Root/
Source at commit cdde9cf73945d547acd3e96f9508c79e84ad0bf1 created 12 years 9 months ago. By Maarten ter Huurne, MMC: JZ4740: Added support for CPU frequency changing | |
---|---|
1 | /* |
2 | * linux/kernel/hrtimer.c |
3 | * |
4 | * Copyright(C) 2005-2006, Thomas Gleixner <tglx@linutronix.de> |
5 | * Copyright(C) 2005-2007, Red Hat, Inc., Ingo Molnar |
6 | * Copyright(C) 2006-2007 Timesys Corp., Thomas Gleixner |
7 | * |
8 | * High-resolution kernel timers |
9 | * |
10 | * In contrast to the low-resolution timeout API implemented in |
11 | * kernel/timer.c, hrtimers provide finer resolution and accuracy |
12 | * depending on system configuration and capabilities. |
13 | * |
14 | * These timers are currently used for: |
15 | * - itimers |
16 | * - POSIX timers |
17 | * - nanosleep |
18 | * - precise in-kernel timing |
19 | * |
20 | * Started by: Thomas Gleixner and Ingo Molnar |
21 | * |
22 | * Credits: |
23 | * based on kernel/timer.c |
24 | * |
25 | * Help, testing, suggestions, bugfixes, improvements were |
26 | * provided by: |
27 | * |
28 | * George Anzinger, Andrew Morton, Steven Rostedt, Roman Zippel |
29 | * et. al. |
30 | * |
31 | * For licencing details see kernel-base/COPYING |
32 | */ |
33 | |
34 | #include <linux/cpu.h> |
35 | #include <linux/export.h> |
36 | #include <linux/percpu.h> |
37 | #include <linux/hrtimer.h> |
38 | #include <linux/notifier.h> |
39 | #include <linux/syscalls.h> |
40 | #include <linux/kallsyms.h> |
41 | #include <linux/interrupt.h> |
42 | #include <linux/tick.h> |
43 | #include <linux/seq_file.h> |
44 | #include <linux/err.h> |
45 | #include <linux/debugobjects.h> |
46 | #include <linux/sched.h> |
47 | #include <linux/timer.h> |
48 | |
49 | #include <asm/uaccess.h> |
50 | |
51 | #include <trace/events/timer.h> |
52 | |
53 | /* |
54 | * The timer bases: |
55 | * |
56 | * There are more clockids then hrtimer bases. Thus, we index |
57 | * into the timer bases by the hrtimer_base_type enum. When trying |
58 | * to reach a base using a clockid, hrtimer_clockid_to_base() |
59 | * is used to convert from clockid to the proper hrtimer_base_type. |
60 | */ |
61 | DEFINE_PER_CPU(struct hrtimer_cpu_base, hrtimer_bases) = |
62 | { |
63 | |
64 | .clock_base = |
65 | { |
66 | { |
67 | .index = HRTIMER_BASE_MONOTONIC, |
68 | .clockid = CLOCK_MONOTONIC, |
69 | .get_time = &ktime_get, |
70 | .resolution = KTIME_LOW_RES, |
71 | }, |
72 | { |
73 | .index = HRTIMER_BASE_REALTIME, |
74 | .clockid = CLOCK_REALTIME, |
75 | .get_time = &ktime_get_real, |
76 | .resolution = KTIME_LOW_RES, |
77 | }, |
78 | { |
79 | .index = HRTIMER_BASE_BOOTTIME, |
80 | .clockid = CLOCK_BOOTTIME, |
81 | .get_time = &ktime_get_boottime, |
82 | .resolution = KTIME_LOW_RES, |
83 | }, |
84 | } |
85 | }; |
86 | |
87 | static const int hrtimer_clock_to_base_table[MAX_CLOCKS] = { |
88 | [CLOCK_REALTIME] = HRTIMER_BASE_REALTIME, |
89 | [CLOCK_MONOTONIC] = HRTIMER_BASE_MONOTONIC, |
90 | [CLOCK_BOOTTIME] = HRTIMER_BASE_BOOTTIME, |
91 | }; |
92 | |
93 | static inline int hrtimer_clockid_to_base(clockid_t clock_id) |
94 | { |
95 | return hrtimer_clock_to_base_table[clock_id]; |
96 | } |
97 | |
98 | |
99 | /* |
100 | * Get the coarse grained time at the softirq based on xtime and |
101 | * wall_to_monotonic. |
102 | */ |
103 | static void hrtimer_get_softirq_time(struct hrtimer_cpu_base *base) |
104 | { |
105 | ktime_t xtim, mono, boot; |
106 | struct timespec xts, tom, slp; |
107 | |
108 | get_xtime_and_monotonic_and_sleep_offset(&xts, &tom, &slp); |
109 | |
110 | xtim = timespec_to_ktime(xts); |
111 | mono = ktime_add(xtim, timespec_to_ktime(tom)); |
112 | boot = ktime_add(mono, timespec_to_ktime(slp)); |
113 | base->clock_base[HRTIMER_BASE_REALTIME].softirq_time = xtim; |
114 | base->clock_base[HRTIMER_BASE_MONOTONIC].softirq_time = mono; |
115 | base->clock_base[HRTIMER_BASE_BOOTTIME].softirq_time = boot; |
116 | } |
117 | |
118 | /* |
119 | * Functions and macros which are different for UP/SMP systems are kept in a |
120 | * single place |
121 | */ |
122 | #ifdef CONFIG_SMP |
123 | |
124 | /* |
125 | * We are using hashed locking: holding per_cpu(hrtimer_bases)[n].lock |
126 | * means that all timers which are tied to this base via timer->base are |
127 | * locked, and the base itself is locked too. |
128 | * |
129 | * So __run_timers/migrate_timers can safely modify all timers which could |
130 | * be found on the lists/queues. |
131 | * |
132 | * When the timer's base is locked, and the timer removed from list, it is |
133 | * possible to set timer->base = NULL and drop the lock: the timer remains |
134 | * locked. |
135 | */ |
136 | static |
137 | struct hrtimer_clock_base *lock_hrtimer_base(const struct hrtimer *timer, |
138 | unsigned long *flags) |
139 | { |
140 | struct hrtimer_clock_base *base; |
141 | |
142 | for (;;) { |
143 | base = timer->base; |
144 | if (likely(base != NULL)) { |
145 | raw_spin_lock_irqsave(&base->cpu_base->lock, *flags); |
146 | if (likely(base == timer->base)) |
147 | return base; |
148 | /* The timer has migrated to another CPU: */ |
149 | raw_spin_unlock_irqrestore(&base->cpu_base->lock, *flags); |
150 | } |
151 | cpu_relax(); |
152 | } |
153 | } |
154 | |
155 | |
156 | /* |
157 | * Get the preferred target CPU for NOHZ |
158 | */ |
159 | static int hrtimer_get_target(int this_cpu, int pinned) |
160 | { |
161 | #ifdef CONFIG_NO_HZ |
162 | if (!pinned && get_sysctl_timer_migration() && idle_cpu(this_cpu)) |
163 | return get_nohz_timer_target(); |
164 | #endif |
165 | return this_cpu; |
166 | } |
167 | |
168 | /* |
169 | * With HIGHRES=y we do not migrate the timer when it is expiring |
170 | * before the next event on the target cpu because we cannot reprogram |
171 | * the target cpu hardware and we would cause it to fire late. |
172 | * |
173 | * Called with cpu_base->lock of target cpu held. |
174 | */ |
175 | static int |
176 | hrtimer_check_target(struct hrtimer *timer, struct hrtimer_clock_base *new_base) |
177 | { |
178 | #ifdef CONFIG_HIGH_RES_TIMERS |
179 | ktime_t expires; |
180 | |
181 | if (!new_base->cpu_base->hres_active) |
182 | return 0; |
183 | |
184 | expires = ktime_sub(hrtimer_get_expires(timer), new_base->offset); |
185 | return expires.tv64 <= new_base->cpu_base->expires_next.tv64; |
186 | #else |
187 | return 0; |
188 | #endif |
189 | } |
190 | |
191 | /* |
192 | * Switch the timer base to the current CPU when possible. |
193 | */ |
194 | static inline struct hrtimer_clock_base * |
195 | switch_hrtimer_base(struct hrtimer *timer, struct hrtimer_clock_base *base, |
196 | int pinned) |
197 | { |
198 | struct hrtimer_clock_base *new_base; |
199 | struct hrtimer_cpu_base *new_cpu_base; |
200 | int this_cpu = smp_processor_id(); |
201 | int cpu = hrtimer_get_target(this_cpu, pinned); |
202 | int basenum = base->index; |
203 | |
204 | again: |
205 | new_cpu_base = &per_cpu(hrtimer_bases, cpu); |
206 | new_base = &new_cpu_base->clock_base[basenum]; |
207 | |
208 | if (base != new_base) { |
209 | /* |
210 | * We are trying to move timer to new_base. |
211 | * However we can't change timer's base while it is running, |
212 | * so we keep it on the same CPU. No hassle vs. reprogramming |
213 | * the event source in the high resolution case. The softirq |
214 | * code will take care of this when the timer function has |
215 | * completed. There is no conflict as we hold the lock until |
216 | * the timer is enqueued. |
217 | */ |
218 | if (unlikely(hrtimer_callback_running(timer))) |
219 | return base; |
220 | |
221 | /* See the comment in lock_timer_base() */ |
222 | timer->base = NULL; |
223 | raw_spin_unlock(&base->cpu_base->lock); |
224 | raw_spin_lock(&new_base->cpu_base->lock); |
225 | |
226 | if (cpu != this_cpu && hrtimer_check_target(timer, new_base)) { |
227 | cpu = this_cpu; |
