Root/
1 | menu "IEEE 1394 (FireWire) support" |
2 | depends on PCI || BROKEN |
3 | # firewire-core does not depend on PCI but is |
4 | # not useful without PCI controller driver |
5 | |
6 | comment "You can enable one or both FireWire driver stacks." |
7 | comment "The newer stack is recommended." |
8 | |
9 | config FIREWIRE |
10 | tristate "FireWire driver stack" |
11 | select CRC_ITU_T |
12 | help |
13 | This is the new-generation IEEE 1394 (FireWire) driver stack |
14 | a.k.a. Juju, a new implementation designed for robustness and |
15 | simplicity. |
16 | See http://ieee1394.wiki.kernel.org/index.php/Juju_Migration |
17 | for information about migration from the older Linux 1394 stack |
18 | to the new driver stack. |
19 | |
20 | To compile this driver as a module, say M here: the module will be |
21 | called firewire-core. |
22 | |
23 | config FIREWIRE_OHCI |
24 | tristate "OHCI-1394 controllers" |
25 | depends on PCI && FIREWIRE |
26 | help |
27 | Enable this driver if you have a FireWire controller based |
28 | on the OHCI specification. For all practical purposes, this |
29 | is the only chipset in use, so say Y here. |
30 | |
31 | To compile this driver as a module, say M here: The module will be |
32 | called firewire-ohci. |
33 | |
34 | config FIREWIRE_OHCI_DEBUG |
35 | bool |
36 | depends on FIREWIRE_OHCI |
37 | default y |
38 | |
39 | config FIREWIRE_SBP2 |
40 | tristate "Storage devices (SBP-2 protocol)" |
41 | depends on FIREWIRE && SCSI |
42 | help |
43 | This option enables you to use SBP-2 devices connected to a |
44 | FireWire bus. SBP-2 devices include storage devices like |
45 | harddisks and DVD drives, also some other FireWire devices |
46 | like scanners. |
47 | |
48 | To compile this driver as a module, say M here: The module will be |
49 | called firewire-sbp2. |
50 | |
51 | You should also enable support for disks, CD-ROMs, etc. in the SCSI |
52 | configuration section. |
53 | |
54 | config FIREWIRE_NET |
55 | tristate "IP networking over 1394 (EXPERIMENTAL)" |
56 | depends on FIREWIRE && INET && EXPERIMENTAL |
57 | help |
58 | This enables IPv4 over IEEE 1394, providing IP connectivity with |
59 | other implementations of RFC 2734 as found on several operating |
60 | systems. Multicast support is currently limited. |
61 | |
62 | NOTE, this driver is not stable yet! |
63 | |
64 | To compile this driver as a module, say M here: The module will be |
65 | called firewire-net. |
66 | |
67 | source "drivers/ieee1394/Kconfig" |
68 | |
69 | endmenu |
70 |
Branches:
ben-wpan
ben-wpan-stefan
javiroman/ks7010
jz-2.6.34
jz-2.6.34-rc5
jz-2.6.34-rc6
jz-2.6.34-rc7
jz-2.6.35
jz-2.6.36
jz-2.6.37
jz-2.6.38
jz-2.6.39
jz-3.0
jz-3.1
jz-3.11
jz-3.12
jz-3.13
jz-3.15
jz-3.16
jz-3.18-dt
jz-3.2
jz-3.3
jz-3.4
jz-3.5
jz-3.6
jz-3.6-rc2-pwm
jz-3.9
jz-3.9-clk
jz-3.9-rc8
jz47xx
jz47xx-2.6.38
master
Tags:
od-2011-09-04
od-2011-09-18
v2.6.34-rc5
v2.6.34-rc6
v2.6.34-rc7
v3.9