Root/firmware/Makefile

1#
2# kbuild file for firmware/
3#
4
5# Create $(fwabs) from $(CONFIG_EXTRA_FIRMWARE_DIR) -- if it doesn't have a
6# leading /, it's relative to $(srctree).
7fwdir := $(subst ",,$(CONFIG_EXTRA_FIRMWARE_DIR))
8fwabs := $(addprefix $(srctree)/,$(filter-out /%,$(fwdir)))$(filter /%,$(fwdir))
9
10fw-external-y := $(subst ",,$(CONFIG_EXTRA_FIRMWARE))
11
12# There are three cases to care about:
13# 1. Building kernel with CONFIG_FIRMWARE_IN_KERNEL=y -- $(fw-shipped-y) should
14# include the firmware files to include, according to .config
15# 2. 'make modules_install', which will install firmware for modules, and
16# _also_ for the in-kernel drivers when CONFIG_FIRMWARE_IN_KERNEL=n
17# 3. 'make firmware_install', which installs all firmware, unconditionally.
18
19# For the former two cases we want $(fw-shipped-y) and $(fw-shipped-m) to be
20# accurate. In the latter case it doesn't matter -- it'll use $(fw-shipped-all).
21# But be aware that the config file might not be included at all.
22
23ifdef CONFIG_ACENIC_OMIT_TIGON_I
24acenic-objs := acenic/tg2.bin
25fw-shipped- += acenic/tg1.bin
26else
27acenic-objs := acenic/tg1.bin acenic/tg2.bin
28endif
29fw-shipped-$(CONFIG_3C359) += 3com/3C359.bin
30fw-shipped-$(CONFIG_ACENIC) += $(acenic-objs)
31fw-shipped-$(CONFIG_ADAPTEC_STARFIRE) += adaptec/starfire_rx.bin \
32                     adaptec/starfire_tx.bin
33fw-shipped-$(CONFIG_ATARI_DSP56K) += dsp56k/bootstrap.bin
34fw-shipped-$(CONFIG_ATM_AMBASSADOR) += atmsar11.fw
35fw-shipped-$(CONFIG_BNX2X) += bnx2x/bnx2x-e1-6.0.34.0.fw \
36                  bnx2x/bnx2x-e1h-6.0.34.0.fw \
37                  bnx2x/bnx2x-e2-6.0.34.0.fw
38fw-shipped-$(CONFIG_BNX2) += bnx2/bnx2-mips-09-6.0.17.fw \
39                 bnx2/bnx2-rv2p-09-6.0.17.fw \
40                 bnx2/bnx2-rv2p-09ax-6.0.17.fw \
41                 bnx2/bnx2-mips-06-6.0.15.fw \
42                 bnx2/bnx2-rv2p-06-6.0.15.fw
43fw-shipped-$(CONFIG_CASSINI) += sun/cassini.bin
44fw-shipped-$(CONFIG_COMPUTONE) += intelliport2.bin
45fw-shipped-$(CONFIG_CHELSIO_T3) += cxgb3/t3b_psram-1.1.0.bin \
46                   cxgb3/t3c_psram-1.1.0.bin \
47                   cxgb3/t3fw-7.10.0.bin \
48                   cxgb3/ael2005_opt_edc.bin \
49                   cxgb3/ael2005_twx_edc.bin \
50                   cxgb3/ael2020_twx_edc.bin
51fw-shipped-$(CONFIG_DRM_MGA) += matrox/g200_warp.fw matrox/g400_warp.fw
52fw-shipped-$(CONFIG_DRM_R128) += r128/r128_cce.bin
53fw-shipped-$(CONFIG_DRM_RADEON) += radeon/R100_cp.bin radeon/R200_cp.bin \
54                   radeon/R300_cp.bin radeon/R420_cp.bin \
55                   radeon/RS690_cp.bin radeon/RS600_cp.bin \
56                   radeon/R520_cp.bin \
57                   radeon/R600_pfp.bin radeon/R600_me.bin \
58                   radeon/RV610_pfp.bin radeon/RV610_me.bin \
59                   radeon/RV630_pfp.bin radeon/RV630_me.bin \
60                   radeon/RV620_pfp.bin radeon/RV620_me.bin \
61                   radeon/RV635_pfp.bin radeon/RV635_me.bin \
62                   radeon/RV670_pfp.bin radeon/RV670_me.bin \
63                   radeon/RS780_pfp.bin radeon/RS780_me.bin \
64                   radeon/RV770_pfp.bin radeon/RV770_me.bin \
65                   radeon/RV730_pfp.bin radeon/RV730_me.bin \
66                   radeon/RV710_pfp.bin radeon/RV710_me.bin
67fw-shipped-$(CONFIG_DVB_AV7110) += av7110/bootcode.bin
