000_XIOCTL_GPIO_REGISTER_SET) |
| 374 | * ar6000_gpio_register_cmd_s (see below) |
| 375 | * uses: WMIX_GPIO_REGISTER_SET_CMDID |
| 376 | */ |
| 377 | |
| 378 | #define AR6000_XIOCTL_GPIO_REGISTER_GET 21 |
| 379 | /* |
| 380 | * arguments: |
| 381 | * UINT32 cmd (AR6000_XIOCTL_GPIO_REGISTER_GET) |
| 382 | * ar6000_gpio_register_cmd_s (see below) |
| 383 | * uses: WMIX_GPIO_REGISTER_GET_CMDID |
| 384 | */ |
| 385 | |
| 386 | #define AR6000_XIOCTL_GPIO_INTR_ACK 22 |
| 387 | /* |
| 388 | * arguments: |
| 389 | * UINT32 cmd (AR6000_XIOCTL_GPIO_INTR_ACK) |
| 390 | * ar6000_cpio_intr_ack_cmd_s (see below) |
| 391 | * uses: WMIX_GPIO_INTR_ACK_CMDID |
| 392 | */ |
| 393 | |
| 394 | #define AR6000_XIOCTL_GPIO_INTR_WAIT 23 |
| 395 | /* |
| 396 | * arguments: |
| 397 | * UINT32 cmd (AR6000_XIOCTL_GPIO_INTR_WAIT) |
| 398 | */ |
| 399 | |
| 400 | |
| 401 | |
| 402 | /* ====more wireless commands==== */ |
| 403 | |
| 404 | #define AR6000_XIOCTL_SET_ADHOC_BSSID 24 |
| 405 | /* |
| 406 | * arguments: |
| 407 | * UINT32 cmd (AR6000_XIOCTL_SET_ADHOC_BSSID) |
| 408 | * WMI_SET_ADHOC_BSSID_CMD setAdHocBssidCmd (see include/wmi.h) |
| 409 | */ |
| 410 | |
| 411 | #define AR6000_XIOCTL_SET_OPT_MODE 25 |
| 412 | /* |
| 413 | * arguments: |
| 414 | * UINT32 cmd (AR6000_XIOCTL_SET_OPT_MODE) |
| 415 | * WMI_SET_OPT_MODE_CMD setOptModeCmd (see include/wmi.h) |
| 416 | * uses: WMI_SET_OPT_MODE_CMDID |
| 417 | */ |
| 418 | |
| 419 | #define AR6000_XIOCTL_OPT_SEND_FRAME 26 |
| 420 | /* |
| 421 | * arguments: |
| 422 | * UINT32 cmd (AR6000_XIOCTL_OPT_SEND_FRAME) |
| 423 | * WMI_OPT_TX_FRAME_CMD optTxFrameCmd (see include/wmi.h) |
| 424 | * uses: WMI_OPT_TX_FRAME_CMDID |
| 425 | */ |
| 426 | |
| 427 | #define AR6000_XIOCTL_SET_ADHOC_BEACON_INTVAL 27 |
| 428 | /* |
| 429 | * arguments: |
| 430 | * UINT32 cmd (AR6000_XIOCTL_SET_ADHOC_BEACON_INTVAL) |
| 431 | * WMI_BEACON_INT_CMD beaconIntCmd (see include/wmi.h) |
| 432 | * uses: WMI_SET_BEACON_INT_CMDID |
| 433 | */ |
| 434 | |
| 435 | |
| 436 | #define IEEE80211_IOCTL_SETAUTHALG 28 |
| 437 | |
| 438 | |
| 439 | #define AR6000_XIOCTL_SET_VOICE_PKT_SIZE 29 |
| 440 | /* |
| 441 | * arguments: |
| 442 | * UINT32 cmd (AR6000_XIOCTL_SET_VOICE_PKT_SIZE) |
| 443 | * WMI_SET_VOICE_PKT_SIZE_CMD setVoicePktSizeCmd (see include/wmi.h) |
| 444 | * uses: WMI_SET_VOICE_PKT_SIZE_CMDID |
| 445 | */ |
| 446 | |
| 447 | |
| 448 | #define AR6000_XIOCTL_SET_MAX_SP 30 |
