Root/
1 | if ARCH_AT91 |
2 | |
3 | config HAVE_AT91_DATAFLASH_CARD |
4 | bool |
5 | |
6 | config HAVE_NAND_ATMEL_BUSWIDTH_16 |
7 | bool |
8 | |
9 | config HAVE_AT91_USART3 |
10 | bool |
11 | |
12 | config HAVE_AT91_USART4 |
13 | bool |
14 | |
15 | config HAVE_AT91_USART5 |
16 | bool |
17 | |
18 | menu "Atmel AT91 System-on-Chip" |
19 | |
20 | choice |
21 | prompt "Atmel AT91 Processor" |
22 | |
23 | config ARCH_AT91RM9200 |
24 | bool "AT91RM9200" |
25 | select CPU_ARM920T |
26 | select GENERIC_CLOCKEVENTS |
27 | select HAVE_AT91_USART3 |
28 | |
29 | config ARCH_AT91SAM9260 |
30 | bool "AT91SAM9260 or AT91SAM9XE" |
31 | select CPU_ARM926T |
32 | select GENERIC_CLOCKEVENTS |
33 | select HAVE_AT91_USART3 |
34 | select HAVE_AT91_USART4 |
35 | select HAVE_AT91_USART5 |
36 | select HAVE_NET_MACB |
37 | |
38 | config ARCH_AT91SAM9261 |
39 | bool "AT91SAM9261" |
40 | select CPU_ARM926T |
41 | select GENERIC_CLOCKEVENTS |
42 | select HAVE_FB_ATMEL |
43 | |
44 | config ARCH_AT91SAM9G10 |
45 | bool "AT91SAM9G10" |
46 | select CPU_ARM926T |
47 | select GENERIC_CLOCKEVENTS |
48 | select HAVE_FB_ATMEL |
49 | |
50 | config ARCH_AT91SAM9263 |
51 | bool "AT91SAM9263" |
52 | select CPU_ARM926T |
53 | select GENERIC_CLOCKEVENTS |
54 | select HAVE_FB_ATMEL |
55 | select HAVE_NET_MACB |
56 | |
57 | config ARCH_AT91SAM9RL |
58 | bool "AT91SAM9RL" |
59 | select CPU_ARM926T |
60 | select GENERIC_CLOCKEVENTS |
61 | select HAVE_AT91_USART3 |
62 | select HAVE_FB_ATMEL |
63 | |
64 | config ARCH_AT91SAM9G20 |
65 | bool "AT91SAM9G20" |
66 | select CPU_ARM926T |
67 | select GENERIC_CLOCKEVENTS |
68 | select HAVE_AT91_USART3 |
69 | select HAVE_AT91_USART4 |
70 | select HAVE_AT91_USART5 |
71 | select HAVE_NET_MACB |
72 | |
73 | config ARCH_AT91SAM9G45 |
74 | bool "AT91SAM9G45" |
75 | select CPU_ARM926T |
76 | select GENERIC_CLOCKEVENTS |
77 | select HAVE_AT91_USART3 |
78 | select HAVE_FB_ATMEL |
79 | select HAVE_NET_MACB |
80 | |
81 | config ARCH_AT91CAP9 |
82 | bool "AT91CAP9" |
83 | select CPU_ARM926T |
84 | select GENERIC_CLOCKEVENTS |
85 | select HAVE_FB_ATMEL |
86 | |
87 | config ARCH_AT572D940HF |
88 | bool "AT572D940HF" |
89 | select CPU_ARM926T |
90 | select GENERIC_CLOCKEVENTS |
91 | |
92 | config ARCH_AT91X40 |
93 | bool "AT91x40" |
94 | select ARCH_USES_GETTIMEOFFSET |
95 | |
96 | endchoice |
97 | |
98 | config AT91_PMC_UNIT |
99 | bool |
100 | default !ARCH_AT91X40 |
101 | |
102 | # ---------------------------------------------------------- |
103 | |
104 | if ARCH_AT91RM9200 |
105 | |
106 | comment "AT91RM9200 Board Type" |
107 | |
108 | config MACH_ONEARM |
109 | bool "Ajeco 1ARM Single Board Computer" |
110 | help |
111 | Select this if you are using Ajeco's 1ARM Single Board Computer. |
112 | <http://www.ajeco.fi/> |
113 | |
114 | config ARCH_AT91RM9200DK |
115 | bool "Atmel AT91RM9200-DK Development board" |
116 | select HAVE_AT91_DATAFLASH_CARD |
117 | help |
118 | Select this if you are using Atmel's AT91RM9200-DK Development board. |
119 | (Discontinued) |
120 | |
121 | config MACH_AT91RM9200EK |
122 | bool "Atmel AT91RM9200-EK Evaluation Kit" |
123 | select HAVE_AT91_DATAFLASH_CARD |
124 | help |
125 | Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit. |
126 | <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507> |
127 | |
128 | config MACH_CSB337 |
129 | bool "Cogent CSB337" |
130 | help |
131 | Select this if you are using Cogent's CSB337 board. |
132 | <http://www.cogcomp.com/csb_csb337.htm> |
133 | |
134 | config MACH_CSB637 |
