Root/scripts/kconfig/lex.zconf.c_shipped

1
2#line 3 "scripts/kconfig/lex.zconf.c"
3
4#define YY_INT_ALIGNED short int
5
6/* A lexical scanner generated by flex */
7
8#define yy_create_buffer zconf_create_buffer
9#define yy_delete_buffer zconf_delete_buffer
10#define yy_flex_debug zconf_flex_debug
11#define yy_init_buffer zconf_init_buffer
12#define yy_flush_buffer zconf_flush_buffer
13#define yy_load_buffer_state zconf_load_buffer_state
14#define yy_switch_to_buffer zconf_switch_to_buffer
15#define yyin zconfin
16#define yyleng zconfleng
17#define yylex zconflex
18#define yylineno zconflineno
19#define yyout zconfout
20#define yyrestart zconfrestart
21#define yytext zconftext
22#define yywrap zconfwrap
23#define yyalloc zconfalloc
24#define yyrealloc zconfrealloc
25#define yyfree zconffree
26
27#define FLEX_SCANNER
28#define YY_FLEX_MAJOR_VERSION 2
29#define YY_FLEX_MINOR_VERSION 5
30#define YY_FLEX_SUBMINOR_VERSION 35
31#if YY_FLEX_SUBMINOR_VERSION > 0
32#define FLEX_BETA
33#endif
34
35/* First, we deal with platform-specific or compiler-specific issues. */
36
37/* begin standard C headers. */
38#include <stdio.h>
39#include <string.h>
40#include <errno.h>
41#include <stdlib.h>
42
43/* end standard C headers. */
44
45/* flex integer type definitions */
46
47#ifndef FLEXINT_H
48#define FLEXINT_H
49
50/* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */
51
52#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
53
54/* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
55 * if you want the limit (max/min) macros for int types.
56 */
57#ifndef __STDC_LIMIT_MACROS
58#define __STDC_LIMIT_MACROS 1
59#endif
60
61#include <inttypes.h>
62typedef int8_t flex_int8_t;
63typedef uint8_t flex_uint8_t;
64typedef int16_t flex_int16_t;
65typedef uint16_t flex_uint16_t;
66typedef int32_t flex_int32_t;
67typedef uint32_t flex_uint32_t;
68#else
69typedef signed char flex_int8_t;
70typedef short int flex_int16_t;
71typedef int flex_int32_t;
72typedef unsigned char flex_uint8_t;
73typedef unsigned short int flex_uint16_t;
74typedef unsigned int flex_uint32_t;
75
76/* Limits of integral types. */
77#ifndef INT8_MIN
78#define INT8_MIN (-128)
79#endif
80#ifndef INT16_MIN
81#define INT16_MIN (-32767-1)
82#endif
83#ifndef INT32_MIN
84#define INT32_MIN (-2147483647-1)
85#endif
86#ifndef INT8_MAX
87#define INT8_MAX (127)
88#endif
89#ifndef INT16_MAX
90#define INT16_MAX (32767)
91#endif
92#ifndef INT32_MAX
93#define INT32_MAX (2147483647)
94#endif
95#ifndef UINT8_MAX
96#define UINT8_MAX (255U)
97#endif
98#ifndef UINT16_MAX
99#define UINT16_MAX (65535U)
100#endif
101#ifndef UINT32_MAX
102#define UINT32_MAX (4294967295U)
103#endif
104
105#endif /* ! C99 */
106
107#endif /* ! FLEXINT_H */
108
109#ifdef __cplusplus
110
111/* The "const" storage-class-modifier is valid. */
112#define YY_USE_CONST
113
114#else /* ! __cplusplus */
115
116/* C99 requires __STDC__ to be defined as 1. */
117#if defined (__STDC__)
118
119#define YY_USE_CONST
120
121#endif /* defined (__STDC__) */
122#endif /* ! __cplusplus */
123
124#ifdef YY_USE_CONST
125#define yyconst const
126#else
127#define yyconst
128#endif
129
130/* Returned upon end-of-file. */
131#define YY_NULL 0
132
133/* Promotes a possibly negative, possibly signed char to an unsigned
134 * integer for use as an array index. If the signed char is negative,
135 * we want to instead treat it as an 8-bit unsigned char, hence the
136 * double cast.
137 */
138#define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c)
139
140/* Enter a start condition. This macro really ought to take a parameter,
141 * but we do it the disgusting crufty way forced on us by the ()-less
142 * definition of BEGIN.
143 */
144#define BEGIN (yy_start) = 1 + 2 *
145
146/* Translate the current start state into a value that can be later handed
147 * to BEGIN to return to the state. The YYSTATE alias is for lex
148 * compatibility.
149 */
150#define YY_START (((yy_start) - 1) / 2)
151#define YYSTATE YY_START
152
153/* Action number for EOF rule of a given start state. */
154#define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1)
155
156/* Special action meaning "start processing a new file". */
157#define YY_NEW_FILE zconfrestart(zconfin )
158
159#define YY_END_OF_BUFFER_CHAR 0
160
161/* Size of default input buffer. */
162#ifndef YY_BUF_SIZE
163#ifdef __ia64__
164/* On IA-64, the buffer size is 16k, not 8k.
165 * Moreover, YY_BUF_SIZE is 2*YY_READ_BUF_SIZE in the general case.
166 * Ditto for the __ia64__ case accordingly.
167 */
168#define YY_BUF_SIZE 32768
169#else
170#define YY_BUF_SIZE 16384
171#endif /* __ia64__ */
172#endif
173
174/* The state buf must be large enough to hold one state per character in the main buffer.
