Root/
Source at commit 67a52a6f298b883172cee3e596e2f3f8dbcc4d0c created 12 years 8 months ago. By Werner Almesberger, atusb: remove atusb_read2 | |
---|---|
1 | /* |
2 | * atusb - SPI host look-alike for ATSUB |
3 | * |
4 | * Copyright (c) 2011 Richard Sharpe <realrichardsharpe@gmail.com> |
5 | * Copyright (c) 2011 Stefan Schmidt <stefan@datenfreihafen.org> |
6 | * |
7 | * This program is free software; you can redistribute it and/or |
8 | * modify it under the terms of the GNU General Public License as |
9 | * published by the Free Software Foundation, version 2 |
10 | * |
11 | */ |
12 | |
13 | /* |
14 | * - Implement buffer and sram read write |
15 | * - Implement IRQ handling |
16 | */ |
17 | |
18 | #include <linux/kernel.h> |
19 | #include <linux/module.h> |
20 | #include <linux/platform_device.h> |
21 | #include <linux/interrupt.h> |
22 | #include <linux/usb.h> |
23 | #include <linux/spi/spi.h> |
24 | #include <linux/spi/at86rf230.h> |
25 | |
26 | #include "../ieee802154/at86rf230.h" /* dirty */ |
27 | |
28 | #define VENDOR_ID 0x20b7 |
29 | #define PRODUCT_ID 0x1540 |
30 | |
31 | /* The devices we work with */ |
32 | static const struct usb_device_id atusb_device_table[] = { |
33 | { USB_DEVICE(VENDOR_ID, PRODUCT_ID) }, |
34 | { }, |
35 | }; |
36 | MODULE_DEVICE_TABLE(usb, atusb_device_table); |
37 | |
38 | #define ATUSB_BUILD_SIZE 256 |
39 | struct atusb_local { |
40 | struct usb_device * udev; |
41 | /* The interface to the RF part info, if applicable */ |
42 | uint8_t ep0_atusb_major; |
43 | uint8_t ep0_atusb_minor; |
44 | uint8_t atusb_hw_type; |
45 | struct spi_master *master; |
46 | int slave_irq; |
47 | int usb_irq; |
48 | struct at86rf230_platform_data platform_data; |
49 | /* copy platform_data so that we can adapt .reset_data */ |
50 | struct spi_device *spi; |
51 | size_t bulk_in_filled; /* number of bytes in the buffer */ |
52 | struct completion urb_completion; |
53 | // unsigned char buffer[3]; |
54 | unsigned char buffer[260]; /* XXL, just in case */ |
55 | struct spi_message *msg; |
56 | }; |
57 | |
58 | /* Commands to our device. Make sure this is synced with the firmware */ |
59 | enum atspi_requests { |
60 | ATUSB_ID = 0x00, /* system status/control grp */ |
61 | ATUSB_BUILD, |
62 | ATUSB_RESET, |
63 | ATUSB_RF_RESET = 0x10, /* debug/test group */ |
64 | ATUSB_POLL_INT, |
65 | ATUSB_TEST, /* atusb-sil only */ |
66 | ATUSB_TIMER, |
67 | ATUSB_GPIO, |
68 | ATUSB_SLP_TR, |
69 | ATUSB_GPIO_CLEANUP, |
70 | ATUSB_REG_WRITE = 0x20, /* transceiver group */ |
71 | ATUSB_REG_READ, |
72 | ATUSB_BUF_WRITE, |
73 | ATUSB_BUF_READ, |
74 | ATUSB_SRAM_WRITE, |
75 | ATUSB_SRAM_READ, |
76 | ATUSB_SPI_WRITE = 0x30, /* SPI group */ |
77 | ATUSB_SPI_READ1, |
78 | ATUSB_SPI_READ2, |
79 | }; |
80 | |
81 | /* |
82 | * Direction bRequest wValue wIndex wLength |
83 | * |
84 | * ->host ATUSB_ID - - 3 |
85 | * ->host ATUSB_BUILD - - #bytes |
86 | * host-> ATUSB_RESET - - 0 |
87 | * |
88 | * host-> ATUSB_RF_RESET - - 0 |
89 | * ->host ATUSB_POLL_INT - - 1 |
90 | * host-> ATUSB_TEST - - 0 |
91 | * ->host ATUSB_TIMER - - #bytes (6) |
92 | * ->host ATUSB_GPIO dir+data mask+p# 3 |
93 | * host-> ATUSB_SLP_TR - - 0 |
94 | * host-> ATUSB_GPIO_CLEANUP - - 0 |
95 | * |
96 | * host-> ATUSB_REG_WRITE value addr 0 |
