Root/
1 | /* |
2 | * This file is part of UBIFS. |
3 | * |
4 | * Copyright (C) 2006-2008 Nokia Corporation. |
5 | * |
6 | * This program is free software; you can redistribute it and/or modify it |
7 | * under the terms of the GNU General Public License version 2 as published by |
8 | * the Free Software Foundation. |
9 | * |
10 | * This program is distributed in the hope that it will be useful, but WITHOUT |
11 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
12 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
13 | * more details. |
14 | * |
15 | * You should have received a copy of the GNU General Public License along with |
16 | * this program; if not, write to the Free Software Foundation, Inc., 51 |
17 | * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
18 | * |
19 | * Authors: Artem Bityutskiy (Битюцкий Артём) |
20 | * Adrian Hunter |
21 | */ |
22 | |
23 | /* |
24 | * This file implements UBIFS journal. |
25 | * |
26 | * The journal consists of 2 parts - the log and bud LEBs. The log has fixed |
27 | * length and position, while a bud logical eraseblock is any LEB in the main |
28 | * area. Buds contain file system data - data nodes, inode nodes, etc. The log |
29 | * contains only references to buds and some other stuff like commit |
30 | * start node. The idea is that when we commit the journal, we do |
31 | * not copy the data, the buds just become indexed. Since after the commit the |
32 | * nodes in bud eraseblocks become leaf nodes of the file system index tree, we |
33 | * use term "bud". Analogy is obvious, bud eraseblocks contain nodes which will |
34 | * become leafs in the future. |
35 | * |
36 | * The journal is multi-headed because we want to write data to the journal as |
37 | * optimally as possible. It is nice to have nodes belonging to the same inode |
38 | * in one LEB, so we may write data owned by different inodes to different |
39 | * journal heads, although at present only one data head is used. |
40 | * |
41 | * For recovery reasons, the base head contains all inode nodes, all directory |
42 | * entry nodes and all truncate nodes. This means that the other heads contain |
43 | * only data nodes. |
44 | * |
45 | * Bud LEBs may be half-indexed. For example, if the bud was not full at the |
46 | * time of commit, the bud is retained to continue to be used in the journal, |
47 | * even though the "front" of the LEB is now indexed. In that case, the log |
48 | * reference contains the offset where the bud starts for the purposes of the |
49 | * journal. |
50 | * |
51 | * The journal size has to be limited, because the larger is the journal, the |
52 | * longer it takes to mount UBIFS (scanning the journal) and the more memory it |
53 | * takes (indexing in the TNC). |
54 | * |
55 | * All the journal write operations like 'ubifs_jnl_update()' here, which write |
56 | * multiple UBIFS nodes to the journal at one go, are atomic with respect to |
57 | * unclean reboots. Should the unclean reboot happen, the recovery code drops |
58 | * all the nodes. |
59 | */ |
60 | |
61 | #include "ubifs.h" |
62 | |
63 | /** |
64 | * zero_ino_node_unused - zero out unused fields of an on-flash inode node. |
65 | * @ino: the inode to zero out |
66 | */ |
67 | static inline void zero_ino_node_unused(struct ubifs_ino_node *ino) |
68 | { |
69 | memset(ino->padding1, 0, 4); |
70 | memset(ino->padding2, 0, 26); |
71 | } |
72 | |
73 | /** |
74 | * zero_dent_node_unused - zero out unused fields of an on-flash directory |
75 | * entry node. |
76 | * @dent: the directory entry to zero out |
77 | */ |
78 | static inline void zero_dent_node_unused(struct ubifs_dent_node *dent) |
79 | { |
80 | dent->padding1 = 0; |
81 | memset(dent->padding2, 0, 4); |
82 | } |
83 | |
84 | /** |
85 | * zero_data_node_unused - zero out unused fields of an on-flash data node. |
86 | * @data: the data node to zero out |
87 | */ |
88 | static inline void zero_data_node_unused(struct ubifs_data_node *data) |
89 | { |
90 | memset(data->padding, 0, 2); |
91 | } |
92 | |
93 | /** |
94 | * zero_trun_node_unused - zero out unused fields of an on-flash truncation |
95 | * node. |
96 | * @trun: the truncation node to zero out |
97 | */ |
98 | static inline void zero_trun_node_unused(struct ubifs_trun_node *trun) |
99 | { |
100 | memset(trun->padding, 0, 12); |
101 | } |
102 | |
103 | /** |
104 | * reserve_space - reserve space in the journal. |
105 | * @c: UBIFS file-system description object |
106 | * @jhead: journal head number |
107 | * @len: node length |
108 | * |
109 | * This function reserves space in journal head @head. If the reservation |
110 | * succeeded, the journal head stays locked and later has to be unlocked using |
111 | * 'release_head()'. 'write_node()' and 'write_head()' functions also unlock |
112 | * it. Returns zero in case of success, %-EAGAIN if commit has to be done, and |
113 | * other negative error codes in case of other failures. |
114 | */ |
115 | static int reserve_space(struct ubifs_info *c, int jhead, int len) |
116 | { |
117 | int err = 0, err1, retries = 0, avail, lnum, offs, squeeze; |
118 | struct ubifs_wbuf *wbuf = &c->jheads[jhead].wbuf; |
119 | |
120 | /* |
121 | * Typically, the base head has smaller nodes written to it, so it is |
122 | * better to try to allocate space at the ends of eraseblocks. This is |
123 | * what the squeeze parameter does. |
124 | */ |
125 | squeeze = (jhead == BASEHD); |
126 | again: |
127 | mutex_lock_nested(&wbuf->io_mutex, wbuf->jhead); |
128 | |
129 | if (c->ro_media) { |
130 | err = -EROFS; |
131 | goto out_unlock; |
132 | } |
133 | |
134 | avail = c->leb_size - wbuf->offs - wbuf->used; |
135 | if (wbuf->lnum != -1 && avail >= len) |
136 | return 0; |
137 | |
138 | /* |
139 | * Write buffer wasn't seek'ed or there is no enough space - look for an |
140 | * LEB with some empty space. |
141 | */ |
142 | lnum = ubifs_find_free_space(c, len, &offs, squeeze); |
143 | if (lnum >= 0) { |
144 | /* Found an LEB, add it to the journal head */ |
145 | err = ubifs_add_bud_to_log(c, jhead, lnum, offs); |
146 | if (err) |
147 | goto out_return; |
148 | /* A new bud was successfully allocated and added to the log */ |
149 | goto out; |
150 | } |
151 | |
152 | err = lnum; |
153 | if (err != -ENOSPC) |
154 | goto out_unlock; |
155 | |
156 | /* |
157 | * No free space, we have to run garbage collector to make |
158 | * some. But the write-buffer mutex has to be unlocked because |
159 | * GC also takes it. |
160 | */ |
161 | dbg_jnl("no free space jhead %d, run GC", jhead); |
162 | mutex_unlock(&wbuf->io_mutex); |
163 | |
164 | lnum = ubifs_garbage_collect(c, 0); |
