Root/
1 | Some notes regarding the cx18 driver for the Conexant CX23418 MPEG |
2 | encoder chip: |
3 | |
4 | 1) Currently supported are: |
5 | |
6 | - Hauppauge HVR-1600 |
7 | - Compro VideoMate H900 |
8 | - Yuan MPC718 |
9 | - Conexant Raptor PAL/SECAM devkit |
10 | |
11 | 2) Some people have problems getting the i2c bus to work. |
12 | The symptom is that the eeprom cannot be read and the card is |
13 | unusable. This is probably fixed, but if you have problems |
14 | then post to the video4linux or ivtv-users mailing list. |
15 | |
16 | 3) VBI (raw or sliced) has not yet been implemented. |
17 | |
18 | 4) MPEG indexing is not yet implemented. |
19 | |
20 | 5) The driver is still a bit rough around the edges, this should |
21 | improve over time. |
22 | |
23 | |
24 | Firmware: |
25 | |
26 | You can obtain the firmware files here: |
27 | |
28 | http://dl.ivtvdriver.org/ivtv/firmware/cx18-firmware.tar.gz |
29 | |
30 | Untar and copy the .fw files to your firmware directory. |
31 |
Branches:
ben-wpan
ben-wpan-stefan
javiroman/ks7010
jz-2.6.34
jz-2.6.34-rc5
jz-2.6.34-rc6
jz-2.6.34-rc7
jz-2.6.35
jz-2.6.36
jz-2.6.37
jz-2.6.38
jz-2.6.39
jz-3.0
jz-3.1
jz-3.11
jz-3.12
jz-3.13
jz-3.15
jz-3.16
jz-3.18-dt
jz-3.2
jz-3.3
jz-3.4
jz-3.5
jz-3.6
jz-3.6-rc2-pwm
jz-3.9
jz-3.9-clk
jz-3.9-rc8
jz47xx
jz47xx-2.6.38
master
Tags:
od-2011-09-04
od-2011-09-18
v2.6.34-rc5
v2.6.34-rc6
v2.6.34-rc7
v3.9