Root/Documentation/flexible-arrays.txt

1Using flexible arrays in the kernel
2Last updated for 2.6.32
3Jonathan Corbet <corbet@lwn.net>
4
5Large contiguous memory allocations can be unreliable in the Linux kernel.
6Kernel programmers will sometimes respond to this problem by allocating
7pages with vmalloc(). This solution not ideal, though. On 32-bit systems,
8memory from vmalloc() must be mapped into a relatively small address space;
9it's easy to run out. On SMP systems, the page table changes required by
10vmalloc() allocations can require expensive cross-processor interrupts on
11all CPUs. And, on all systems, use of space in the vmalloc() range
12increases pressure on the translation lookaside buffer (TLB), reducing the
13performance of the system.
14
15In many cases, the need for memory from vmalloc() can be eliminated by
16piecing together an array from smaller parts; the flexible array library
17exists to make this task easier.
18
19A flexible array holds an arbitrary (within limits) number of fixed-sized
20objects, accessed via an integer index. Sparse arrays are handled
21reasonably well. Only single-page allocations are made, so memory
22allocation failures should be relatively rare. The down sides are that the
23arrays cannot be indexed directly, individual object size cannot exceed the
24system page size, and putting data into a flexible array requires a copy
25operation. It's also worth noting that flexible arrays do no internal
26locking at all; if concurrent access to an array is possible, then the
27caller must arrange for appropriate mutual exclusion.
28
29The creation of a flexible array is done with:
30
31    #include <linux/flex_array.h>
32
33    struct flex_array *flex_array_alloc(int element_size,
34                    unsigned int total,
35                    gfp_t flags);
36
37The individual object size is provided by element_size, while total is the
38maximum number of objects which can be stored in the array. The flags
39argument is passed directly to the internal memory allocation calls. With
40the current code, using flags to ask for high memory is likely to lead to
41notably unpleasant side effects.
42
43It is also possible to define flexible arrays at compile time with:
44
45    DEFINE_FLEX_ARRAY(name, element_size, total);
46
47This macro will result in a definition of an array with the given name; the
48element size and total will be checked for validity at compile time.
49
50Storing data into a flexible array is accomplished with a call to:
51
52    int flex_array_put(struct flex_array *array, unsigned int element_nr,
53                   void *src, gfp_t flags);
54
55This call will copy the data from src into the array, in the position
56indicated by element_nr (which must be less than the maximum specified when
57the array was created). If any memory allocations must be performed, flags
58will be used. The return value is zero on success, a negative error code
59otherwise.
60
61There might possibly be a need to store data into a flexible array while
62running in some sort of atomic context; in this situation, sleeping in the
63memory allocator would be a bad thing. That can be avoided by using
64GFP_ATOMIC for the flags value, but, often, there is a better way. The
65trick is to ensure that any needed memory allocations are done before
66entering atomic context, using:
67
68    int flex_array_prealloc(struct flex_array *array, unsigned int start,
69                unsigned int end, gfp_t flags);
70
71This function will ensure that memory for the elements indexed in the range
72defined by start and end has been allocated. Thereafter, a
73flex_array_put() call on an element in that range is guaranteed not to
74block.
75
76Getting data back out of the array is done with:
77
78    void *flex_array_get(struct flex_array *fa, unsigned int element_nr);
79
80The return value is a pointer to the data element, or NULL if that
81particular element has never been allocated.
82
83Note that it is possible to get back a valid pointer for an element which
84has never been stored in the array. Memory for array elements is allocated
85one page at a time; a single allocation could provide memory for several
86adjacent elements. Flexible array elements are normally initialized to the
87value FLEX_ARRAY_FREE (defined as 0x6c in <linux/poison.h>), so errors
88involving that number probably result from use of unstored array entries.
89Note that, if array elements are allocated with __GFP_ZERO, they will be
90initialized to zero and this poisoning will not happen.
91
92Individual elements in the array can be cleared with:
93
94    int flex_array_clear(struct flex_array *array, unsigned int element_nr);
95
96This function will set the given element to FLEX_ARRAY_FREE and return
97zero. If storage for the indicated element is not allocated for the array,
98flex_array_clear() will return -EINVAL instead. Note that clearing an
99element does not release the storage associated with it; to reduce the
100allocated size of an array, call:
101
102    int flex_array_shrink(struct flex_array *array);
103
104The return value will be the number of pages of memory actually freed.
105This function works by scanning the array for pages containing nothing but
106FLEX_ARRAY_FREE bytes, so (1) it can be expensive, and (2) it will not work
107if the array's pages are allocated with __GFP_ZERO.
108
109It is possible to remove all elements of an array with a call to:
110
111    void flex_array_free_parts(struct flex_array *array);
112
113This call frees all elements, but leaves the array itself in place.
114Freeing the entire array is done with:
115
116    void flex_array_free(struct flex_array *array);
117
118As of this writing, there are no users of flexible arrays in the mainline
119kernel. The functions described here are also not exported to modules;
120that will probably be fixed when somebody comes up with a need for it.
121

Archive Download this file



interactive