165 | if (lnum < 0) { |
166 | err = lnum; |
167 | if (err != -ENOSPC) |
168 | return err; |
169 | |
170 | /* |
171 | * GC could not make a free LEB. But someone else may |
172 | * have allocated new bud for this journal head, |
173 | * because we dropped @wbuf->io_mutex, so try once |
174 | * again. |
175 | */ |
176 | dbg_jnl("GC couldn't make a free LEB for jhead %d", jhead); |
177 | if (retries++ < 2) { |
178 | dbg_jnl("retry (%d)", retries); |
179 | goto again; |
180 | } |
181 | |
182 | dbg_jnl("return -ENOSPC"); |
183 | return err; |
184 | } |
185 | |
186 | mutex_lock_nested(&wbuf->io_mutex, wbuf->jhead); |
187 | dbg_jnl("got LEB %d for jhead %d", lnum, jhead); |
188 | avail = c->leb_size - wbuf->offs - wbuf->used; |
189 | |
190 | if (wbuf->lnum != -1 && avail >= len) { |
191 | /* |
192 | * Someone else has switched the journal head and we have |
193 | * enough space now. This happens when more than one process is |
194 | * trying to write to the same journal head at the same time. |
195 | */ |
196 | dbg_jnl("return LEB %d back, already have LEB %d:%d", |
197 | lnum, wbuf->lnum, wbuf->offs + wbuf->used); |
198 | err = ubifs_return_leb(c, lnum); |
199 | if (err) |
200 | goto out_unlock; |
201 | return 0; |
202 | } |
203 | |
204 | err = ubifs_add_bud_to_log(c, jhead, lnum, 0); |
205 | if (err) |
206 | goto out_return; |
207 | offs = 0; |
208 | |
209 | out: |
210 | err = ubifs_wbuf_seek_nolock(wbuf, lnum, offs, wbuf->dtype); |
211 | if (err) |
212 | goto out_unlock; |
213 | |
214 | return 0; |
215 | |
216 | out_unlock: |
217 | mutex_unlock(&wbuf->io_mutex); |
218 | return err; |
219 | |
220 | out_return: |
221 | /* An error occurred and the LEB has to be returned to lprops */ |
222 | ubifs_assert(err < 0); |
223 | err1 = ubifs_return_leb(c, lnum); |
224 | if (err1 && err == -EAGAIN) |
225 | /* |
226 | * Return original error code only if it is not %-EAGAIN, |
227 | * which is not really an error. Otherwise, return the error |
228 | * code of 'ubifs_return_leb()'. |
229 | */ |
230 | err = err1; |
231 | mutex_unlock(&wbuf->io_mutex); |
232 | return err; |
233 | } |
234 | |
235 | /** |
236 | * write_node - write node to a journal head. |
237 | * @c: UBIFS file-system description object |
238 | * @jhead: journal head |
239 | * @node: node to write |
240 | * @len: node length |
241 | * @lnum: LEB number written is returned here |
242 | * @offs: offset written is returned here |
243 | * |
244 | * This function writes a node to reserved space of journal head @jhead. |
245 | * Returns zero in case of success and a negative error code in case of |
246 | * failure. |
247 | */ |
248 | static int write_node(struct ubifs_info *c, int jhead, void *node, int len, |
249 | int *lnum, int *offs) |
250 | { |
251 | struct ubifs_wbuf *wbuf = &c->jheads[jhead].wbuf; |
252 | |
253 | ubifs_assert(jhead != GCHD); |
254 | |
255 | *lnum = c->jheads[jhead].wbuf.lnum; |
256 | *offs = c->jheads[jhead].wbuf.offs + c->jheads[jhead].wbuf.used; |
257 | |
258 | dbg_jnl("jhead %d, LEB %d:%d, len %d", jhead, *lnum, *offs, len); |
259 | ubifs_prepare_node(c, node, len, 0); |
260 | |
261 | return ubifs_wbuf_write_nolock(wbuf, node, len); |
262 | } |
263 | |
264 | /** |
265 | * write_head - write data to a journal head. |
266 | * @c: UBIFS file-system description object |
267 | * @jhead: journal head |
268 | * @buf: buffer to write |
269 | * @len: length to write |
270 | * @lnum: LEB number written is returned here |
271 | * @offs: offset written is returned here |
272 | * @sync: non-zero if the write-buffer has to by synchronized |
273 | * |
274 | * This function is the same as 'write_node()' but it does not assume the |
275 | * buffer it is writing is a node, so it does not prepare it (which means |
276 | * initializing common header and calculating CRC). |
277 | */ |
278 | static int write_head(struct ubifs_info *c, int jhead, void *buf, int len, |
279 | int *lnum, int *offs, int sync) |
280 | { |
281 | int err; |
282 | struct ubifs_wbuf *wbuf = &c->jheads[jhead].wbuf; |
283 | |
284 | ubifs_assert(jhead != GCHD); |
285 | |
286 | *lnum = c->jheads[jhead].wbuf.lnum; |
287 | *offs = c->jheads[jhead].wbuf.offs + c->jheads[jhead].wbuf.used; |
288 | dbg_jnl("jhead %d, LEB %d:%d, len %d", jhead, *lnum, *offs, len); |
289 | |
290 | err = ubifs_wbuf_write_nolock(wbuf, buf, len); |
291 | if (err) |
292 | return err; |
293 | if (sync) |
294 | err = ubifs_wbuf_sync_nolock(wbuf); |
295 | return err; |
296 | } |
297 | |
298 | /** |
299 | * make_reservation - reserve journal space. |
300 | * @c: UBIFS file-system description object |
301 | * @jhead: journal head |
302 | * @len: how many bytes to reserve |
303 | * |
304 | * This function makes space reservation in journal head @jhead. The function |
305 | * takes the commit lock and locks the journal head, and the caller has to |
306 | * unlock the head and finish the reservation with 'finish_reservation()'. |
307 | * Returns zero in case of success and a negative error code in case of |
308 | * failure. |
309 | * |
310 | * Note, the journal head may be unlocked as soon as the data is written, while |
311 | * the commit lock has to be released after the data has been added to the |
312 | * TNC. |
313 | */ |
314 | static int make_reservation(struct ubifs_info *c, int jhead, int len) |
315 | { |
316 | int err, cmt_retries = 0, nospc_retries = 0; |
317 | |
318 | again: |
319 | down_read(&c->commit_sem); |
320 | err = reserve_space(c, jhead, len); |
321 | if (!err) |
322 | return 0; |
323 | up_read(&c->commit_sem); |
324 | |
325 | if (err == -ENOSPC) { |
326 | /* |
327 | * GC could not make any progress. We should try to commit |
328 | * once because it could make some dirty space and GC would |
329 | * make progress, so make the error -EAGAIN so that the below |
330 | * will commit and re-try. |
331 | */ |
332 | if (nospc_retries++ < 2) { |
333 | dbg_jnl("no space, retry"); |
334 | err = -EAGAIN; |
335 | } |
336 | |
337 | /* |
338 | * This means that the budgeting is incorrect. We always have |
339 | * to be able to write to the media, because all operations are |
340 | * budgeted. Deletions are not budgeted, though, but we reserve |
341 | * an extra LEB for them. |
342 | */ |
343 | } |
344 | |
345 | if (err != -EAGAIN) |
346 | goto out; |
347 | |
348 | /* |
349 | * -EAGAIN means that the journal is full or too large, or the above |
350 | * code wants to do one commit. Do this and re-try. |
351 | */ |
352 | if (cmt_retries > 128) { |
353 | /* |
354 | * This should not happen unless the journal size limitations |
355 | * are too tough. |
356 | */ |
357 | ubifs_err("stuck in space allocation"); |