| 449 | /* |
| 450 | * arguments: |
| 451 | * UINT32 cmd (AR6000_XIOCTL_SET_MAX_SP) |
| 452 | * WMI_SET_MAX_SP_LEN_CMD maxSPLen(see include/wmi.h) |
| 453 | * uses: WMI_SET_MAX_SP_LEN_CMDID |
| 454 | */ |
| 455 | |
| 456 | #define AR6000_XIOCTL_WMI_GET_ROAM_TBL 31 |
| 457 | |
| 458 | #define AR6000_XIOCTL_WMI_SET_ROAM_CTRL 32 |
| 459 | |
| 460 | #define AR6000_XIOCTRL_WMI_SET_POWERSAVE_TIMERS 33 |
| 461 | |
| 462 | |
| 463 | /* |
| 464 | * arguments: |
| 465 | * UINT32 cmd (AR6000_XIOCTRL_WMI_SET_POWERSAVE_TIMERS) |
| 466 | * WMI_SET_POWERSAVE_TIMERS_CMD powerSaveTimers(see include/wmi.h) |
| 467 | * WMI_SET_POWERSAVE_TIMERS_CMDID |
| 468 | */ |
| 469 | |
| 470 | #define AR6000_XIOCTRL_WMI_GET_POWER_MODE 34 |
| 471 | /* |
| 472 | * arguments: |
| 473 | * UINT32 cmd (AR6000_XIOCTRL_WMI_GET_POWER_MODE) |
| 474 | */ |
| 475 | |
| 476 | #define AR6000_XIOCTRL_WMI_SET_WLAN_STATE 35 |
| 477 | typedef enum { |
| 478 | WLAN_DISABLED, |
| 479 | WLAN_ENABLED |
| 480 | } AR6000_WLAN_STATE; |
| 481 | /* |
| 482 | * arguments: |
| 483 | * enable/disable |
| 484 | */ |
| 485 | |
| 486 | #define AR6000_XIOCTL_WMI_GET_ROAM_DATA 36 |
| 487 | |
| 488 | #define AR6000_XIOCTL_WMI_SETRETRYLIMITS 37 |
| 489 | /* |
| 490 | * arguments: |
| 491 | * WMI_SET_RETRY_LIMITS_CMD ibssSetRetryLimitsCmd |
| 492 | * uses: WMI_SET_RETRY_LIMITS_CMDID |
| 493 | */ |
| 494 | |
| 495 | #ifdef CONFIG_HOST_TCMD_SUPPORT |
| 496 | /* ====extended commands for radio test ==== */ |
| 497 | |
| 498 | #define AR6000_XIOCTL_TCMD_CONT_TX 38 |
| 499 | /* |
| 500 | * arguments: |
| 501 | * UINT32 cmd (AR6000_XIOCTL_TCMD_CONT_TX) |
| 502 | * WMI_TCMD_CONT_TX_CMD contTxCmd (see include/wmi.h) |
| 503 | * uses: WMI_TCMD_CONT_TX_CMDID |
| 504 | */ |
| 505 | |
| 506 | #define AR6000_XIOCTL_TCMD_CONT_RX 39 |
| 507 | /* |
| 508 | * arguments: |
| 509 | * UINT32 cmd (AR6000_XIOCTL_TCMD_CONT_RX) |
| 510 | * WMI_TCMD_CONT_RX_CMD rxCmd (see include/wmi.h) |
| 511 | * uses: WMI_TCMD_CONT_RX_CMDID |
| 512 | */ |
| 513 | |
| 514 | #define AR6000_XIOCTL_TCMD_PM 40 |
| 515 | /* |
| 516 | * arguments: |
| 517 | * UINT32 cmd (AR6000_XIOCTL_TCMD_PM) |
| 518 | * WMI_TCMD_PM_CMD pmCmd (see include/wmi.h) |
| 519 | * uses: WMI_TCMD_PM_CMDID |
| 520 | */ |
| 521 | |
| 522 | #endif /* CONFIG_HOST_TCMD_SUPPORT */ |
| 523 | |
| 524 | #define AR6000_XIOCTL_WMI_STARTSCAN 41 |
| 525 | /* |
| 526 | * arguments: |
| 527 | * UINT32 cmd (AR6000_XIOCTL_WMI_STARTSCAN) |