135 | bool "Cogent CSB637" |
136 | help |
137 | Select this if you are using Cogent's CSB637 board. |
138 | <http://www.cogcomp.com/csb_csb637.htm> |
139 | |
140 | config MACH_CARMEVA |
141 | bool "Conitec ARM&EVA" |
142 | help |
143 | Select this if you are using Conitec's AT91RM9200-MCU-Module. |
144 | <http://www.conitec.net/english/linuxboard.php> |
145 | |
146 | config MACH_ATEB9200 |
147 | bool "Embest ATEB9200" |
148 | help |
149 | Select this if you are using Embest's ATEB9200 board. |
150 | <http://www.embedinfo.com/english/product/ATEB9200.asp> |
151 | |
152 | config MACH_KB9200 |
153 | bool "KwikByte KB920x" |
154 | help |
155 | Select this if you are using KwikByte's KB920x board. |
156 | <http://www.kwikbyte.com/KB9202.html> |
157 | |
158 | config MACH_PICOTUX2XX |
159 | bool "picotux 200" |
160 | help |
161 | Select this if you are using a picotux 200. |
162 | <http://www.picotux.com/> |
163 | |
164 | config MACH_KAFA |
165 | bool "Sperry-Sun KAFA board" |
166 | help |
167 | Select this if you are using Sperry-Sun's KAFA board. |
168 | |
169 | config MACH_ECBAT91 |
170 | bool "emQbit ECB_AT91 SBC" |
171 | select HAVE_AT91_DATAFLASH_CARD |
172 | help |
173 | Select this if you are using emQbit's ECB_AT91 board. |
174 | <http://wiki.emqbit.com/free-ecb-at91> |
175 | |
176 | config MACH_YL9200 |
177 | bool "ucDragon YL-9200" |
178 | help |
179 | Select this if you are using the ucDragon YL-9200 board. |
180 | |
181 | config MACH_CPUAT91 |
182 | bool "Eukrea CPUAT91" |
183 | help |
184 | Select this if you are using the Eukrea Electromatique's |
185 | CPUAT91 board <http://www.eukrea.com/>. |
186 | |
187 | config MACH_ECO920 |
188 | bool "eco920" |
189 | help |
190 | Select this if you are using the eco920 board |
191 | |
192 | endif |
193 | |
194 | # ---------------------------------------------------------- |
195 | |
196 | if ARCH_AT91SAM9260 |
197 | |
198 | comment "AT91SAM9260 Variants" |
199 | |
200 | config ARCH_AT91SAM9260_SAM9XE |
201 | bool "AT91SAM9XE" |
202 | help |
203 | Select this if you are using Atmel's AT91SAM9XE System-on-Chip. |
204 | They are basically AT91SAM9260s with various sizes of embedded Flash. |
205 | |
206 | comment "AT91SAM9260 / AT91SAM9XE Board Type" |
207 | |
208 | config MACH_AT91SAM9260EK |
209 | bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit" |
210 | select HAVE_AT91_DATAFLASH_CARD |
211 | select HAVE_NAND_ATMEL_BUSWIDTH_16 |
212 | help |
213 | Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit |
214 | <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933> |
215 | |
216 | config MACH_CAM60 |
217 | bool "KwikByte KB9260 (CAM60) board" |
218 | help |
219 | Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260. |
220 | <http://www.kwikbyte.com/KB9260.html> |
221 | |
222 | config MACH_SAM9_L9260 |
223 | bool "Olimex SAM9-L9260 board" |
224 | select HAVE_AT91_DATAFLASH_CARD |
225 | help |
226 | Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260. |
227 | <http://www.olimex.com/dev/sam9-L9260.html> |
228 | |
229 | config MACH_AFEB9260 |
230 | bool "Custom afeb9260 board v1" |
231 | help |
232 | Select this if you are using custom afeb9260 board based on |
233 | open hardware design. Select this for revision 1 of the board. |
234 | <svn://194.85.238.22/home/users/george/svn/arm9eb> |
235 | <http://groups.google.com/group/arm9fpga-evolution-board> |
236 | |
237 | config MACH_USB_A9260 |
238 | bool "CALAO USB-A9260" |
239 | help |