175 */
176#define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type))
177
178#ifndef YY_TYPEDEF_YY_BUFFER_STATE
179#define YY_TYPEDEF_YY_BUFFER_STATE
180typedef struct yy_buffer_state *YY_BUFFER_STATE;
181#endif
182
183extern int zconfleng;
184
185extern FILE *zconfin, *zconfout;
186
187#define EOB_ACT_CONTINUE_SCAN 0
188#define EOB_ACT_END_OF_FILE 1
189#define EOB_ACT_LAST_MATCH 2
190
191    #define YY_LESS_LINENO(n)
192    
193/* Return all but the first "n" matched characters back to the input stream. */
194#define yyless(n) \
195    do \
196        { \
197        /* Undo effects of setting up zconftext. */ \
198        int yyless_macro_arg = (n); \
199        YY_LESS_LINENO(yyless_macro_arg);\
200        *yy_cp = (yy_hold_char); \
201        YY_RESTORE_YY_MORE_OFFSET \
202        (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \
203        YY_DO_BEFORE_ACTION; /* set up zconftext again */ \
204        } \
205    while ( 0 )
206
207#define unput(c) yyunput( c, (yytext_ptr) )
208
209#ifndef YY_TYPEDEF_YY_SIZE_T
210#define YY_TYPEDEF_YY_SIZE_T
211typedef size_t yy_size_t;
212#endif
213
214#ifndef YY_STRUCT_YY_BUFFER_STATE
215#define YY_STRUCT_YY_BUFFER_STATE
216struct yy_buffer_state
217    {
218    FILE *yy_input_file;
219
220    char *yy_ch_buf; /* input buffer */
221    char *yy_buf_pos; /* current position in input buffer */
222
223    /* Size of input buffer in bytes, not including room for EOB
224     * characters.
225     */
226    yy_size_t yy_buf_size;
227
228    /* Number of characters read into yy_ch_buf, not including EOB
229     * characters.
230     */
231    int yy_n_chars;
232
233    /* Whether we "own" the buffer - i.e., we know we created it,
234     * and can realloc() it to grow it, and should free() it to
235     * delete it.
236     */
237    int yy_is_our_buffer;
238
239    /* Whether this is an "interactive" input source; if so, and
240     * if we're using stdio for input, then we want to use getc()
241     * instead of fread(), to make sure we stop fetching input after
242     * each newline.
243     */
244    int yy_is_interactive;
245
246    /* Whether we're considered to be at the beginning of a line.
247     * If so, '^' rules will be active on the next match, otherwise
248     * not.
249     */
250    int yy_at_bol;
251
252    int yy_bs_lineno; /**< The line count. */
253    int yy_bs_column; /**< The column count. */
254    
255    /* Whether to try to fill the input buffer when we reach the
256     * end of it.
257     */
258    int yy_fill_buffer;
259
260    int yy_buffer_status;
261
262#define YY_BUFFER_NEW 0
263#define YY_BUFFER_NORMAL 1
264    /* When an EOF's been seen but there's still some text to process
265     * then we mark the buffer as YY_EOF_PENDING, to indicate that we
266     * shouldn't try reading from the input source any more. We might
267     * still have a bunch of tokens to match, though, because of
268     * possible backing-up.
269     *
270     * When we actually see the EOF, we change the status to "new"
271     * (via zconfrestart()), so that the user can continue scanning by
272     * just pointing zconfin at a new input file.
273     */
274#define YY_BUFFER_EOF_PENDING 2
275
276    };
277#endif /* !YY_STRUCT_YY_BUFFER_STATE */
278
279/* Stack of input buffers. */
280static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */
281static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */
282static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */
283
284/* We provide macros for accessing buffer states in case in the
285 * future we want to put the buffer states in a more general
286 * "scanner state".
287 *
288 * Returns the top of the stack, or NULL.
289 */
290#define YY_CURRENT_BUFFER ( (yy_buffer_stack) \
291                          ? (yy_buffer_stack)[(yy_buffer_stack_top)] \
292                          : NULL)
293
294/* Same as previous macro, but useful when we know that the buffer stack is not
295 * NULL or when we need an lvalue. For internal use only.
296 */
297#define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)]
298
299/* yy_hold_char holds the character lost when zconftext is formed. */
300static char yy_hold_char;
301static int yy_n_chars; /* number of characters read into yy_ch_buf */
302int zconfleng;
303
304/* Points to current character in buffer. */
305static char *yy_c_buf_p = (char *) 0;
306static int yy_init = 0; /* whether we need to initialize */
307static int yy_start = 0; /* start state number */
308
309/* Flag which is used to allow zconfwrap()'s to do buffer switches
310 * instead of setting up a fresh zconfin. A bit of a hack ...