228 | raw_spin_unlock(&new_base->cpu_base->lock); |
229 | raw_spin_lock(&base->cpu_base->lock); |
230 | timer->base = base; |
231 | goto again; |
232 | } |
233 | timer->base = new_base; |
234 | } |
235 | return new_base; |
236 | } |
237 | |
238 | #else /* CONFIG_SMP */ |
239 | |
240 | static inline struct hrtimer_clock_base * |
241 | lock_hrtimer_base(const struct hrtimer *timer, unsigned long *flags) |
242 | { |
243 | struct hrtimer_clock_base *base = timer->base; |
244 | |
245 | raw_spin_lock_irqsave(&base->cpu_base->lock, *flags); |
246 | |
247 | return base; |
248 | } |
249 | |
250 | # define switch_hrtimer_base(t, b, p) (b) |
251 | |
252 | #endif /* !CONFIG_SMP */ |
253 | |
254 | /* |
255 | * Functions for the union type storage format of ktime_t which are |
256 | * too large for inlining: |
257 | */ |
258 | #if BITS_PER_LONG < 64 |
259 | # ifndef CONFIG_KTIME_SCALAR |
260 | /** |
261 | * ktime_add_ns - Add a scalar nanoseconds value to a ktime_t variable |
262 | * @kt: addend |
263 | * @nsec: the scalar nsec value to add |
264 | * |
265 | * Returns the sum of kt and nsec in ktime_t format |
266 | */ |
267 | ktime_t ktime_add_ns(const ktime_t kt, u64 nsec) |
268 | { |
269 | ktime_t tmp; |
270 | |
271 | if (likely(nsec < NSEC_PER_SEC)) { |
272 | tmp.tv64 = nsec; |
273 | } else { |
274 | unsigned long rem = do_div(nsec, NSEC_PER_SEC); |
275 | |
276 | tmp = ktime_set((long)nsec, rem); |
277 | } |
278 | |
279 | return ktime_add(kt, tmp); |
280 | } |
281 | |
282 | EXPORT_SYMBOL_GPL(ktime_add_ns); |
283 | |
284 | /** |
285 | * ktime_sub_ns - Subtract a scalar nanoseconds value from a ktime_t variable |
286 | * @kt: minuend |
287 | * @nsec: the scalar nsec value to subtract |
288 | * |
289 | * Returns the subtraction of @nsec from @kt in ktime_t format |
290 | */ |
291 | ktime_t ktime_sub_ns(const ktime_t kt, u64 nsec) |
292 | { |
293 | ktime_t tmp; |
294 | |
295 | if (likely(nsec < NSEC_PER_SEC)) { |
296 | tmp.tv64 = nsec; |
297 | } else { |
298 | unsigned long rem = do_div(nsec, NSEC_PER_SEC); |
299 | |
300 | tmp = ktime_set((long)nsec, rem); |
301 | } |
302 | |
303 | return ktime_sub(kt, tmp); |
304 | } |
305 | |
306 | EXPORT_SYMBOL_GPL(ktime_sub_ns); |
307 | # endif /* !CONFIG_KTIME_SCALAR */ |
308 | |
309 | /* |
310 | * Divide a ktime value by a nanosecond value |
311 | */ |
312 | u64 ktime_divns(const ktime_t kt, s64 div) |
313 | { |
314 | u64 dclc; |
315 | int sft = 0; |
316 | |
317 | dclc = ktime_to_ns(kt); |
318 | /* Make sure the divisor is less than 2^32: */ |
319 | while (div >> 32) { |
320 | sft++; |
321 | div >>= 1; |
322 | } |
323 | dclc >>= sft; |
324 | do_div(dclc, (unsigned long) div); |
325 | |
326 | return dclc; |
327 | } |
328 | #endif /* BITS_PER_LONG >= 64 */ |
329 | |
330 | /* |
331 | * Add two ktime values and do a safety check for overflow: |
332 | */ |
333 | ktime_t ktime_add_safe(const ktime_t lhs, const ktime_t rhs) |
334 | { |
335 | ktime_t res = ktime_add(lhs, rhs); |
336 | |
337 | /* |
338 | * We use KTIME_SEC_MAX here, the maximum timeout which we can |
339 | * return to user space in a timespec: |
340 | */ |
341 | if (res.tv64 < 0 || res.tv64 < lhs.tv64 || res.tv64 < rhs.tv64) |
342 | res = ktime_set(KTIME_SEC_MAX, 0); |
343 | |
344 | return res; |
345 | } |
346 | |
347 | EXPORT_SYMBOL_GPL(ktime_add_safe); |
348 | |
349 | #ifdef CONFIG_DEBUG_OBJECTS_TIMERS |
350 | |
351 | static struct debug_obj_descr hrtimer_debug_descr; |
352 | |
353 | static void *hrtimer_debug_hint(void *addr) |
354 | { |
355 | return ((struct hrtimer *) addr)->function; |
356 | } |
357 | |
358 | /* |
359 | * fixup_init is called when: |
360 | * - an active object is initialized |
361 | */ |
362 | static int hrtimer_fixup_init(void *addr, enum debug_obj_state state) |
363 | { |
364 | struct hrtimer *timer = addr; |
365 | |
366 | switch (state) { |
367 | case ODEBUG_STATE_ACTIVE: |
368 | hrtimer_cancel(timer); |
369 | debug_object_init(timer, &hrtimer_debug_descr); |
370 | return 1; |
371 | default: |
372 | return 0; |
373 | } |
374 | } |
375 | |
376 | /* |
377 | * fixup_activate is called when: |
378 | * - an active object is activated |
379 | * - an unknown object is activated (might be a statically initialized object) |
380 | */ |
381 | static int hrtimer_fixup_activate(void *addr, enum debug_obj_state state) |
382 | { |
383 | switch (state) { |
384 | |
385 | case ODEBUG_STATE_NOTAVAILABLE: |
386 | WARN_ON_ONCE(1); |
387 | return 0; |
388 | |
389 | case ODEBUG_STATE_ACTIVE: |
390 | WARN_ON(1); |
391 | |
392 | default: |
393 | return 0; |
394 | } |
395 | } |
396 | |
397 | /* |
398 | * fixup_free is called when: |
399 | * - an active object is freed |
400 | */ |
401 | static int hrtimer_fixup_free(void *addr, enum debug_obj_state state) |
402 | { |
403 | struct hrtimer *timer = addr; |
404 | |
405 | switch (state) { |
406 | case ODEBUG_STATE_ACTIVE: |
407 | hrtimer_cancel(timer); |
408 | debug_object_free(timer, &hrtimer_debug_descr); |
409 | return 1; |
410 | default: |
411 | return 0; |
412 | } |
413 | } |
414 | |
415 | static struct debug_obj_descr hrtimer_debug_descr = { |
416 | .name = "hrtimer", |
417 | .debug_hint = hrtimer_debug_hint, |
418 | .fixup_init = hrtimer_fixup_init, |
419 | .fixup_activate = hrtimer_fixup_activate, |
420 | .fixup_free = hrtimer_fixup_free, |
421 | }; |
422 | |
423 | static inline void debug_hrtimer_init(struct hrtimer *timer) |
424 | { |
425 | debug_object_init(timer, &hrtimer_debug_descr); |
426 | } |
427 | |
428 | static inline void debug_hrtimer_activate(struct hrtimer *timer) |
429 | { |
430 | debug_object_activate(timer, &hrtimer_debug_descr); |
431 | } |
432 | |
433 | static inline void debug_hrtimer_deactivate(struct hrtimer *timer) |
434 | { |
435 | debug_object_deactivate(timer, &hrtimer_debug_descr); |
436 | } |
437 | |
438 | static inline void debug_hrtimer_free(struct hrtimer *timer) |
439 | { |
440 | debug_object_free(timer, &hrtimer_debug_descr); |
441 | } |
442 | |
443 | static void __hrtimer_init(struct hrtimer *timer, clockid_t clock_id, |
444 | enum hrtimer_mode mode); |
445 | |
446 | void hrtimer_init_on_stack(struct hrtimer *timer, clockid_t clock_id, |
447 | enum hrtimer_mode mode) |
448 | { |
449 | debug_object_init_on_stack(timer, &hrtimer_debug_descr); |
450 | __hrtimer_init(timer, clock_id, mode); |
451 | } |
452 | EXPORT_SYMBOL_GPL(hrtimer_init_on_stack); |
453 | |
454 | void destroy_hrtimer_on_stack(struct hrtimer *timer) |
455 | { |
456 | debug_object_free(timer, &hrtimer_debug_descr); |
457 | } |
458 | |
459 | #else |
460 | static inline void debug_hrtimer_init(struct hrtimer *timer) { } |
461 | static inline void debug_hrtimer_activate(struct hrtimer *timer) { } |
462 | static inline void debug_hrtimer_deactivate(struct hrtimer *timer) { } |
463 | #endif |
464 | |
465 | static inline void |
466 | debug_init(struct hrtimer *timer, clockid_t clockid, |
467 | enum hrtimer_mode mode) |
468 | { |
469 | debug_hrtimer_init(timer); |
470 | trace_hrtimer_init(timer, clockid, mode); |
471 | } |
472 | |
473 | static inline void debug_activate(struct hrtimer *timer) |
474 | { |
475 | debug_hrtimer_activate(timer); |
476 | trace_hrtimer_start(timer); |
477 | } |
478 | |
479 | static inline void debug_deactivate(struct hrtimer *timer) |
480 | { |
481 | debug_hrtimer_deactivate(timer); |
482 | trace_hrtimer_cancel(timer); |
483 | } |
484 | |
485 | /* High resolution timer related functions */ |
486 | #ifdef CONFIG_HIGH_RES_TIMERS |
487 | |
488 | /* |
489 | * High resolution timer enabled ? |
490 | */ |
491 | static int hrtimer_hres_enabled __read_mostly = 1; |
492 | |
493 | /* |
494 | * Enable / Disable high resolution mode |
495 | */ |
496 | static int __init setup_hrtimer_hres(char *str) |
497 | { |
498 | if (!strcmp(str, "off")) |
499 | hrtimer_hres_enabled = 0; |
500 | else if (!strcmp(str, "on")) |
