| 1 | --- a/drivers/usb/host/ehci-hcd.c |
| 2 | +++ b/drivers/usb/host/ehci-hcd.c |
| 3 | @@ -795,7 +795,7 @@ static int ehci_run (struct usb_hcd *hcd |
| 4 | "USB %x.%x started, EHCI %x.%02x%s\n", |
| 5 | ((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f), |
| 6 | temp >> 8, temp & 0xff, |
| 7 | - ignore_oc ? ", overcurrent ignored" : ""); |
| 8 | + (ignore_oc || ehci->ignore_oc) ? ", overcurrent ignored" : ""); |
| 9 | |
| 10 | ehci_writel(ehci, INTR_MASK, |
| 11 | &ehci->regs->intr_enable); /* Turn On Interrupts */ |
| 12 | --- a/drivers/usb/host/ehci-hub.c |
| 13 | +++ b/drivers/usb/host/ehci-hub.c |
| 14 | @@ -578,7 +578,7 @@ ehci_hub_status_data (struct usb_hcd *hc |
| 15 | * always set, seem to clear PORT_OCC and PORT_CSC when writing to |
| 16 | * PORT_POWER; that's surprising, but maybe within-spec. |
| 17 | */ |
| 18 | - if (!ignore_oc) |
| 19 | + if (!ignore_oc && !ehci->ignore_oc) |
| 20 | mask = PORT_CSC | PORT_PEC | PORT_OCC; |
| 21 | else |
| 22 | mask = PORT_CSC | PORT_PEC; |
| 23 | @@ -803,7 +803,7 @@ static int ehci_hub_control ( |
| 24 | if (temp & PORT_PEC) |
| 25 | status |= USB_PORT_STAT_C_ENABLE << 16; |
| 26 | |
| 27 | - if ((temp & PORT_OCC) && !ignore_oc){ |
| 28 | + if ((temp & PORT_OCC) && (!ignore_oc && !ehci->ignore_oc)){ |
| 29 | status |= USB_PORT_STAT_C_OVERCURRENT << 16; |
| 30 | |
| 31 | /* |
| 32 | --- a/drivers/usb/host/ehci.h |
| 33 | +++ b/drivers/usb/host/ehci.h |
| 34 | @@ -147,6 +147,7 @@ struct ehci_hcd { /* one per controlle |
| 35 | unsigned use_dummy_qh:1; /* AMD Frame List table quirk*/ |
| 36 | unsigned has_synopsys_hc_bug:1; /* Synopsys HC */ |
| 37 | unsigned frame_index_bug:1; /* MosChip (AKA NetMos) */ |
| 38 | + unsigned ignore_oc:1; |
| 39 | |
| 40 | /* required for usb32 quirk */ |
| 41 | #define OHCI_CTRL_HCFS (3 << 6) |
| 42 | |