311 */
312static int yy_did_buffer_switch_on_eof;
313
314void zconfrestart (FILE *input_file );
315void zconf_switch_to_buffer (YY_BUFFER_STATE new_buffer );
316YY_BUFFER_STATE zconf_create_buffer (FILE *file,int size );
317void zconf_delete_buffer (YY_BUFFER_STATE b );
318void zconf_flush_buffer (YY_BUFFER_STATE b );
319void zconfpush_buffer_state (YY_BUFFER_STATE new_buffer );
320void zconfpop_buffer_state (void );
321
322static void zconfensure_buffer_stack (void );
323static void zconf_load_buffer_state (void );
324static void zconf_init_buffer (YY_BUFFER_STATE b,FILE *file );
325
326#define YY_FLUSH_BUFFER zconf_flush_buffer(YY_CURRENT_BUFFER )
327
328YY_BUFFER_STATE zconf_scan_buffer (char *base,yy_size_t size );
329YY_BUFFER_STATE zconf_scan_string (yyconst char *yy_str );
330YY_BUFFER_STATE zconf_scan_bytes (yyconst char *bytes,int len );
331
332void *zconfalloc (yy_size_t );
333void *zconfrealloc (void *,yy_size_t );
334void zconffree (void * );
335
336#define yy_new_buffer zconf_create_buffer
337
338#define yy_set_interactive(is_interactive) \
339    { \
340    if ( ! YY_CURRENT_BUFFER ){ \
341        zconfensure_buffer_stack (); \
342        YY_CURRENT_BUFFER_LVALUE = \
343            zconf_create_buffer(zconfin,YY_BUF_SIZE ); \
344    } \
345    YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \
346    }
347
348#define yy_set_bol(at_bol) \
349    { \
350    if ( ! YY_CURRENT_BUFFER ){\
351        zconfensure_buffer_stack (); \
352        YY_CURRENT_BUFFER_LVALUE = \
353            zconf_create_buffer(zconfin,YY_BUF_SIZE ); \
354    } \
355    YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \
356    }
357
358#define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol)
359
360/* Begin user sect3 */
361
362#define zconfwrap(n) 1
363#define YY_SKIP_YYWRAP
364
365typedef unsigned char YY_CHAR;
366
367FILE *zconfin = (FILE *) 0, *zconfout = (FILE *) 0;
368
369typedef int yy_state_type;
370
371extern int zconflineno;
372
373int zconflineno = 1;
374
375extern char *zconftext;
376#define yytext_ptr zconftext
377static yyconst flex_int16_t yy_nxt[][17] =
378    {
379    {
380        0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
381        0, 0, 0, 0, 0, 0, 0
382    },
383
384    {
385       11, 12, 13, 14, 12, 12, 15, 12, 12, 12,
386       12, 12, 12, 12, 12, 12, 12
387    },
388
389    {
390       11, 12, 13, 14, 12, 12, 15, 12, 12, 12,
391       12, 12, 12, 12, 12, 12, 12
392    },
393
394    {
395       11, 16, 16, 17, 16, 16, 16, 16, 16, 16,
396       16, 16, 16, 18, 16, 16, 16
397    },
398
399    {
400       11, 16, 16, 17, 16, 16, 16, 16, 16, 16,
401       16, 16, 16, 18, 16, 16, 16
402
403    },
404
405    {
406       11, 19, 20, 21, 19, 19, 19, 19, 19, 19,
407       19, 19, 19, 19, 19, 19, 19
408    },
409
410    {
411       11, 19, 20, 21, 19, 19, 19, 19, 19, 19,
412       19, 19, 19, 19, 19, 19, 19
413    },
414
415    {
416       11, 22, 22, 23, 22, 24, 22, 22, 24, 22,
417       22, 22, 22, 22, 22, 25, 22
418    },
419
420    {
421       11, 22, 22, 23, 22, 24, 22, 22, 24, 22,
422       22, 22, 22, 22, 22, 25, 22
423    },
424
425    {
426       11, 26, 26, 27, 28, 29, 30, 31, 29, 32,
427       33, 34, 35, 35, 36, 37, 38
428
429    },
430
431    {
432       11, 26, 26, 27, 28, 29, 30, 31, 29, 32,
433       33, 34, 35, 35, 36, 37, 38
434    },
435
436    {
437      -11, -11, -11, -11, -11, -11, -11, -11, -11, -11,
438      -11, -11, -11, -11, -11, -11, -11
439    },
440
441    {
442       11, -12, -12, -12, -12, -12, -12, -12, -12, -12,
443      -12, -12, -12, -12, -12, -12, -12
444    },
445
446    {
447       11, -13, 39, 40, -13, -13, 41, -13, -13, -13,
448      -13, -13, -13, -13, -13, -13, -13
449    },
450
451    {
452       11, -14, -14, -14, -14, -14, -14, -14, -14, -14,
453      -14, -14, -14, -14, -14, -14, -14
454
455    },
456
457    {
458       11, 42, 42, 43, 42, 42, 42, 42, 42, 42,
459       42, 42, 42, 42, 42, 42, 42
460    },
461
462    {
463       11, -16, -16, -16, -16, -16, -16, -16, -16, -16,
464      -16, -16, -16, -16, -16, -16, -16
465    },
466
467    {
468       11, -17, -17, -17, -17, -17, -17, -17, -17, -17,
469      -17, -17, -17, -17, -17, -17, -17
470    },
471
472    {
473       11, -18, -18, -18, -18, -18, -18, -18, -18, -18,
474      -18, -18, -18, 44, -18, -18, -18
475    },
476
477    {
478       11, 45, 45, -19, 45, 45, 45, 45, 45, 45,
479       45, 45, 45, 45, 45, 45, 45
480
481    },
482
483    {
484       11, -20, 46, 47, -20, -20, -20, -20, -20, -20,
485      -20, -20, -20, -20, -20, -20, -20
486    },
487
488    {
489       11, 48, -21, -21, 48, 48, 48, 48, 48, 48,
490       48, 48, 48, 48, 48, 48, 48
491    },
492
493    {
494       11, 49, 49, 50, 49, -22, 49, 49, -22, 49,
495       49, 49, 49, 49, 49, -22, 49
496    },
497
498    {
499       11, -23, -23, -23, -23, -23, -23, -23, -23, -23,
500      -23, -23, -23, -23, -23, -23, -23
