Age Message
5 years 8 months pinctrl: JZ4770: Added a pinctrl driver for the JZ4770 SoC

This is a squashed version of development done in the jz-3.12 branch.

Changes in 3.18 migration:
- moved into ingenic/ subdir
- renamed .enable to .set_mux
6 years 11 months devicetree stuff
6 years 11 months MIPS: jz4740: Use common clock framework

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
6 years 11 months ASoC: jz4740-i2s: Add device tree support

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
6 years 11 months pwm: jz4740: Add dt bindings

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
6 years 11 months mmc: jz4740: Add devicetree support

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
6 years 11 months mmc: jz4740: Use a regulator for power control

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Apelete Seketeli <apelete@seketeli.net>
6 years 11 months ASoC: jz4740-codec: Add device tree support

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
6 years 11 months drivers/rtc/rtc-jz4740.c: jz4740: Add device tree support

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
9 years 7 months Add defconfig for the Dingoo A320

This is the config from the jz-3.5 branch brought up to date for 3.6.
8 years 10 months OpenDingux: Add initrd

The initrd contents are specified using initrd/tree.txt. The gen_init_cpio
tool will parse that text file and generate a cpio archive.

splashkill is a simple program that is meant to be launched directly by the
kernel, before mininit. It forks itself and sleeps until the ENTER key is
pressed; when it occurs, it enables the framebuffer console by writting to
a file in /sys. This permits to 'kill' the kernel splash screen, in order
to display the boot log.

The source for the mininit and splashkill binaries can be found here:
https://github.com/Ayla-/mininit
8 years 2 months OpenDingux: Add logo

We have a full-screen logo that is used as a splash screen.
9 years 21 days MIPS: A320: Add Dingoo A320 board support

This is a squashed version of the development done in the jz-3.5 branch.
8 years 8 months MIPS: A320: Add SoC sound support for Dingoo A320
7 years 9 months MIPS: JZ4740: Work around fbcon logo crash with SLCD

The logo data is in the init section. However, when using the SLCD driver,
the fbcon code will try to fetch the logo data after the init section has
already been freed, potentially crashing the kernel.

This is a workaround because we have to release a stable kernel now.
The root cause should be found and fixed later.
8 years 10 months MIPS: JZ4740: SLCD framebufer driver

This driver sends the frame buffer to a smart LCD controller,
that is a controller with its own video memory.
It is a squashed version of development done in the jz-3.5 branch.
8 years 9 months MMC: JZ4740: Added support for CPU frequency changing

The MSC device clock is stopped before the frequency change.
After the change a new divider is computed and the clock is restarted.
Also the frequency change is postponed if an I/O operation is in progress.
9 years 21 days MIPS: JZ4740: Add cpufreq support

This is a squashed version of Uli's driver that was further developed
in the qi-kernel repository.
9 years 7 months MIPS: JZ4740: Added setting of PLL rate and main dividers

This functionality makes a cpufreq driver possible.
Squashed version of the development done in the jz-2.6.39 branch.
9 years 5 months qi_lb60: Don't use 3-wire spi mode for the display for now

The spi_gpio driver does not support 3-wire mode.
9 years 8 months Add ili8960 lcd driver

Includes the following changes from the jz-3.5 branch:
- Use module_spi_driver
- Use devm_kzalloc
- Use kstrtoul

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
7 years 11 months MIPS: Removed declaration of obsolete arch_init_clk_ops()
7 years 11 months MIPS: JZ4740: LCD: Fixed LCD_CMD consts and completed LCD_STATE consts

None of these constants are used so far.
7 years 6 months RTC: JZ4740: Init the "regulator" register on startup.

This register controls the accuracy of the RTC. uC/OS-II use
the RTC as a 100Hz clock, and writes a completely wrong value
on that register, that we have to overwrite if we want a working
real-time clock.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
7 years 9 months ASoC: JZ4740: delay activation of the DAC to work around a sound bug.

A proper fix of that bug would require a big rewrite of the driver,
which (I hope) will be done eventually.


interactive