501 | hrtimer_hres_enabled = 1; |
502 | else |
503 | return 0; |
504 | return 1; |
505 | } |
506 | |
507 | __setup("highres=", setup_hrtimer_hres); |
508 | |
509 | /* |
510 | * hrtimer_high_res_enabled - query, if the highres mode is enabled |
511 | */ |
512 | static inline int hrtimer_is_hres_enabled(void) |
513 | { |
514 | return hrtimer_hres_enabled; |
515 | } |
516 | |
517 | /* |
518 | * Is the high resolution mode active ? |
519 | */ |
520 | static inline int hrtimer_hres_active(void) |
521 | { |
522 | return __this_cpu_read(hrtimer_bases.hres_active); |
523 | } |
524 | |
525 | /* |
526 | * Reprogram the event source with checking both queues for the |
527 | * next event |
528 | * Called with interrupts disabled and base->lock held |
529 | */ |
530 | static void |
531 | hrtimer_force_reprogram(struct hrtimer_cpu_base *cpu_base, int skip_equal) |
532 | { |
533 | int i; |
534 | struct hrtimer_clock_base *base = cpu_base->clock_base; |
535 | ktime_t expires, expires_next; |
536 | |
537 | expires_next.tv64 = KTIME_MAX; |
538 | |
539 | for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++, base++) { |
540 | struct hrtimer *timer; |
541 | struct timerqueue_node *next; |
542 | |
543 | next = timerqueue_getnext(&base->active); |
544 | if (!next) |
545 | continue; |
546 | timer = container_of(next, struct hrtimer, node); |
547 | |
548 | expires = ktime_sub(hrtimer_get_expires(timer), base->offset); |
549 | /* |
550 | * clock_was_set() has changed base->offset so the |
551 | * result might be negative. Fix it up to prevent a |
552 | * false positive in clockevents_program_event() |
553 | */ |
554 | if (expires.tv64 < 0) |
555 | expires.tv64 = 0; |
556 | if (expires.tv64 < expires_next.tv64) |
557 | expires_next = expires; |
558 | } |
559 | |
560 | if (skip_equal && expires_next.tv64 == cpu_base->expires_next.tv64) |
561 | return; |
562 | |
563 | cpu_base->expires_next.tv64 = expires_next.tv64; |
564 | |
565 | if (cpu_base->expires_next.tv64 != KTIME_MAX) |
566 | tick_program_event(cpu_base->expires_next, 1); |
567 | } |
568 | |
569 | /* |
570 | * Shared reprogramming for clock_realtime and clock_monotonic |
571 | * |
572 | * When a timer is enqueued and expires earlier than the already enqueued |
573 | * timers, we have to check, whether it expires earlier than the timer for |
574 | * which the clock event device was armed. |
575 | * |
576 | * Called with interrupts disabled and base->cpu_base.lock held |
577 | */ |
578 | static int hrtimer_reprogram(struct hrtimer *timer, |
579 | struct hrtimer_clock_base *base) |
580 | { |
581 | struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases); |
582 | ktime_t expires = ktime_sub(hrtimer_get_expires(timer), base->offset); |
583 | int res; |
584 | |
585 | WARN_ON_ONCE(hrtimer_get_expires_tv64(timer) < 0); |
586 | |
587 | /* |
588 | * When the callback is running, we do not reprogram the clock event |
589 | * device. The timer callback is either running on a different CPU or |
590 | * the callback is executed in the hrtimer_interrupt context. The |
591 | * reprogramming is handled either by the softirq, which called the |
592 | * callback or at the end of the hrtimer_interrupt. |
593 | */ |
594 | if (hrtimer_callback_running(timer)) |
595 | return 0; |
596 | |
597 | /* |
598 | * CLOCK_REALTIME timer might be requested with an absolute |
599 | * expiry time which is less than base->offset. Nothing wrong |
600 | * about that, just avoid to call into the tick code, which |
601 | * has now objections against negative expiry values. |
602 | */ |
603 | if (expires.tv64 < 0) |
604 | return -ETIME; |
605 | |
606 | if (expires.tv64 >= cpu_base->expires_next.tv64) |
607 | return 0; |
608 | |
609 | /* |
610 | * If a hang was detected in the last timer interrupt then we |
611 | * do not schedule a timer which is earlier than the expiry |
612 | * which we enforced in the hang detection. We want the system |
613 | * to make progress. |
614 | */ |
615 | if (cpu_base->hang_detected) |
616 | return 0; |
617 | |
618 | /* |
619 | * Clockevents returns -ETIME, when the event was in the past. |
620 | */ |
621 | res = tick_program_event(expires, 0); |
622 | if (!IS_ERR_VALUE(res)) |
623 | cpu_base->expires_next = expires; |
624 | return res; |
625 | } |
626 | |
627 | /* |
628 | * Initialize the high resolution related parts of cpu_base |
629 | */ |
630 | static inline void hrtimer_init_hres(struct hrtimer_cpu_base *base) |
631 | { |
632 | base->expires_next.tv64 = KTIME_MAX; |
633 | base->hres_active = 0; |
634 | } |
635 | |
636 | /* |
637 | * When High resolution timers are active, try to reprogram. Note, that in case |
638 | * the state has HRTIMER_STATE_CALLBACK set, no reprogramming and no expiry |
639 | * check happens. The timer gets enqueued into the rbtree. The reprogramming |
640 | * and expiry check is done in the hrtimer_interrupt or in the softirq. |
641 | */ |
642 | static inline int hrtimer_enqueue_reprogram(struct hrtimer *timer, |
643 | struct hrtimer_clock_base *base, |
644 | int wakeup) |
645 | { |
646 | if (base->cpu_base->hres_active && hrtimer_reprogram(timer, base)) { |
647 | if (wakeup) { |
648 | raw_spin_unlock(&base->cpu_base->lock); |
649 | raise_softirq_irqoff(HRTIMER_SOFTIRQ); |
650 | raw_spin_lock(&base->cpu_base->lock); |
651 | } else |
652 | __raise_softirq_irqoff(HRTIMER_SOFTIRQ); |
653 | |
654 | return 1; |
655 | } |
656 | |
657 | return 0; |
658 | } |
659 | |
660 | static inline ktime_t hrtimer_update_base(struct hrtimer_cpu_base *base) |
661 | { |
662 | ktime_t *offs_real = &base->clock_base[HRTIMER_BASE_REALTIME].offset; |
663 | ktime_t *offs_boot = &base->clock_base[HRTIMER_BASE_BOOTTIME].offset; |
664 | |
665 | return ktime_get_update_offsets(offs_real, offs_boot); |
666 | } |
667 | |
668 | /* |
669 | * Retrigger next event is called after clock was set |
670 | * |
671 | * Called with interrupts disabled via on_each_cpu() |
672 | */ |
673 | static void retrigger_next_event(void *arg) |
674 | { |
675 | struct hrtimer_cpu_base *base = &__get_cpu_var(hrtimer_bases); |
676 | |
677 | if (!hrtimer_hres_active()) |
678 | return; |
679 | |
680 | raw_spin_lock(&base->lock); |
681 | hrtimer_update_base(base); |
682 | hrtimer_force_reprogram(base, 0); |
683 | raw_spin_unlock(&base->lock); |
684 | } |
685 | |
686 | /* |
687 | * Switch to high resolution mode |
688 | */ |
689 | static int hrtimer_switch_to_hres(void) |
690 | { |
691 | int i, cpu = smp_processor_id(); |
692 | struct hrtimer_cpu_base *base = &per_cpu(hrtimer_bases, cpu); |
693 | unsigned long flags; |
694 | |
695 | if (base->hres_active) |
696 | return 1; |
697 | |
698 | local_irq_save(flags); |
699 | |
700 | if (tick_init_highres()) { |
701 | local_irq_restore(flags); |
702 | printk(KERN_WARNING "Could not switch to high resolution " |
703 | "mode on CPU %d\n", cpu); |
704 | return 0; |
705 | } |
706 | base->hres_active = 1; |
707 | for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) |
708 | base->clock_base[i].resolution = KTIME_HIGH_RES; |
709 | |
710 | tick_setup_sched_timer(); |
711 | /* "Retrigger" the interrupt to get things going */ |
712 | retrigger_next_event(NULL); |
713 | local_irq_restore(flags); |
714 | return 1; |
715 | } |
716 | |
717 | /* |
718 | * Called from timekeeping code to reprogramm the hrtimer interrupt |
719 | * device. If called from the timer interrupt context we defer it to |
720 | * softirq context. |
721 | */ |
722 | void clock_was_set_delayed(void) |
723 | { |
724 | struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases); |
725 | |
726 | cpu_base->clock_was_set = 1; |
727 | __raise_softirq_irqoff(HRTIMER_SOFTIRQ); |
728 | } |
729 | |
730 | #else |
731 | |
732 | static inline int hrtimer_hres_active(void) { return 0; } |
733 | static inline int hrtimer_is_hres_enabled(void) { return 0; } |