358 | err = -ENOSPC; |
359 | goto out; |
360 | } else if (cmt_retries > 32) |
361 | ubifs_warn("too many space allocation re-tries (%d)", |
362 | cmt_retries); |
363 | |
364 | dbg_jnl("-EAGAIN, commit and retry (retried %d times)", |
365 | cmt_retries); |
366 | cmt_retries += 1; |
367 | |
368 | err = ubifs_run_commit(c); |
369 | if (err) |
370 | return err; |
371 | goto again; |
372 | |
373 | out: |
374 | ubifs_err("cannot reserve %d bytes in jhead %d, error %d", |
375 | len, jhead, err); |
376 | if (err == -ENOSPC) { |
377 | /* This are some budgeting problems, print useful information */ |
378 | down_write(&c->commit_sem); |
379 | spin_lock(&c->space_lock); |
380 | dbg_dump_stack(); |
381 | dbg_dump_budg(c); |
382 | spin_unlock(&c->space_lock); |
383 | dbg_dump_lprops(c); |
384 | cmt_retries = dbg_check_lprops(c); |
385 | up_write(&c->commit_sem); |
386 | } |
387 | return err; |
388 | } |
389 | |
390 | /** |
391 | * release_head - release a journal head. |
392 | * @c: UBIFS file-system description object |
393 | * @jhead: journal head |
394 | * |
395 | * This function releases journal head @jhead which was locked by |
396 | * the 'make_reservation()' function. It has to be called after each successful |
397 | * 'make_reservation()' invocation. |
398 | */ |
399 | static inline void release_head(struct ubifs_info *c, int jhead) |
400 | { |
401 | mutex_unlock(&c->jheads[jhead].wbuf.io_mutex); |
402 | } |
403 | |
404 | /** |
405 | * finish_reservation - finish a reservation. |
406 | * @c: UBIFS file-system description object |
407 | * |
408 | * This function finishes journal space reservation. It must be called after |
409 | * 'make_reservation()'. |
410 | */ |
411 | static void finish_reservation(struct ubifs_info *c) |
412 | { |
413 | up_read(&c->commit_sem); |
414 | } |
415 | |
416 | /** |
417 | * get_dent_type - translate VFS inode mode to UBIFS directory entry type. |
418 | * @mode: inode mode |
419 | */ |
420 | static int get_dent_type(int mode) |
421 | { |
422 | switch (mode & S_IFMT) { |
423 | case S_IFREG: |
424 | return UBIFS_ITYPE_REG; |
425 | case S_IFDIR: |
426 | return UBIFS_ITYPE_DIR; |
427 | case S_IFLNK: |
428 | return UBIFS_ITYPE_LNK; |
429 | case S_IFBLK: |
430 | return UBIFS_ITYPE_BLK; |
431 | case S_IFCHR: |
432 | return UBIFS_ITYPE_CHR; |
433 | case S_IFIFO: |
434 | return UBIFS_ITYPE_FIFO; |
435 | case S_IFSOCK: |
436 | return UBIFS_ITYPE_SOCK; |
437 | default: |
438 | BUG(); |
439 | } |
440 | return 0; |
441 | } |
442 | |
443 | /** |
444 | * pack_inode - pack an inode node. |
445 | * @c: UBIFS file-system description object |
446 | * @ino: buffer in which to pack inode node |
447 | * @inode: inode to pack |
448 | * @last: indicates the last node of the group |
449 | */ |
450 | static void pack_inode(struct ubifs_info *c, struct ubifs_ino_node *ino, |
451 | const struct inode *inode, int last) |
452 | { |
453 | int data_len = 0, last_reference = !inode->i_nlink; |
454 | struct ubifs_inode *ui = ubifs_inode(inode); |
455 | |
456 | ino->ch.node_type = UBIFS_INO_NODE; |
457 | ino_key_init_flash(c, &ino->key, inode->i_ino); |
458 | ino->creat_sqnum = cpu_to_le64(ui->creat_sqnum); |
459 | ino->atime_sec = cpu_to_le64(inode->i_atime.tv_sec); |
460 | ino->atime_nsec = cpu_to_le32(inode->i_atime.tv_nsec); |
461 | ino->ctime_sec = cpu_to_le64(inode->i_ctime.tv_sec); |
462 | ino->ctime_nsec = cpu_to_le32(inode->i_ctime.tv_nsec); |
463 | ino->mtime_sec = cpu_to_le64(inode->i_mtime.tv_sec); |
464 | ino->mtime_nsec = cpu_to_le32(inode->i_mtime.tv_nsec); |
465 | ino->uid = cpu_to_le32(inode->i_uid); |
466 | ino->gid = cpu_to_le32(inode->i_gid); |
467 | ino->mode = cpu_to_le32(inode->i_mode); |
468 | ino->flags = cpu_to_le32(ui->flags); |
469 | ino->size = cpu_to_le64(ui->ui_size); |
470 | ino->nlink = cpu_to_le32(inode->i_nlink); |
471 | ino->compr_type = cpu_to_le16(ui->compr_type); |
472 | ino->data_len = cpu_to_le32(ui->data_len); |
473 | ino->xattr_cnt = cpu_to_le32(ui->xattr_cnt); |
474 | ino->xattr_size = cpu_to_le32(ui->xattr_size); |
475 | ino->xattr_names = cpu_to_le32(ui->xattr_names); |
476 | zero_ino_node_unused(ino); |
477 | |
478 | /* |
479 | * Drop the attached data if this is a deletion inode, the data is not |
480 | * needed anymore. |
481 | */ |
482 | if (!last_reference) { |
483 | memcpy(ino->data, ui->data, ui->data_len); |
484 | data_len = ui->data_len; |
485 | } |
486 | |
487 | ubifs_prep_grp_node(c, ino, UBIFS_INO_NODE_SZ + data_len, last); |
488 | } |
489 | |
490 | /** |
491 | * mark_inode_clean - mark UBIFS inode as clean. |
492 | * @c: UBIFS file-system description object |
493 | * @ui: UBIFS inode to mark as clean |
494 | * |
495 | * This helper function marks UBIFS inode @ui as clean by cleaning the |
496 | * @ui->dirty flag and releasing its budget. Note, VFS may still treat the |
497 | * inode as dirty and try to write it back, but 'ubifs_write_inode()' would |
498 | * just do nothing. |
499 | */ |
500 | static void mark_inode_clean(struct ubifs_info *c, struct ubifs_inode *ui) |
501 | { |
502 | if (ui->dirty) |
503 | ubifs_release_dirty_inode_budget(c, ui); |
504 | ui->dirty = 0; |
505 | } |
506 | |
507 | /** |
508 | * ubifs_jnl_update - update inode. |
509 | * @c: UBIFS file-system description object |
510 | * @dir: parent inode or host inode in case of extended attributes |
511 | * @nm: directory entry name |
512 | * @inode: inode to update |
513 | * @deletion: indicates a directory entry deletion i.e unlink or rmdir |
514 | * @xent: non-zero if the directory entry is an extended attribute entry |
515 | * |
516 | * This function updates an inode by writing a directory entry (or extended |
517 | * attribute entry), the inode itself, and the parent directory inode (or the |
518 | * host inode) to the journal. |
519 | * |
520 | * The function writes the host inode @dir last, which is important in case of |
521 | * extended attributes. Indeed, then we guarantee that if the host inode gets |
522 | * synchronized (with 'fsync()'), and the write-buffer it sits in gets flushed, |
523 | * the extended attribute inode gets flushed too. And this is exactly what the |
524 | * user expects - synchronizing the host inode synchronizes its extended |
525 | * attributes. Similarly, this guarantees that if @dir is synchronized, its |
526 | * directory entry corresponding to @nm gets synchronized too. |
527 | * |
528 | * If the inode (@inode) or the parent directory (@dir) are synchronous, this |
529 | * function synchronizes the write-buffer. |
530 | * |
531 | * This function marks the @dir and @inode inodes as clean and returns zero on |
532 | * success. In case of failure, a negative error code is returned. |