| 528 | * UINT8 scanType |
| 529 | * UINT8 scanConnected |
| 530 | * A_BOOL forceFgScan |
| 531 | * uses: WMI_START_SCAN_CMDID |
| 532 | */ |
| 533 | |
| 534 | #define AR6000_XIOCTL_WMI_SETFIXRATES 42 |
| 535 | |
| 536 | #define AR6000_XIOCTL_WMI_GETFIXRATES 43 |
| 537 | |
| 538 | |
| 539 | #define AR6000_XIOCTL_WMI_SET_RSSITHRESHOLD 44 |
| 540 | /* |
| 541 | * arguments: |
| 542 | * WMI_RSSI_THRESHOLD_PARAMS_CMD thresholdParams (see include/wmi.h) |
| 543 | * uses: WMI_RSSI_THRESHOLD_PARAMS_CMDID |
| 544 | */ |
| 545 | |
| 546 | #define AR6000_XIOCTL_WMI_CLR_RSSISNR 45 |
| 547 | /* |
| 548 | * arguments: |
| 549 | * WMI_CLR_RSSISNR_CMD thresholdParams (see include/wmi.h) |
| 550 | * uses: WMI_CLR_RSSISNR_CMDID |
| 551 | */ |
| 552 | |
| 553 | #define AR6000_XIOCTL_WMI_SET_LQTHRESHOLD 46 |
| 554 | /* |
| 555 | * arguments: |
| 556 | * WMI_LQ_THRESHOLD_PARAMS_CMD thresholdParams (see include/wmi.h) |
| 557 | * uses: WMI_LQ_THRESHOLD_PARAMS_CMDID |
| 558 | */ |
| 559 | |
| 560 | #define AR6000_XIOCTL_WMI_SET_RTS 47 |
| 561 | /* |
| 562 | * arguments: |
| 563 | * WMI_SET_RTS_MODE_CMD (see include/wmi.h) |
| 564 | * uses: WMI_SET_RTS_MODE_CMDID |
| 565 | */ |
| 566 | |
| 567 | #define AR6000_XIOCTL_WMI_SET_LPREAMBLE 48 |
| 568 | |
| 569 | #define AR6000_XIOCTL_WMI_SET_AUTHMODE 49 |
| 570 | /* |
| 571 | * arguments: |
| 572 | * UINT32 cmd (AR6000_XIOCTL_WMI_SET_AUTHMODE) |
| 573 | * UINT8 mode |
| 574 | * uses: WMI_SET_RECONNECT_AUTH_MODE_CMDID |
| 575 | */ |
| 576 | |
| 577 | #define AR6000_XIOCTL_WMI_SET_REASSOCMODE 50 |
| 578 | |
| 579 | /* |
| 580 | * arguments: |
| 581 | * UINT32 cmd (AR6000_XIOCTL_WMI_SET_WMM) |
| 582 | * UINT8 mode |
| 583 | * uses: WMI_SET_WMM_CMDID |
| 584 | */ |
| 585 | #define AR6000_XIOCTL_WMI_SET_WMM 51 |
| 586 | |
| 587 | /* |
| 588 | * arguments: |
| 589 | * UINT32 cmd (AR6000_XIOCTL_WMI_SET_HB_CHALLENGE_RESP_PARAMS) |
| 590 | * UINT32 frequency |
| 591 | * UINT8 threshold |
| 592 | */ |
| 593 | #define AR6000_XIOCTL_WMI_SET_HB_CHALLENGE_RESP_PARAMS 52 |
| 594 | |
| 595 | /* |
| 596 | * arguments: |
| 597 | * UINT32 cmd (AR6000_XIOCTL_WMI_GET_HB_CHALLENGE_RESP) |
| 598 | * UINT32 cookie |
| 599 | */ |
| 600 | #define AR6000_XIOCTL_WMI_GET_HB_CHALLENGE_RESP 53 |
| 601 | |
| 602 | /* |
| 603 | * arguments: |
| 604 | * UINT32 cmd (AR6000_XIOCTL_WMI_GET_RD) |
| 605 | * UINT32 regDomain |
| 606 | */ |
| 607 | #define AR6000_XIOCTL_WMI_GET_RD 54 |