501    },
502
503    {
504       11, -24, -24, -24, -24, -24, -24, -24, -24, -24,
505      -24, -24, -24, -24, -24, -24, -24
506
507    },
508
509    {
510       11, 51, 51, 52, 51, 51, 51, 51, 51, 51,
511       51, 51, 51, 51, 51, 51, 51
512    },
513
514    {
515       11, -26, -26, -26, -26, -26, -26, -26, -26, -26,
516      -26, -26, -26, -26, -26, -26, -26
517    },
518
519    {
520       11, -27, -27, -27, -27, -27, -27, -27, -27, -27,
521      -27, -27, -27, -27, -27, -27, -27
522    },
523
524    {
525       11, -28, -28, -28, -28, -28, -28, -28, -28, -28,
526      -28, -28, -28, -28, 53, -28, -28
527    },
528
529    {
530       11, -29, -29, -29, -29, -29, -29, -29, -29, -29,
531      -29, -29, -29, -29, -29, -29, -29
532
533    },
534
535    {
536       11, 54, 54, -30, 54, 54, 54, 54, 54, 54,
537       54, 54, 54, 54, 54, 54, 54
538    },
539
540    {
541       11, -31, -31, -31, -31, -31, -31, 55, -31, -31,
542      -31, -31, -31, -31, -31, -31, -31
543    },
544
545    {
546       11, -32, -32, -32, -32, -32, -32, -32, -32, -32,
547      -32, -32, -32, -32, -32, -32, -32
548    },
549
550    {
551       11, -33, -33, -33, -33, -33, -33, -33, -33, -33,
552      -33, -33, -33, -33, -33, -33, -33
553    },
554
555    {
556       11, -34, -34, -34, -34, -34, -34, -34, -34, -34,
557      -34, 56, 57, 57, -34, -34, -34
558
559    },
560
561    {
562       11, -35, -35, -35, -35, -35, -35, -35, -35, -35,
563      -35, 57, 57, 57, -35, -35, -35
564    },
565
566    {
567       11, -36, -36, -36, -36, -36, -36, -36, -36, -36,
568      -36, -36, -36, -36, -36, -36, -36
569    },
570
571    {
572       11, -37, -37, 58, -37, -37, -37, -37, -37, -37,
573      -37, -37, -37, -37, -37, -37, -37
574    },
575
576    {
577       11, -38, -38, -38, -38, -38, -38, -38, -38, -38,
578      -38, -38, -38, -38, -38, -38, 59
579    },
580
581    {
582       11, -39, 39, 40, -39, -39, 41, -39, -39, -39,
583      -39, -39, -39, -39, -39, -39, -39
584
585    },
586
587    {
588       11, -40, -40, -40, -40, -40, -40, -40, -40, -40,
589      -40, -40, -40, -40, -40, -40, -40
590    },
591
592    {
593       11, 42, 42, 43, 42, 42, 42, 42, 42, 42,
594       42, 42, 42, 42, 42, 42, 42
595    },
596
597    {
598       11, 42, 42, 43, 42, 42, 42, 42, 42, 42,
599       42, 42, 42, 42, 42, 42, 42
600    },
601
602    {
603       11, -43, -43, -43, -43, -43, -43, -43, -43, -43,
604      -43, -43, -43, -43, -43, -43, -43
605    },
606
607    {
608       11, -44, -44, -44, -44, -44, -44, -44, -44, -44,
609      -44, -44, -44, 44, -44, -44, -44
610
611    },
612
613    {
614       11, 45, 45, -45, 45, 45, 45, 45, 45, 45,
615       45, 45, 45, 45, 45, 45, 45
616    },
617
618    {
619       11, -46, 46, 47, -46, -46, -46, -46, -46, -46,
620      -46, -46, -46, -46, -46, -46, -46
621    },
622
623    {
624       11, 48, -47, -47, 48, 48, 48, 48, 48, 48,
625       48, 48, 48, 48, 48, 48, 48
626    },
627
628    {
629       11, -48, -48, -48, -48, -48, -48, -48, -48, -48,
630      -48, -48, -48, -48, -48, -48, -48
631    },
632
633    {
634       11, 49, 49, 50, 49, -49, 49, 49, -49, 49,
635       49, 49, 49, 49, 49, -49, 49
636
637    },
638
639    {
640       11, -50, -50, -50, -50, -50, -50, -50, -50, -50,
641      -50, -50, -50, -50, -50, -50, -50
642    },
643
644    {
645       11, -51, -51, 52, -51, -51, -51, -51, -51, -51,
646      -51, -51, -51, -51, -51, -51, -51
647    },
648
649    {
650       11, -52, -52, -52, -52, -52, -52, -52, -52, -52,
651      -52, -52, -52, -52, -52, -52, -52
652    },
653
654    {
655       11, -53, -53, -53, -53, -53, -53, -53, -53, -53,
656      -53, -53, -53, -53, -53, -53, -53
657    },
658
659    {
660       11, 54, 54, -54, 54, 54, 54, 54, 54, 54,
661       54, 54, 54, 54, 54, 54, 54
662
663    },
664
665    {
666       11, -55, -55, -55, -55, -55, -55, -55, -55, -55,
667      -55, -55, -55, -55, -55, -55, -55
668    },
669
670    {
671       11, -56, -56, -56, -56, -56, -56, -56, -56, -56,
672      -56, 60, 57, 57, -56, -56, -56
673    },
674
675    {
676       11, -57, -57, -57, -57, -57, -57, -57, -57, -57,
677      -57, 57, 57, 57, -57, -57, -57
678    },
679
680    {
681       11, -58, -58, -58, -58, -58, -58, -58, -58, -58,
682      -58, -58, -58, -58, -58, -58, -58
683    },
684
685    {
686       11, -59, -59, -59, -59, -59, -59, -59, -59, -59,
687      -59, -59, -59, -59, -59, -59, -59
688
689    },
690
691    {
692       11, -60, -60, -60, -60, -60, -60, -60, -60, -60,
693      -60, 57, 57, 57, -60, -60, -60
694    },
695
696    } ;
697
698static yy_state_type yy_get_previous_state (void );
699static yy_state_type yy_try_NUL_trans (yy_state_type current_state );
700static int yy_get_next_buffer (void );
701static void yy_fatal_error (yyconst char msg[] );
702
703/* Done after the current pattern has been matched and before the
704 * corresponding action - sets up zconftext.