533 | */ |
534 | int ubifs_jnl_update(struct ubifs_info *c, const struct inode *dir, |
535 | const struct qstr *nm, const struct inode *inode, |
536 | int deletion, int xent) |
537 | { |
538 | int err, dlen, ilen, len, lnum, ino_offs, dent_offs; |
539 | int aligned_dlen, aligned_ilen, sync = IS_DIRSYNC(dir); |
540 | int last_reference = !!(deletion && inode->i_nlink == 0); |
541 | struct ubifs_inode *ui = ubifs_inode(inode); |
542 | struct ubifs_inode *dir_ui = ubifs_inode(dir); |
543 | struct ubifs_dent_node *dent; |
544 | struct ubifs_ino_node *ino; |
545 | union ubifs_key dent_key, ino_key; |
546 | |
547 | dbg_jnl("ino %lu, dent '%.*s', data len %d in dir ino %lu", |
548 | inode->i_ino, nm->len, nm->name, ui->data_len, dir->i_ino); |
549 | ubifs_assert(dir_ui->data_len == 0); |
550 | ubifs_assert(mutex_is_locked(&dir_ui->ui_mutex)); |
551 | |
552 | dlen = UBIFS_DENT_NODE_SZ + nm->len + 1; |
553 | ilen = UBIFS_INO_NODE_SZ; |
554 | |
555 | /* |
556 | * If the last reference to the inode is being deleted, then there is |
557 | * no need to attach and write inode data, it is being deleted anyway. |
558 | * And if the inode is being deleted, no need to synchronize |
559 | * write-buffer even if the inode is synchronous. |
560 | */ |
561 | if (!last_reference) { |
562 | ilen += ui->data_len; |
563 | sync |= IS_SYNC(inode); |
564 | } |
565 | |
566 | aligned_dlen = ALIGN(dlen, 8); |
567 | aligned_ilen = ALIGN(ilen, 8); |
568 | len = aligned_dlen + aligned_ilen + UBIFS_INO_NODE_SZ; |
569 | dent = kmalloc(len, GFP_NOFS); |
570 | if (!dent) |
571 | return -ENOMEM; |
572 | |
573 | /* Make reservation before allocating sequence numbers */ |
574 | err = make_reservation(c, BASEHD, len); |
575 | if (err) |
576 | goto out_free; |
577 | |
578 | if (!xent) { |
579 | dent->ch.node_type = UBIFS_DENT_NODE; |
580 | dent_key_init(c, &dent_key, dir->i_ino, nm); |
581 | } else { |
582 | dent->ch.node_type = UBIFS_XENT_NODE; |
583 | xent_key_init(c, &dent_key, dir->i_ino, nm); |
584 | } |
585 | |
586 | key_write(c, &dent_key, dent->key); |
587 | dent->inum = deletion ? 0 : cpu_to_le64(inode->i_ino); |
588 | dent->type = get_dent_type(inode->i_mode); |
589 | dent->nlen = cpu_to_le16(nm->len); |
590 | memcpy(dent->name, nm->name, nm->len); |
591 | dent->name[nm->len] = '\0'; |
592 | zero_dent_node_unused(dent); |
593 | ubifs_prep_grp_node(c, dent, dlen, 0); |
594 | |
595 | ino = (void *)dent + aligned_dlen; |
596 | pack_inode(c, ino, inode, 0); |
597 | ino = (void *)ino + aligned_ilen; |
598 | pack_inode(c, ino, dir, 1); |
599 | |
600 | if (last_reference) { |
601 | err = ubifs_add_orphan(c, inode->i_ino); |
602 | if (err) { |
603 | release_head(c, BASEHD); |
604 | goto out_finish; |
605 | } |
606 | ui->del_cmtno = c->cmt_no; |
607 | } |
608 | |
609 | err = write_head(c, BASEHD, dent, len, &lnum, &dent_offs, sync); |
610 | if (err) |
611 | goto out_release; |
612 | if (!sync) { |
613 | struct ubifs_wbuf *wbuf = &c->jheads[BASEHD].wbuf; |
614 | |
615 | ubifs_wbuf_add_ino_nolock(wbuf, inode->i_ino); |
616 | ubifs_wbuf_add_ino_nolock(wbuf, dir->i_ino); |
617 | } |
618 | release_head(c, BASEHD); |
619 | kfree(dent); |
620 | |
621 | if (deletion) { |
622 | err = ubifs_tnc_remove_nm(c, &dent_key, nm); |
623 | if (err) |
624 | goto out_ro; |
625 | err = ubifs_add_dirt(c, lnum, dlen); |
626 | } else |
627 | err = ubifs_tnc_add_nm(c, &dent_key, lnum, dent_offs, dlen, nm); |
628 | if (err) |
629 | goto out_ro; |
630 | |
631 | /* |
632 | * Note, we do not remove the inode from TNC even if the last reference |
633 | * to it has just been deleted, because the inode may still be opened. |
634 | * Instead, the inode has been added to orphan lists and the orphan |
635 | * subsystem will take further care about it. |
636 | */ |
637 | ino_key_init(c, &ino_key, inode->i_ino); |
638 | ino_offs = dent_offs + aligned_dlen; |
639 | err = ubifs_tnc_add(c, &ino_key, lnum, ino_offs, ilen); |
640 | if (err) |
641 | goto out_ro; |
642 | |
643 | ino_key_init(c, &ino_key, dir->i_ino); |
644 | ino_offs += aligned_ilen; |
645 | err = ubifs_tnc_add(c, &ino_key, lnum, ino_offs, UBIFS_INO_NODE_SZ); |
646 | if (err) |
647 | goto out_ro; |
648 | |
649 | finish_reservation(c); |
650 | spin_lock(&ui->ui_lock); |
651 | ui->synced_i_size = ui->ui_size; |
652 | spin_unlock(&ui->ui_lock); |
653 | mark_inode_clean(c, ui); |
654 | mark_inode_clean(c, dir_ui); |
655 | return 0; |
656 | |
657 | out_finish: |
658 | finish_reservation(c); |
659 | out_free: |
660 | kfree(dent); |
661 | return err; |
662 | |
663 | out_release: |
664 | release_head(c, BASEHD); |
665 | out_ro: |
666 | ubifs_ro_mode(c, err); |
667 | if (last_reference) |
668 | ubifs_delete_orphan(c, inode->i_ino); |
669 | finish_reservation(c); |
670 | return err; |
671 | } |
672 | |
673 | /** |
674 | * ubifs_jnl_write_data - write a data node to the journal. |
675 | * @c: UBIFS file-system description object |
676 | * @inode: inode the data node belongs to |
677 | * @key: node key |
678 | * @buf: buffer to write |
679 | * @len: data length (must not exceed %UBIFS_BLOCK_SIZE) |
680 | * |
681 | * This function writes a data node to the journal. Returns %0 if the data node |
682 | * was successfully written, and a negative error code in case of failure. |
683 | */ |
684 | int ubifs_jnl_write_data(struct ubifs_info *c, const struct inode *inode, |
685 | const union ubifs_key *key, const void *buf, int len) |
686 | { |
687 | struct ubifs_data_node *data; |
688 | int err, lnum, offs, compr_type, out_len; |
689 | int dlen = UBIFS_DATA_NODE_SZ + UBIFS_BLOCK_SIZE * WORST_COMPR_FACTOR; |
690 | struct ubifs_inode *ui = ubifs_inode(inode); |
691 | |
692 | dbg_jnl("ino %lu, blk %u, len %d, key %s", |
693 | (unsigned long)key_inum(c, key), key_block(c, key), len, |
694 | DBGKEY(key)); |
695 | ubifs_assert(len <= UBIFS_BLOCK_SIZE); |
696 | |
697 | data = kmalloc(dlen, GFP_NOFS); |
698 | if (!data) |
699 | return -ENOMEM; |
700 | |
701 | data->ch.node_type = UBIFS_DATA_NODE; |
702 | key_write(c, key, &data->key); |
703 | data->size = cpu_to_le32(len); |
704 | zero_data_node_unused(data); |
705 | |
706 | if (!(ui->flags & UBIFS_COMPR_FL)) |
707 | /* Compression is disabled for this inode */ |
708 | compr_type = UBIFS_COMPR_NONE; |
709 | else |
710 | compr_type = ui->compr_type; |
711 | |
712 | out_len = dlen - UBIFS_DATA_NODE_SZ; |
713 | ubifs_compress(buf, len, &data->data, &out_len, &compr_type); |
714 | ubifs_assert(out_len <= UBIFS_BLOCK_SIZE); |
715 | |
716 | dlen = UBIFS_DATA_NODE_SZ + out_len; |
717 | data->compr_type = cpu_to_le16(compr_type); |
718 | |
719 | /* Make reservation before allocating sequence numbers */ |