97 | * ->host ATUSB_REG_READ - addr 1 |
98 | * host-> ATUSB_BUF_WRITE - - #bytes |
99 | * ->host ATUSB_BUF_READ - - #bytes |
100 | * host-> ATUSB_SRAM_WRITE - addr #bytes |
101 | * ->host ATUSB_SRAM_READ - addr #bytes |
102 | * |
103 | * host-> ATUSB_SPI_WRITE byte0 byte1 #bytes |
104 | * ->host ATUSB_SPI_READ1 byte0 - #bytes |
105 | * ->host ATUSB_SPI_READ2 byte0 byte1 #bytes |
106 | */ |
107 | |
108 | #define ATUSB_FROM_DEV (USB_TYPE_VENDOR | USB_DIR_IN) |
109 | #define ATUSB_TO_DEV (USB_TYPE_VENDOR | USB_DIR_OUT) |
110 | |
111 | static void atusb_read1_cb(struct urb *urb) |
112 | { |
113 | struct atusb_local *atusb = urb->context; |
114 | struct spi_message *msg = atusb->msg; |
115 | |
116 | if (urb->status) { |
117 | if (!(urb->status == -ENOENT || |
118 | urb->status == -ECONNRESET || |
119 | urb->status == -ESHUTDOWN)) |
120 | printk("Async USB failed with error %i\n", urb->status); |
121 | msg->actual_length = 0; |
122 | } else { |
123 | printk("Async USB succeeded with length %i\n", urb->actual_length); |
124 | } |
125 | |
126 | msg->status = urb->status; |
127 | msg->complete(msg->context); |
128 | |
129 | kfree(urb->setup_packet); |
130 | usb_free_urb(urb); |
131 | } |
132 | |
133 | static void atusb_read_fb_cb(struct urb *urb) |
134 | { |
135 | struct atusb_local *atusb = urb->context; |
136 | struct spi_message *msg = atusb->msg; |
137 | const struct spi_transfer *xfer; |
138 | uint8_t *rx; |
139 | |
140 | if (urb->status) { |
141 | if (!(urb->status == -ENOENT || |
142 | urb->status == -ECONNRESET || |
143 | urb->status == -ESHUTDOWN)) |
144 | printk("Async USB failed with error %i\n", urb->status); |
145 | msg->actual_length = 0; |
146 | } else { |
147 | printk("Async USB succeeded with length %i\n", urb->actual_length); |
148 | BUG_ON(!urb->actual_length); |
149 | xfer = list_first_entry(&msg->transfers, struct spi_transfer, |
150 | transfer_list); |
151 | rx = xfer->rx_buf; |
152 | rx[1] = atusb->buffer[0]; |
153 | xfer = list_entry(xfer->transfer_list.next, |
154 | struct spi_transfer, transfer_list); |
155 | memcpy(xfer->rx_buf, atusb->buffer+1, urb->actual_length-1); |
156 | } |
157 | |
158 | msg->status = urb->status; |
159 | msg->complete(msg->context); |
160 | |
161 | kfree(urb->setup_packet); |
162 | usb_free_urb(urb); |
163 | } |
164 | |
165 | static int atusb_get_and_show_revision(struct atusb_local *atusb) |
166 | { |
167 | struct usb_device *dev = atusb->udev; |
168 | int retval; |
169 | |
170 | /* Get a couple of the ATMega Firmware values */ |
171 | retval = usb_control_msg(dev, |
172 | usb_rcvctrlpipe(dev, 0), |
173 | ATUSB_ID, ATUSB_FROM_DEV, 0, 0, |
174 | atusb->buffer, 3, 1000); |
175 | if (retval < 0) { |
176 | dev_info(&dev->dev, |
177 | "failed submitting urb for ATUSB_ID, error %d", retval); |
178 | return retval == -ENOMEM ? retval : -EIO; |
179 | } |
180 | |
181 | atusb->ep0_atusb_major = atusb->buffer[0]; |
182 | atusb->ep0_atusb_minor = atusb->buffer[1]; |
183 | atusb->atusb_hw_type = atusb->buffer[2]; |
184 | dev_info(&dev->dev, |
185 | "Firmware: major: %u, minor: %u, hardware type: %u\n", |
186 | atusb->ep0_atusb_major, atusb->ep0_atusb_minor, |
187 | atusb->atusb_hw_type); |
188 | |
189 | return 0; |
190 | } |
191 | |
192 | static int atusb_get_and_show_build(struct atusb_local *atusb) |
