Root/
1 | #ifndef __SOUND_OPL3_H |
2 | #define __SOUND_OPL3_H |
3 | |
4 | /* |
5 | * Definitions of the OPL-3 registers. |
6 | * |
7 | * Copyright (c) by Jaroslav Kysela <perex@perex.cz>, |
8 | * Hannu Savolainen 1993-1996 |
9 | * |
10 | * |
11 | * The OPL-3 mode is switched on by writing 0x01, to the offset 5 |
12 | * of the right side. |
13 | * |
14 | * Another special register at the right side is at offset 4. It contains |
15 | * a bit mask defining which voices are used as 4 OP voices. |
16 | * |
17 | * The percussive mode is implemented in the left side only. |
18 | * |
19 | * With the above exceptions the both sides can be operated independently. |
20 | * |
21 | * A 4 OP voice can be created by setting the corresponding |
22 | * bit at offset 4 of the right side. |
23 | * |
24 | * For example setting the rightmost bit (0x01) changes the |
25 | * first voice on the right side to the 4 OP mode. The fourth |
26 | * voice is made inaccessible. |
27 | * |
28 | * If a voice is set to the 2 OP mode, it works like 2 OP modes |
29 | * of the original YM3812 (AdLib). In addition the voice can |
30 | * be connected the left, right or both stereo channels. It can |
31 | * even be left unconnected. This works with 4 OP voices also. |
32 | * |
33 | * The stereo connection bits are located in the FEEDBACK_CONNECTION |
34 | * register of the voice (0xC0-0xC8). In 4 OP voices these bits are |
35 | * in the second half of the voice. |
36 | * |
37 | * |
38 | * This program is free software; you can redistribute it and/or modify |
39 | * it under the terms of the GNU General Public License as published by |
40 | * the Free Software Foundation; either version 2 of the License, or |
41 | * (at your option) any later version. |
42 | * |
43 | * This program is distributed in the hope that it will be useful, |
44 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
45 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
46 | * GNU General Public License for more details. |
47 | * |
48 | * You should have received a copy of the GNU General Public License |
49 | * along with this program; if not, write to the Free Software |
50 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
51 | * |
52 | */ |
53 | |
54 | #include <sound/core.h> |
55 | #include <sound/hwdep.h> |
56 | #include <sound/timer.h> |
57 | #include <sound/seq_midi_emul.h> |
58 | #ifdef CONFIG_SND_SEQUENCER_OSS |
59 | #include <sound/seq_oss.h> |
60 | #include <sound/seq_oss_legacy.h> |
61 | #endif |
62 | #include <sound/seq_device.h> |
63 | #include <sound/asound_fm.h> |
64 | |
65 | /* |
66 | * Register numbers for the global registers |
67 | */ |
68 | |
69 | #define OPL3_REG_TEST 0x01 |
70 | #define OPL3_ENABLE_WAVE_SELECT 0x20 |
71 | |
72 | #define OPL3_REG_TIMER1 0x02 |
73 | #define OPL3_REG_TIMER2 0x03 |
74 | #define OPL3_REG_TIMER_CONTROL 0x04 /* Left side */ |
75 | #define OPL3_IRQ_RESET 0x80 |