720 | err = make_reservation(c, DATAHD, dlen); |
721 | if (err) |
722 | goto out_free; |
723 | |
724 | err = write_node(c, DATAHD, data, dlen, &lnum, &offs); |
725 | if (err) |
726 | goto out_release; |
727 | ubifs_wbuf_add_ino_nolock(&c->jheads[DATAHD].wbuf, key_inum(c, key)); |
728 | release_head(c, DATAHD); |
729 | |
730 | err = ubifs_tnc_add(c, key, lnum, offs, dlen); |
731 | if (err) |
732 | goto out_ro; |
733 | |
734 | finish_reservation(c); |
735 | kfree(data); |
736 | return 0; |
737 | |
738 | out_release: |
739 | release_head(c, DATAHD); |
740 | out_ro: |
741 | ubifs_ro_mode(c, err); |
742 | finish_reservation(c); |
743 | out_free: |
744 | kfree(data); |
745 | return err; |
746 | } |
747 | |
748 | /** |
749 | * ubifs_jnl_write_inode - flush inode to the journal. |
750 | * @c: UBIFS file-system description object |
751 | * @inode: inode to flush |
752 | * |
753 | * This function writes inode @inode to the journal. If the inode is |
754 | * synchronous, it also synchronizes the write-buffer. Returns zero in case of |
755 | * success and a negative error code in case of failure. |
756 | */ |
757 | int ubifs_jnl_write_inode(struct ubifs_info *c, const struct inode *inode) |
758 | { |
759 | int err, lnum, offs; |
760 | struct ubifs_ino_node *ino; |
761 | struct ubifs_inode *ui = ubifs_inode(inode); |
762 | int sync = 0, len = UBIFS_INO_NODE_SZ, last_reference = !inode->i_nlink; |
763 | |
764 | dbg_jnl("ino %lu, nlink %u", inode->i_ino, inode->i_nlink); |
765 | |
766 | /* |
767 | * If the inode is being deleted, do not write the attached data. No |
768 | * need to synchronize the write-buffer either. |
769 | */ |
770 | if (!last_reference) { |
771 | len += ui->data_len; |
772 | sync = IS_SYNC(inode); |
773 | } |
774 | ino = kmalloc(len, GFP_NOFS); |
775 | if (!ino) |
776 | return -ENOMEM; |
777 | |
778 | /* Make reservation before allocating sequence numbers */ |
779 | err = make_reservation(c, BASEHD, len); |
780 | if (err) |
781 | goto out_free; |
782 | |
783 | pack_inode(c, ino, inode, 1); |
784 | err = write_head(c, BASEHD, ino, len, &lnum, &offs, sync); |
785 | if (err) |
786 | goto out_release; |
787 | if (!sync) |
788 | ubifs_wbuf_add_ino_nolock(&c->jheads[BASEHD].wbuf, |
789 | inode->i_ino); |
790 | release_head(c, BASEHD); |
791 | |
792 | if (last_reference) { |
793 | err = ubifs_tnc_remove_ino(c, inode->i_ino); |
794 | if (err) |
795 | goto out_ro; |
796 | ubifs_delete_orphan(c, inode->i_ino); |
797 | err = ubifs_add_dirt(c, lnum, len); |
798 | } else { |
799 | union ubifs_key key; |
800 | |
801 | ino_key_init(c, &key, inode->i_ino); |
802 | err = ubifs_tnc_add(c, &key, lnum, offs, len); |
803 | } |
804 | if (err) |
805 | goto out_ro; |
806 | |
807 | finish_reservation(c); |
808 | spin_lock(&ui->ui_lock); |
809 | ui->synced_i_size = ui->ui_size; |
810 | spin_unlock(&ui->ui_lock); |
811 | kfree(ino); |
812 | return 0; |
813 | |
814 | out_release: |
815 | release_head(c, BASEHD); |
816 | out_ro: |
817 | ubifs_ro_mode(c, err); |
818 | finish_reservation(c); |
819 | out_free: |
820 | kfree(ino); |
821 | return err; |
822 | } |
823 | |
824 | /** |
825 | * ubifs_jnl_delete_inode - delete an inode. |
826 | * @c: UBIFS file-system description object |
827 | * @inode: inode to delete |
828 | * |
829 | * This function deletes inode @inode which includes removing it from orphans, |
830 | * deleting it from TNC and, in some cases, writing a deletion inode to the |
831 | * journal. |
832 | * |
833 | * When regular file inodes are unlinked or a directory inode is removed, the |
834 | * 'ubifs_jnl_update()' function writes a corresponding deletion inode and |
835 | * direntry to the media, and adds the inode to orphans. After this, when the |
836 | * last reference to this inode has been dropped, this function is called. In |
837 | * general, it has to write one more deletion inode to the media, because if |
838 | * a commit happened between 'ubifs_jnl_update()' and |
839 | * 'ubifs_jnl_delete_inode()', the deletion inode is not in the journal |
840 | * anymore, and in fact it might not be on the flash anymore, because it might |
841 | * have been garbage-collected already. And for optimization reasons UBIFS does |
842 | * not read the orphan area if it has been unmounted cleanly, so it would have |
843 | * no indication in the journal that there is a deleted inode which has to be |
844 | * removed from TNC. |
845 | * |
846 | * However, if there was no commit between 'ubifs_jnl_update()' and |
847 | * 'ubifs_jnl_delete_inode()', then there is no need to write the deletion |
848 | * inode to the media for the second time. And this is quite a typical case. |
849 | * |
850 | * This function returns zero in case of success and a negative error code in |
851 | * case of failure. |
852 | */ |
853 | int ubifs_jnl_delete_inode(struct ubifs_info *c, const struct inode *inode) |
854 | { |
855 | int err; |
856 | struct ubifs_inode *ui = ubifs_inode(inode); |
857 | |
858 | ubifs_assert(inode->i_nlink == 0); |
859 | |
860 | if (ui->del_cmtno != c->cmt_no) |
861 | /* A commit happened for sure */ |
862 | return ubifs_jnl_write_inode(c, inode); |
863 | |
864 | down_read(&c->commit_sem); |
865 | /* |
866 | * Check commit number again, because the first test has been done |
867 | * without @c->commit_sem, so a commit might have happened. |
868 | */ |
869 | if (ui->del_cmtno != c->cmt_no) { |
870 | up_read(&c->commit_sem); |
871 | return ubifs_jnl_write_inode(c, inode); |
872 | } |
873 | |
874 | err = ubifs_tnc_remove_ino(c, inode->i_ino); |
875 | if (err) |
876 | ubifs_ro_mode(c, err); |
877 | else |
878 | ubifs_delete_orphan(c, inode->i_ino); |
879 | up_read(&c->commit_sem); |
880 | return err; |
881 | } |
882 | |
883 | /** |
884 | * ubifs_jnl_rename - rename a directory entry. |
885 | * @c: UBIFS file-system description object |
886 | * @old_dir: parent inode of directory entry to rename |
887 | * @old_dentry: directory entry to rename |
888 | * @new_dir: parent inode of directory entry to rename |
889 | * @new_dentry: new directory entry (or directory entry to replace) |
890 | * @sync: non-zero if the write-buffer has to be synchronized |
891 | * |
892 | * This function implements the re-name operation which may involve writing up |
893 | * to 3 inodes and 2 directory entries. It marks the written inodes as clean |
894 | * and returns zero on success. In case of failure, a negative error code is |
895 | * returned. |
896 | */ |
897 | int ubifs_jnl_rename(struct ubifs_info *c, const struct inode *old_dir, |
898 | const struct dentry *old_dentry, |
899 | const struct inode *new_dir, |
