Root/
1 | # This a generic Palo configuration file. For more information about how |
2 | # it works try 'palo -?'. |
3 | # |
4 | # Most people using 'make palo' want a bootable file, usable for |
5 | # network or tape booting for example. |
6 | --init-tape=lifimage |
7 | --recoverykernel=vmlinux |
8 | |
9 | ########## Pick your ROOT here! ########## |
10 | # You need at least one 'root='! |
11 | # |
12 | # If you want a root ramdisk, use the next 2 lines |
13 | # (Edit the ramdisk image name!!!!) |
14 | --ramdisk=ram-disk-image-file |
15 | --commandline=0/vmlinux HOME=/ root=/dev/ram initrd=0/ramdisk |
16 | |
17 | # If you want NFS root, use the following command line (Edit the HOSTNAME!!!) |
18 | #--commandline=0/vmlinux HOME=/ root=/dev/nfs nfsroot=HOSTNAME ip=bootp |
19 | |
20 | # If you have root on a disk partition, use this (Edit the partition name!!!) |
21 | #--commandline=0/vmlinux HOME=/ root=/dev/sda1 |
22 |
Branches:
ben-wpan
ben-wpan-stefan
javiroman/ks7010
jz-2.6.34
jz-2.6.34-rc5
jz-2.6.34-rc6
jz-2.6.34-rc7
jz-2.6.35
jz-2.6.36
jz-2.6.37
jz-2.6.38
jz-2.6.39
jz-3.0
jz-3.1
jz-3.11
jz-3.12
jz-3.13
jz-3.15
jz-3.16
jz-3.18-dt
jz-3.2
jz-3.3
jz-3.4
jz-3.5
jz-3.6
jz-3.6-rc2-pwm
jz-3.9
jz-3.9-clk
jz-3.9-rc8
jz47xx
jz47xx-2.6.38
master
Tags:
od-2011-09-04
od-2011-09-18
v2.6.34-rc5
v2.6.34-rc6
v2.6.34-rc7
v3.9