| 608 | |
| 609 | #define AR6000_XIOCTL_DIAG_READ 55 |
| 610 | |
| 611 | #define AR6000_XIOCTL_DIAG_WRITE 56 |
| 612 | |
| 613 | /* |
| 614 | * arguments cmd (AR6000_XIOCTL_SET_TXOP) |
| 615 | * WMI_TXOP_CFG txopEnable |
| 616 | */ |
| 617 | #define AR6000_XIOCTL_WMI_SET_TXOP 57 |
| 618 | |
| 619 | #ifdef USER_KEYS |
| 620 | /* |
| 621 | * arguments: |
| 622 | * UINT32 cmd (AR6000_XIOCTL_USER_SETKEYS) |
| 623 | * UINT32 keyOpCtrl |
| 624 | * uses AR6000_USER_SETKEYS_INFO |
| 625 | */ |
| 626 | #define AR6000_XIOCTL_USER_SETKEYS 58 |
| 627 | #endif /* USER_KEYS */ |
| 628 | |
| 629 | #define AR6000_XIOCTL_WMI_SET_KEEPALIVE 59 |
| 630 | /* |
| 631 | * arguments: |
| 632 | * UINT8 cmd (AR6000_XIOCTL_WMI_SET_KEEPALIVE) |
| 633 | * UINT8 keepaliveInterval |
| 634 | * uses: WMI_SET_KEEPALIVE_CMDID |
| 635 | */ |
| 636 | |
| 637 | #define AR6000_XIOCTL_WMI_GET_KEEPALIVE 60 |
| 638 | /* |
| 639 | * arguments: |
| 640 | * UINT8 cmd (AR6000_XIOCTL_WMI_GET_KEEPALIVE) |
| 641 | * UINT8 keepaliveInterval |
| 642 | * A_BOOL configured |
| 643 | * uses: WMI_GET_KEEPALIVE_CMDID |
| 644 | */ |
| 645 | |
| 646 | /* ====ROM Patching Extended Ioctls==== */ |
| 647 | |
| 648 | #define AR6000_XIOCTL_BMI_ROMPATCH_INSTALL 61 |
| 649 | /* |
| 650 | * arguments: |
| 651 | * union { |
| 652 | * struct { |
| 653 | * UINT32 cmd (AR6000_XIOCTL_BMI_ROMPATCH_INSTALL) |
| 654 | * UINT32 ROM Address |
| 655 | * UINT32 RAM Address |
| 656 | * UINT32 number of bytes |
| 657 | * UINT32 activate? (0 or 1) |
| 658 | * } |
| 659 | * A_UINT32 resulting rompatch ID |
| 660 | * } |
| 661 | * uses: BMI_ROMPATCH_INSTALL |
| 662 | */ |
| 663 | |
| 664 | #define AR6000_XIOCTL_BMI_ROMPATCH_UNINSTALL 62 |
| 665 | /* |
| 666 | * arguments: |
| 667 | * struct { |
| 668 | * UINT32 cmd (AR6000_XIOCTL_BMI_ROMPATCH_UNINSTALL) |
| 669 | * UINT32 rompatch ID |
| 670 | * } |
| 671 | * uses: BMI_ROMPATCH_UNINSTALL |
| 672 | */ |
| 673 | |
| 674 | #define AR6000_XIOCTL_BMI_ROMPATCH_ACTIVATE 63 |
| 675 | /* |
| 676 | * arguments: |
| 677 | * struct { |
| 678 | * UINT32 cmd (AR6000_XIOCTL_BMI_ROMPATCH_ACTIVATE) |
| 679 | * UINT32 rompatch count |
| 680 | * UINT32 rompatch IDs[rompatch count] |
| 681 | * } |
| 682 | * uses: BMI_ROMPATCH_ACTIVATE |
| 683 | */ |
| 684 | |
| 685 | #define AR6000_XIOCTL_BMI_ROMPATCH_DEACTIVATE 64 |
| 686 | /* |
| 687 | * arguments: |
| 688 | * struct { |
| 689 | * UINT32 cmd (AR6000_XIOCTL_BMI_ROMPATCH_DEACTIVATE) |