193 | { |
194 | struct usb_device *dev = atusb->udev; |
195 | char build[ATUSB_BUILD_SIZE+1]; |
196 | int retval; |
197 | |
198 | retval = usb_control_msg(dev, |
199 | usb_rcvctrlpipe(atusb->udev, 0), |
200 | ATUSB_BUILD, ATUSB_FROM_DEV, 0, 0, |
201 | build, ATUSB_BUILD_SIZE+1, 1000); |
202 | if (retval < 0) { |
203 | dev_info(&dev->dev, |
204 | "failed submitting urb for ATUSB_BUILD, error %d", retval); |
205 | return retval == -ENOMEM ? retval : -EIO; |
206 | } |
207 | |
208 | dev_info(&dev->dev, "Firmware: build %s\n", build); |
209 | |
210 | return 0; |
211 | } |
212 | |
213 | static void atusb_reset(void *reset_data) |
214 | { |
215 | int retval; |
216 | struct atusb_local *atusb = reset_data; |
217 | |
218 | retval = usb_control_msg(atusb->udev, |
219 | usb_rcvctrlpipe(atusb->udev, 0), |
220 | ATUSB_RF_RESET, ATUSB_TO_DEV, 0, 0, |
221 | NULL, 0, 1000); |
222 | if (retval < 0) { |
223 | dev_info(&atusb->udev->dev, |
224 | "%s: error doing reset retval = %d\n", |
225 | __func__, retval); |
226 | } |
227 | } |
228 | |
229 | static int submit_control_msg(struct atusb_local *atusb, |
230 | __u8 request, __u8 requesttype, __u16 value, __u16 index, |
231 | void *data, __u16 size, usb_complete_t complete_fn, void *context) |
232 | { |
233 | struct usb_device *dev = atusb->udev; |
234 | struct usb_ctrlrequest *req; |
235 | struct urb *urb; |
236 | int retval = -ENOMEM; |
237 | |
238 | req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL); |
239 | if (!req) |
240 | return -ENOMEM; |
241 | |
242 | req->bRequest = request; |
243 | req->bRequestType = requesttype; |
244 | req->wValue = cpu_to_le16(value); |
245 | req->wIndex = cpu_to_le16(index); |
246 | req->wLength = cpu_to_le16(size); |
247 | |
248 | urb = usb_alloc_urb(0, GFP_KERNEL); |
249 | if (!urb) |
250 | goto out_nourb; |
251 | |
252 | usb_fill_control_urb(urb, dev, |
253 | requesttype == ATUSB_FROM_DEV ? |
254 | usb_rcvctrlpipe(dev, 0) : usb_sndctrlpipe(dev, 0), |
255 | (unsigned char *) req, data, size, complete_fn, context); |
256 | |
257 | retval = usb_submit_urb(urb, GFP_KERNEL); |
258 | if (!retval) |
259 | return 0; |
260 | dev_info(&dev->dev, "failed submitting read urb, error %d", |
261 | retval); |
262 | retval = retval == -ENOMEM ? retval : -EIO; |
263 | |
264 | usb_free_urb(urb); |
265 | out_nourb: |
266 | kfree(req); |
267 | |
268 | return retval; |
269 | } |
270 | |
271 | |
272 | static int atusb_read1(struct atusb_local *atusb, |
273 | uint8_t tx, uint8_t *rx, int len) |
274 | { |
275 | dev_info(&atusb->udev->dev, "atusb_read1: tx = 0x%x\n", tx); |
276 | return submit_control_msg(atusb, |
277 | ATUSB_SPI_READ1, ATUSB_FROM_DEV, tx, 0, |
278 | rx, 1, atusb_read1_cb, atusb); |
279 | } |
280 | |
281 | static int atusb_read_fb(struct atusb_local *atusb, |
282 | uint8_t tx, uint8_t *rx0, uint8_t *rx, int len) |
283 | { |
284 | dev_info(&atusb->udev->dev, "atusb_read_fb: tx = 0x%x\n", tx); |
285 | return submit_control_msg(atusb, |
286 | ATUSB_SPI_READ1, ATUSB_FROM_DEV, tx, 0, |
287 | atusb->buffer, len+1, atusb_read_fb_cb, atusb); |
288 | } |
289 | |
290 | static int atusb_write(struct atusb_local *atusb, |
291 | uint8_t tx0, uint8_t tx1, const uint8_t *tx, int len) |
292 | { |