900 | const struct dentry *new_dentry, int sync) |
901 | { |
902 | void *p; |
903 | union ubifs_key key; |
904 | struct ubifs_dent_node *dent, *dent2; |
905 | int err, dlen1, dlen2, ilen, lnum, offs, len; |
906 | const struct inode *old_inode = old_dentry->d_inode; |
907 | const struct inode *new_inode = new_dentry->d_inode; |
908 | int aligned_dlen1, aligned_dlen2, plen = UBIFS_INO_NODE_SZ; |
909 | int last_reference = !!(new_inode && new_inode->i_nlink == 0); |
910 | int move = (old_dir != new_dir); |
911 | struct ubifs_inode *uninitialized_var(new_ui); |
912 | |
913 | dbg_jnl("dent '%.*s' in dir ino %lu to dent '%.*s' in dir ino %lu", |
914 | old_dentry->d_name.len, old_dentry->d_name.name, |
915 | old_dir->i_ino, new_dentry->d_name.len, |
916 | new_dentry->d_name.name, new_dir->i_ino); |
917 | ubifs_assert(ubifs_inode(old_dir)->data_len == 0); |
918 | ubifs_assert(ubifs_inode(new_dir)->data_len == 0); |
919 | ubifs_assert(mutex_is_locked(&ubifs_inode(old_dir)->ui_mutex)); |
920 | ubifs_assert(mutex_is_locked(&ubifs_inode(new_dir)->ui_mutex)); |
921 | |
922 | dlen1 = UBIFS_DENT_NODE_SZ + new_dentry->d_name.len + 1; |
923 | dlen2 = UBIFS_DENT_NODE_SZ + old_dentry->d_name.len + 1; |
924 | if (new_inode) { |
925 | new_ui = ubifs_inode(new_inode); |
926 | ubifs_assert(mutex_is_locked(&new_ui->ui_mutex)); |
927 | ilen = UBIFS_INO_NODE_SZ; |
928 | if (!last_reference) |
929 | ilen += new_ui->data_len; |
930 | } else |
931 | ilen = 0; |
932 | |
933 | aligned_dlen1 = ALIGN(dlen1, 8); |
934 | aligned_dlen2 = ALIGN(dlen2, 8); |
935 | len = aligned_dlen1 + aligned_dlen2 + ALIGN(ilen, 8) + ALIGN(plen, 8); |
936 | if (old_dir != new_dir) |
937 | len += plen; |
938 | dent = kmalloc(len, GFP_NOFS); |
939 | if (!dent) |
940 | return -ENOMEM; |
941 | |
942 | /* Make reservation before allocating sequence numbers */ |
943 | err = make_reservation(c, BASEHD, len); |
944 | if (err) |
945 | goto out_free; |
946 | |
947 | /* Make new dent */ |
948 | dent->ch.node_type = UBIFS_DENT_NODE; |
949 | dent_key_init_flash(c, &dent->key, new_dir->i_ino, &new_dentry->d_name); |
950 | dent->inum = cpu_to_le64(old_inode->i_ino); |
951 | dent->type = get_dent_type(old_inode->i_mode); |
952 | dent->nlen = cpu_to_le16(new_dentry->d_name.len); |
953 | memcpy(dent->name, new_dentry->d_name.name, new_dentry->d_name.len); |
954 | dent->name[new_dentry->d_name.len] = '\0'; |
955 | zero_dent_node_unused(dent); |
956 | ubifs_prep_grp_node(c, dent, dlen1, 0); |
957 | |
958 | /* Make deletion dent */ |
959 | dent2 = (void *)dent + aligned_dlen1; |
960 | dent2->ch.node_type = UBIFS_DENT_NODE; |
961 | dent_key_init_flash(c, &dent2->key, old_dir->i_ino, |
962 | &old_dentry->d_name); |
963 | dent2->inum = 0; |
964 | dent2->type = DT_UNKNOWN; |
965 | dent2->nlen = cpu_to_le16(old_dentry->d_name.len); |
966 | memcpy(dent2->name, old_dentry->d_name.name, old_dentry->d_name.len); |
967 | dent2->name[old_dentry->d_name.len] = '\0'; |
968 | zero_dent_node_unused(dent2); |
969 | ubifs_prep_grp_node(c, dent2, dlen2, 0); |
970 | |
971 | p = (void *)dent2 + aligned_dlen2; |
972 | if (new_inode) { |
973 | pack_inode(c, p, new_inode, 0); |
974 | p += ALIGN(ilen, 8); |
975 | } |
976 | |
977 | if (!move) |
978 | pack_inode(c, p, old_dir, 1); |
979 | else { |
980 | pack_inode(c, p, old_dir, 0); |
981 | p += ALIGN(plen, 8); |
982 | pack_inode(c, p, new_dir, 1); |
983 | } |
984 | |
985 | if (last_reference) { |
986 | err = ubifs_add_orphan(c, new_inode->i_ino); |
987 | if (err) { |
988 | release_head(c, BASEHD); |
989 | goto out_finish; |
990 | } |
991 | new_ui->del_cmtno = c->cmt_no; |
992 | } |
993 | |
994 | err = write_head(c, BASEHD, dent, len, &lnum, &offs, sync); |
995 | if (err) |
996 | goto out_release; |
997 | if (!sync) { |
998 | struct ubifs_wbuf *wbuf = &c->jheads[BASEHD].wbuf; |
999 | |
1000 | ubifs_wbuf_add_ino_nolock(wbuf, new_dir->i_ino); |
1001 | ubifs_wbuf_add_ino_nolock(wbuf, old_dir->i_ino); |
1002 | if (new_inode) |
1003 | ubifs_wbuf_add_ino_nolock(&c->jheads[BASEHD].wbuf, |
1004 | new_inode->i_ino); |
1005 | } |
1006 | release_head(c, BASEHD); |
1007 | |
1008 | dent_key_init(c, &key, new_dir->i_ino, &new_dentry->d_name); |
1009 | err = ubifs_tnc_add_nm(c, &key, lnum, offs, dlen1, &new_dentry->d_name); |
1010 | if (err) |
1011 | goto out_ro; |
1012 | |
1013 | err = ubifs_add_dirt(c, lnum, dlen2); |
1014 | if (err) |
1015 | goto out_ro; |
1016 | |
1017 | dent_key_init(c, &key, old_dir->i_ino, &old_dentry->d_name); |
1018 | err = ubifs_tnc_remove_nm(c, &key, &old_dentry->d_name); |
1019 | if (err) |
1020 | goto out_ro; |
1021 | |
1022 | offs += aligned_dlen1 + aligned_dlen2; |
1023 | if (new_inode) { |
1024 | ino_key_init(c, &key, new_inode->i_ino); |
1025 | err = ubifs_tnc_add(c, &key, lnum, offs, ilen); |
1026 | if (err) |
1027 | goto out_ro; |
1028 | offs += ALIGN(ilen, 8); |
1029 | } |
1030 | |
1031 | ino_key_init(c, &key, old_dir->i_ino); |
1032 | err = ubifs_tnc_add(c, &key, lnum, offs, plen); |
1033 | if (err) |
1034 | goto out_ro; |
1035 | |
1036 | if (old_dir != new_dir) { |
1037 | offs += ALIGN(plen, 8); |
1038 | ino_key_init(c, &key, new_dir->i_ino); |
1039 | err = ubifs_tnc_add(c, &key, lnum, offs, plen); |
1040 | if (err) |
1041 | goto out_ro; |
1042 | } |
1043 | |
1044 | finish_reservation(c); |
1045 | if (new_inode) { |
1046 | mark_inode_clean(c, new_ui); |
1047 | spin_lock(&new_ui->ui_lock); |
1048 | new_ui->synced_i_size = new_ui->ui_size; |
1049 | spin_unlock(&new_ui->ui_lock); |
1050 | } |
1051 | mark_inode_clean(c, ubifs_inode(old_dir)); |
1052 | if (move) |
1053 | mark_inode_clean(c, ubifs_inode(new_dir)); |
1054 | kfree(dent); |
1055 | return 0; |
1056 | |
1057 | out_release: |
1058 | release_head(c, BASEHD); |
1059 | out_ro: |
1060 | ubifs_ro_mode(c, err); |
1061 | if (last_reference) |
1062 | ubifs_delete_orphan(c, new_inode->i_ino); |
1063 | out_finish: |
1064 | finish_reservation(c); |
1065 | out_free: |
1066 | kfree(dent); |
1067 | return err; |
1068 | } |
1069 | |
1070 | /** |
1071 | * recomp_data_node - re-compress a truncated data node. |
1072 | * @dn: data node to re-compress |
1073 | * @new_len: new length |
1074 | * |
1075 | * This function is used when an inode is truncated and the last data node of |
1076 | * the inode has to be re-compressed and re-written. |
1077 | */ |
1078 | static int recomp_data_node(struct ubifs_data_node *dn, int *new_len) |
1079 | { |
1080 | void *buf; |
1081 | int err, len, compr_type, out_len; |
1082 | |
1083 | out_len = le32_to_cpu(dn->size); |
1084 | buf = kmalloc(out_len * WORST_COMPR_FACTOR, GFP_NOFS); |
1085 | if (!buf) |
1086 | return -ENOMEM; |
1087 | |