705 */
706#define YY_DO_BEFORE_ACTION \
707    (yytext_ptr) = yy_bp; \
708    zconfleng = (size_t) (yy_cp - yy_bp); \
709    (yy_hold_char) = *yy_cp; \
710    *yy_cp = '\0'; \
711    (yy_c_buf_p) = yy_cp;
712
713#define YY_NUM_RULES 33
714#define YY_END_OF_BUFFER 34
715/* This struct is not used in this scanner,
716   but its presence is necessary. */
717struct yy_trans_info
718    {
719    flex_int32_t yy_verify;
720    flex_int32_t yy_nxt;
721    };
722static yyconst flex_int16_t yy_accept[61] =
723    { 0,
724        0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
725       34, 5, 4, 2, 3, 7, 8, 6, 32, 29,
726       31, 24, 28, 27, 26, 22, 17, 13, 16, 20,
727       22, 11, 12, 19, 19, 14, 22, 22, 4, 2,
728        3, 3, 1, 6, 32, 29, 31, 30, 24, 23,
729       26, 25, 15, 20, 9, 19, 19, 21, 10, 18
730    } ;
731
732static yyconst flex_int32_t yy_ec[256] =
733    { 0,
734        1, 1, 1, 1, 1, 1, 1, 1, 2, 3,
735        1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
736        1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
737        1, 2, 4, 5, 6, 1, 1, 7, 8, 9,
738       10, 1, 1, 1, 11, 12, 12, 13, 13, 13,
739       13, 13, 13, 13, 13, 13, 13, 1, 1, 1,
740       14, 1, 1, 1, 13, 13, 13, 13, 13, 13,
741       13, 13, 13, 13, 13, 13, 13, 13, 13, 13,
742       13, 13, 13, 13, 13, 13, 13, 13, 13, 13,
743        1, 15, 1, 1, 13, 1, 13, 13, 13, 13,
744
745       13, 13, 13, 13, 13, 13, 13, 13, 13, 13,
746       13, 13, 13, 13, 13, 13, 13, 13, 13, 13,
747       13, 13, 1, 16, 1, 1, 1, 1, 1, 1,
748        1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
749        1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
750        1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
751        1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
752        1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
753        1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
754        1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
755
756        1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
757        1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
758        1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
759        1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
760        1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
761        1, 1, 1, 1, 1
762    } ;
763
764extern int zconf_flex_debug;
765int zconf_flex_debug = 0;
766
767/* The intent behind this definition is that it'll catch
768 * any uses of REJECT which flex missed.
769 */
770#define REJECT reject_used_but_not_detected
771#define yymore() yymore_used_but_not_detected
772#define YY_MORE_ADJ 0
773#define YY_RESTORE_YY_MORE_OFFSET
774char *zconftext;
775#define YY_NO_INPUT 1
776
777/*
778 * Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>
779 * Released under the terms of the GNU GPL v2.0.
780 */
781
782#include <limits.h>
783#include <stdio.h>
784#include <stdlib.h>
785#include <string.h>
786#include <unistd.h>
787
788#define LKC_DIRECT_LINK
789#include "lkc.h"
790
791#define START_STRSIZE 16
792
793static struct {
794    struct file *file;
795    int lineno;
796} current_pos;
797
798static char *text;
799static int text_size, text_asize;
800
801struct buffer {
802        struct buffer *parent;
803        YY_BUFFER_STATE state;
804};
805
806struct buffer *current_buf;
807
808static int last_ts, first_ts;
809
810static void zconf_endhelp(void);
811static void zconf_endfile(void);
812
813static void new_string(void)
814{
815    text = malloc(START_STRSIZE);
816    text_asize = START_STRSIZE;
817    text_size = 0;
818    *text = 0;
819}
820
821static void append_string(const char *str, int size)
822{
823    int new_size = text_size + size + 1;
824    if (new_size > text_asize) {
825        new_size += START_STRSIZE - 1;
826        new_size &= -START_STRSIZE;
827        text = realloc(text, new_size);
828        text_asize = new_size;
829    }
830    memcpy(text + text_size, str, size);
831    text_size += size;
832    text[text_size] = 0;
833}
834
835static void alloc_string(const char *str, int size)
836{
837    text = malloc(size + 1);
838    memcpy(text, str, size);
839    text[size] = 0;
840}
841
842#define INITIAL 0
843#define COMMAND 1
844#define HELP 2
845#define STRING 3
846#define PARAM 4
847
848#ifndef YY_NO_UNISTD_H
849/* Special case for "unistd.h", since it is non-ANSI. We include it way
850 * down here because we want the user's section 1 to have been scanned first.
851 * The user has a chance to override it with an option.
852 */
853#include <unistd.h>
854#endif
855
856#ifndef YY_EXTRA_TYPE
857#define YY_EXTRA_TYPE void *
858#endif
859
860static int yy_init_globals (void );
861
862/* Accessor methods to globals.