240 | Select this if you are using a Calao Systems USB-A9260. |
241 | <http://www.calao-systems.com> |
242 | |
243 | config MACH_QIL_A9260 |
244 | bool "CALAO QIL-A9260 board" |
245 | help |
246 | Select this if you are using a Calao Systems QIL-A9260 Board. |
247 | <http://www.calao-systems.com> |
248 | |
249 | config MACH_CPU9260 |
250 | bool "Eukrea CPU9260 board" |
251 | help |
252 | Select this if you are using a Eukrea Electromatique's |
253 | CPU9260 Board <http://www.eukrea.com/> |
254 | |
255 | config MACH_FLEXIBITY |
256 | bool "Flexibity Connect board" |
257 | help |
258 | Select this if you are using Flexibity Connect board |
259 | <http://www.flexibity.com> |
260 | |
261 | endif |
262 | |
263 | # ---------------------------------------------------------- |
264 | |
265 | if ARCH_AT91SAM9261 |
266 | |
267 | comment "AT91SAM9261 Board Type" |
268 | |
269 | config MACH_AT91SAM9261EK |
270 | bool "Atmel AT91SAM9261-EK Evaluation Kit" |
271 | select HAVE_AT91_DATAFLASH_CARD |
272 | select HAVE_NAND_ATMEL_BUSWIDTH_16 |
273 | help |
274 | Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit. |
275 | <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820> |
276 | |
277 | endif |
278 | |
279 | # ---------------------------------------------------------- |
280 | |
281 | if ARCH_AT91SAM9G10 |
282 | |
283 | comment "AT91SAM9G10 Board Type" |
284 | |
285 | config MACH_AT91SAM9G10EK |
286 | bool "Atmel AT91SAM9G10-EK Evaluation Kit" |
287 | select HAVE_AT91_DATAFLASH_CARD |
288 | select HAVE_NAND_ATMEL_BUSWIDTH_16 |
289 | help |
290 | Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit. |
291 | <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588> |
292 | |
293 | endif |
294 | |
295 | # ---------------------------------------------------------- |
296 | |
297 | if ARCH_AT91SAM9263 |
298 | |
299 | comment "AT91SAM9263 Board Type" |
300 | |
301 | config MACH_AT91SAM9263EK |
302 | bool "Atmel AT91SAM9263-EK Evaluation Kit" |
303 | select HAVE_AT91_DATAFLASH_CARD |
304 | select HAVE_NAND_ATMEL_BUSWIDTH_16 |
305 | help |
306 | Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit. |
307 | <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057> |
308 | |
309 | config MACH_USB_A9263 |
310 | bool "CALAO USB-A9263" |
311 | help |
312 | Select this if you are using a Calao Systems USB-A9263. |
313 | <http://www.calao-systems.com> |
314 | |
315 | config MACH_NEOCORE926 |
316 | bool "Adeneo NEOCORE926" |
317 | select HAVE_AT91_DATAFLASH_CARD |
318 | help |
319 | Select this if you are using the Adeneo Neocore 926 board. |
320 | |
321 | endif |
322 | |
323 | # ---------------------------------------------------------- |
324 | |
325 | if ARCH_AT91SAM9RL |
326 | |
327 | comment "AT91SAM9RL Board Type" |
328 | |
329 | config MACH_AT91SAM9RLEK |
330 | bool "Atmel AT91SAM9RL-EK Evaluation Kit" |
331 | help |
332 | Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit. |
333 | |
334 | endif |
335 | |
336 | # ---------------------------------------------------------- |
337 | |
338 | if ARCH_AT91SAM9G20 |
339 | |
340 | comment "AT91SAM9G20 Board Type" |
341 | |
342 | config MACH_AT91SAM9G20EK |
343 | bool "Atmel AT91SAM9G20-EK Evaluation Kit" |
344 | select HAVE_AT91_DATAFLASH_CARD |
345 | select HAVE_NAND_ATMEL_BUSWIDTH_16 |
346 | help |
347 | Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit |
348 | that embeds only one SD/MMC slot. |
349 | |
350 | config MACH_AT91SAM9G20EK_2MMC |
351 | depends on MACH_AT91SAM9G20EK |