1088 | len = le32_to_cpu(dn->ch.len) - UBIFS_DATA_NODE_SZ; |
1089 | compr_type = le16_to_cpu(dn->compr_type); |
1090 | err = ubifs_decompress(&dn->data, len, buf, &out_len, compr_type); |
1091 | if (err) |
1092 | goto out; |
1093 | |
1094 | ubifs_compress(buf, *new_len, &dn->data, &out_len, &compr_type); |
1095 | ubifs_assert(out_len <= UBIFS_BLOCK_SIZE); |
1096 | dn->compr_type = cpu_to_le16(compr_type); |
1097 | dn->size = cpu_to_le32(*new_len); |
1098 | *new_len = UBIFS_DATA_NODE_SZ + out_len; |
1099 | out: |
1100 | kfree(buf); |
1101 | return err; |
1102 | } |
1103 | |
1104 | /** |
1105 | * ubifs_jnl_truncate - update the journal for a truncation. |
1106 | * @c: UBIFS file-system description object |
1107 | * @inode: inode to truncate |
1108 | * @old_size: old size |
1109 | * @new_size: new size |
1110 | * |
1111 | * When the size of a file decreases due to truncation, a truncation node is |
1112 | * written, the journal tree is updated, and the last data block is re-written |
1113 | * if it has been affected. The inode is also updated in order to synchronize |
1114 | * the new inode size. |
1115 | * |
1116 | * This function marks the inode as clean and returns zero on success. In case |
1117 | * of failure, a negative error code is returned. |
1118 | */ |
1119 | int ubifs_jnl_truncate(struct ubifs_info *c, const struct inode *inode, |
1120 | loff_t old_size, loff_t new_size) |
1121 | { |
1122 | union ubifs_key key, to_key; |
1123 | struct ubifs_ino_node *ino; |
1124 | struct ubifs_trun_node *trun; |
1125 | struct ubifs_data_node *uninitialized_var(dn); |
1126 | int err, dlen, len, lnum, offs, bit, sz, sync = IS_SYNC(inode); |
1127 | struct ubifs_inode *ui = ubifs_inode(inode); |
1128 | ino_t inum = inode->i_ino; |
1129 | unsigned int blk; |
1130 | |
1131 | dbg_jnl("ino %lu, size %lld -> %lld", |
1132 | (unsigned long)inum, old_size, new_size); |
1133 | ubifs_assert(!ui->data_len); |
1134 | ubifs_assert(S_ISREG(inode->i_mode)); |
1135 | ubifs_assert(mutex_is_locked(&ui->ui_mutex)); |
1136 | |
1137 | sz = UBIFS_TRUN_NODE_SZ + UBIFS_INO_NODE_SZ + |
1138 | UBIFS_MAX_DATA_NODE_SZ * WORST_COMPR_FACTOR; |
1139 | ino = kmalloc(sz, GFP_NOFS); |
1140 | if (!ino) |
1141 | return -ENOMEM; |
1142 | |
1143 | trun = (void *)ino + UBIFS_INO_NODE_SZ; |
1144 | trun->ch.node_type = UBIFS_TRUN_NODE; |
1145 | trun->inum = cpu_to_le32(inum); |
1146 | trun->old_size = cpu_to_le64(old_size); |
1147 | trun->new_size = cpu_to_le64(new_size); |
1148 | zero_trun_node_unused(trun); |
1149 | |
1150 | dlen = new_size & (UBIFS_BLOCK_SIZE - 1); |
1151 | if (dlen) { |
1152 | /* Get last data block so it can be truncated */ |
1153 | dn = (void *)trun + UBIFS_TRUN_NODE_SZ; |
1154 | blk = new_size >> UBIFS_BLOCK_SHIFT; |
1155 | data_key_init(c, &key, inum, blk); |
1156 | dbg_jnl("last block key %s", DBGKEY(&key)); |
1157 | err = ubifs_tnc_lookup(c, &key, dn); |
1158 | if (err == -ENOENT) |
1159 | dlen = 0; /* Not found (so it is a hole) */ |
1160 | else if (err) |
1161 | goto out_free; |
1162 | else { |
1163 | if (le32_to_cpu(dn->size) <= dlen) |
1164 | dlen = 0; /* Nothing to do */ |
1165 | else { |
1166 | int compr_type = le16_to_cpu(dn->compr_type); |
1167 | |
1168 | if (compr_type != UBIFS_COMPR_NONE) { |
1169 | err = recomp_data_node(dn, &dlen); |
1170 | if (err) |
1171 | goto out_free; |
1172 | } else { |
1173 | dn->size = cpu_to_le32(dlen); |
1174 | dlen += UBIFS_DATA_NODE_SZ; |
1175 | } |
1176 | zero_data_node_unused(dn); |
1177 | } |
1178 | } |
1179 | } |
1180 | |
1181 | /* Must make reservation before allocating sequence numbers */ |
1182 | len = UBIFS_TRUN_NODE_SZ + UBIFS_INO_NODE_SZ; |
1183 | if (dlen) |
1184 | len += dlen; |
1185 | err = make_reservation(c, BASEHD, len); |
1186 | if (err) |
1187 | goto out_free; |
1188 | |
1189 | pack_inode(c, ino, inode, 0); |
1190 | ubifs_prep_grp_node(c, trun, UBIFS_TRUN_NODE_SZ, dlen ? 0 : 1); |
1191 | if (dlen) |
1192 | ubifs_prep_grp_node(c, dn, dlen, 1); |
1193 | |
1194 | err = write_head(c, BASEHD, ino, len, &lnum, &offs, sync); |
1195 | if (err) |
1196 | goto out_release; |
1197 | if (!sync) |
1198 | ubifs_wbuf_add_ino_nolock(&c->jheads[BASEHD].wbuf, inum); |
1199 | release_head(c, BASEHD); |
1200 | |
1201 | if (dlen) { |
1202 | sz = offs + UBIFS_INO_NODE_SZ + UBIFS_TRUN_NODE_SZ; |
1203 | err = ubifs_tnc_add(c, &key, lnum, sz, dlen); |
1204 | if (err) |
1205 | goto out_ro; |
1206 | } |
1207 | |
1208 | ino_key_init(c, &key, inum); |
1209 | err = ubifs_tnc_add(c, &key, lnum, offs, UBIFS_INO_NODE_SZ); |
1210 | if (err) |
1211 | goto out_ro; |
1212 | |
1213 | err = ubifs_add_dirt(c, lnum, UBIFS_TRUN_NODE_SZ); |
1214 | if (err) |
1215 | goto out_ro; |
1216 | |
1217 | bit = new_size & (UBIFS_BLOCK_SIZE - 1); |
1218 | blk = (new_size >> UBIFS_BLOCK_SHIFT) + (bit ? 1 : 0); |
1219 | data_key_init(c, &key, inum, blk); |
1220 | |
1221 | bit = old_size & (UBIFS_BLOCK_SIZE - 1); |
1222 | blk = (old_size >> UBIFS_BLOCK_SHIFT) - (bit ? 0 : 1); |
1223 | data_key_init(c, &to_key, inum, blk); |
1224 | |
1225 | err = ubifs_tnc_remove_range(c, &key, &to_key); |
1226 | if (err) |
1227 | goto out_ro; |
1228 | |
1229 | finish_reservation(c); |
1230 | spin_lock(&ui->ui_lock); |
1231 | ui->synced_i_size = ui->ui_size; |
1232 | spin_unlock(&ui->ui_lock); |
1233 | mark_inode_clean(c, ui); |
1234 | kfree(ino); |
1235 | return 0; |
1236 | |
1237 | out_release: |
1238 | release_head(c, BASEHD); |
1239 | out_ro: |
1240 | ubifs_ro_mode(c, err); |
1241 | finish_reservation(c); |
1242 | out_free: |
1243 | kfree(ino); |
1244 | return err; |
1245 | } |
1246 | |
1247 | #ifdef CONFIG_UBIFS_FS_XATTR |
1248 | |
1249 | /** |
1250 | * ubifs_jnl_delete_xattr - delete an extended attribute. |
1251 | * @c: UBIFS file-system description object |
1252 | * @host: host inode |
1253 | * @inode: extended attribute inode |
1254 | * @nm: extended attribute entry name |
1255 | * |
1256 | * This function delete an extended attribute which is very similar to |
1257 | * un-linking regular files - it writes a deletion xentry, a deletion inode and |
1258 | * updates the target inode. Returns zero in case of success and a negative |
1259 | * error code in case of failure. |
1260 | */ |
1261 | int ubifs_jnl_delete_xattr(struct ubifs_info *c, const struct inode *host, |
1262 | const struct inode *inode, const struct qstr *nm) |
1263 | { |
1264 | int err, xlen, hlen, len, lnum, xent_offs, aligned_xlen; |
1265 | struct ubifs_dent_node *xent; |
1266 | struct ubifs_ino_node *ino; |
1267 | union ubifs_key xent_key, key1, key2; |
1268 | int sync = IS_DIRSYNC(host); |
1269 | struct ubifs_inode *host_ui = ubifs_inode(host); |
1270 | |
1271 | dbg_jnl("host %lu, xattr ino %lu, name '%s', data len %d", |
