Root/
1 | /* |
2 | * linux/drivers/pcmcia/pxa2xx_stargate2.c |
3 | * |
4 | * Stargate 2 PCMCIA specific routines. |
5 | * |
6 | * Created: December 6, 2005 |
7 | * Author: Ed C. Epp |
8 | * Copyright: Intel Corp 2005 |
9 | * Jonathan Cameron <jic23@cam.ac.uk> 2009 |
10 | * |
11 | * This program is free software; you can redistribute it and/or modify |
12 | * it under the terms of the GNU General Public License version 2 as |
13 | * published by the Free Software Foundation. |
14 | */ |
15 | |
16 | #include <linux/module.h> |
17 | #include <linux/init.h> |
18 | #include <linux/kernel.h> |
19 | #include <linux/interrupt.h> |
20 | #include <linux/delay.h> |
21 | #include <linux/platform_device.h> |
22 | #include <linux/gpio.h> |
23 | |
24 | #include <pcmcia/ss.h> |
25 | |
26 | #include <asm/irq.h> |
27 | #include <asm/mach-types.h> |
28 | |
29 | #include "soc_common.h" |
30 | |
31 | #define SG2_S0_BUFF_CTL 120 |
32 | #define SG2_S0_POWER_CTL 108 |
33 | #define SG2_S0_GPIO_RESET 82 |
34 | #define SG2_S0_GPIO_DETECT 53 |
35 | #define SG2_S0_GPIO_READY 81 |
36 | |
37 | static struct pcmcia_irqs irqs[] = { |
38 | { 0, IRQ_GPIO(SG2_S0_GPIO_DETECT), "PCMCIA0 CD" }, |
39 | }; |
40 | |
41 | static int sg2_pcmcia_hw_init(struct soc_pcmcia_socket *skt) |
42 | { |
43 | skt->socket.pci_irq = IRQ_GPIO(SG2_S0_GPIO_READY); |
44 | return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs)); |
45 | } |
46 | |
47 | static void sg2_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) |
48 | { |
49 | soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs)); |
50 | } |
51 | |
52 | static void sg2_pcmcia_socket_state(struct soc_pcmcia_socket *skt, |
53 | struct pcmcia_state *state) |
54 | { |
55 | state->detect = !gpio_get_value(SG2_S0_GPIO_DETECT); |
56 | state->ready = !!gpio_get_value(SG2_S0_GPIO_READY); |
57 | state->bvd1 = 0; /* not available - battery detect on card */ |
58 | state->bvd2 = 0; /* not available */ |
59 | state->vs_3v = 1; /* not available - voltage detect for card */ |
60 | state->vs_Xv = 0; /* not available */ |
61 | state->wrprot = 0; /* not available - write protect */ |
62 | } |
63 | |
64 | static int sg2_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, |
65 | const socket_state_t *state) |
66 | { |
67 | /* Enable card power */ |
68 | switch (state->Vcc) { |
69 | case 0: |
70 | /* sets power ctl register high */ |
71 | gpio_set_value(SG2_S0_POWER_CTL, 1); |
72 | break; |
73 | case 33: |
74 | case 50: |
75 | /* sets power control register low (clear) */ |
76 | gpio_set_value(SG2_S0_POWER_CTL, 0); |
77 | msleep(100); |
78 | break; |
79 | default: |
80 | pr_err("%s(): bad Vcc %u\n", |
81 | __func__, state->Vcc); |
82 | return -1; |
83 | } |
84 | |
85 | /* reset */ |
86 | gpio_set_value(SG2_S0_GPIO_RESET, !!(state->flags & SS_RESET)); |
87 | |
88 | return 0; |
89 | } |
90 | |
91 | static void sg2_pcmcia_socket_init(struct soc_pcmcia_socket *skt) |
92 | { |
93 | soc_pcmcia_enable_irqs(skt, irqs, ARRAY_SIZE(irqs)); |
