| 1 | --- a/arch/mips/lantiq/machtypes.h |
| 2 | +++ b/arch/mips/lantiq/machtypes.h |
| 3 | @@ -32,6 +32,9 @@ |
| 4 | LANTIQ_MACH_ARV752DPW, /* Arcor easybox a802 */ |
| 5 | LANTIQ_MACH_ARV752DPW22, /* Arcor easybox a803 */ |
| 6 | LANTIQ_MACH_ARV7518PW, /* ASTORIA */ |
| 7 | + |
| 8 | + /* Netgear */ |
| 9 | + LANTIQ_MACH_DGN3500B, /* Netgear DGN3500 */ |
| 10 | }; |
| 11 | |
| 12 | #endif |
| 13 | --- a/arch/mips/lantiq/xway/Kconfig |
| 14 | +++ b/arch/mips/lantiq/xway/Kconfig |
| 15 | @@ -10,6 +10,10 @@ |
| 16 | bool "ARV45XX" |
| 17 | default y |
| 18 | |
| 19 | +config LANTIQ_MACH_NETGEAR |
| 20 | + bool "Netgear" |
| 21 | + default y |
| 22 | + |
| 23 | endmenu |
| 24 | |
| 25 | endif |
| 26 | --- a/arch/mips/lantiq/xway/Makefile |
| 27 | +++ b/arch/mips/lantiq/xway/Makefile |
| 28 | @@ -6,4 +6,5 @@ |
| 29 | obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o |
| 30 | obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o |
| 31 | obj-$(CONFIG_LANTIQ_MACH_ARV45XX) += mach-arv45xx.o |
| 32 | +obj-$(CONFIG_LANTIQ_MACH_NETGEAR) += mach-netgear.o |
| 33 | obj-y += dev-dwc_otg.o |
| 34 | --- a/arch/mips/lantiq/xway/devices.h |
| 35 | +++ b/arch/mips/lantiq/xway/devices.h |
| 36 | @@ -12,6 +12,7 @@ |
| 37 | #include "../devices.h" |
| 38 | #include <linux/phy.h> |
| 39 | #include <linux/gpio_buttons.h> |
| 40 | +#include <linux/spi/spi.h> |
| 41 | |
| 42 | extern void ltq_register_gpio(void); |
| 43 | extern void ltq_register_gpio_stp(void); |
| 44 | @@ -20,5 +21,7 @@ |
| 45 | extern void ltq_register_gpio_ebu(unsigned int value); |
| 46 | extern void ltq_register_madwifi_eep(void); |
| 47 | extern void ltq_register_gpio_buttons(struct gpio_button *buttons, int cnt); |
| 48 | +extern void ltq_register_spi(struct ltq_spi_platform_data *pdata, |
| 49 | + struct spi_board_info const *info, unsigned n); |
| 50 | |
| 51 | #endif |
| 52 | --- /dev/null |
| 53 | +++ b/arch/mips/lantiq/xway/mach-netgear.c |
| 54 | @@ -0,0 +1,57 @@ |
| 55 | +/* |
| 56 | + * This program is free software; you can redistribute it and/or modify it |
| 57 | + * under the terms of the GNU General Public License version 2 as published |
| 58 | + * by the Free Software Foundation. |
| 59 | + * |
| 60 | + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> |
| 61 | + */ |
| 62 | + |
| 63 | +#include <linux/init.h> |
| 64 | +#include <linux/platform_device.h> |
| 65 | +#include <linux/mtd/mtd.h> |
| 66 | +#include <linux/mtd/partitions.h> |
| 67 | +#include <linux/mtd/physmap.h> |
| 68 | +#include <linux/input.h> |
| 69 | +#include <linux/phy.h> |
| 70 | +#include <linux/spi/spi.h> |
| 71 | + |
| 72 | +#include <lantiq_soc.h> |
| 73 | +#include <irq.h> |
| 74 | + |
| 75 | +#include "../machtypes.h" |
| 76 | +#include "devices.h" |
| 77 | + |
| 78 | +static struct ltq_pci_data ltq_pci_data = { |
| 79 | + .clock = PCI_CLOCK_INT, |
| 80 | + .gpio = PCI_GNT1 | PCI_REQ1, |
| 81 | + .irq = { |
| 82 | + [14] = INT_NUM_IM0_IRL0 + 22, |
| 83 | + }, |
| 84 | +}; |
| 85 | + |
| 86 | +static struct ltq_eth_data ltq_eth_data = { |
| 87 | + .mii_mode = PHY_INTERFACE_MODE_MII, |
| 88 | +}; |
| 89 | + |
| 90 | +struct spi_board_info spi_info = { |
| 91 | + .bus_num = 0, |
| 92 | + .chip_select = 3, |
| 93 | + .max_speed_hz = 25000000, |
| 94 | + .modalias = "mx25l12805d", |
| 95 | +}; |
| 96 | + |
| 97 | +struct ltq_spi_platform_data ltq_spi_data = { |
| 98 | + .num_chipselect = 4, |
| 99 | +}; |
| 100 | + |
| 101 | +static void __init dgn3500_init(void) |
| 102 | +{ |
| 103 | + ltq_register_pci(<q_pci_data); |
| 104 | + ltq_register_etop(<q_eth_data); |
| 105 | + ltq_register_spi(<q_spi_data, &spi_info, 1); |
| 106 | +} |
| 107 | + |
| 108 | +MIPS_MACHINE(LANTIQ_MACH_DGN3500B, |
| 109 | + "DGN3500B", |
| 110 | + "Netgear DGN3500B", |
| 111 | + dgn3500_init); |
| 112 | |