352 | bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots" |
353 | select HAVE_NAND_ATMEL_BUSWIDTH_16 |
354 | help |
355 | Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit |
356 | with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and |
357 | onwards. |
358 | |
359 | config MACH_CPU9G20 |
360 | bool "Eukrea CPU9G20 board" |
361 | help |
362 | Select this if you are using a Eukrea Electromatique's |
363 | CPU9G20 Board <http://www.eukrea.com/> |
364 | |
365 | config MACH_PORTUXG20 |
366 | bool "taskit PortuxG20" |
367 | help |
368 | Select this if you are using taskit's PortuxG20. |
369 | <http://www.taskit.de/en/> |
370 | |
371 | config MACH_STAMP9G20 |
372 | bool "taskit Stamp9G20 CPU module" |
373 | help |
374 | Select this if you are using taskit's Stamp9G20 CPU module on its |
375 | evaluation board. |
376 | <http://www.taskit.de/en/> |
377 | |
378 | config MACH_PCONTROL_G20 |
379 | bool "PControl G20 CPU module" |
380 | help |
381 | Select this if you are using taskit's Stamp9G20 CPU module on this |
382 | carrier board, beeing the decentralized unit of a building automation |
383 | system; featuring nvram, eth-switch, iso-rs485, display, io |
384 | endif |
385 | |
386 | if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20) |
387 | comment "AT91SAM9260/AT91SAM9G20 boards" |
388 | |
389 | config MACH_SNAPPER_9260 |
390 | bool "Bluewater Systems Snapper 9260/9G20 module" |
391 | help |
392 | Select this if you are using the Bluewater Systems Snapper 9260 or |
393 | Snapper 9G20 modules. |
394 | <http://www.bluewatersys.com/> |
395 | endif |
396 | |
397 | # ---------------------------------------------------------- |
398 | |
399 | if ARCH_AT91SAM9G45 |
400 | |
401 | comment "AT91SAM9G45 Board Type" |
402 | |
403 | config MACH_AT91SAM9M10G45EK |
404 | bool "Atmel AT91SAM9M10G45-EK Evaluation Kits" |
405 | select HAVE_NAND_ATMEL_BUSWIDTH_16 |
406 | help |
407 | Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit. |
408 | "ES" at the end of the name means that this board is an |
409 | Engineering Sample. |
410 | |
411 | endif |
412 | |
413 | # ---------------------------------------------------------- |
414 | |
415 | if ARCH_AT91CAP9 |
416 | |
417 | comment "AT91CAP9 Board Type" |
418 | |
419 | config MACH_AT91CAP9ADK |
420 | bool "Atmel AT91CAP9A-DK Evaluation Kit" |
421 | select HAVE_AT91_DATAFLASH_CARD |
422 | select HAVE_NAND_ATMEL_BUSWIDTH_16 |
423 | help |
424 | Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit. |
425 | <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138> |
426 | |
427 | endif |
428 | |
429 | # ---------------------------------------------------------- |
430 | |
431 | if ARCH_AT572D940HF |
432 | |
433 | comment "AT572D940HF Board Type" |
434 | |
435 | config MACH_AT572D940HFEB |
436 | bool "AT572D940HF-EK" |
437 | depends on ARCH_AT572D940HF |
438 | select HAVE_AT91_DATAFLASH_CARD |
439 | select HAVE_NAND_ATMEL_BUSWIDTH_16 |
440 | help |
441 | Select this if you are using Atmel's AT572D940HF-EK evaluation kit. |
442 | <http://www.atmel.com/products/diopsis/default.asp> |
443 | |
444 | endif |
445 | |
446 | # ---------------------------------------------------------- |
447 | |
448 | if ARCH_AT91X40 |
449 | |
450 | comment "AT91X40 Board Type" |
451 | |
452 | config MACH_AT91EB01 |
453 | bool "Atmel AT91EB01 Evaluation Kit" |
454 | help |
455 | Select this if you are using Atmel's AT91EB01 Evaluation Kit. |
456 | It is also a popular target for simulators such as GDB's |