| 690 | * UINT32 rompatch count |
| 691 | * UINT32 rompatch IDs[rompatch count] |
| 692 | * } |
| 693 | * uses: BMI_ROMPATCH_DEACTIVATE |
| 694 | */ |
| 695 | |
| 696 | #define AR6000_XIOCTL_WMI_SET_APPIE 65 |
| 697 | /* |
| 698 | * arguments: |
| 699 | * struct { |
| 700 | * UINT32 cmd (AR6000_XIOCTL_WMI_SET_APPIE) |
| 701 | * UINT32 app_frmtype; |
| 702 | * UINT32 app_buflen; |
| 703 | * UINT8 app_buf[]; |
| 704 | * } |
| 705 | */ |
| 706 | #define AR6000_XIOCTL_WMI_SET_MGMT_FRM_RX_FILTER 66 |
| 707 | /* |
| 708 | * arguments: |
| 709 | * A_UINT32 filter_type; |
| 710 | */ |
| 711 | |
| 712 | #define AR6000_XIOCTL_DBGLOG_CFG_MODULE 67 |
| 713 | |
| 714 | #define AR6000_XIOCTL_DBGLOG_GET_DEBUG_LOGS 68 |
| 715 | |
| 716 | #define AR6000_XIOCTL_WMI_SET_WSC_STATUS 70 |
| 717 | /* |
| 718 | * arguments: |
| 719 | * A_UINT32 wsc_status; |
| 720 | * (WSC_REG_INACTIVE or WSC_REG_ACTIVE) |
| 721 | */ |
| 722 | |
| 723 | /* |
| 724 | * arguments: |
| 725 | * struct { |
| 726 | * A_UINT8 streamType; |
| 727 | * A_UINT8 status; |
| 728 | * } |
| 729 | * uses: WMI_SET_BT_STATUS_CMDID |
| 730 | */ |
| 731 | #define AR6000_XIOCTL_WMI_SET_BT_STATUS 71 |
| 732 | |
| 733 | /* |
| 734 | * arguments: |
| 735 | * struct { |
| 736 | * A_UINT8 paramType; |
| 737 | * union { |
| 738 | * A_UINT8 noSCOPkts; |
| 739 | * BT_PARAMS_A2DP a2dpParams; |
| 740 | * BT_COEX_REGS regs; |
| 741 | * }; |
| 742 | * } |
| 743 | * uses: WMI_SET_BT_PARAM_CMDID |
| 744 | */ |
| 745 | #define AR6000_XIOCTL_WMI_SET_BT_PARAMS 72 |
| 746 | |
| 747 | #define AR6000_XIOCTL_WMI_SET_HOST_SLEEP_MODE 73 |
| 748 | #define AR6000_XIOCTL_WMI_SET_WOW_MODE 74 |
| 749 | #define AR6000_XIOCTL_WMI_GET_WOW_LIST 75 |
| 750 | #define AR6000_XIOCTL_WMI_ADD_WOW_PATTERN 76 |
| 751 | #define AR6000_XIOCTL_WMI_DEL_WOW_PATTERN 77 |
| 752 | |
| 753 | |
| 754 | |
| 755 | #define AR6000_XIOCTL_TARGET_INFO 78 |
| 756 | /* |
| 757 | * arguments: |
| 758 | * UINT32 cmd (AR6000_XIOCTL_TARGET_INFO) |
| 759 | * A_UINT32 TargetVersion (returned) |
| 760 | * A_UINT32 TargetType (returned) |
| 761 | * (See also bmi_msg.h target_ver and target_type) |
| 762 | */ |
| 763 | |
| 764 | #define AR6000_XIOCTL_DUMP_HTC_CREDIT_STATE 79 |
| 765 | /* |
| 766 | * arguments: |
| 767 | * none |
| 768 | */ |
| 769 | |
| 770 | #define AR6000_XIOCTL_TRAFFIC_ACTIVITY_CHANGE 80 |
| 771 | /* |
| 772 | * This ioctl is used to emulate traffic activity |