734 | static inline int hrtimer_switch_to_hres(void) { return 0; } |
735 | static inline void |
736 | hrtimer_force_reprogram(struct hrtimer_cpu_base *base, int skip_equal) { } |
737 | static inline int hrtimer_enqueue_reprogram(struct hrtimer *timer, |
738 | struct hrtimer_clock_base *base, |
739 | int wakeup) |
740 | { |
741 | return 0; |
742 | } |
743 | static inline void hrtimer_init_hres(struct hrtimer_cpu_base *base) { } |
744 | static inline void retrigger_next_event(void *arg) { } |
745 | |
746 | #endif /* CONFIG_HIGH_RES_TIMERS */ |
747 | |
748 | /* |
749 | * Clock realtime was set |
750 | * |
751 | * Change the offset of the realtime clock vs. the monotonic |
752 | * clock. |
753 | * |
754 | * We might have to reprogram the high resolution timer interrupt. On |
755 | * SMP we call the architecture specific code to retrigger _all_ high |
756 | * resolution timer interrupts. On UP we just disable interrupts and |
757 | * call the high resolution interrupt code. |
758 | */ |
759 | void clock_was_set(void) |
760 | { |
761 | #ifdef CONFIG_HIGH_RES_TIMERS |
762 | /* Retrigger the CPU local events everywhere */ |
763 | on_each_cpu(retrigger_next_event, NULL, 1); |
764 | #endif |
765 | timerfd_clock_was_set(); |
766 | } |
767 | |
768 | /* |
769 | * During resume we might have to reprogram the high resolution timer |
770 | * interrupt (on the local CPU): |
771 | */ |
772 | void hrtimers_resume(void) |
773 | { |
774 | WARN_ONCE(!irqs_disabled(), |
775 | KERN_INFO "hrtimers_resume() called with IRQs enabled!"); |
776 | |
777 | retrigger_next_event(NULL); |
778 | timerfd_clock_was_set(); |
779 | } |
780 | |
781 | static inline void timer_stats_hrtimer_set_start_info(struct hrtimer *timer) |
782 | { |
783 | #ifdef CONFIG_TIMER_STATS |
784 | if (timer->start_site) |
785 | return; |
786 | timer->start_site = __builtin_return_address(0); |
787 | memcpy(timer->start_comm, current->comm, TASK_COMM_LEN); |
788 | timer->start_pid = current->pid; |
789 | #endif |
790 | } |
791 | |
792 | static inline void timer_stats_hrtimer_clear_start_info(struct hrtimer *timer) |
793 | { |
794 | #ifdef CONFIG_TIMER_STATS |
795 | timer->start_site = NULL; |
796 | #endif |
797 | } |
798 | |
799 | static inline void timer_stats_account_hrtimer(struct hrtimer *timer) |
800 | { |
801 | #ifdef CONFIG_TIMER_STATS |
802 | if (likely(!timer_stats_active)) |
803 | return; |
804 | timer_stats_update_stats(timer, timer->start_pid, timer->start_site, |
805 | timer->function, timer->start_comm, 0); |
806 | #endif |
807 | } |
808 | |
809 | /* |
810 | * Counterpart to lock_hrtimer_base above: |
811 | */ |
812 | static inline |
813 | void unlock_hrtimer_base(const struct hrtimer *timer, unsigned long *flags) |
814 | { |
815 | raw_spin_unlock_irqrestore(&timer->base->cpu_base->lock, *flags); |
816 | } |
817 | |
818 | /** |
819 | * hrtimer_forward - forward the timer expiry |
820 | * @timer: hrtimer to forward |
821 | * @now: forward past this time |
822 | * @interval: the interval to forward |
823 | * |
824 | * Forward the timer expiry so it will expire in the future. |
825 | * Returns the number of overruns. |
826 | */ |
827 | u64 hrtimer_forward(struct hrtimer *timer, ktime_t now, ktime_t interval) |
828 | { |
829 | u64 orun = 1; |
830 | ktime_t delta; |
831 | |
832 | delta = ktime_sub(now, hrtimer_get_expires(timer)); |
833 | |
834 | if (delta.tv64 < 0) |
835 | return 0; |
836 | |
837 | if (interval.tv64 < timer->base->resolution.tv64) |
838 | interval.tv64 = timer->base->resolution.tv64; |
839 | |
840 | if (unlikely(delta.tv64 >= interval.tv64)) { |
841 | s64 incr = ktime_to_ns(interval); |
842 | |
843 | orun = ktime_divns(delta, incr); |
844 | hrtimer_add_expires_ns(timer, incr * orun); |
845 | if (hrtimer_get_expires_tv64(timer) > now.tv64) |
846 | return orun; |
847 | /* |
848 | * This (and the ktime_add() below) is the |
849 | * correction for exact: |
850 | */ |
851 | orun++; |
852 | } |
853 | hrtimer_add_expires(timer, interval); |
854 | |
855 | return orun; |
856 | } |
857 | EXPORT_SYMBOL_GPL(hrtimer_forward); |
858 | |
859 | /* |
860 | * enqueue_hrtimer - internal function to (re)start a timer |
861 | * |
862 | * The timer is inserted in expiry order. Insertion into the |
863 | * red black tree is O(log(n)). Must hold the base lock. |
864 | * |
865 | * Returns 1 when the new timer is the leftmost timer in the tree. |
866 | */ |
867 | static int enqueue_hrtimer(struct hrtimer *timer, |
868 | struct hrtimer_clock_base *base) |
869 | { |
870 | debug_activate(timer); |
871 | |
872 | timerqueue_add(&base->active, &timer->node); |
873 | base->cpu_base->active_bases |= 1 << base->index; |
874 | |
875 | /* |
876 | * HRTIMER_STATE_ENQUEUED is or'ed to the current state to preserve the |
877 | * state of a possibly running callback. |
878 | */ |
879 | timer->state |= HRTIMER_STATE_ENQUEUED; |
880 | |
881 | return (&timer->node == base->active.next); |
882 | } |
883 | |
884 | /* |
885 | * __remove_hrtimer - internal function to remove a timer |
886 | * |
887 | * Caller must hold the base lock. |
888 | * |
889 | * High resolution timer mode reprograms the clock event device when the |
890 | * timer is the one which expires next. The caller can disable this by setting |
891 | * reprogram to zero. This is useful, when the context does a reprogramming |
892 | * anyway (e.g. timer interrupt) |
893 | */ |
894 | static void __remove_hrtimer(struct hrtimer *timer, |
895 | struct hrtimer_clock_base *base, |
896 | unsigned long newstate, int reprogram) |
897 | { |
898 | struct timerqueue_node *next_timer; |
899 | if (!(timer->state & HRTIMER_STATE_ENQUEUED)) |
900 | goto out; |
901 | |
902 | next_timer = timerqueue_getnext(&base->active); |
903 | timerqueue_del(&base->active, &timer->node); |
904 | if (&timer->node == next_timer) { |
905 | #ifdef CONFIG_HIGH_RES_TIMERS |
906 | /* Reprogram the clock event device. if enabled */ |
907 | if (reprogram && hrtimer_hres_active()) { |
908 | ktime_t expires; |
909 | |
910 | expires = ktime_sub(hrtimer_get_expires(timer), |
911 | base->offset); |
912 | if (base->cpu_base->expires_next.tv64 == expires.tv64) |
913 | hrtimer_force_reprogram(base->cpu_base, 1); |
914 | } |
915 | #endif |
916 | } |
917 | if (!timerqueue_getnext(&base->active)) |
918 | base->cpu_base->active_bases &= ~(1 << base->index); |
919 | out: |
920 | timer->state = newstate; |
921 | } |
922 | |
923 | /* |
924 | * remove hrtimer, called with base lock held |
925 | */ |
926 | static inline int |
927 | remove_hrtimer(struct hrtimer *timer, struct hrtimer_clock_base *base) |
928 | { |
929 | if (hrtimer_is_queued(timer)) { |
930 | unsigned long state; |
931 | int reprogram; |
932 | |
933 | /* |
934 | * Remove the timer and force reprogramming when high |
935 | * resolution mode is active and the timer is on the current |
936 | * CPU. If we remove a timer on another CPU, reprogramming is |
937 | * skipped. The interrupt event on this CPU is fired and |
938 | * reprogramming happens in the interrupt handler. This is a |
939 | * rare case and less expensive than a smp call. |
940 | */ |
941 | debug_deactivate(timer); |
942 | timer_stats_hrtimer_clear_start_info(timer); |
943 | reprogram = base->cpu_base == &__get_cpu_var(hrtimer_bases); |
944 | /* |
945 | * We must preserve the CALLBACK state flag here, |
946 | * otherwise we could move the timer base in |
947 | * switch_hrtimer_base. |
948 | */ |
949 | state = timer->state & HRTIMER_STATE_CALLBACK; |
950 | __remove_hrtimer(timer, base, state, reprogram); |
951 | return 1; |
952 | } |
953 | return 0; |
954 | } |
955 | |
956 | int __hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim, |
957 | unsigned long delta_ns, const enum hrtimer_mode mode, |
958 | int wakeup) |
959 | { |
960 | struct hrtimer_clock_base *base, *new_base; |