457 | ARM simulator (commonly known as the ARMulator) and the |
458 | Skyeye simulator. |
459 | |
460 | endif |
461 | |
462 | # ---------------------------------------------------------- |
463 | |
464 | comment "AT91 Board Options" |
465 | |
466 | config MTD_AT91_DATAFLASH_CARD |
467 | bool "Enable DataFlash Card support" |
468 | depends on HAVE_AT91_DATAFLASH_CARD |
469 | help |
470 | Enable support for the DataFlash card. |
471 | |
472 | config MTD_NAND_ATMEL_BUSWIDTH_16 |
473 | bool "Enable 16-bit data bus interface to NAND flash" |
474 | depends on HAVE_NAND_ATMEL_BUSWIDTH_16 |
475 | help |
476 | On AT91SAM926x boards both types of NAND flash can be present |
477 | (8 and 16 bit data bus width). |
478 | |
479 | # ---------------------------------------------------------- |
480 | |
481 | comment "AT91 Feature Selections" |
482 | |
483 | config AT91_PROGRAMMABLE_CLOCKS |
484 | bool "Programmable Clocks" |
485 | help |
486 | Select this if you need to program one or more of the PCK0..PCK3 |
487 | programmable clock outputs. |
488 | |
489 | config AT91_SLOW_CLOCK |
490 | bool "Suspend-to-RAM disables main oscillator" |
491 | depends on SUSPEND |
492 | help |
493 | Select this if you want Suspend-to-RAM to save the most power |
494 | possible (without powering off the CPU) by disabling the PLLs |
495 | and main oscillator so that only the 32 KiHz clock is available. |
496 | |
497 | When only that slow-clock is available, some peripherals lose |
498 | functionality. Many can't issue wakeup events unless faster |
499 | clocks are available. Some lose their operating state and |
500 | need to be completely re-initialized. |
501 | |
502 | config AT91_TIMER_HZ |
503 | int "Kernel HZ (jiffies per second)" |
504 | range 32 1024 |
505 | depends on ARCH_AT91 |
506 | default "128" if ARCH_AT91RM9200 |
507 | default "100" |
508 | help |
509 | On AT91rm9200 chips where you're using a system clock derived |
510 | from the 32768 Hz hardware clock, this tick rate should divide |
511 | it exactly: use a power-of-two value, such as 128 or 256, to |
512 | reduce timing errors caused by rounding. |
513 | |
514 | On AT91sam926x chips, or otherwise when using a higher precision |
515 | system clock (of at least several MHz), rounding is less of a |
516 | problem so it can be safer to use a decimal values like 100. |
517 | |
518 | choice |
519 | prompt "Select a UART for early kernel messages" |
520 | |
521 | config AT91_EARLY_DBGU |
522 | bool "DBGU" |
523 | |
524 | config AT91_EARLY_USART0 |
525 | bool "USART0" |
526 | |
527 | config AT91_EARLY_USART1 |
528 | bool "USART1" |
529 | |
530 | config AT91_EARLY_USART2 |
531 | bool "USART2" |
532 | depends on ! ARCH_AT91X40 |
533 | |
534 | config AT91_EARLY_USART3 |
535 | bool "USART3" |
536 | depends on HAVE_AT91_USART3 |
537 | |
538 | config AT91_EARLY_USART4 |
539 | bool "USART4" |
540 | depends on HAVE_AT91_USART4 |
541 | |
542 | config AT91_EARLY_USART5 |
543 | bool "USART5" |
544 | depends on HAVE_AT91_USART5 |
545 | |
546 | endchoice |
547 | |
548 | endmenu |
549 | |
550 | endif |
551 |
Branches:
ben-wpan
ben-wpan-stefan
javiroman/ks7010
jz-2.6.34
jz-2.6.34-rc5
jz-2.6.34-rc6
jz-2.6.34-rc7
jz-2.6.35
jz-2.6.36
jz-2.6.37
jz-2.6.38
jz-2.6.39
jz-3.0
jz-3.1
jz-3.11
jz-3.12
jz-3.13
jz-3.15
jz-3.16
jz-3.18-dt
jz-3.2
jz-3.3
jz-3.4
jz-3.5
jz-3.6
jz-3.6-rc2-pwm
jz-3.9
jz-3.9-clk
jz-3.9-rc8
jz47xx
jz47xx-2.6.38
master
Tags:
od-2011-09-04
od-2011-09-18
v2.6.34-rc5
v2.6.34-rc6
v2.6.34-rc7
v3.9