293 | dev_info(&atusb->udev->dev, "atusb_write: tx[0] = 0x%x\n", tx0); |
294 | dev_info(&atusb->udev->dev, "atusb_write: tx[1] = 0x%x\n", tx1); |
295 | return submit_control_msg(atusb, |
296 | ATUSB_SPI_WRITE, ATUSB_TO_DEV, tx0, tx1, |
297 | (uint8_t *) tx, len, atusb_read1_cb, atusb); |
298 | } |
299 | |
300 | static int atusb_transfer(struct spi_device *spi, struct spi_message *msg) |
301 | { |
302 | struct atusb_local *atusb = spi_master_get_devdata(spi->master); |
303 | struct spi_transfer *xfer; |
304 | struct spi_transfer *x[2]; |
305 | int n; |
306 | const uint8_t *tx; |
307 | uint8_t *rx; |
308 | int len; |
309 | int retval = 0; |
310 | |
311 | if (unlikely(list_empty(&msg->transfers))) { |
312 | dev_err(&atusb->udev->dev, "transfer is empty\n"); |
313 | return -EINVAL; |
314 | } |
315 | |
316 | atusb->msg = msg; |
317 | |
318 | /* Classify the request */ |
319 | n = 0; |
320 | list_for_each_entry(xfer, &msg->transfers, transfer_list) { |
321 | if (n == ARRAY_SIZE(x)) { |
322 | dev_info(&atusb->udev->dev, "too many transfers\n"); |
323 | return -EINVAL; |
324 | } |
325 | x[n] = xfer; |
326 | n++; |
327 | } |
328 | |
329 | tx = x[0]->tx_buf; |
330 | rx = x[0]->rx_buf; |
331 | len = x[0]->len; |
332 | |
333 | msg->actual_length = len; |
334 | |
335 | if (!tx || len != 2) |
336 | goto bad_req; |
337 | if (n == 1) { |
338 | if (rx) { |
339 | dev_info(&atusb->udev->dev, "read 1\n"); |
340 | retval = atusb_read1(atusb, tx[0], rx+1, len-1); |
341 | } else { |
342 | dev_info(&atusb->udev->dev, "write 2\n"); |
343 | /* |
344 | * Don't take our clock away !! ;-) |
345 | */ |
346 | if (tx[0] == (CMD_REG | CMD_WRITE | RG_TRX_CTRL_0)) { |
347 | msg->status = 0; |
348 | msg->complete(msg->context); |
349 | } else { |
350 | retval = atusb_write(atusb, |
351 | tx[0], tx[1], NULL, 0); |
352 | } |
353 | } |
354 | } else { |
355 | if (x[0]->rx_buf) { |
356 | if (x[1]->tx_buf || !x[1]->rx_buf) |
357 | goto bad_req; |
358 | dev_info(&atusb->udev->dev, "read 1+\n"); |
359 | retval = atusb_read_fb(atusb, tx[0], rx+1, |
360 | x[1]->rx_buf, x[1]->len); |
361 | } else { |
362 | if (!x[1]->tx_buf ||x[1]->rx_buf) |
363 | goto bad_req; |
364 | dev_info(&atusb->udev->dev, "write 2+n\n"); |
365 | retval = atusb_write(atusb, tx[0], tx[1], |
366 | x[1]->tx_buf, x[1]->len); |
367 | } |
368 | } |
369 | #if 0 |
370 | /* |
371 | * The AT86RF230 driver sometimes requires a transceiver state |
372 | * transition to be an interrupt barrier. This is the case after |
373 | * writing FORCE_TX_ON to the TRX_CMD field in the TRX_STATE register. |
374 | * |
375 | * Since there is no other means of notification, we just decode the |
376 | * transfer and do a bit of pattern matching. |
377 | */ |
378 | xfer = list_first_entry(&msg->transfers, struct spi_transfer, |
379 | transfer_list); |
380 | tx = xfer->tx_buf; |
381 | if (tx && xfer->len == 2 && |
382 | tx[0] == (CMD_REG | CMD_WRITE | RG_TRX_STATE) && |
383 | (tx[1] & 0x1f) == STATE_FORCE_TX_ON) |
384 | synchronize_irq(atusb->gpio_irq); |
385 | #endif |
386 | return retval; |
387 | |
388 | bad_req: |
389 | dev_info(&atusb->udev->dev, "unrecognized request:\n"); |
390 | list_for_each_entry(xfer, &msg->transfers, transfer_list) |
391 | dev_info(&atusb->udev->dev, "%stx %srx len %u\n", |
392 | xfer->tx_buf ? "" : "!", xfer->rx_buf ? " " : "!", |