76 | #define OPL3_TIMER1_MASK 0x40 |
77 | #define OPL3_TIMER2_MASK 0x20 |
78 | #define OPL3_TIMER1_START 0x01 |
79 | #define OPL3_TIMER2_START 0x02 |
80 | |
81 | #define OPL3_REG_CONNECTION_SELECT 0x04 /* Right side */ |
82 | #define OPL3_LEFT_4OP_0 0x01 |
83 | #define OPL3_LEFT_4OP_1 0x02 |
84 | #define OPL3_LEFT_4OP_2 0x04 |
85 | #define OPL3_RIGHT_4OP_0 0x08 |
86 | #define OPL3_RIGHT_4OP_1 0x10 |
87 | #define OPL3_RIGHT_4OP_2 0x20 |
88 | |
89 | #define OPL3_REG_MODE 0x05 /* Right side */ |
90 | #define OPL3_OPL3_ENABLE 0x01 /* OPL3 mode */ |
91 | #define OPL3_OPL4_ENABLE 0x02 /* OPL4 mode */ |
92 | |
93 | #define OPL3_REG_KBD_SPLIT 0x08 /* Left side */ |
94 | #define OPL3_COMPOSITE_SINE_WAVE_MODE 0x80 /* Don't use with OPL-3? */ |
95 | #define OPL3_KEYBOARD_SPLIT 0x40 |
96 | |
97 | #define OPL3_REG_PERCUSSION 0xbd /* Left side only */ |
98 | #define OPL3_TREMOLO_DEPTH 0x80 |
99 | #define OPL3_VIBRATO_DEPTH 0x40 |
100 | #define OPL3_PERCUSSION_ENABLE 0x20 |
101 | #define OPL3_BASSDRUM_ON 0x10 |
102 | #define OPL3_SNAREDRUM_ON 0x08 |
103 | #define OPL3_TOMTOM_ON 0x04 |
104 | #define OPL3_CYMBAL_ON 0x02 |
105 | #define OPL3_HIHAT_ON 0x01 |
106 | |
107 | /* |
108 | * Offsets to the register banks for operators. To get the |
109 | * register number just add the operator offset to the bank offset |
110 | * |
111 | * AM/VIB/EG/KSR/Multiple (0x20 to 0x35) |
112 | */ |
113 | #define OPL3_REG_AM_VIB 0x20 |
114 | #define OPL3_TREMOLO_ON 0x80 |
115 | #define OPL3_VIBRATO_ON 0x40 |
116 | #define OPL3_SUSTAIN_ON 0x20 |
117 | #define OPL3_KSR 0x10 /* Key scaling rate */ |
118 | #define OPL3_MULTIPLE_MASK 0x0f /* Frequency multiplier */ |
119 | |
120 | /* |
121 | * KSL/Total level (0x40 to 0x55) |
122 | */ |
123 | #define OPL3_REG_KSL_LEVEL 0x40 |
124 | #define OPL3_KSL_MASK 0xc0 /* Envelope scaling bits */ |
125 | #define OPL3_TOTAL_LEVEL_MASK 0x3f /* Strength (volume) of OP */ |
126 | |
127 | /* |
128 | * Attack / Decay rate (0x60 to 0x75) |
129 | */ |
130 | #define OPL3_REG_ATTACK_DECAY 0x60 |
131 | #define OPL3_ATTACK_MASK 0xf0 |
132 | #define OPL3_DECAY_MASK 0x0f |
133 | |
134 | /* |
135 | * Sustain level / Release rate (0x80 to 0x95) |
136 | */ |
137 | #define OPL3_REG_SUSTAIN_RELEASE 0x80 |
138 | #define OPL3_SUSTAIN_MASK 0xf0 |
139 | #define OPL3_RELEASE_MASK 0x0f |
140 | |
141 | /* |
142 | * Wave select (0xE0 to 0xF5) |
143 | */ |
144 | #define OPL3_REG_WAVE_SELECT 0xe0 |
145 | #define OPL3_WAVE_SELECT_MASK 0x07 |
146 | |
147 | /* |
148 | * Offsets to the register banks for voices. Just add to the |
149 | * voice number to get the register number. |
150 | * |
151 | * F-Number low bits (0xA0 to 0xA8). |
152 | */ |
153 | #define OPL3_REG_FNUM_LOW 0xa0 |
154 | |
155 | /* |
156 | * F-number high bits / Key on / Block (octave) (0xB0 to 0xB8) |
157 | */ |
158 | #define OPL3_REG_KEYON_BLOCK 0xb0 |
159 | #define OPL3_KEYON_BIT 0x20 |
160 | #define OPL3_BLOCKNUM_MASK 0x1c |
