| 1 | --- a/arch/arm/mach-gemini/board-rut1xx.c |
| 2 | +++ b/arch/arm/mach-gemini/board-rut1xx.c |
| 3 | @@ -14,13 +14,35 @@ |
| 4 | #include <linux/leds.h> |
| 5 | #include <linux/input.h> |
| 6 | #include <linux/gpio_keys.h> |
| 7 | +#include <linux/mdio-gpio.h> |
| 8 | |
| 9 | #include <asm/mach-types.h> |
| 10 | #include <asm/mach/arch.h> |
| 11 | #include <asm/mach/time.h> |
| 12 | |
| 13 | +#include <mach/gmac.h> |
| 14 | + |
| 15 | #include "common.h" |
| 16 | |
| 17 | +static struct mdio_gpio_platform_data rut1xx_mdio = { |
| 18 | + .mdc = 22, |
| 19 | + .mdio = 21, |
| 20 | + .phy_mask = ~(1 << 1), |
| 21 | +}; |
| 22 | + |
| 23 | +static struct platform_device rut1xx_phy_device = { |
| 24 | + .name = "mdio-gpio", |
| 25 | + .id = 0, |
| 26 | + .dev = { |
| 27 | + .platform_data = &rut1xx_mdio, |
| 28 | + }, |
| 29 | +}; |
| 30 | + |
| 31 | +static struct gemini_gmac_platform_data gmac_data = { |
| 32 | + .bus_id[0] = "gpio-0:01", |
| 33 | + .interface[0] = PHY_INTERFACE_MODE_MII, |
| 34 | +}; |
| 35 | + |
| 36 | static struct gpio_keys_button rut1xx_keys[] = { |
| 37 | { |
| 38 | .code = KEY_SETUP, |
| 39 | @@ -84,6 +106,8 @@ static void __init rut1xx_init(void) |
| 40 | platform_device_register(&rut1xx_keys_device); |
| 41 | platform_register_rtc(); |
| 42 | platform_register_watchdog(); |
| 43 | + platform_device_register(&rut1xx_phy_device); |
| 44 | + platform_register_ethernet(&gmac_data); |
| 45 | } |
| 46 | |
| 47 | MACHINE_START(RUT100, "Teltonika RUT100") |
| 48 | |