94 | } |
95 | |
96 | static void sg2_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt) |
97 | { |
98 | soc_pcmcia_disable_irqs(skt, irqs, ARRAY_SIZE(irqs)); |
99 | } |
100 | |
101 | static struct pcmcia_low_level sg2_pcmcia_ops __initdata = { |
102 | .owner = THIS_MODULE, |
103 | .hw_init = sg2_pcmcia_hw_init, |
104 | .hw_shutdown = sg2_pcmcia_hw_shutdown, |
105 | .socket_state = sg2_pcmcia_socket_state, |
106 | .configure_socket = sg2_pcmcia_configure_socket, |
107 | .socket_init = sg2_pcmcia_socket_init, |
108 | .socket_suspend = sg2_pcmcia_socket_suspend, |
109 | .nr = 1, |
110 | }; |
111 | |
112 | static struct platform_device *sg2_pcmcia_device; |
113 | |
114 | static int __init sg2_pcmcia_init(void) |
115 | { |
116 | int ret; |
117 | |
118 | if (!machine_is_stargate2()) |
119 | return -ENODEV; |
120 | |
121 | sg2_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); |
122 | if (!sg2_pcmcia_device) |
123 | return -ENOMEM; |
124 | |
125 | ret = gpio_request(SG2_S0_BUFF_CTL, "SG2 CF buff ctl"); |
126 | if (ret) |
127 | goto error_put_platform_device; |
128 | ret = gpio_request(SG2_S0_POWER_CTL, "SG2 CF power ctl"); |
129 | if (ret) |
130 | goto error_free_gpio_buff_ctl; |
131 | ret = gpio_request(SG2_S0_GPIO_RESET, "SG2 CF reset"); |
132 | if (ret) |
133 | goto error_free_gpio_power_ctl; |
134 | /* Set gpio directions */ |
135 | gpio_direction_output(SG2_S0_BUFF_CTL, 0); |
136 | gpio_direction_output(SG2_S0_POWER_CTL, 1); |
137 | gpio_direction_output(SG2_S0_GPIO_RESET, 1); |
138 | |
139 | ret = platform_device_add_data(sg2_pcmcia_device, |
140 | &sg2_pcmcia_ops, |
141 | sizeof(sg2_pcmcia_ops)); |
142 | if (ret) |
143 | goto error_free_gpio_reset; |
144 | |
145 | ret = platform_device_add(sg2_pcmcia_device); |
146 | if (ret) |
147 | goto error_free_gpio_reset; |
148 | |
149 | return 0; |
150 | error_free_gpio_reset: |
151 | gpio_free(SG2_S0_GPIO_RESET); |
152 | error_free_gpio_power_ctl: |
153 | gpio_free(SG2_S0_POWER_CTL); |
154 | error_free_gpio_buff_ctl: |
155 | gpio_free(SG2_S0_BUFF_CTL); |
156 | error_put_platform_device: |
157 | platform_device_put(sg2_pcmcia_device); |
158 | |
159 | return ret; |
160 | } |
161 | |
162 | static void __exit sg2_pcmcia_exit(void) |
163 | { |
164 | platform_device_unregister(sg2_pcmcia_device); |
165 | gpio_free(SG2_S0_BUFF_CTL); |
166 | gpio_free(SG2_S0_POWER_CTL); |
167 | gpio_free(SG2_S0_GPIO_RESET); |
168 | } |
169 | |
170 | fs_initcall(sg2_pcmcia_init); |
171 | module_exit(sg2_pcmcia_exit); |
172 | |
173 | MODULE_LICENSE("GPL"); |
174 | MODULE_ALIAS("platform:pxa2xx-pcmcia"); |
175 |
Branches:
ben-wpan
ben-wpan-stefan
javiroman/ks7010
jz-2.6.34
jz-2.6.34-rc5
jz-2.6.34-rc6
jz-2.6.34-rc7
jz-2.6.35
jz-2.6.36
jz-2.6.37
jz-2.6.38
jz-2.6.39
jz-3.0
jz-3.1
jz-3.11
jz-3.12
jz-3.13
jz-3.15
jz-3.16
jz-3.18-dt
jz-3.2
jz-3.3
jz-3.4
jz-3.5
jz-3.6
jz-3.6-rc2-pwm
jz-3.9
jz-3.9-clk
jz-3.9-rc8
jz47xx
jz47xx-2.6.38
master
Tags:
od-2011-09-04
od-2011-09-18
v2.6.34-rc5
v2.6.34-rc6
v2.6.34-rc7
v3.9