161 | #define OPL3_FNUM_HIGH_MASK 0x03 |
162 | |
163 | /* |
164 | * Feedback / Connection (0xc0 to 0xc8) |
165 | * |
166 | * These registers have two new bits when the OPL-3 mode |
167 | * is selected. These bits controls connecting the voice |
168 | * to the stereo channels. For 4 OP voices this bit is |
169 | * defined in the second half of the voice (add 3 to the |
170 | * register offset). |
171 | * |
172 | * For 4 OP voices the connection bit is used in the |
173 | * both halves (gives 4 ways to connect the operators). |
174 | */ |
175 | #define OPL3_REG_FEEDBACK_CONNECTION 0xc0 |
176 | #define OPL3_FEEDBACK_MASK 0x0e /* Valid just for 1st OP of a voice */ |
177 | #define OPL3_CONNECTION_BIT 0x01 |
178 | /* |
179 | * In the 4 OP mode there is four possible configurations how the |
180 | * operators can be connected together (in 2 OP modes there is just |
181 | * AM or FM). The 4 OP connection mode is defined by the rightmost |
182 | * bit of the FEEDBACK_CONNECTION (0xC0-0xC8) on the both halves. |
183 | * |
184 | * First half Second half Mode |
185 | * |
186 | * +---+ |
187 | * v | |
188 | * 0 0 >+-1-+--2--3--4--> |
189 | * |
190 | * |
191 | * |
192 | * +---+ |
193 | * | | |
194 | * 0 1 >+-1-+--2-+ |
195 | * |-> |
196 | * >--3----4-+ |
197 | * |
198 | * +---+ |
199 | * | | |
200 | * 1 0 >+-1-+-----+ |
201 | * |-> |
202 | * >--2--3--4-+ |
203 | * |
204 | * +---+ |
205 | * | | |
206 | * 1 1 >+-1-+--+ |
207 | * | |
208 | * >--2--3-+-> |
209 | * | |
210 | * >--4----+ |
211 | */ |
212 | #define OPL3_STEREO_BITS 0x30 /* OPL-3 only */ |
213 | #define OPL3_VOICE_TO_LEFT 0x10 |
214 | #define OPL3_VOICE_TO_RIGHT 0x20 |
215 | |
216 | /* |
217 | |
218 | */ |
219 | |
220 | #define OPL3_LEFT 0x0000 |
221 | #define OPL3_RIGHT 0x0100 |
222 | |
223 | #define OPL3_HW_AUTO 0x0000 |
224 | #define OPL3_HW_OPL2 0x0200 |
225 | #define OPL3_HW_OPL3 0x0300 |
226 | #define OPL3_HW_OPL3_SV 0x0301 /* S3 SonicVibes */ |
227 | #define OPL3_HW_OPL3_CS 0x0302 /* CS4232/CS4236+ */ |
228 | #define OPL3_HW_OPL3_FM801 0x0303 /* FM801 */ |
229 | #define OPL3_HW_OPL3_CS4281 0x0304 /* CS4281 */ |
230 | #define OPL3_HW_OPL4 0x0400 /* YMF278B/YMF295 */ |
231 | #define OPL3_HW_OPL4_ML 0x0401 /* YMF704/YMF721 */ |
232 | #define OPL3_HW_MASK 0xff00 |
233 | |
234 | #define MAX_OPL2_VOICES 9 |
235 | #define MAX_OPL3_VOICES 18 |
236 | |
237 | struct snd_opl3; |
238 | |
239 | /* |
240 | * Instrument record, aka "Patch" |
241 | */ |
242 | |
243 | /* FM operator */ |
244 | struct fm_operator { |
245 | unsigned char am_vib; |
246 | unsigned char ksl_level; |
247 | unsigned char attack_decay; |
248 | unsigned char sustain_release; |
249 | unsigned char wave_select; |
250 | } __attribute__((packed)); |
251 | |
252 | /* Instrument data */ |
253 | struct fm_instrument { |
254 | struct fm_operator op[4]; |
255 | unsigned char feedback_connection[2]; |
256 | unsigned char echo_delay; |