| 773 | * timeouts. Activity/inactivity will trigger the driver |
| 774 | * to re-balance credits. |
| 775 | * |
| 776 | * arguments: |
| 777 | * ar6000_traffic_activity_change |
| 778 | */ |
| 779 | |
| 780 | #define AR6000_XIOCTL_WMI_SET_CONNECT_CTRL_FLAGS 81 |
| 781 | /* |
| 782 | * This ioctl is used to set the connect control flags |
| 783 | * |
| 784 | * arguments: |
| 785 | * A_UINT32 connectCtrlFlags |
| 786 | */ |
| 787 | |
| 788 | #define AR6000_XIOCTL_WMI_SET_AKMP_PARAMS 82 |
| 789 | /* |
| 790 | * This IOCTL sets any Authentication,Key Management and Protection |
| 791 | * related parameters. This is used along with the information set in |
| 792 | * Connect Command. |
| 793 | * Currently this enables Multiple PMKIDs to an AP. |
| 794 | * |
| 795 | * arguments: |
| 796 | * struct { |
| 797 | * A_UINT32 akmpInfo; |
| 798 | * } |
| 799 | * uses: WMI_SET_AKMP_PARAMS_CMD |
| 800 | */ |
| 801 | |
| 802 | #define AR6000_XIOCTL_WMI_GET_PMKID_LIST 83 |
| 803 | |
| 804 | #define AR6000_XIOCTL_WMI_SET_PMKID_LIST 84 |
| 805 | /* |
| 806 | * This IOCTL is used to set a list of PMKIDs. This list of |
| 807 | * PMKIDs is used in the [Re]AssocReq Frame. This list is used |
| 808 | * only if the MultiPMKID option is enabled via the |
| 809 | * AR6000_XIOCTL_WMI_SET_AKMP_PARAMS IOCTL. |
| 810 | * |
| 811 | * arguments: |
| 812 | * struct { |
| 813 | * A_UINT32 numPMKID; |
| 814 | * WMI_PMKID pmkidList[WMI_MAX_PMKID_CACHE]; |
| 815 | * } |
| 816 | * uses: WMI_SET_PMKIDLIST_CMD |
| 817 | */ |
| 818 | |
| 819 | /* Historical DSETPATCH support for INI patches */ |
| 820 | #define AR6000_XIOCTL_UNUSED90 90 |
| 821 | |
| 822 | |
| 823 | |
| 824 | /* used by AR6000_IOCTL_WMI_GETREV */ |
| 825 | struct ar6000_version { |
| 826 | A_UINT32 host_ver; |
| 827 | A_UINT32 target_ver; |
| 828 | }; |
| 829 | |
| 830 | /* used by AR6000_IOCTL_WMI_GET_QOS_QUEUE */ |
| 831 | struct ar6000_queuereq { |
| 832 | A_UINT8 trafficClass; |
| 833 | A_UINT16 activeTsids; |
| 834 | }; |
| 835 | |
| 836 | /* used by AR6000_IOCTL_WMI_GET_TARGET_STATS */ |
| 837 | typedef struct targetStats_t { |
| 838 | A_UINT64 tx_packets; |
| 839 | A_UINT64 tx_bytes; |
| 840 | A_UINT64 tx_unicast_pkts; |
| 841 | A_UINT64 tx_unicast_bytes; |
| 842 | A_UINT64 tx_multicast_pkts; |
| 843 | A_UINT64 tx_multicast_bytes; |
| 844 | A_UINT64 tx_broadcast_pkts; |
| 845 | A_UINT64 tx_broadcast_bytes; |