1272 | host->i_ino, inode->i_ino, nm->name, |
1273 | ubifs_inode(inode)->data_len); |
1274 | ubifs_assert(inode->i_nlink == 0); |
1275 | ubifs_assert(mutex_is_locked(&host_ui->ui_mutex)); |
1276 | |
1277 | /* |
1278 | * Since we are deleting the inode, we do not bother to attach any data |
1279 | * to it and assume its length is %UBIFS_INO_NODE_SZ. |
1280 | */ |
1281 | xlen = UBIFS_DENT_NODE_SZ + nm->len + 1; |
1282 | aligned_xlen = ALIGN(xlen, 8); |
1283 | hlen = host_ui->data_len + UBIFS_INO_NODE_SZ; |
1284 | len = aligned_xlen + UBIFS_INO_NODE_SZ + ALIGN(hlen, 8); |
1285 | |
1286 | xent = kmalloc(len, GFP_NOFS); |
1287 | if (!xent) |
1288 | return -ENOMEM; |
1289 | |
1290 | /* Make reservation before allocating sequence numbers */ |
1291 | err = make_reservation(c, BASEHD, len); |
1292 | if (err) { |
1293 | kfree(xent); |
1294 | return err; |
1295 | } |
1296 | |
1297 | xent->ch.node_type = UBIFS_XENT_NODE; |
1298 | xent_key_init(c, &xent_key, host->i_ino, nm); |
1299 | key_write(c, &xent_key, xent->key); |
1300 | xent->inum = 0; |
1301 | xent->type = get_dent_type(inode->i_mode); |
1302 | xent->nlen = cpu_to_le16(nm->len); |
1303 | memcpy(xent->name, nm->name, nm->len); |
1304 | xent->name[nm->len] = '\0'; |
1305 | zero_dent_node_unused(xent); |
1306 | ubifs_prep_grp_node(c, xent, xlen, 0); |
1307 | |
1308 | ino = (void *)xent + aligned_xlen; |
1309 | pack_inode(c, ino, inode, 0); |
1310 | ino = (void *)ino + UBIFS_INO_NODE_SZ; |
1311 | pack_inode(c, ino, host, 1); |
1312 | |
1313 | err = write_head(c, BASEHD, xent, len, &lnum, &xent_offs, sync); |
1314 | if (!sync && !err) |
1315 | ubifs_wbuf_add_ino_nolock(&c->jheads[BASEHD].wbuf, host->i_ino); |
1316 | release_head(c, BASEHD); |
1317 | kfree(xent); |
1318 | if (err) |
1319 | goto out_ro; |
1320 | |
1321 | /* Remove the extended attribute entry from TNC */ |
1322 | err = ubifs_tnc_remove_nm(c, &xent_key, nm); |
1323 | if (err) |
1324 | goto out_ro; |
1325 | err = ubifs_add_dirt(c, lnum, xlen); |
1326 | if (err) |
1327 | goto out_ro; |
1328 | |
1329 | /* |
1330 | * Remove all nodes belonging to the extended attribute inode from TNC. |
1331 | * Well, there actually must be only one node - the inode itself. |
1332 | */ |
1333 | lowest_ino_key(c, &key1, inode->i_ino); |
1334 | highest_ino_key(c, &key2, inode->i_ino); |
1335 | err = ubifs_tnc_remove_range(c, &key1, &key2); |
1336 | if (err) |
1337 | goto out_ro; |
1338 | err = ubifs_add_dirt(c, lnum, UBIFS_INO_NODE_SZ); |
1339 | if (err) |
1340 | goto out_ro; |
1341 | |
1342 | /* And update TNC with the new host inode position */ |
1343 | ino_key_init(c, &key1, host->i_ino); |
1344 | err = ubifs_tnc_add(c, &key1, lnum, xent_offs + len - hlen, hlen); |
1345 | if (err) |
1346 | goto out_ro; |
1347 | |
1348 | finish_reservation(c); |
1349 | spin_lock(&host_ui->ui_lock); |
1350 | host_ui->synced_i_size = host_ui->ui_size; |
1351 | spin_unlock(&host_ui->ui_lock); |
1352 | mark_inode_clean(c, host_ui); |
1353 | return 0; |
1354 | |
1355 | out_ro: |
1356 | ubifs_ro_mode(c, err); |
1357 | finish_reservation(c); |
1358 | return err; |
1359 | } |
1360 | |
1361 | /** |
1362 | * ubifs_jnl_change_xattr - change an extended attribute. |
1363 | * @c: UBIFS file-system description object |
1364 | * @inode: extended attribute inode |
1365 | * @host: host inode |
1366 | * |
1367 | * This function writes the updated version of an extended attribute inode and |
1368 | * the host inode to the journal (to the base head). The host inode is written |
1369 | * after the extended attribute inode in order to guarantee that the extended |
1370 | * attribute will be flushed when the inode is synchronized by 'fsync()' and |
1371 | * consequently, the write-buffer is synchronized. This function returns zero |
1372 | * in case of success and a negative error code in case of failure. |
1373 | */ |
1374 | int ubifs_jnl_change_xattr(struct ubifs_info *c, const struct inode *inode, |
1375 | const struct inode *host) |
1376 | { |
1377 | int err, len1, len2, aligned_len, aligned_len1, lnum, offs; |
1378 | struct ubifs_inode *host_ui = ubifs_inode(host); |
1379 | struct ubifs_ino_node *ino; |
1380 | union ubifs_key key; |
1381 | int sync = IS_DIRSYNC(host); |
1382 | |
1383 | dbg_jnl("ino %lu, ino %lu", host->i_ino, inode->i_ino); |
1384 | ubifs_assert(host->i_nlink > 0); |
1385 | ubifs_assert(inode->i_nlink > 0); |
1386 | ubifs_assert(mutex_is_locked(&host_ui->ui_mutex)); |
1387 | |
1388 | len1 = UBIFS_INO_NODE_SZ + host_ui->data_len; |
1389 | len2 = UBIFS_INO_NODE_SZ + ubifs_inode(inode)->data_len; |
1390 | aligned_len1 = ALIGN(len1, 8); |
1391 | aligned_len = aligned_len1 + ALIGN(len2, 8); |
1392 | |
1393 | ino = kmalloc(aligned_len, GFP_NOFS); |
1394 | if (!ino) |
1395 | return -ENOMEM; |
1396 | |
1397 | /* Make reservation before allocating sequence numbers */ |
1398 | err = make_reservation(c, BASEHD, aligned_len); |
1399 | if (err) |
1400 | goto out_free; |
1401 | |
1402 | pack_inode(c, ino, host, 0); |
1403 | pack_inode(c, (void *)ino + aligned_len1, inode, 1); |
1404 | |
1405 | err = write_head(c, BASEHD, ino, aligned_len, &lnum, &offs, 0); |
1406 | if (!sync && !err) { |
1407 | struct ubifs_wbuf *wbuf = &c->jheads[BASEHD].wbuf; |
1408 | |
1409 | ubifs_wbuf_add_ino_nolock(wbuf, host->i_ino); |
1410 | ubifs_wbuf_add_ino_nolock(wbuf, inode->i_ino); |
1411 | } |
1412 | release_head(c, BASEHD); |
1413 | if (err) |
1414 | goto out_ro; |
1415 | |
1416 | ino_key_init(c, &key, host->i_ino); |
1417 | err = ubifs_tnc_add(c, &key, lnum, offs, len1); |
1418 | if (err) |
1419 | goto out_ro; |
1420 | |
1421 | ino_key_init(c, &key, inode->i_ino); |
1422 | err = ubifs_tnc_add(c, &key, lnum, offs + aligned_len1, len2); |
1423 | if (err) |
1424 | goto out_ro; |
1425 | |
1426 | finish_reservation(c); |
1427 | spin_lock(&host_ui->ui_lock); |
1428 | host_ui->synced_i_size = host_ui->ui_size; |
1429 | spin_unlock(&host_ui->ui_lock); |
1430 | mark_inode_clean(c, host_ui); |
1431 | kfree(ino); |
1432 | return 0; |
1433 | |
1434 | out_ro: |
1435 | ubifs_ro_mode(c, err); |
1436 | finish_reservation(c); |
1437 | out_free: |
1438 | kfree(ino); |
1439 | return err; |
1440 | } |
1441 | |
1442 | #endif /* CONFIG_UBIFS_FS_XATTR */ |
1443 |
Branches:
ben-wpan
ben-wpan-stefan
javiroman/ks7010
jz-2.6.34
jz-2.6.34-rc5
jz-2.6.34-rc6
jz-2.6.34-rc7
jz-2.6.35
jz-2.6.36
jz-2.6.37
jz-2.6.38
jz-2.6.39
jz-3.0
jz-3.1
jz-3.11
jz-3.12
jz-3.13
jz-3.15
jz-3.16
jz-3.18-dt
jz-3.2
jz-3.3
jz-3.4
jz-3.5
jz-3.6
jz-3.6-rc2-pwm
jz-3.9
jz-3.9-clk
jz-3.9-rc8
jz47xx
jz47xx-2.6.38
master
Tags:
od-2011-09-04
od-2011-09-18
v2.6.34-rc5
v2.6.34-rc6
v2.6.34-rc7
v3.9