257 | unsigned char echo_atten; |
258 | unsigned char chorus_spread; |
259 | unsigned char trnsps; |
260 | unsigned char fix_dur; |
261 | unsigned char modes; |
262 | unsigned char fix_key; |
263 | }; |
264 | |
265 | /* type */ |
266 | #define FM_PATCH_OPL2 0x01 /* OPL2 2 operators FM instrument */ |
267 | #define FM_PATCH_OPL3 0x02 /* OPL3 4 operators FM instrument */ |
268 | |
269 | /* Instrument record */ |
270 | struct fm_patch { |
271 | unsigned char prog; |
272 | unsigned char bank; |
273 | unsigned char type; |
274 | struct fm_instrument inst; |
275 | char name[24]; |
276 | struct fm_patch *next; |
277 | }; |
278 | |
279 | |
280 | /* |
281 | * A structure to keep track of each hardware voice |
282 | */ |
283 | struct snd_opl3_voice { |
284 | int state; /* status */ |
285 | #define SNDRV_OPL3_ST_OFF 0 /* Not playing */ |
286 | #define SNDRV_OPL3_ST_ON_2OP 1 /* 2op voice is allocated */ |
287 | #define SNDRV_OPL3_ST_ON_4OP 2 /* 4op voice is allocated */ |
288 | #define SNDRV_OPL3_ST_NOT_AVAIL -1 /* voice is not available */ |
289 | |
290 | unsigned int time; /* An allocation time */ |
291 | unsigned char note; /* Note currently assigned to this voice */ |
292 | |
293 | unsigned long note_off; /* note-off time */ |
294 | int note_off_check; /* check note-off time */ |
295 | |
296 | unsigned char keyon_reg; /* KON register shadow */ |
297 | |
298 | struct snd_midi_channel *chan; /* Midi channel for this note */ |
299 | }; |
300 | |
301 | struct snd_opl3 { |
302 | unsigned long l_port; |
303 | unsigned long r_port; |
304 | struct resource *res_l_port; |
305 | struct resource *res_r_port; |
306 | unsigned short hardware; |
307 | /* hardware access */ |
308 | void (*command) (struct snd_opl3 * opl3, unsigned short cmd, unsigned char val); |
309 | unsigned short timer_enable; |
310 | int seq_dev_num; /* sequencer device number */ |
311 | struct snd_timer *timer1; |
312 | struct snd_timer *timer2; |
313 | spinlock_t timer_lock; |
314 | |
315 | void *private_data; |
316 | void (*private_free)(struct snd_opl3 *); |
317 | |
318 | struct snd_hwdep *hwdep; |
319 | spinlock_t reg_lock; |
320 | struct snd_card *card; /* The card that this belongs to */ |
321 | unsigned char fm_mode; /* OPL mode, see SNDRV_DM_FM_MODE_XXX */ |
322 | unsigned char rhythm; /* percussion mode flag */ |
323 | unsigned char max_voices; /* max number of voices */ |
324 | #if defined(CONFIG_SND_SEQUENCER) || defined(CONFIG_SND_SEQUENCER_MODULE) |
325 | #define SNDRV_OPL3_MODE_SYNTH 0 /* OSS - voices allocated by application */ |
326 | #define SNDRV_OPL3_MODE_SEQ 1 /* ALSA - driver handles voice allocation */ |
327 | int synth_mode; /* synth mode */ |
328 | int seq_client; |
329 | |
330 | struct snd_seq_device *seq_dev; /* sequencer device */ |
331 | struct snd_midi_channel_set * chset; |
332 | |
333 | #ifdef CONFIG_SND_SEQUENCER_OSS |
334 | struct snd_seq_device *oss_seq_dev; /* OSS sequencer device */ |