| 846 | A_UINT64 tx_rts_success_cnt; |
| 847 | A_UINT64 tx_packet_per_ac[4]; |
| 848 | |
| 849 | A_UINT64 tx_errors; |
| 850 | A_UINT64 tx_failed_cnt; |
| 851 | A_UINT64 tx_retry_cnt; |
| 852 | A_UINT64 tx_rts_fail_cnt; |
| 853 | A_INT32 tx_unicast_rate; |
| 854 | A_UINT64 rx_packets; |
| 855 | A_UINT64 rx_bytes; |
| 856 | A_UINT64 rx_unicast_pkts; |
| 857 | A_UINT64 rx_unicast_bytes; |
| 858 | A_UINT64 rx_multicast_pkts; |
| 859 | A_UINT64 rx_multicast_bytes; |
| 860 | A_UINT64 rx_broadcast_pkts; |
| 861 | A_UINT64 rx_broadcast_bytes; |
| 862 | A_UINT64 rx_fragment_pkt; |
| 863 | |
| 864 | A_UINT64 rx_errors; |
| 865 | A_UINT64 rx_crcerr; |
| 866 | A_UINT64 rx_key_cache_miss; |
| 867 | A_UINT64 rx_decrypt_err; |
| 868 | A_UINT64 rx_duplicate_frames; |
| 869 | A_INT32 rx_unicast_rate; |
| 870 | |
| 871 | A_UINT64 tkip_local_mic_failure; |
| 872 | A_UINT64 tkip_counter_measures_invoked; |
| 873 | A_UINT64 tkip_replays; |
| 874 | A_UINT64 tkip_format_errors; |
| 875 | A_UINT64 ccmp_format_errors; |
| 876 | A_UINT64 ccmp_replays; |
| 877 | |
| 878 | A_UINT64 power_save_failure_cnt; |
| 879 | A_INT16 noise_floor_calibation; |
| 880 | |
| 881 | A_UINT64 cs_bmiss_cnt; |
| 882 | A_UINT64 cs_lowRssi_cnt; |
| 883 | A_UINT64 cs_connect_cnt; |
| 884 | A_UINT64 cs_disconnect_cnt; |
| 885 | A_UINT8 cs_aveBeacon_snr; |
| 886 | A_INT16 cs_aveBeacon_rssi; |
| 887 | A_UINT8 cs_lastRoam_msec; |
| 888 | A_UINT8 cs_snr; |
| 889 | A_INT16 cs_rssi; |
| 890 | |
| 891 | A_UINT32 lq_val; |
| 892 | |
| 893 | A_UINT32 wow_num_pkts_dropped; |
| 894 | A_UINT8 wow_num_host_pkt_wakeups; |
| 895 | A_UINT8 wow_num_host_event_wakeups; |
| 896 | A_UINT16 wow_num_events_discarded; |
| 897 | |
| 898 | }TARGET_STATS; |
| 899 | |
| 900 | typedef struct targetStats_cmd_t { |
| 901 | TARGET_STATS targetStats; |
| 902 | int clearStats; |
| 903 | } TARGET_STATS_CMD; |
| 904 | |
| 905 | /* used by AR6000_XIOCTL_USER_SETKEYS */ |
| 906 | |
| 907 | /* |
| 908 | * Setting this bit to 1 doesnot initialize the RSC on the firmware |
| 909 | */ |
| 910 | #define AR6000_XIOCTL_USER_SETKEYS_RSC_CTRL 1 |
| 911 | #define AR6000_USER_SETKEYS_RSC_UNCHANGED 0x00000002 |
| 912 | |
| 913 | typedef struct { |
| 914 | A_UINT32 keyOpCtrl; /* Bit Map of Key Mgmt Ctrl Flags */ |
| 915 | } AR6000_USER_SETKEYS_INFO; |
| 916 | |
| 917 | |
| 918 | /* used by AR6000_XIOCTL_GPIO_OUTPUT_SET */ |
| 919 | struct ar6000_gpio_output_set_cmd_s { |