961 | unsigned long flags; |
962 | int ret, leftmost; |
963 | |
964 | base = lock_hrtimer_base(timer, &flags); |
965 | |
966 | /* Remove an active timer from the queue: */ |
967 | ret = remove_hrtimer(timer, base); |
968 | |
969 | /* Switch the timer base, if necessary: */ |
970 | new_base = switch_hrtimer_base(timer, base, mode & HRTIMER_MODE_PINNED); |
971 | |
972 | if (mode & HRTIMER_MODE_REL) { |
973 | tim = ktime_add_safe(tim, new_base->get_time()); |
974 | /* |
975 | * CONFIG_TIME_LOW_RES is a temporary way for architectures |
976 | * to signal that they simply return xtime in |
977 | * do_gettimeoffset(). In this case we want to round up by |
978 | * resolution when starting a relative timer, to avoid short |
979 | * timeouts. This will go away with the GTOD framework. |
980 | */ |
981 | #ifdef CONFIG_TIME_LOW_RES |
982 | tim = ktime_add_safe(tim, base->resolution); |
983 | #endif |
984 | } |
985 | |
986 | hrtimer_set_expires_range_ns(timer, tim, delta_ns); |
987 | |
988 | timer_stats_hrtimer_set_start_info(timer); |
989 | |
990 | leftmost = enqueue_hrtimer(timer, new_base); |
991 | |
992 | /* |
993 | * Only allow reprogramming if the new base is on this CPU. |
994 | * (it might still be on another CPU if the timer was pending) |
995 | * |
996 | * XXX send_remote_softirq() ? |
997 | */ |
998 | if (leftmost && new_base->cpu_base == &__get_cpu_var(hrtimer_bases)) |
999 | hrtimer_enqueue_reprogram(timer, new_base, wakeup); |
1000 | |
1001 | unlock_hrtimer_base(timer, &flags); |
1002 | |
1003 | return ret; |
1004 | } |
1005 | |
1006 | /** |
1007 | * hrtimer_start_range_ns - (re)start an hrtimer on the current CPU |
1008 | * @timer: the timer to be added |
1009 | * @tim: expiry time |
1010 | * @delta_ns: "slack" range for the timer |
1011 | * @mode: expiry mode: absolute (HRTIMER_ABS) or relative (HRTIMER_REL) |
1012 | * |
1013 | * Returns: |
1014 | * 0 on success |
1015 | * 1 when the timer was active |
1016 | */ |
1017 | int hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim, |
1018 | unsigned long delta_ns, const enum hrtimer_mode mode) |
1019 | { |
1020 | return __hrtimer_start_range_ns(timer, tim, delta_ns, mode, 1); |
1021 | } |
1022 | EXPORT_SYMBOL_GPL(hrtimer_start_range_ns); |
1023 | |
1024 | /** |
1025 | * hrtimer_start - (re)start an hrtimer on the current CPU |
1026 | * @timer: the timer to be added |
1027 | * @tim: expiry time |
1028 | * @mode: expiry mode: absolute (HRTIMER_ABS) or relative (HRTIMER_REL) |
1029 | * |
1030 | * Returns: |
1031 | * 0 on success |
1032 | * 1 when the timer was active |
1033 | */ |
1034 | int |
1035 | hrtimer_start(struct hrtimer *timer, ktime_t tim, const enum hrtimer_mode mode) |
1036 | { |
1037 | return __hrtimer_start_range_ns(timer, tim, 0, mode, 1); |
1038 | } |
1039 | EXPORT_SYMBOL_GPL(hrtimer_start); |
1040 | |
1041 | |
1042 | /** |
1043 | * hrtimer_try_to_cancel - try to deactivate a timer |
1044 | * @timer: hrtimer to stop |
1045 | * |
1046 | * Returns: |
1047 | * 0 when the timer was not active |
1048 | * 1 when the timer was active |
1049 | * -1 when the timer is currently excuting the callback function and |
1050 | * cannot be stopped |
1051 | */ |
1052 | int hrtimer_try_to_cancel(struct hrtimer *timer) |
1053 | { |
1054 | struct hrtimer_clock_base *base; |
1055 | unsigned long flags; |
1056 | int ret = -1; |
1057 | |
1058 | base = lock_hrtimer_base(timer, &flags); |
1059 | |
1060 | if (!hrtimer_callback_running(timer)) |
1061 | ret = remove_hrtimer(timer, base); |
1062 | |
1063 | unlock_hrtimer_base(timer, &flags); |
1064 | |
1065 | return ret; |
1066 | |
1067 | } |
1068 | EXPORT_SYMBOL_GPL(hrtimer_try_to_cancel); |
1069 | |
1070 | /** |
1071 | * hrtimer_cancel - cancel a timer and wait for the handler to finish. |
1072 | * @timer: the timer to be cancelled |
1073 | * |
1074 | * Returns: |
1075 | * 0 when the timer was not active |
1076 | * 1 when the timer was active |
1077 | */ |
1078 | int hrtimer_cancel(struct hrtimer *timer) |
1079 | { |
1080 | for (;;) { |
1081 | int ret = hrtimer_try_to_cancel(timer); |
1082 | |
1083 | if (ret >= 0) |
1084 | return ret; |
1085 | cpu_relax(); |
1086 | } |
1087 | } |
1088 | EXPORT_SYMBOL_GPL(hrtimer_cancel); |
1089 | |
1090 | /** |
1091 | * hrtimer_get_remaining - get remaining time for the timer |
1092 | * @timer: the timer to read |
1093 | */ |
1094 | ktime_t hrtimer_get_remaining(const struct hrtimer *timer) |
1095 | { |
1096 | unsigned long flags; |
1097 | ktime_t rem; |
1098 | |
1099 | lock_hrtimer_base(timer, &flags); |
1100 | rem = hrtimer_expires_remaining(timer); |
1101 | unlock_hrtimer_base(timer, &flags); |
1102 | |
1103 | return rem; |
1104 | } |
1105 | EXPORT_SYMBOL_GPL(hrtimer_get_remaining); |
1106 | |
1107 | #ifdef CONFIG_NO_HZ |
1108 | /** |
1109 | * hrtimer_get_next_event - get the time until next expiry event |
1110 | * |
1111 | * Returns the delta to the next expiry event or KTIME_MAX if no timer |
1112 | * is pending. |
1113 | */ |
1114 | ktime_t hrtimer_get_next_event(void) |
1115 | { |
1116 | struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases); |
1117 | struct hrtimer_clock_base *base = cpu_base->clock_base; |
1118 | ktime_t delta, mindelta = { .tv64 = KTIME_MAX }; |
1119 | unsigned long flags; |
1120 | int i; |
1121 | |
1122 | raw_spin_lock_irqsave(&cpu_base->lock, flags); |
1123 | |
1124 | if (!hrtimer_hres_active()) { |
1125 | for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++, base++) { |
1126 | struct hrtimer *timer; |
1127 | struct timerqueue_node *next; |
1128 | |
1129 | next = timerqueue_getnext(&base->active); |
1130 | if (!next) |
1131 | continue; |
1132 | |
1133 | timer = container_of(next, struct hrtimer, node); |
1134 | delta.tv64 = hrtimer_get_expires_tv64(timer); |
1135 | delta = ktime_sub(delta, base->get_time()); |
1136 | if (delta.tv64 < mindelta.tv64) |
1137 | mindelta.tv64 = delta.tv64; |
1138 | } |
1139 | } |
1140 | |
1141 | raw_spin_unlock_irqrestore(&cpu_base->lock, flags); |
1142 | |
1143 | if (mindelta.tv64 < 0) |
1144 | mindelta.tv64 = 0; |
1145 | return mindelta; |
1146 | } |
1147 | #endif |
1148 | |
1149 | static void __hrtimer_init(struct hrtimer *timer, clockid_t clock_id, |
1150 | enum hrtimer_mode mode) |
1151 | { |
1152 | struct hrtimer_cpu_base *cpu_base; |
1153 | int base; |
1154 | |
1155 | memset(timer, 0, sizeof(struct hrtimer)); |
1156 | |
1157 | cpu_base = &__raw_get_cpu_var(hrtimer_bases); |
1158 | |
1159 | if (clock_id == CLOCK_REALTIME && mode != HRTIMER_MODE_ABS) |
1160 | clock_id = CLOCK_MONOTONIC; |
1161 | |
1162 | base = hrtimer_clockid_to_base(clock_id); |
1163 | timer->base = &cpu_base->clock_base[base]; |
1164 | timerqueue_init(&timer->node); |
1165 | |
1166 | #ifdef CONFIG_TIMER_STATS |
1167 | timer->start_site = NULL; |
1168 | timer->start_pid = -1; |
1169 | memset(timer->start_comm, 0, TASK_COMM_LEN); |
1170 | #endif |
1171 | } |
1172 | |
1173 | /** |
1174 | * hrtimer_init - initialize a timer to the given clock |
1175 | * @timer: the timer to be initialized |
1176 | * @clock_id: the clock to be used |
1177 | * @mode: timer mode abs/rel |
1178 | */ |
1179 | void hrtimer_init(struct hrtimer *timer, clockid_t clock_id, |
1180 | enum hrtimer_mode mode) |
1181 | { |
1182 | debug_init(timer, clock_id, mode); |
1183 | __hrtimer_init(timer, clock_id, mode); |
1184 | } |
1185 | EXPORT_SYMBOL_GPL(hrtimer_init); |
1186 | |
1187 | /** |
1188 | * hrtimer_get_res - get the timer resolution for a clock |
1189 | * @which_clock: which clock to query |
1190 | * @tp: pointer to timespec variable to store the resolution |
1191 | * |
1192 | * Store the resolution of the clock selected by @which_clock in the |
1193 | * variable pointed to by @tp. |
1194 | */ |
1195 | int hrtimer_get_res(const clockid_t which_clock, struct timespec *tp) |
1196 | { |
1197 | struct hrtimer_cpu_base *cpu_base; |