68fw-shipped-$(CONFIG_DVB_TTUSB_BUDGET) += ttusb-budget/dspbootcode.bin
69fw-shipped-$(CONFIG_E100) += e100/d101m_ucode.bin e100/d101s_ucode.bin \
70                 e100/d102e_ucode.bin
71fw-shipped-$(CONFIG_MYRI_SBUS) += myricom/lanai.bin
72fw-shipped-$(CONFIG_PCMCIA_PCNET) += cis/LA-PCM.cis cis/PCMLM28.cis \
73                     cis/DP83903.cis cis/NE2K.cis \
74                     cis/tamarack.cis cis/PE-200.cis \
75                     cis/PE520.cis
76fw-shipped-$(CONFIG_PCMCIA_3C589) += cis/3CXEM556.cis
77fw-shipped-$(CONFIG_PCMCIA_3C574) += cis/3CCFEM556.cis
78fw-shipped-$(CONFIG_SERIAL_8250_CS) += cis/MT5634ZLX.cis cis/RS-COM-2P.cis \
79                       cis/COMpad2.cis cis/COMpad4.cis \
80                       cis/SW_555_SER.cis cis/SW_7xx_SER.cis \
81                       cis/SW_8xx_SER.cis
82fw-shipped-$(CONFIG_PCMCIA_SMC91C92) += ositech/Xilinx7OD.bin
83fw-shipped-$(CONFIG_SCSI_ADVANSYS) += advansys/mcode.bin advansys/38C1600.bin \
84                      advansys/3550.bin advansys/38C0800.bin
85fw-shipped-$(CONFIG_SCSI_QLOGIC_1280) += qlogic/1040.bin qlogic/1280.bin \
86                     qlogic/12160.bin
87fw-shipped-$(CONFIG_SCSI_QLOGICPTI) += qlogic/isp1000.bin
88fw-shipped-$(CONFIG_INFINIBAND_QIB) += qlogic/sd7220.fw
89fw-shipped-$(CONFIG_SMCTR) += tr_smctr.bin
90fw-shipped-$(CONFIG_SND_KORG1212) += korg/k1212.dsp
91fw-shipped-$(CONFIG_SND_MAESTRO3) += ess/maestro3_assp_kernel.fw \
92                     ess/maestro3_assp_minisrc.fw
93fw-shipped-$(CONFIG_SND_SB16_CSP) += sb16/mulaw_main.csp sb16/alaw_main.csp \
94                     sb16/ima_adpcm_init.csp \
95                     sb16/ima_adpcm_playback.csp \
96                     sb16/ima_adpcm_capture.csp
97fw-shipped-$(CONFIG_SND_YMFPCI) += yamaha/ds1_ctrl.fw yamaha/ds1_dsp.fw \
98                   yamaha/ds1e_ctrl.fw
99fw-shipped-$(CONFIG_SND_WAVEFRONT) += yamaha/yss225_registers.bin
100fw-shipped-$(CONFIG_TEHUTI) += tehuti/bdx.bin
101fw-shipped-$(CONFIG_TIGON3) += tigon/tg3.bin tigon/tg3_tso.bin \
102                   tigon/tg3_tso5.bin
103fw-shipped-$(CONFIG_TYPHOON) += 3com/typhoon.bin
104fw-shipped-$(CONFIG_USB_DABUSB) += dabusb/firmware.fw dabusb/bitstream.bin
105fw-shipped-$(CONFIG_USB_EMI26) += emi26/loader.fw emi26/firmware.fw \
106                  emi26/bitstream.fw
107fw-shipped-$(CONFIG_USB_EMI62) += emi62/loader.fw emi62/bitstream.fw \
108                  emi62/spdif.fw emi62/midi.fw
109fw-shipped-$(CONFIG_USB_KAWETH) += kaweth/new_code.bin kaweth/trigger_code.bin \
110                   kaweth/new_code_fix.bin \
111                   kaweth/trigger_code_fix.bin
112ifdef CONFIG_FIRMWARE_IN_KERNEL
113fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_MPR) += keyspan/mpr.fw
114fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA18X) += keyspan/usa18x.fw
115fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19) += keyspan/usa19.fw
116fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19QI) += keyspan/usa19qi.fw
117fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19QW) += keyspan/usa19qw.fw
118fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19W) += keyspan/usa19w.fw
119fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28) += keyspan/usa28.fw
120fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28XA) += keyspan/usa28xa.fw
121fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28XB) += keyspan/usa28xb.fw
122fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28X) += keyspan/usa28x.fw
123fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49W) += keyspan/usa49w.fw
124fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49WLC) += keyspan/usa49wlc.fw
125else
126fw-shipped- += keyspan/mpr.fw keyspan/usa18x.fw keyspan/usa19.fw \
127    keyspan/usa19qi.fw keyspan/usa19qw.fw keyspan/usa19w.fw \
128    keyspan/usa28.fw keyspan/usa28xa.fw keyspan/usa28xb.fw \
129    keyspan/usa28x.fw keyspan/usa49w.fw keyspan/usa49wlc.fw
130endif
131fw-shipped-$(CONFIG_USB_SERIAL_TI) += ti_3410.fw ti_5052.fw \
132                      mts_cdma.fw mts_gsm.fw mts_edge.fw
133fw-shipped-$(CONFIG_USB_SERIAL_EDGEPORT) += edgeport/boot.fw edgeport/boot2.fw \
134                        edgeport/down.fw edgeport/down2.fw
135fw-shipped-$(CONFIG_USB_SERIAL_EDGEPORT_TI) += edgeport/down3.bin
136fw-shipped-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat_loader.fw whiteheat.fw \
137                       # whiteheat_loader_debug.fw
138fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_PDA) += keyspan_pda/keyspan_pda.fw
139fw-shipped-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda/xircom_pgs.fw
140fw-shipped-$(CONFIG_USB_VICAM) += vicam/firmware.fw
141fw-shipped-$(CONFIG_VIDEO_CPIA2) += cpia2/stv0672_vp4.bin
142fw-shipped-$(CONFIG_YAM) += yam/1200.bin yam/9600.bin
143
144fw-shipped-all := $(fw-shipped-y) $(fw-shipped-m) $(fw-shipped-)
145
146# Directories which we _might_ need to create, so we have a rule for them.
147firmware-dirs := $(sort $(addprefix $(objtree)/$(obj)/,$(dir $(fw-external-y) $(fw-shipped-all))))
148
149quiet_cmd_mkdir = MKDIR $(patsubst $(objtree)/%,%,$@)
150      cmd_mkdir = mkdir -p $@
151
152quiet_cmd_ihex = IHEX $@
153      cmd_ihex = $(OBJCOPY) -Iihex -Obinary $< $@
154
155quiet_cmd_ihex2fw = IHEX2FW $@
156      cmd_ihex2fw = $(objtree)/$(obj)/ihex2fw $< $@
157
158quiet_cmd_h16tofw = H16TOFW $@
159      cmd_h16tofw = $(objtree)/$(obj)/ihex2fw -w $< $@
160
161quiet_cmd_fwbin = MK_FW $@
162      cmd_fwbin = FWNAME="$(patsubst firmware/%.gen.S,%,$@)"; \
163          FWSTR="$(subst /,_,$(subst .,_,$(subst -,_,$(patsubst \
164                firmware/%.gen.S,%,$@))))"; \
165          ASM_WORD=$(if $(CONFIG_64BIT),.quad,.long); \
166          ASM_ALIGN=$(if $(CONFIG_64BIT),3,2); \
167          PROGBITS=$(if $(CONFIG_ARM),%,@)progbits; \
168          echo "/* Generated by firmware/Makefile */" > $@;\
169          echo " .section .rodata" >>$@;\
170          echo " .p2align $${ASM_ALIGN}" >>$@;\
171          echo "_fw_$${FWSTR}_bin:" >>$@;\
172          echo " .incbin \"$(2)\"" >>$@;\
173          echo "_fw_end:" >>$@;\
174          echo " .section .rodata.str,\"aMS\",$${PROGBITS},1" >>$@;\
175          echo " .p2align $${ASM_ALIGN}" >>$@;\
176          echo "_fw_$${FWSTR}_name:" >>$@;\
177          echo " .string \"$$FWNAME\"" >>$@;\
178          echo " .section .builtin_fw,\"a\",$${PROGBITS}" >>$@;\
179          echo " .p2align $${ASM_ALIGN}" >>$@;\
180          echo " $${ASM_WORD} _fw_$${FWSTR}_name" >>$@;\
181          echo " $${ASM_WORD} _fw_$${FWSTR}_bin" >>$@;\
182          echo " $${ASM_WORD} _fw_end - _fw_$${FWSTR}_bin" >>$@;
183
184# One of these files will change, or come into existence, whenever
185# the configuration changes between 32-bit and 64-bit. The .S files
186# need to change when that happens.
