Root/
1 | Davicom DM9102(A)/DM9132/DM9801 fast ethernet driver for Linux. |
2 | |
3 | This program is free software; you can redistribute it and/or |
4 | modify it under the terms of the GNU General Public License |
5 | as published by the Free Software Foundation; either version 2 |
6 | of the License, or (at your option) any later version. |
7 | |
8 | This program is distributed in the hope that it will be useful, |
9 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
10 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
11 | GNU General Public License for more details. |
12 | |
13 | |
14 | This driver provides kernel support for Davicom DM9102(A)/DM9132/DM9801 ethernet cards ( CNET |
15 | 10/100 ethernet cards uses Davicom chipset too, so this driver supports CNET cards too ).If you |
16 | didn't compile this driver as a module, it will automatically load itself on boot and print a |
17 | line similar to : |
18 | |
19 | dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17) |
20 | |
21 | If you compiled this driver as a module, you have to load it on boot.You can load it with command : |
22 | |
23 | insmod dmfe |
24 | |
25 | This way it will autodetect the device mode.This is the suggested way to load the module.Or you can pass |
26 | a mode= setting to module while loading, like : |
27 | |
28 | insmod dmfe mode=0 # Force 10M Half Duplex |
29 | insmod dmfe mode=1 # Force 100M Half Duplex |
30 | insmod dmfe mode=4 # Force 10M Full Duplex |
31 | insmod dmfe mode=5 # Force 100M Full Duplex |
32 | |
33 | Next you should configure your network interface with a command similar to : |
34 | |
35 | ifconfig eth0 172.22.3.18 |
36 | ^^^^^^^^^^^ |
37 | Your IP Address |
38 | |
39 | Then you may have to modify the default routing table with command : |
40 | |
41 | route add default eth0 |
42 | |
43 | |
44 | Now your ethernet card should be up and running. |
45 | |
46 | |
47 | TODO: |
48 | |
49 | Implement pci_driver::suspend() and pci_driver::resume() power management methods. |
50 | Check on 64 bit boxes. |
51 | Check and fix on big endian boxes. |
52 | Test and make sure PCI latency is now correct for all cases. |
53 | |
54 | |
55 | Authors: |
56 | |
57 | Sten Wang <sten_wang@davicom.com.tw > : Original Author |
58 | Tobias Ringstrom <tori@unhappy.mine.nu> : Current Maintainer |
59 | |
60 | Contributors: |
61 | |
62 | Marcelo Tosatti <marcelo@conectiva.com.br> |
63 | Alan Cox <alan@lxorguk.ukuu.org.uk> |
64 | Jeff Garzik <jgarzik@pobox.com> |
65 | Vojtech Pavlik <vojtech@suse.cz> |
66 |
Branches:
ben-wpan
ben-wpan-stefan
javiroman/ks7010
jz-2.6.34
jz-2.6.34-rc5
jz-2.6.34-rc6
jz-2.6.34-rc7
jz-2.6.35
jz-2.6.36
jz-2.6.37
jz-2.6.38
jz-2.6.39
jz-3.0
jz-3.1
jz-3.11
jz-3.12
jz-3.13
jz-3.15
jz-3.16
jz-3.18-dt
jz-3.2
jz-3.3
jz-3.4
jz-3.5
jz-3.6
jz-3.6-rc2-pwm
jz-3.9
jz-3.9-clk
jz-3.9-rc8
jz47xx
jz47xx-2.6.38
master
Tags:
od-2011-09-04
od-2011-09-18
v2.6.34-rc5
v2.6.34-rc6
v2.6.34-rc7
v3.9