1198 | int base = hrtimer_clockid_to_base(which_clock); |
1199 | |
1200 | cpu_base = &__raw_get_cpu_var(hrtimer_bases); |
1201 | *tp = ktime_to_timespec(cpu_base->clock_base[base].resolution); |
1202 | |
1203 | return 0; |
1204 | } |
1205 | EXPORT_SYMBOL_GPL(hrtimer_get_res); |
1206 | |
1207 | static void __run_hrtimer(struct hrtimer *timer, ktime_t *now) |
1208 | { |
1209 | struct hrtimer_clock_base *base = timer->base; |
1210 | struct hrtimer_cpu_base *cpu_base = base->cpu_base; |
1211 | enum hrtimer_restart (*fn)(struct hrtimer *); |
1212 | int restart; |
1213 | |
1214 | WARN_ON(!irqs_disabled()); |
1215 | |
1216 | debug_deactivate(timer); |
1217 | __remove_hrtimer(timer, base, HRTIMER_STATE_CALLBACK, 0); |
1218 | timer_stats_account_hrtimer(timer); |
1219 | fn = timer->function; |
1220 | |
1221 | /* |
1222 | * Because we run timers from hardirq context, there is no chance |
1223 | * they get migrated to another cpu, therefore its safe to unlock |
1224 | * the timer base. |
1225 | */ |
1226 | raw_spin_unlock(&cpu_base->lock); |
1227 | trace_hrtimer_expire_entry(timer, now); |
1228 | restart = fn(timer); |
1229 | trace_hrtimer_expire_exit(timer); |
1230 | raw_spin_lock(&cpu_base->lock); |
1231 | |
1232 | /* |
1233 | * Note: We clear the CALLBACK bit after enqueue_hrtimer and |
1234 | * we do not reprogramm the event hardware. Happens either in |
1235 | * hrtimer_start_range_ns() or in hrtimer_interrupt() |
1236 | */ |
1237 | if (restart != HRTIMER_NORESTART) { |
1238 | BUG_ON(timer->state != HRTIMER_STATE_CALLBACK); |
1239 | enqueue_hrtimer(timer, base); |
1240 | } |
1241 | |
1242 | WARN_ON_ONCE(!(timer->state & HRTIMER_STATE_CALLBACK)); |
1243 | |
1244 | timer->state &= ~HRTIMER_STATE_CALLBACK; |
1245 | } |
1246 | |
1247 | #ifdef CONFIG_HIGH_RES_TIMERS |
1248 | |
1249 | /* |
1250 | * High resolution timer interrupt |
1251 | * Called with interrupts disabled |
1252 | */ |
1253 | void hrtimer_interrupt(struct clock_event_device *dev) |
1254 | { |
1255 | struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases); |
1256 | ktime_t expires_next, now, entry_time, delta; |
1257 | int i, retries = 0; |
1258 | |
1259 | BUG_ON(!cpu_base->hres_active); |
1260 | cpu_base->nr_events++; |
1261 | dev->next_event.tv64 = KTIME_MAX; |
1262 | |
1263 | raw_spin_lock(&cpu_base->lock); |
1264 | entry_time = now = hrtimer_update_base(cpu_base); |
1265 | retry: |
1266 | expires_next.tv64 = KTIME_MAX; |
1267 | /* |
1268 | * We set expires_next to KTIME_MAX here with cpu_base->lock |
1269 | * held to prevent that a timer is enqueued in our queue via |
1270 | * the migration code. This does not affect enqueueing of |
1271 | * timers which run their callback and need to be requeued on |
1272 | * this CPU. |
1273 | */ |
1274 | cpu_base->expires_next.tv64 = KTIME_MAX; |
1275 | |
1276 | for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) { |
1277 | struct hrtimer_clock_base *base; |
1278 | struct timerqueue_node *node; |
1279 | ktime_t basenow; |
1280 | |
1281 | if (!(cpu_base->active_bases & (1 << i))) |
1282 | continue; |
1283 | |
1284 | base = cpu_base->clock_base + i; |
1285 | basenow = ktime_add(now, base->offset); |
1286 | |
1287 | while ((node = timerqueue_getnext(&base->active))) { |
1288 | struct hrtimer *timer; |
1289 | |
1290 | timer = container_of(node, struct hrtimer, node); |
1291 | |
1292 | /* |
1293 | * The immediate goal for using the softexpires is |
1294 | * minimizing wakeups, not running timers at the |
1295 | * earliest interrupt after their soft expiration. |
1296 | * This allows us to avoid using a Priority Search |
1297 | * Tree, which can answer a stabbing querry for |
1298 | * overlapping intervals and instead use the simple |
1299 | * BST we already have. |
1300 | * We don't add extra wakeups by delaying timers that |
1301 | * are right-of a not yet expired timer, because that |
1302 | * timer will have to trigger a wakeup anyway. |
1303 | */ |
1304 | |
1305 | if (basenow.tv64 < hrtimer_get_softexpires_tv64(timer)) { |
1306 | ktime_t expires; |
1307 | |
1308 | expires = ktime_sub(hrtimer_get_expires(timer), |
1309 | base->offset); |
1310 | if (expires.tv64 < expires_next.tv64) |
1311 | expires_next = expires; |
1312 | break; |
1313 | } |
1314 | |
1315 | __run_hrtimer(timer, &basenow); |
1316 | } |
1317 | } |
1318 | |
1319 | /* |
1320 | * Store the new expiry value so the migration code can verify |
1321 | * against it. |
1322 | */ |
1323 | cpu_base->expires_next = expires_next; |
1324 | raw_spin_unlock(&cpu_base->lock); |
1325 | |
1326 | /* Reprogramming necessary ? */ |
1327 | if (expires_next.tv64 == KTIME_MAX || |
1328 | !tick_program_event(expires_next, 0)) { |
1329 | cpu_base->hang_detected = 0; |
1330 | return; |
1331 | } |
1332 | |
1333 | /* |
1334 | * The next timer was already expired due to: |
1335 | * - tracing |
1336 | * - long lasting callbacks |
1337 | * - being scheduled away when running in a VM |
1338 | * |
1339 | * We need to prevent that we loop forever in the hrtimer |
1340 | * interrupt routine. We give it 3 attempts to avoid |
1341 | * overreacting on some spurious event. |
1342 | * |
1343 | * Acquire base lock for updating the offsets and retrieving |
1344 | * the current time. |
1345 | */ |
1346 | raw_spin_lock(&cpu_base->lock); |
1347 | now = hrtimer_update_base(cpu_base); |
1348 | cpu_base->nr_retries++; |
1349 | if (++retries < 3) |
1350 | goto retry; |
1351 | /* |
1352 | * Give the system a chance to do something else than looping |
1353 | * here. We stored the entry time, so we know exactly how long |
1354 | * we spent here. We schedule the next event this amount of |
1355 | * time away. |
1356 | */ |
1357 | cpu_base->nr_hangs++; |
1358 | cpu_base->hang_detected = 1; |
1359 | raw_spin_unlock(&cpu_base->lock); |
1360 | delta = ktime_sub(now, entry_time); |
1361 | if (delta.tv64 > cpu_base->max_hang_time.tv64) |
1362 | cpu_base->max_hang_time = delta; |
1363 | /* |
1364 | * Limit it to a sensible value as we enforce a longer |
1365 | * delay. Give the CPU at least 100ms to catch up. |
1366 | */ |
1367 | if (delta.tv64 > 100 * NSEC_PER_MSEC) |
1368 | expires_next = ktime_add_ns(now, 100 * NSEC_PER_MSEC); |
1369 | else |
1370 | expires_next = ktime_add(now, delta); |
1371 | tick_program_event(expires_next, 1); |
1372 | printk_once(KERN_WARNING "hrtimer: interrupt took %llu ns\n", |
1373 | ktime_to_ns(delta)); |
1374 | } |
1375 | |
1376 | /* |
1377 | * local version of hrtimer_peek_ahead_timers() called with interrupts |
1378 | * disabled. |
1379 | */ |
1380 | static void __hrtimer_peek_ahead_timers(void) |
1381 | { |
1382 | struct tick_device *td; |
1383 | |
1384 | if (!hrtimer_hres_active()) |
1385 | return; |
1386 | |
1387 | td = &__get_cpu_var(tick_cpu_device); |
1388 | if (td && td->evtdev) |
1389 | hrtimer_interrupt(td->evtdev); |
1390 | } |
1391 | |
1392 | /** |
1393 | * hrtimer_peek_ahead_timers -- run soft-expired timers now |
1394 | * |
1395 | * hrtimer_peek_ahead_timers will peek at the timer queue of |
1396 | * the current cpu and check if there are any timers for which |
1397 | * the soft expires time has passed. If any such timers exist, |
1398 | * they are run immediately and then removed from the timer queue. |
1399 | * |
1400 | */ |
1401 | void hrtimer_peek_ahead_timers(void) |
1402 | { |
1403 | unsigned long flags; |
1404 | |
1405 | local_irq_save(flags); |
1406 | __hrtimer_peek_ahead_timers(); |
1407 | local_irq_restore(flags); |
1408 | } |
1409 | |
1410 | static void run_hrtimer_softirq(struct softirq_action *h) |
1411 | { |
1412 | struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases); |
1413 | |
1414 | if (cpu_base->clock_was_set) { |
1415 | cpu_base->clock_was_set = 0; |
1416 | clock_was_set(); |
1417 | } |
1418 | |
1419 | hrtimer_peek_ahead_timers(); |
1420 | } |
1421 | |