393 | xfer->len); |
394 | return -EINVAL; |
395 | } |
396 | |
397 | static int atusb_setup(struct spi_device *spi) |
398 | { |
399 | return 0; |
400 | } |
401 | #if 0 |
402 | static irqreturn_t atusb_irq(int irq, void *data) |
403 | { |
404 | struct atusb_local *atusb = data; |
405 | |
406 | generic_handle_irq(atusb->slave_irq); |
407 | return IRQ_HANDLED; |
408 | } |
409 | #endif |
410 | static void atusb_irq_mask(struct irq_data *data) |
411 | { |
412 | // struct atben_local *atusb = irq_data_get_irq_chip_data(data); |
413 | |
414 | // disable_irq_nosync(atusb->usb_irq); |
415 | } |
416 | |
417 | static void atusb_irq_unmask(struct irq_data *data) |
418 | { |
419 | // struct atben_local *atusb = irq_data_get_irq_chip_data(data); |
420 | |
421 | // enable_irq(atusb->usb_irq); |
422 | } |
423 | |
424 | static struct irq_chip atusb_irq_chip = { |
425 | .name = "atusb-slave", |
426 | .irq_mask = atusb_irq_mask, |
427 | .irq_unmask = atusb_irq_unmask, |
428 | }; |
429 | |
430 | struct at86rf230_platform_data at86rf230_platform_data = { |
431 | .rstn = -1, |
432 | .slp_tr = -1, |
433 | .dig2 = -1, |
434 | .reset = atusb_reset, |
435 | /* set .reset_data later */ |
436 | }; |
437 | |
438 | static int atusb_probe(struct usb_interface *interface, |
439 | const struct usb_device_id *id) |
440 | { |
441 | struct spi_board_info board_info = { |
442 | .modalias = "at86rf230", |
443 | /* set .irq later */ |
444 | .chip_select = 0, |
445 | .bus_num = -1, |
446 | .max_speed_hz = 8 * 1000 * 1000, |
447 | }; |
448 | |
449 | struct usb_device *udev = interface_to_usbdev(interface); |
450 | struct atusb_local *atusb = NULL; |
451 | struct spi_master *master; |
452 | int retval; |
453 | |
454 | /* |
455 | * Ignore all interfaces used for DFU, i.e., everything while in the |
456 | * boot loader, and interface #1 when in the application. |
457 | */ |
458 | if (interface->cur_altsetting->desc.bInterfaceClass != |
459 | USB_CLASS_VENDOR_SPEC) { |
460 | dev_info(&udev->dev, |
461 | "Ignoring interface with class 0x%02x\n", |
462 | interface->cur_altsetting->desc.bInterfaceClass); |
463 | return -ENODEV; |
464 | } |
465 | |
466 | master = spi_alloc_master(&udev->dev, sizeof(*atusb)); |
467 | if (!master) |
468 | return -ENOMEM; |
469 | |
470 | atusb = spi_master_get_devdata(master); |
471 | |
472 | init_completion(&atusb->urb_completion); |
473 | |
474 | atusb->udev = usb_get_dev(udev); |
475 | usb_set_intfdata(interface, atusb); |
476 | |
477 | atusb->master = spi_master_get(master); |
478 | |
479 | master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; |
480 | master->bus_num = -1; |
481 | master->num_chipselect = 1; |
482 | master->setup = atusb_setup; |
483 | master->transfer = atusb_transfer; |
484 | |
485 | atusb->slave_irq = irq_alloc_desc(numa_node_id()); |
486 | if (atusb->slave_irq < 0) { |
487 | dev_info(&udev->dev, "can't allocate slave irq\n"); |
488 | retval = -ENXIO; |
489 | goto err_free; |
490 | } |
491 | |
492 | set_irq_chip_data(atusb->slave_irq, atusb); |
493 | set_irq_chip_and_handler(atusb->slave_irq, &atusb_irq_chip, |
494 | handle_level_irq); |
495 | |
496 | /* FIXME prepare USB IRQ */ |
497 | |
498 | retval = spi_register_master(master); |
499 | if (retval < 0) { |