863   These are made visible to non-reentrant scanners for convenience. */
864
865int zconflex_destroy (void );
866
867int zconfget_debug (void );
868
869void zconfset_debug (int debug_flag );
870
871YY_EXTRA_TYPE zconfget_extra (void );
872
873void zconfset_extra (YY_EXTRA_TYPE user_defined );
874
875FILE *zconfget_in (void );
876
877void zconfset_in (FILE * in_str );
878
879FILE *zconfget_out (void );
880
881void zconfset_out (FILE * out_str );
882
883int zconfget_leng (void );
884
885char *zconfget_text (void );
886
887int zconfget_lineno (void );
888
889void zconfset_lineno (int line_number );
890
891/* Macros after this point can all be overridden by user definitions in
892 * section 1.
893 */
894
895#ifndef YY_SKIP_YYWRAP
896#ifdef __cplusplus
897extern "C" int zconfwrap (void );
898#else
899extern int zconfwrap (void );
900#endif
901#endif
902
903    static void yyunput (int c,char *buf_ptr );
904    
905#ifndef yytext_ptr
906static void yy_flex_strncpy (char *,yyconst char *,int );
907#endif
908
909#ifdef YY_NEED_STRLEN
910static int yy_flex_strlen (yyconst char * );
911#endif
912
913#ifndef YY_NO_INPUT
914
915#ifdef __cplusplus
916static int yyinput (void );
917#else
918static int input (void );
919#endif
920
921#endif
922
923/* Amount of stuff to slurp up with each read. */
924#ifndef YY_READ_BUF_SIZE
925#ifdef __ia64__
926/* On IA-64, the buffer size is 16k, not 8k */
927#define YY_READ_BUF_SIZE 16384
928#else
929#define YY_READ_BUF_SIZE 8192
930#endif /* __ia64__ */
931#endif
932
933/* Copy whatever the last rule matched to the standard output. */
934#ifndef ECHO
935/* This used to be an fputs(), but since the string might contain NUL's,
936 * we now use fwrite().
937 */
938#define ECHO do { if (fwrite( zconftext, zconfleng, 1, zconfout )) {} } while (0)
939#endif
940
941/* Gets input and stuffs it into "buf". number of characters read, or YY_NULL,
942 * is returned in "result".
943 */
944#ifndef YY_INPUT
945#define YY_INPUT(buf,result,max_size) \
946    errno=0; \
947    while ( (result = read( fileno(zconfin), (char *) buf, max_size )) < 0 ) \
948    { \
949        if( errno != EINTR) \
950        { \
951            YY_FATAL_ERROR( "input in flex scanner failed" ); \
952            break; \
953        } \
954        errno=0; \
955        clearerr(zconfin); \
956    }\
957\
958
959#endif
960
961/* No semi-colon after return; correct usage is to write "yyterminate();" -
962 * we don't want an extra ';' after the "return" because that will cause
963 * some compilers to complain about unreachable statements.
964 */
965#ifndef yyterminate
966#define yyterminate() return YY_NULL
967#endif
968
969/* Number of entries by which start-condition stack grows. */
970#ifndef YY_START_STACK_INCR
971#define YY_START_STACK_INCR 25
972#endif
973
974/* Report a fatal error. */
975#ifndef YY_FATAL_ERROR
976#define YY_FATAL_ERROR(msg) yy_fatal_error( msg )
977#endif
978
979/* end tables serialization structures and prototypes */
980
981/* Default declaration of generated scanner - a define so the user can
982 * easily add parameters.
983 */
984#ifndef YY_DECL
985#define YY_DECL_IS_OURS 1
986
987extern int zconflex (void);
988
989#define YY_DECL int zconflex (void)
990#endif /* !YY_DECL */
991
992/* Code executed at the beginning of each rule, after zconftext and zconfleng
993 * have been set up.
994 */
995#ifndef YY_USER_ACTION
996#define YY_USER_ACTION
997#endif
998
999/* Code executed at the end of each rule. */
1000#ifndef YY_BREAK
1001#define YY_BREAK break;
1002#endif
1003
1004#define YY_RULE_SETUP \
1005    YY_USER_ACTION
1006
1007/** The main scanner function which does all the work.
1008 */
1009YY_DECL
1010{
1011    register yy_state_type yy_current_state;
1012    register char *yy_cp, *yy_bp;
1013    register int yy_act;
1014    
1015    int str = 0;
1016    int ts, i;
1017
1018    if ( !(yy_init) )
1019        {
1020        (yy_init) = 1;
1021
1022#ifdef YY_USER_INIT
1023        YY_USER_INIT;
1024#endif
1025
1026        if ( ! (yy_start) )
1027            (yy_start) = 1; /* first start state */
1028
1029        if ( ! zconfin )
1030            zconfin = stdin;
1031
1032        if ( ! zconfout )
1033            zconfout = stdout;
1034
1035        if ( ! YY_CURRENT_BUFFER ) {
1036            zconfensure_buffer_stack ();
1037            YY_CURRENT_BUFFER_LVALUE =
1038                zconf_create_buffer(zconfin,YY_BUF_SIZE );
1039        }
1040
1041        zconf_load_buffer_state( );
1042        }
1043
1044    while ( 1 ) /* loops until end-of-file is reached */
1045        {
1046        yy_cp = (yy_c_buf_p);
1047
1048        /* Support of zconftext. */
1049        *yy_cp = (yy_hold_char);
1050
1051        /* yy_bp points to the position in yy_ch_buf of the start of
1052         * the current run.