1422 | #else /* CONFIG_HIGH_RES_TIMERS */ |
1423 | |
1424 | static inline void __hrtimer_peek_ahead_timers(void) { } |
1425 | |
1426 | #endif /* !CONFIG_HIGH_RES_TIMERS */ |
1427 | |
1428 | /* |
1429 | * Called from timer softirq every jiffy, expire hrtimers: |
1430 | * |
1431 | * For HRT its the fall back code to run the softirq in the timer |
1432 | * softirq context in case the hrtimer initialization failed or has |
1433 | * not been done yet. |
1434 | */ |
1435 | void hrtimer_run_pending(void) |
1436 | { |
1437 | if (hrtimer_hres_active()) |
1438 | return; |
1439 | |
1440 | /* |
1441 | * This _is_ ugly: We have to check in the softirq context, |
1442 | * whether we can switch to highres and / or nohz mode. The |
1443 | * clocksource switch happens in the timer interrupt with |
1444 | * xtime_lock held. Notification from there only sets the |
1445 | * check bit in the tick_oneshot code, otherwise we might |
1446 | * deadlock vs. xtime_lock. |
1447 | */ |
1448 | if (tick_check_oneshot_change(!hrtimer_is_hres_enabled())) |
1449 | hrtimer_switch_to_hres(); |
1450 | } |
1451 | |
1452 | /* |
1453 | * Called from hardirq context every jiffy |
1454 | */ |
1455 | void hrtimer_run_queues(void) |
1456 | { |
1457 | struct timerqueue_node *node; |
1458 | struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases); |
1459 | struct hrtimer_clock_base *base; |
1460 | int index, gettime = 1; |
1461 | |
1462 | if (hrtimer_hres_active()) |
1463 | return; |
1464 | |
1465 | for (index = 0; index < HRTIMER_MAX_CLOCK_BASES; index++) { |
1466 | base = &cpu_base->clock_base[index]; |
1467 | if (!timerqueue_getnext(&base->active)) |
1468 | continue; |
1469 | |
1470 | if (gettime) { |
1471 | hrtimer_get_softirq_time(cpu_base); |
1472 | gettime = 0; |
1473 | } |
1474 | |
1475 | raw_spin_lock(&cpu_base->lock); |
1476 | |
1477 | while ((node = timerqueue_getnext(&base->active))) { |
1478 | struct hrtimer *timer; |
1479 | |
1480 | timer = container_of(node, struct hrtimer, node); |
1481 | if (base->softirq_time.tv64 <= |
1482 | hrtimer_get_expires_tv64(timer)) |
1483 | break; |
1484 | |
1485 | __run_hrtimer(timer, &base->softirq_time); |
1486 | } |
1487 | raw_spin_unlock(&cpu_base->lock); |
1488 | } |
1489 | } |
1490 | |
1491 | /* |
1492 | * Sleep related functions: |
1493 | */ |
1494 | static enum hrtimer_restart hrtimer_wakeup(struct hrtimer *timer) |
1495 | { |
1496 | struct hrtimer_sleeper *t = |
1497 | container_of(timer, struct hrtimer_sleeper, timer); |
1498 | struct task_struct *task = t->task; |
1499 | |
1500 | t->task = NULL; |
1501 | if (task) |
1502 | wake_up_process(task); |
1503 | |
1504 | return HRTIMER_NORESTART; |
1505 | } |
1506 | |
1507 | void hrtimer_init_sleeper(struct hrtimer_sleeper *sl, struct task_struct *task) |
1508 | { |
1509 | sl->timer.function = hrtimer_wakeup; |
1510 | sl->task = task; |
1511 | } |
1512 | EXPORT_SYMBOL_GPL(hrtimer_init_sleeper); |
1513 | |
1514 | static int __sched do_nanosleep(struct hrtimer_sleeper *t, enum hrtimer_mode mode) |
1515 | { |
1516 | hrtimer_init_sleeper(t, current); |
1517 | |
1518 | do { |
1519 | set_current_state(TASK_INTERRUPTIBLE); |
1520 | hrtimer_start_expires(&t->timer, mode); |
1521 | if (!hrtimer_active(&t->timer)) |
1522 | t->task = NULL; |
1523 | |
1524 | if (likely(t->task)) |
1525 | schedule(); |
1526 | |
1527 | hrtimer_cancel(&t->timer); |
1528 | mode = HRTIMER_MODE_ABS; |
1529 | |
1530 | } while (t->task && !signal_pending(current)); |
1531 | |
1532 | __set_current_state(TASK_RUNNING); |
1533 | |
1534 | return t->task == NULL; |
1535 | } |
1536 | |
1537 | static int update_rmtp(struct hrtimer *timer, struct timespec __user *rmtp) |
1538 | { |
1539 | struct timespec rmt; |
1540 | ktime_t rem; |
1541 | |
1542 | rem = hrtimer_expires_remaining(timer); |
1543 | if (rem.tv64 <= 0) |
1544 | return 0; |
1545 | rmt = ktime_to_timespec(rem); |
1546 | |
1547 | if (copy_to_user(rmtp, &rmt, sizeof(*rmtp))) |
1548 | return -EFAULT; |
1549 | |
1550 | return 1; |
1551 | } |
1552 | |
1553 | long __sched hrtimer_nanosleep_restart(struct restart_block *restart) |
1554 | { |
1555 | struct hrtimer_sleeper t; |
1556 | struct timespec __user *rmtp; |
1557 | int ret = 0; |
1558 | |
1559 | hrtimer_init_on_stack(&t.timer, restart->nanosleep.clockid, |
1560 | HRTIMER_MODE_ABS); |
1561 | hrtimer_set_expires_tv64(&t.timer, restart->nanosleep.expires); |
1562 | |
1563 | if (do_nanosleep(&t, HRTIMER_MODE_ABS)) |
1564 | goto out; |
1565 | |
1566 | rmtp = restart->nanosleep.rmtp; |
1567 | if (rmtp) { |
1568 | ret = update_rmtp(&t.timer, rmtp); |
1569 | if (ret <= 0) |
1570 | goto out; |
1571 | } |
1572 | |
1573 | /* The other values in restart are already filled in */ |
1574 | ret = -ERESTART_RESTARTBLOCK; |
1575 | out: |
1576 | destroy_hrtimer_on_stack(&t.timer); |
1577 | return ret; |
1578 | } |
1579 | |
1580 | long hrtimer_nanosleep(struct timespec *rqtp, struct timespec __user *rmtp, |
1581 | const enum hrtimer_mode mode, const clockid_t clockid) |
1582 | { |
1583 | struct restart_block *restart; |
1584 | struct hrtimer_sleeper t; |
1585 | int ret = 0; |
1586 | unsigned long slack; |
1587 | |
1588 | slack = current->timer_slack_ns; |
1589 | if (rt_task(current)) |
1590 | slack = 0; |
1591 | |
1592 | hrtimer_init_on_stack(&t.timer, clockid, mode); |
1593 | hrtimer_set_expires_range_ns(&t.timer, timespec_to_ktime(*rqtp), slack); |
1594 | if (do_nanosleep(&t, mode)) |
1595 | goto out; |
1596 | |
1597 | /* Absolute timers do not update the rmtp value and restart: */ |
1598 | if (mode == HRTIMER_MODE_ABS) { |
1599 | ret = -ERESTARTNOHAND; |
1600 | goto out; |
1601 | } |
1602 | |
1603 | if (rmtp) { |
1604 | ret = update_rmtp(&t.timer, rmtp); |
1605 | if (ret <= 0) |
1606 | goto out; |
1607 | } |
1608 | |
1609 | restart = ¤t_thread_info()->restart_block; |
1610 | restart->fn = hrtimer_nanosleep_restart; |
1611 | restart->nanosleep.clockid = t.timer.base->clockid; |
1612 | restart->nanosleep.rmtp = rmtp; |
1613 | restart->nanosleep.expires = hrtimer_get_expires_tv64(&t.timer); |
1614 | |
1615 | ret = -ERESTART_RESTARTBLOCK; |
1616 | out: |
1617 | destroy_hrtimer_on_stack(&t.timer); |
1618 | return ret; |
1619 | } |
1620 | |
1621 | SYSCALL_DEFINE2(nanosleep, struct timespec __user *, rqtp, |
1622 | struct timespec __user *, rmtp) |
1623 | { |
1624 | struct timespec tu; |
1625 | |
1626 | if (copy_from_user(&tu, rqtp, sizeof(tu))) |
1627 | return -EFAULT; |
1628 | |
1629 | if (!timespec_valid(&tu)) |
1630 | return -EINVAL; |
1631 | |
1632 | return hrtimer_nanosleep(&tu, rmtp, HRTIMER_MODE_REL, CLOCK_MONOTONIC); |
1633 | } |
1634 | |
1635 | /* |
1636 | * Functions related to boot-time initialization: |
1637 | */ |
1638 | static void __cpuinit init_hrtimers_cpu(int cpu) |
1639 | { |
1640 | struct hrtimer_cpu_base *cpu_base = &per_cpu(hrtimer_bases, cpu); |
1641 | int i; |
1642 | |
1643 | raw_spin_lock_init(&cpu_base->lock); |
1644 | |
1645 | for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) { |
1646 | cpu_base->clock_base[i].cpu_base = cpu_base; |
1647 | timerqueue_init_head(&cpu_base->clock_base[i].active); |
1648 | } |
1649 | |
1650 | hrtimer_init_hres(cpu_base); |
1651 | } |
1652 | |
1653 | #ifdef CONFIG_HOTPLUG_CPU |
1654 | |
1655 | static void migrate_hrtimer_list(struct hrtimer_clock_base *old_base, |
1656 | struct hrtimer_clock_base *new_base) |
1657 | { |
1658 | struct hrtimer *timer; |
1659 | struct timerqueue_node *node; |
1660 | |
1661 | while ((node = timerqueue_getnext(&old_base->active))) { |
1662 | timer = container_of(node, struct hrtimer, node); |
1663 | BUG_ON(hrtimer_callback_running(timer)); |
1664 | debug_deactivate(timer); |
1665 | |
1666 | /* |
1667 | * Mark it as STATE_MIGRATE not INACTIVE otherwise the |
1668 | * timer could be seen as !active and just vanish away |
1669 | * under us on another CPU |