| 920 | A_UINT32 set_mask; |
| 921 | A_UINT32 clear_mask; |
| 922 | A_UINT32 enable_mask; |
| 923 | A_UINT32 disable_mask; |
| 924 | }; |
| 925 | |
| 926 | /* |
| 927 | * used by AR6000_XIOCTL_GPIO_REGISTER_GET and AR6000_XIOCTL_GPIO_REGISTER_SET |
| 928 | */ |
| 929 | struct ar6000_gpio_register_cmd_s { |
| 930 | A_UINT32 gpioreg_id; |
| 931 | A_UINT32 value; |
| 932 | }; |
| 933 | |
| 934 | /* used by AR6000_XIOCTL_GPIO_INTR_ACK */ |
| 935 | struct ar6000_gpio_intr_ack_cmd_s { |
| 936 | A_UINT32 ack_mask; |
| 937 | }; |
| 938 | |
| 939 | /* used by AR6000_XIOCTL_GPIO_INTR_WAIT */ |
| 940 | struct ar6000_gpio_intr_wait_cmd_s { |
| 941 | A_UINT32 intr_mask; |
| 942 | A_UINT32 input_values; |
| 943 | }; |
| 944 | |
| 945 | /* used by the AR6000_XIOCTL_DBGLOG_CFG_MODULE */ |
| 946 | typedef struct ar6000_dbglog_module_config_s { |
| 947 | A_UINT32 valid; |
| 948 | A_UINT16 mmask; |
| 949 | A_UINT16 tsr; |
| 950 | A_BOOL rep; |
| 951 | A_UINT16 size; |
| 952 | } DBGLOG_MODULE_CONFIG; |
| 953 | |
| 954 | typedef struct user_rssi_thold_t { |
| 955 | A_INT16 tag; |
| 956 | A_INT16 rssi; |
| 957 | } USER_RSSI_THOLD; |
| 958 | |
| 959 | typedef struct user_rssi_params_t { |
| 960 | A_UINT8 weight; |
| 961 | A_UINT32 pollTime; |
| 962 | USER_RSSI_THOLD tholds[12]; |
| 963 | } USER_RSSI_PARAMS; |
| 964 | |
| 965 | /* |
| 966 | * Host driver may have some config parameters. Typically, these |
| 967 | * config params are one time config parameters. These could |
| 968 | * correspond to any of the underlying modules. Host driver exposes |
| 969 | * an api for the underlying modules to get this config. |
| 970 | */ |
| 971 | #define AR6000_DRIVER_CFG_BASE 0x8000 |
| 972 | |
| 973 | /* Should driver perform wlan node caching? */ |
| 974 | #define AR6000_DRIVER_CFG_GET_WLANNODECACHING 0x8001 |
| 975 | /*Should we log raw WMI msgs */ |
| 976 | #define AR6000_DRIVER_CFG_LOG_RAW_WMI_MSGS 0x8002 |
| 977 | |
| 978 | /* used by AR6000_XIOCTL_DIAG_READ & AR6000_XIOCTL_DIAG_WRITE */ |
| 979 | struct ar6000_diag_window_cmd_s { |
| 980 | unsigned int addr; |
| 981 | unsigned int value; |
| 982 | }; |
| 983 | |
| 984 | |
| 985 | struct ar6000_traffic_activity_change { |
| 986 | A_UINT32 StreamID; /* stream ID to indicate activity change */ |
| 987 | A_UINT32 Active; /* active (1) or inactive (0) */ |
| 988 | }; |
| 989 | |
| 990 | #ifdef __cplusplus |
| 991 | } |
| 992 | #endif |
| 993 | #endif |
| 994 | |
