Root/target/linux/brcm63xx/patches-3.3/526-board_CT6373-1.patch

1--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
2+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
3@@ -51,6 +51,13 @@
4 #define NB4_SPI_GPIO_CLK 6
5 #define NB4_74HC64_GPIO(X) (NB4_74X164_GPIO_BASE + (X))
6 
7+#define CT6373_PID_OFFSET 0xff80
8+#define CT6373_74X164_GPIO_BASE 64
9+#define CT6373_SPI_GPIO_MOSI 7
10+#define CT6373_SPI_GPIO_CLK 6
11+#define CT6373_74HC64_GPIO(X) (CT6373_74X164_GPIO_BASE + (X))
12+
13+
14 static struct board_info board;
15 
16 /*
17@@ -2261,6 +2268,111 @@ static struct board_info __initdata boar
18     .num_spis = ARRAY_SIZE(nb4_spi_devices),
19 };
20 
21+
22+struct spi_gpio_platform_data ct6373_spi_gpio_data = {
23+ .sck = CT6373_SPI_GPIO_CLK,
24+ .mosi = CT6373_SPI_GPIO_MOSI,
25+ .miso = SPI_GPIO_NO_MISO,
26+ .num_chipselect = 1,
27+};
28+
29+static struct platform_device ct6373_spi_gpio = {
30+ .name = "spi_gpio",
31+ .id = 1,
32+ .dev = {
33+ .platform_data = &ct6373_spi_gpio_data,
34+ },
35+};
36+
37+static struct platform_device * __initdata ct6373_devices[] = {
38+ &ct6373_spi_gpio,
39+};
40+
41+const struct gen_74x164_chip_platform_data ct6373_74x164_platform_data = {
42+ .base = CT6373_74X164_GPIO_BASE
43+};
44+
45+static struct spi_board_info ct6373_spi_devices[] = {
46+ {
47+ .modalias = "74x164",
48+ .max_speed_hz = 781000,
49+ .bus_num = 1,
50+ .controller_data = (void *) SPI_GPIO_NO_CHIPSELECT,
51+ .mode = SPI_MODE_0,
52+ .platform_data = &ct6373_74x164_platform_data
53+ }
54+};
55+
56+static struct board_info __initdata board_ct6373_1 = {
57+ .name = "CT6373-1",
58+ .expected_cpu_id = 0x6358,
59+
60+ .has_uart0 = 1,
61+ .has_pci = 1,
62+ .has_ohci0 = 1,
63+ .has_ehci0 = 1,
64+
65+ .has_enet1 = 1,
66+ .enet1 = {
67+ .force_speed_100 = 1,
68+ .force_duplex_full = 1,
69+ },
70+
71+ .leds = {
72+ {
73+ .name = "CT6373-1:green:power",
74+ .gpio = 0,
75+ .default_trigger = "default-on",
76+ },
77+ {
78+ .name = "CT6373-1:green:usb",
79+ .gpio = 3,
80+ .active_low = 1,
81+ },
82+ {
83+ .name = "CT6373-1:green:wlan",
84+ .gpio = 9,
85+ .active_low = 1,
86+ },
87+ {
88+ .name = "CT6373-1:green:adsl",
89+ .gpio = CT6373_74HC64_GPIO(0),
90+ .active_low = 1,
91+ },
92+ {
93+ .name = "CT6373-1:green:line",
94+ .gpio = CT6373_74HC64_GPIO(1),
95+ .active_low = 1,
96+ },
97+ {
98+ .name = "CT6373-1:green:fxs1",
99+ .gpio = CT6373_74HC64_GPIO(2),
100+ .active_low = 1,
101+ },
102+ {
103+ .name = "CT6373-1:green:fxs2",
104+ .gpio = CT6373_74HC64_GPIO(3),
105+ .active_low = 1,
106+ },
107+ },
108+
109+ .buttons = {
110+ {
111+ .desc = "reset",
112+ .gpio = 35,
113+ .active_low = 1,
114+ .type = EV_KEY,
115+ .code = KEY_RESTART,
116+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
117+ },
118+ },
119+
120+ .devs = ct6373_devices,
121+ .num_devs = ARRAY_SIZE(ct6373_devices),
122+ .spis = ct6373_spi_devices,
123+ .num_spis = ARRAY_SIZE(ct6373_spi_devices),
124+};
125+
126 static struct board_info __initdata board_HW553 = {
127     .name = "HW553",
128     .expected_cpu_id = 0x6358,
129@@ -2592,6 +2704,7 @@ static const struct board_info __initdat
130     &board_nb4_ser_r2,
131     &board_nb4_fxc_r1,
132     &board_nb4_fxc_r2,
133+ &board_ct6373_1,
134     &board_HW553,
135     &board_spw303v,
136 #endif
137

Archive Download this file

Branches:
backfire
history
master
release_2010-11-17
release_2010-12-14
release_2011-02-23
release_2011-05-28
release_2011-08-27
release_2011-11-13
release_2012-03-18
release_2012-04-09
release_2012-10-11
uclibc_nptl



interactive