1670 | */ |
1671 | __remove_hrtimer(timer, old_base, HRTIMER_STATE_MIGRATE, 0); |
1672 | timer->base = new_base; |
1673 | /* |
1674 | * Enqueue the timers on the new cpu. This does not |
1675 | * reprogram the event device in case the timer |
1676 | * expires before the earliest on this CPU, but we run |
1677 | * hrtimer_interrupt after we migrated everything to |
1678 | * sort out already expired timers and reprogram the |
1679 | * event device. |
1680 | */ |
1681 | enqueue_hrtimer(timer, new_base); |
1682 | |
1683 | /* Clear the migration state bit */ |
1684 | timer->state &= ~HRTIMER_STATE_MIGRATE; |
1685 | } |
1686 | } |
1687 | |
1688 | static void migrate_hrtimers(int scpu) |
1689 | { |
1690 | struct hrtimer_cpu_base *old_base, *new_base; |
1691 | int i; |
1692 | |
1693 | BUG_ON(cpu_online(scpu)); |
1694 | tick_cancel_sched_timer(scpu); |
1695 | |
1696 | local_irq_disable(); |
1697 | old_base = &per_cpu(hrtimer_bases, scpu); |
1698 | new_base = &__get_cpu_var(hrtimer_bases); |
1699 | /* |
1700 | * The caller is globally serialized and nobody else |
1701 | * takes two locks at once, deadlock is not possible. |
1702 | */ |
1703 | raw_spin_lock(&new_base->lock); |
1704 | raw_spin_lock_nested(&old_base->lock, SINGLE_DEPTH_NESTING); |
1705 | |
1706 | for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) { |
1707 | migrate_hrtimer_list(&old_base->clock_base[i], |
1708 | &new_base->clock_base[i]); |
1709 | } |
1710 | |
1711 | raw_spin_unlock(&old_base->lock); |
1712 | raw_spin_unlock(&new_base->lock); |
1713 | |
1714 | /* Check, if we got expired work to do */ |
1715 | __hrtimer_peek_ahead_timers(); |
1716 | local_irq_enable(); |
1717 | } |
1718 | |
1719 | #endif /* CONFIG_HOTPLUG_CPU */ |
1720 | |
1721 | static int __cpuinit hrtimer_cpu_notify(struct notifier_block *self, |
1722 | unsigned long action, void *hcpu) |
1723 | { |
1724 | int scpu = (long)hcpu; |
1725 | |
1726 | switch (action) { |
1727 | |
1728 | case CPU_UP_PREPARE: |
1729 | case CPU_UP_PREPARE_FROZEN: |
1730 | init_hrtimers_cpu(scpu); |
1731 | break; |
1732 | |
1733 | #ifdef CONFIG_HOTPLUG_CPU |
1734 | case CPU_DYING: |
1735 | case CPU_DYING_FROZEN: |
1736 | clockevents_notify(CLOCK_EVT_NOTIFY_CPU_DYING, &scpu); |
1737 | break; |
1738 | case CPU_DEAD: |
1739 | case CPU_DEAD_FROZEN: |
1740 | { |
1741 | clockevents_notify(CLOCK_EVT_NOTIFY_CPU_DEAD, &scpu); |
1742 | migrate_hrtimers(scpu); |
1743 | break; |
1744 | } |
1745 | #endif |
1746 | |
1747 | default: |
1748 | break; |
1749 | } |
1750 | |
1751 | return NOTIFY_OK; |
1752 | } |
1753 | |
1754 | static struct notifier_block __cpuinitdata hrtimers_nb = { |
1755 | .notifier_call = hrtimer_cpu_notify, |
1756 | }; |
1757 | |
1758 | void __init hrtimers_init(void) |
1759 | { |
1760 | hrtimer_cpu_notify(&hrtimers_nb, (unsigned long)CPU_UP_PREPARE, |
1761 | (void *)(long)smp_processor_id()); |
1762 | register_cpu_notifier(&hrtimers_nb); |
1763 | #ifdef CONFIG_HIGH_RES_TIMERS |
1764 | open_softirq(HRTIMER_SOFTIRQ, run_hrtimer_softirq); |
1765 | #endif |
1766 | } |
1767 | |
1768 | /** |
1769 | * schedule_hrtimeout_range_clock - sleep until timeout |
1770 | * @expires: timeout value (ktime_t) |
1771 | * @delta: slack in expires timeout (ktime_t) |
1772 | * @mode: timer mode, HRTIMER_MODE_ABS or HRTIMER_MODE_REL |
1773 | * @clock: timer clock, CLOCK_MONOTONIC or CLOCK_REALTIME |
1774 | */ |
1775 | int __sched |
1776 | schedule_hrtimeout_range_clock(ktime_t *expires, unsigned long delta, |
1777 | const enum hrtimer_mode mode, int clock) |
1778 | { |
1779 | struct hrtimer_sleeper t; |
1780 | |
1781 | /* |
1782 | * Optimize when a zero timeout value is given. It does not |
1783 | * matter whether this is an absolute or a relative time. |
1784 | */ |
1785 | if (expires && !expires->tv64) { |
1786 | __set_current_state(TASK_RUNNING); |
1787 | return 0; |
1788 | } |
1789 | |
1790 | /* |
1791 | * A NULL parameter means "infinite" |
1792 | */ |
1793 | if (!expires) { |
1794 | schedule(); |
1795 | __set_current_state(TASK_RUNNING); |
1796 | return -EINTR; |
1797 | } |
1798 | |
1799 | hrtimer_init_on_stack(&t.timer, clock, mode); |
1800 | hrtimer_set_expires_range_ns(&t.timer, *expires, delta); |
1801 | |
1802 | hrtimer_init_sleeper(&t, current); |
1803 | |
1804 | hrtimer_start_expires(&t.timer, mode); |
1805 | if (!hrtimer_active(&t.timer)) |
1806 | t.task = NULL; |
1807 | |
1808 | if (likely(t.task)) |
1809 | schedule(); |
1810 | |
1811 | hrtimer_cancel(&t.timer); |
1812 | destroy_hrtimer_on_stack(&t.timer); |
1813 | |
1814 | __set_current_state(TASK_RUNNING); |
1815 | |
1816 | return !t.task ? 0 : -EINTR; |
1817 | } |
1818 | |
1819 | /** |
1820 | * schedule_hrtimeout_range - sleep until timeout |
1821 | * @expires: timeout value (ktime_t) |
1822 | * @delta: slack in expires timeout (ktime_t) |
1823 | * @mode: timer mode, HRTIMER_MODE_ABS or HRTIMER_MODE_REL |
1824 | * |
1825 | * Make the current task sleep until the given expiry time has |
1826 | * elapsed. The routine will return immediately unless |
1827 | * the current task state has been set (see set_current_state()). |
1828 | * |
1829 | * The @delta argument gives the kernel the freedom to schedule the |
1830 | * actual wakeup to a time that is both power and performance friendly. |
1831 | * The kernel give the normal best effort behavior for "@expires+@delta", |
1832 | * but may decide to fire the timer earlier, but no earlier than @expires. |
1833 | * |
1834 | * You can set the task state as follows - |
1835 | * |
1836 | * %TASK_UNINTERRUPTIBLE - at least @timeout time is guaranteed to |
1837 | * pass before the routine returns. |
1838 | * |
1839 | * %TASK_INTERRUPTIBLE - the routine may return early if a signal is |
1840 | * delivered to the current task. |
1841 | * |
1842 | * The current task state is guaranteed to be TASK_RUNNING when this |
1843 | * routine returns. |
1844 | * |
1845 | * Returns 0 when the timer has expired otherwise -EINTR |
1846 | */ |
1847 | int __sched schedule_hrtimeout_range(ktime_t *expires, unsigned long delta, |
1848 | const enum hrtimer_mode mode) |
1849 | { |
1850 | return schedule_hrtimeout_range_clock(expires, delta, mode, |
1851 | CLOCK_MONOTONIC); |
1852 | } |
1853 | EXPORT_SYMBOL_GPL(schedule_hrtimeout_range); |
1854 | |
1855 | /** |
1856 | * schedule_hrtimeout - sleep until timeout |
1857 | * @expires: timeout value (ktime_t) |
1858 | * @mode: timer mode, HRTIMER_MODE_ABS or HRTIMER_MODE_REL |
1859 | * |
1860 | * Make the current task sleep until the given expiry time has |
1861 | * elapsed. The routine will return immediately unless |
1862 | * the current task state has been set (see set_current_state()). |
1863 | * |
1864 | * You can set the task state as follows - |
1865 | * |
1866 | * %TASK_UNINTERRUPTIBLE - at least @timeout time is guaranteed to |
1867 | * pass before the routine returns. |
1868 | * |
1869 | * %TASK_INTERRUPTIBLE - the routine may return early if a signal is |
1870 | * delivered to the current task. |
1871 | * |
1872 | * The current task state is guaranteed to be TASK_RUNNING when this |
1873 | * routine returns. |
1874 | * |
1875 | * Returns 0 when the timer has expired otherwise -EINTR |
1876 | */ |
1877 | int __sched schedule_hrtimeout(ktime_t *expires, |
1878 | const enum hrtimer_mode mode) |
1879 | { |
1880 | return schedule_hrtimeout_range(expires, 0, mode); |
1881 | } |
1882 | EXPORT_SYMBOL_GPL(schedule_hrtimeout); |
1883 |
Branches:
ben-wpan
ben-wpan-stefan
javiroman/ks7010
jz-2.6.34
jz-2.6.34-rc5
jz-2.6.34-rc6
jz-2.6.34-rc7
jz-2.6.35
jz-2.6.36
jz-2.6.37
jz-2.6.38
jz-2.6.39
jz-3.0
jz-3.1
jz-3.11
jz-3.12
jz-3.13
jz-3.15
jz-3.16
jz-3.18-dt
jz-3.2
jz-3.3
jz-3.4
jz-3.5
jz-3.6
jz-3.6-rc2-pwm
jz-3.9
jz-3.9-clk
jz-3.9-rc8
jz47xx
jz47xx-2.6.38
master
Tags:
od-2011-09-04
od-2011-09-18
v2.6.34-rc5
v2.6.34-rc6
v2.6.34-rc7
v3.9