187wordsize_deps := $(wildcard include/config/64bit.h include/config/32bit.h \
188        include/config/ppc32.h include/config/ppc64.h \
189        include/config/superh32.h include/config/superh64.h \
190        include/config/x86_32.h include/config/x86_64.h)
191
192# Workaround for make < 3.81, where .SECONDEXPANSION doesn't work.
193# It'll end up depending on these targets, so make them a PHONY rule which
194# depends on _all_ the directories in $(firmware-dirs), and it'll work out OK.
195PHONY += $(objtree)/$$(%) $(objtree)/$(obj)/$$(%)
196$(objtree)/$$(%) $(objtree)/$(obj)/$$(%): $(firmware-dirs)
197    @true
198
199# For the $$(dir %) trick, where we need % to be expanded first.
200.SECONDEXPANSION:
201
202$(patsubst %,$(obj)/%.gen.S, $(fw-shipped-y)): %: $(wordsize_deps) \
203        | $(objtree)/$$(dir %)
204    $(call cmd,fwbin,$(patsubst %.gen.S,%,$@))
205$(patsubst %,$(obj)/%.gen.S, $(fw-external-y)): %: $(wordsize_deps) \
206        include/config/extra/firmware/dir.h | $(objtree)/$$(dir %)
207    $(call cmd,fwbin,$(fwabs)/$(patsubst $(obj)/%.gen.S,%,$@))
208
209# The .o files depend on the binaries directly; the .S files don't.
210$(patsubst %,$(obj)/%.gen.o, $(fw-shipped-y)): %.gen.o: %
211$(patsubst %,$(obj)/%.gen.o, $(fw-external-y)): $(obj)/%.gen.o: $(fwdir)/%
212
213# .ihex is used just as a simple way to hold binary files in a source tree
214# where binaries are frowned upon. They are directly converted with objcopy.
215$(obj)/%: $(obj)/%.ihex | $(objtree)/$(obj)/$$(dir %)
216    $(call cmd,ihex)
217
218# Don't depend on ihex2fw if we're installing and it already exists.
219# Putting it after | in the dependencies doesn't seem sufficient when
220# we're installing after a cross-compile, because ihex2fw has dependencies
221# on stuff like /usr/lib/gcc/ppc64-redhat-linux/4.3.0/include/stddef.h and
222# thus wants to be rebuilt. Which it can't be, if the prebuilt kernel tree
223# is exported read-only for someone to run 'make install'.
224ifeq ($(INSTALL):$(wildcard $(obj)/ihex2fw),install:$(obj)/ihex2fw)
225ihex2fw_dep :=
226else
227ihex2fw_dep := $(obj)/ihex2fw
228endif
229
230# .HEX is also Intel HEX, but where the offset and length in each record
231# is actually meaningful, because the firmware has to be loaded in a certain
232# order rather than as a single binary blob. Thus, we convert them into our
233# more compact binary representation of ihex records (<linux/ihex.h>)
234$(obj)/%.fw: $(obj)/%.HEX $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %)
235    $(call cmd,ihex2fw)
236
237# .H16 is our own modified form of Intel HEX, with 16-bit length for records.
238$(obj)/%.fw: $(obj)/%.H16 $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %)
239    $(call cmd,h16tofw)
240
241$(firmware-dirs):
242    $(call cmd,mkdir)
243
244obj-y += $(patsubst %,%.gen.o, $(fw-external-y))
245obj-$(CONFIG_FIRMWARE_IN_KERNEL) += $(patsubst %,%.gen.o, $(fw-shipped-y))
246
247# Remove .S files and binaries created from ihex
248# (during 'make clean' .config isn't included so they're all in $(fw-shipped-))
249targets := $(fw-shipped-) $(patsubst $(obj)/%,%, \
250                $(shell find $(obj) -name \*.gen.S 2>/dev/null))
251
252# Without this, built-in.o won't be created when it's empty, and the
253# final vmlinux link will fail.
254obj-n := dummy
255
256hostprogs-y := ihex2fw
257

Archive Download this file



interactive