Date:2011-07-08 14:05:25 (9 years 4 months ago)
Author:Maarten ter Huurne
Commit:ec7cab4cbb721bff91ec924ec691efd8daf36579
Message:MIPS: JZ4740: A320: Updated quickstart documentation.

Mention the new ILI9338.
Removed the instructions to change the kernel command line for 64 MB RAM
on A330, since that is autodetected now if the 64 MB boot loader is used.
Files: README-A320 (1 diff)

Change Details

README-A320
3838Alternatively, you can pass "ARCH=mips" to every "make" command.
3939
4040Use "make a320_defconfig" for a default configuration.
41After that, you can modify the kernel configuration using "make menuconfig".
4142
42If your A320 is one of the older models, you must change the LCD driver
43to ILI9325: (the default config uses ILI9331)
43There are three different LCD controllers used in the Dingoo A320 over time:
44until mid-2009 the ILI9325 was used, from then until mid-2011 the ILI9331 was
45used and after that the ILI9338 was used. The default config uses ILI9331;
46if your Dingoo has a different LCD controller you should change the config:
4447
4548    Device drivers
4649    |---Graphics support
4750        |---Support for framebuffer devices
4851            |---SLCD panel
4952
50If you have an A330, keep the ILI9331 setting. If you want to use the full
5164 MB of RAM, you need a new boot loader:
53If you have a Dingoo A330, keep the ILI9331 setting. If you want to use the
54full 64 MB of RAM, you need a new boot loader:
5255  http://boards.dingoonity.org/dingux-releases/(release)-64mb-dingux-for-a330
53Also, you should tell Linux that there is 64 MB present:
54
55    Kernel hacking
56    |---Built-in kernel command line
57        (... mem=64M)
58
59You can modify the kernel configuration using "make menuconfig".
6056
6157To build the kernel, use "make vmlinuz.bin". It will produce the kernel
6258binary named "vmlinuz.bin" in the top-level directory. The current u-boot

Archive Download the corresponding diff file



interactive