Root/
1 | # ALSA USB drivers |
2 | |
3 | menuconfig SND_USB |
4 | bool "USB sound devices" |
5 | depends on USB |
6 | default y |
7 | help |
8 | Support for sound devices connected via the USB bus. |
9 | |
10 | if SND_USB && USB |
11 | |
12 | config SND_USB_AUDIO |
13 | tristate "USB Audio/MIDI driver" |
14 | select SND_HWDEP |
15 | select SND_RAWMIDI |
16 | select SND_PCM |
17 | help |
18 | Say Y here to include support for USB audio and USB MIDI |
19 | devices. |
20 | |
21 | To compile this driver as a module, choose M here: the module |
22 | will be called snd-usb-audio. |
23 | |
24 | config SND_USB_UA101 |
25 | tristate "Edirol UA-101/UA-1000 driver (EXPERIMENTAL)" |
26 | depends on EXPERIMENTAL |
27 | select SND_PCM |
28 | select SND_RAWMIDI |
29 | help |
30 | Say Y here to include support for the Edirol UA-101 and UA-1000 |
31 | audio/MIDI interfaces. |
32 | |
33 | To compile this driver as a module, choose M here: the module |
34 | will be called snd-ua101. |
35 | |
36 | config SND_USB_USX2Y |
37 | tristate "Tascam US-122, US-224 and US-428 USB driver" |
38 | depends on X86 || PPC || ALPHA |
39 | select SND_HWDEP |
40 | select SND_RAWMIDI |
41 | select SND_PCM |
42 | help |
43 | Say Y here to include support for Tascam USB Audio/MIDI |
44 | interfaces or controllers US-122, US-224 and US-428. |
45 | |
46 | To compile this driver as a module, choose M here: the module |
47 | will be called snd-usb-usx2y. |
48 | |
49 | config SND_USB_CAIAQ |
50 | tristate "Native Instruments USB audio devices" |
51 | select SND_HWDEP |
52 | select SND_RAWMIDI |
53 | select SND_PCM |
54 | help |
55 | Say Y here to include support for caiaq USB audio interfaces, |
56 | namely: |
57 | |
58 | * Native Instruments RigKontrol2 |
59 | * Native Instruments RigKontrol3 |
60 | * Native Instruments Kore Controller |
61 | * Native Instruments Kore Controller 2 |
62 | * Native Instruments Audio Kontrol 1 |
63 | * Native Instruments Audio 2 DJ |
64 | * Native Instruments Audio 4 DJ |
65 | * Native Instruments Audio 8 DJ |
66 | * Native Instruments Guitar Rig Session I/O |
67 | * Native Instruments Guitar Rig mobile |
68 | |
69 | To compile this driver as a module, choose M here: the module |
70 | will be called snd-usb-caiaq. |
71 | |
72 | config SND_USB_CAIAQ_INPUT |
73 | bool "enable input device for controllers" |
74 | depends on SND_USB_CAIAQ |
75 | depends on INPUT=y || INPUT=SND_USB_CAIAQ |
76 | help |
77 | Say Y here to support input controllers like buttons, knobs, |
78 | alpha dials and analog pedals on the following products: |
79 | |
80 | * Native Instruments RigKontrol2 |
81 | * Native Instruments RigKontrol3 |
82 | * Native Instruments Kore Controller |
83 | * Native Instruments Kore Controller 2 |
84 | * Native Instruments Audio Kontrol 1 |
85 | |
86 | config SND_USB_US122L |
87 | tristate "Tascam US-122L USB driver" |
88 | depends on X86 && EXPERIMENTAL |
89 | select SND_HWDEP |
90 | select SND_RAWMIDI |
91 | help |
92 | Say Y here to include support for Tascam US-122L USB Audio/MIDI |
93 | interfaces. |
94 | |
95 | To compile this driver as a module, choose M here: the module |
96 | will be called snd-usb-us122l. |
97 | |
98 | endif # SND_USB |
99 | |
100 |
Branches:
ben-wpan
ben-wpan-stefan
javiroman/ks7010
jz-2.6.34
jz-2.6.34-rc5
jz-2.6.34-rc6
jz-2.6.34-rc7
jz-2.6.35
jz-2.6.36
jz-2.6.37
jz-2.6.38
jz-2.6.39
jz-3.0
jz-3.1
jz-3.11
jz-3.12
jz-3.13
jz-3.15
jz-3.16
jz-3.18-dt
jz-3.2
jz-3.3
jz-3.4
jz-3.5
jz-3.6
jz-3.6-rc2-pwm
jz-3.9
jz-3.9-clk
jz-3.9-rc8
jz47xx
jz47xx-2.6.38
master
Tags:
od-2011-09-04
od-2011-09-18
v2.6.34-rc5
v2.6.34-rc6
v2.6.34-rc7
v3.9