335 | struct snd_midi_channel_set * oss_chset; |
336 | #endif |
337 | |
338 | #define OPL3_PATCH_HASH_SIZE 32 |
339 | struct fm_patch *patch_table[OPL3_PATCH_HASH_SIZE]; |
340 | |
341 | struct snd_opl3_voice voices[MAX_OPL3_VOICES]; /* Voices (OPL3 'channel') */ |
342 | int use_time; /* allocation counter */ |
343 | |
344 | unsigned short connection_reg; /* connection reg shadow */ |
345 | unsigned char drum_reg; /* percussion reg shadow */ |
346 | |
347 | spinlock_t voice_lock; /* Lock for voice access */ |
348 | |
349 | struct timer_list tlist; /* timer for note-offs and effects */ |
350 | int sys_timer_status; /* system timer run status */ |
351 | spinlock_t sys_timer_lock; /* Lock for system timer access */ |
352 | #endif |
353 | }; |
354 | |
355 | /* opl3.c */ |
356 | void snd_opl3_interrupt(struct snd_hwdep * hw); |
357 | int snd_opl3_new(struct snd_card *card, unsigned short hardware, |
358 | struct snd_opl3 **ropl3); |
359 | int snd_opl3_init(struct snd_opl3 *opl3); |
360 | int snd_opl3_create(struct snd_card *card, |
361 | unsigned long l_port, unsigned long r_port, |
362 | unsigned short hardware, |
363 | int integrated, |
364 | struct snd_opl3 ** opl3); |
365 | int snd_opl3_timer_new(struct snd_opl3 * opl3, int timer1_dev, int timer2_dev); |
366 | int snd_opl3_hwdep_new(struct snd_opl3 * opl3, int device, int seq_device, |
367 | struct snd_hwdep ** rhwdep); |
368 | |
369 | /* opl3_synth */ |
370 | int snd_opl3_open(struct snd_hwdep * hw, struct file *file); |
371 | int snd_opl3_ioctl(struct snd_hwdep * hw, struct file *file, |
372 | unsigned int cmd, unsigned long arg); |
373 | int snd_opl3_release(struct snd_hwdep * hw, struct file *file); |
374 | |
375 | void snd_opl3_reset(struct snd_opl3 * opl3); |
376 | |
377 | #if defined(CONFIG_SND_SEQUENCER) || defined(CONFIG_SND_SEQUENCER_MODULE) |
378 | long snd_opl3_write(struct snd_hwdep *hw, const char __user *buf, long count, |
379 | loff_t *offset); |
380 | int snd_opl3_load_patch(struct snd_opl3 *opl3, |
381 | int prog, int bank, int type, |
382 | const char *name, |
383 | const unsigned char *ext, |
384 | const unsigned char *data); |
385 | struct fm_patch *snd_opl3_find_patch(struct snd_opl3 *opl3, int prog, int bank, |
386 | int create_patch); |
387 | void snd_opl3_clear_patches(struct snd_opl3 *opl3); |
388 | #else |
389 | #define snd_opl3_write NULL |
390 | static inline void snd_opl3_clear_patches(struct snd_opl3 *opl3) {} |
391 | #endif |
392 | |
393 | #endif /* __SOUND_OPL3_H */ |
394 |
Branches:
ben-wpan
ben-wpan-stefan
javiroman/ks7010
jz-2.6.34
jz-2.6.34-rc5
jz-2.6.34-rc6
jz-2.6.34-rc7
jz-2.6.35
jz-2.6.36
jz-2.6.37
jz-2.6.38
jz-2.6.39
jz-3.0
jz-3.1
jz-3.11
jz-3.12
jz-3.13
jz-3.15
jz-3.16
jz-3.18-dt
jz-3.2
jz-3.3
jz-3.4
jz-3.5
jz-3.6
jz-3.6-rc2-pwm
jz-3.9
jz-3.9-clk
jz-3.9-rc8
jz47xx
jz47xx-2.6.38
master
Tags:
od-2011-09-04
od-2011-09-18
v2.6.34-rc5
v2.6.34-rc6
v2.6.34-rc7
v3.9