500 | dev_info(&udev->dev, "can't register spi master\n"); |
501 | goto err_slave_irq; |
502 | } |
503 | |
504 | atusb->platform_data = at86rf230_platform_data; |
505 | atusb->platform_data.reset_data = atusb; |
506 | board_info.platform_data = &atusb->platform_data; |
507 | board_info.irq = atusb->slave_irq; |
508 | |
509 | atusb->spi = spi_new_device(master, &board_info); |
510 | if (!atusb->spi) { |
511 | dev_info(&udev->dev, "can't create new device for %s\n", |
512 | board_info.modalias); |
513 | goto err_master; |
514 | } |
515 | |
516 | dev_info(&atusb->spi->dev, "ATUSB ready for mischief (IRQ %d)\n", board_info.irq); |
517 | |
518 | if (atusb_get_and_show_revision(atusb) < 0) |
519 | goto err_master; |
520 | if (atusb_get_and_show_build(atusb) < 0) |
521 | goto err_master; |
522 | |
523 | return 0; |
524 | |
525 | err_master: |
526 | spi_master_put(atusb->master); |
527 | err_slave_irq: |
528 | set_irq_chained_handler(atusb->slave_irq, NULL); |
529 | set_irq_chip_data(atusb->slave_irq, NULL); |
530 | irq_free_desc(atusb->slave_irq); |
531 | err_free: |
532 | return retval; |
533 | } |
534 | |
535 | static void atusb_disconnect(struct usb_interface *interface) |
536 | { |
537 | struct atusb_local *atusb = usb_get_intfdata(interface); |
538 | struct spi_master *master = atusb->master; |
539 | |
540 | usb_set_intfdata(interface, NULL); |
541 | usb_put_dev(atusb->udev); |
542 | |
543 | spi_dev_put(atusb->spi); |
544 | |
545 | spi_unregister_master(master); |
546 | |
547 | set_irq_chained_handler(atusb->slave_irq, NULL); |
548 | set_irq_chip_data(atusb->slave_irq, NULL); |
549 | irq_free_desc(atusb->slave_irq); |
550 | |
551 | spi_master_put(master); |
552 | } |
553 | |
554 | void atusb_release(struct device *dev) |
555 | { |
556 | return; |
557 | } |
558 | |
559 | static struct usb_driver atusb_driver = { |
560 | .name = "atusb_ben-wpan", |
561 | .probe = atusb_probe, |
562 | .disconnect = atusb_disconnect, |
563 | .id_table = atusb_device_table, |
564 | }; |
565 | |
566 | static struct platform_device atusb_device = { |
567 | .name = "spi_atusb", |
568 | .id = -1, |
569 | .dev.release = atusb_release, |
570 | }; |
571 | |
572 | static int __init atusb_init(void) |
573 | { |
574 | int retval; |
575 | |
576 | retval = platform_device_register(&atusb_device); |
577 | if (retval) |
578 | return retval; |
579 | |
580 | return usb_register(&atusb_driver); |
581 | } |
582 | |
583 | static void __exit atusb_exit(void) |
584 | { |
585 | usb_deregister(&atusb_driver); |
586 | platform_device_unregister(&atusb_device); |
587 | } |
588 | |
589 | module_init (atusb_init); |
590 | module_exit (atusb_exit); |
591 | |
592 | MODULE_AUTHOR("Richard Sharpe <realrichardsharpe@gmail.com>, Stefan Schmidt \ |
593 | <stefan@datenfreihafen.org>"); |
594 | MODULE_DESCRIPTION( "ATUSB ben-wpan Driver"); |
595 | MODULE_LICENSE("GPL"); |
596 |
Branches:
ben-wpan
ben-wpan-stefan
javiroman/ks7010
jz-2.6.34
jz-2.6.34-rc5
jz-2.6.34-rc6
jz-2.6.34-rc7
jz-2.6.35
jz-2.6.36
jz-2.6.37
jz-2.6.38
jz-2.6.39
jz-3.0
jz-3.1
jz-3.11
jz-3.12
jz-3.13
jz-3.15
jz-3.16
jz-3.18-dt
jz-3.2
jz-3.3
jz-3.4
jz-3.5
jz-3.6
jz-3.6-rc2-pwm
jz-3.9
jz-3.9-clk
jz-3.9-rc8
jz47xx
jz47xx-2.6.38
master
Tags:
od-2011-09-04
od-2011-09-18
v2.6.34-rc5
v2.6.34-rc6
v2.6.34-rc7
v3.9