1053         */
1054        yy_bp = yy_cp;
1055
1056        yy_current_state = (yy_start);
1057yy_match:
1058        while ( (yy_current_state = yy_nxt[yy_current_state][ yy_ec[YY_SC_TO_UI(*yy_cp)] ]) > 0 )
1059            ++yy_cp;
1060
1061        yy_current_state = -yy_current_state;
1062
1063yy_find_action:
1064        yy_act = yy_accept[yy_current_state];
1065
1066        YY_DO_BEFORE_ACTION;
1067
1068do_action: /* This label is used only to access EOF actions. */
1069
1070        switch ( yy_act )
1071    { /* beginning of action switch */
1072case 1:
1073/* rule 1 can match eol */
1074case 2:
1075/* rule 2 can match eol */
1076YY_RULE_SETUP
1077{
1078    current_file->lineno++;
1079    return T_EOL;
1080}
1081    YY_BREAK
1082case 3:
1083YY_RULE_SETUP
1084
1085    YY_BREAK
1086case 4:
1087YY_RULE_SETUP
1088{
1089    BEGIN(COMMAND);
1090}
1091    YY_BREAK
1092case 5:
1093YY_RULE_SETUP
1094{
1095    unput(zconftext[0]);
1096    BEGIN(COMMAND);
1097}
1098    YY_BREAK
1099
1100case 6:
1101YY_RULE_SETUP
1102{
1103        struct kconf_id *id = kconf_id_lookup(zconftext, zconfleng);
1104        BEGIN(PARAM);
1105        current_pos.file = current_file;
1106        current_pos.lineno = current_file->lineno;
1107        if (id && id->flags & TF_COMMAND) {
1108            zconflval.id = id;
1109            return id->token;
1110        }
1111        alloc_string(zconftext, zconfleng);
1112        zconflval.string = text;
1113        return T_WORD;
1114    }
1115    YY_BREAK
1116case 7:
1117YY_RULE_SETUP
1118
1119    YY_BREAK
1120case 8:
1121/* rule 8 can match eol */
1122YY_RULE_SETUP
1123{
1124        BEGIN(INITIAL);
1125        current_file->lineno++;
1126        return T_EOL;
1127    }
1128    YY_BREAK
1129
1130case 9:
1131YY_RULE_SETUP
1132return T_AND;
1133    YY_BREAK
1134case 10:
1135YY_RULE_SETUP
1136return T_OR;
1137    YY_BREAK
1138case 11:
1139YY_RULE_SETUP
1140return T_OPEN_PAREN;
1141    YY_BREAK
1142case 12:
1143YY_RULE_SETUP
1144return T_CLOSE_PAREN;
1145    YY_BREAK
1146case 13:
1147YY_RULE_SETUP
1148return T_NOT;
1149    YY_BREAK
1150case 14:
1151YY_RULE_SETUP
1152return T_EQUAL;
1153    YY_BREAK
1154case 15:
1155YY_RULE_SETUP
1156return T_UNEQUAL;
1157    YY_BREAK
1158case 16:
1159YY_RULE_SETUP
1160{
1161        str = zconftext[0];
1162        new_string();
1163        BEGIN(STRING);
1164    }
1165    YY_BREAK
1166case 17:
1167/* rule 17 can match eol */
1168YY_RULE_SETUP
1169BEGIN(INITIAL); current_file->lineno++; return T_EOL;
1170    YY_BREAK
1171case 18:
1172YY_RULE_SETUP
1173/* ignore */
1174    YY_BREAK
1175case 19:
1176YY_RULE_SETUP
1177{
1178        struct kconf_id *id = kconf_id_lookup(zconftext, zconfleng);
1179        if (id && id->flags & TF_PARAM) {
1180            zconflval.id = id;
1181            return id->token;
1182        }
1183        alloc_string(zconftext, zconfleng);
1184        zconflval.string = text;
1185        return T_WORD;
1186    }
1187    YY_BREAK
1188case 20:
1189YY_RULE_SETUP
1190/* comment */
1191    YY_BREAK
1192case 21:
1193/* rule 21 can match eol */
1194YY_RULE_SETUP
1195current_file->lineno++;
1196    YY_BREAK
1197case 22:
1198YY_RULE_SETUP
1199
1200    YY_BREAK
1201case YY_STATE_EOF(PARAM):
1202{
1203        BEGIN(INITIAL);
1204    }
1205    YY_BREAK
1206
1207case 23:
1208/* rule 23 can match eol */
1209*yy_cp = (yy_hold_char); /* undo effects of setting up zconftext */
1210(yy_c_buf_p) = yy_cp -= 1;
1211YY_DO_BEFORE_ACTION; /* set up zconftext again */
1212YY_RULE_SETUP
1213{
1214        append_string(zconftext, zconfleng);
1215        zconflval.string = text;
1216        return T_WORD_QUOTE;
1217    }
1218    YY_BREAK
1219case 24:
1220YY_RULE_SETUP
1221{
1222        append_string(zconftext, zconfleng);
1223    }
1224    YY_BREAK
1225case 25:
1226/* rule 25 can match eol */
1227*yy_cp = (yy_hold_char); /* undo effects of setting up zconftext */
1228(yy_c_buf_p) = yy_cp -= 1;
1229YY_DO_BEFORE_ACTION; /* set up zconftext again */
1230YY_RULE_SETUP
1231{
1232        append_string(zconftext + 1, zconfleng - 1);
1233        zconflval.string = text;
1234        return T_WORD_QUOTE;
1235    }
1236    YY_BREAK
1237case 26:
1238YY_RULE_SETUP
1239{
1240        append_string(zconftext + 1, zconfleng - 1);
1241    }
1242    YY_BREAK
1243case 27:
1244YY_RULE_SETUP
1245{
1246        if (str == zconftext[0]) {
1247            BEGIN(PARAM);
1248            zconflval.string = text;
1249            return T_WORD_QUOTE;
1250        } else
1251            append_string(zconftext, 1);
1252    }
1253    YY_BREAK
1254case 28:
1255/* rule 28 can match eol */
1256YY_RULE_SETUP
1257{
1258        printf("%s:%d:warning: multi-line strings not supported\n", zconf_curname(), zconf_lineno());
1259        current_file->lineno++;
1260        BEGIN(INITIAL);
1261        return T_EOL;
1262    }
1263    YY_BREAK
1264case YY_STATE_EOF(STRING):
1265{
1266        BEGIN(INITIAL);
1267    }
1268    YY_BREAK
1269
1270case 29:
1271YY_RULE_SETUP
1272{
1273        ts = 0;
1274        for (i = 0; i < zconfleng; i++) {
1275            if (zconftext[i] == '\t')
1276                ts = (ts & ~7) + 8;
1277            else
1278                ts++;
1279        }
1280        last_ts = ts;
1281        if (first_ts) {
1282            if (ts < first_ts) {
1283                zconf_endhelp();
1284                return T_HELPTEXT;
1285            }
1286            ts -= first_ts;
1287            while (ts > 8) {
1288                append_string(" ", 8);
1289                ts -= 8;
1290            }
1291            append_string(" ", ts);
1292        }
1293    }
1294    YY_BREAK
1295case 30:
1296/* rule 30 can match eol */
1297*yy_cp = (yy_hold_char); /* undo effects of setting up zconftext */
1298(yy_c_buf_p) = yy_cp -= 1;
1299YY_DO_BEFORE_ACTION; /* set up zconftext again */
1300YY_RULE_SETUP
1301{
1302        current_file->lineno++;
1303        zconf_endhelp();
1304        return T_HELPTEXT;
1305    }
1306    YY_BREAK
1307case 31:
1308/* rule 31 can match eol */
1309YY_RULE_SETUP
1310{
1311        current_file->lineno++;
1312        append_string("\n", 1);
1313    }
1314    YY_BREAK
1315case 32:
1316YY_RULE_SETUP
1317{
1318        while (zconfleng) {
1319            if ((zconftext[zconfleng-1] != ' ') && (zconftext[zconfleng-1] != '\t'))
1320                break;
1321            zconfleng--;
1322        }
1323        append_string(zconftext, zconfleng);
1324        if (!first_ts)
1325            first_ts = last_ts;
1326    }
1327    YY_BREAK
1328case YY_STATE_EOF(HELP):
1329{
1330        zconf_endhelp();
1331        return T_HELPTEXT;
1332    }
1333    YY_BREAK
1334
1335case YY_STATE_EOF(INITIAL):
1336case YY_STATE_EOF(COMMAND):
1337{
1338    if (current_file) {
1339        zconf_endfile();
1340        return T_EOL;
1341    }
1342    fclose(zconfin);
1343    yyterminate();
1344}
1345    YY_BREAK
1346case 33:
1347YY_RULE_SETUP
1348YY_FATAL_ERROR( "flex scanner jammed" );
1349    YY_BREAK
1350
1351    case YY_END_OF_BUFFER:
1352        {
1353        /* Amount of text matched not including the EOB char. */
1354        int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1;
1355
1356        /* Undo the effects of YY_DO_BEFORE_ACTION. */
1357        *yy_cp = (yy_hold_char);
1358        YY_RESTORE_YY_MORE_OFFSET
1359
1360        if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW )
1361            {
1362            /* We're scanning a new file or input source. It's
1363             * possible that this happened because the user
1364             * just pointed zconfin at a new source and called
1365             * zconflex(). If so, then we have to assure
1366             * consistency between YY_CURRENT_BUFFER and our
1367             * globals. Here is the right place to do so, because
1368             * this is the first action (other than possibly a
1369             * back-up) that will match for the new input source.
1370             */
1371            (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
1372            YY_CURRENT_BUFFER_LVALUE->yy_input_file = zconfin;
1373            YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL;
1374            }
1375
1376        /* Note that here we test for yy_c_buf_p "<=" to the position
1377         * of the first EOB in the buffer, since yy_c_buf_p will
1378         * already have been incremented past the NUL character
1379         * (since all states make transitions on EOB to the
1380         * end-of-buffer state). Contrast this with the test
1381         * in input().
1382         */
1383        if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
1384            { /* This was really a NUL. */
1385            yy_state_type yy_next_state;
1386
1387            (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text;
1388
1389            yy_current_state = yy_get_previous_state( );
1390
1391            /* Okay, we're now positioned to make the NUL
1392             * transition. We couldn't have
1393             * yy_get_previous_state() go ahead and do it
1394             * for us because it doesn't know how to deal
1395             * with the possibility of jamming (and we don't
1396             * want to build jamming into it because then it
1397             * will run more slowly).
1398             */
1399
1400            yy_next_state = yy_try_NUL_trans( yy_current_state );
1401
1402            yy_bp = (yytext_ptr) + YY_MORE_ADJ;
1403
1404            if ( yy_next_state )
1405                {
1406                /* Consume the NUL. */
1407                yy_cp = ++(yy_c_buf_p);
1408                yy_current_state = yy_next_state;
1409                goto yy_match;
1410                }
1411
1412            else
1413                {
1414                yy_cp = (yy_c_buf_p);
1415                goto yy_find_action;
1416                }
1417            }
1418
1419        else switch ( yy_get_next_buffer( ) )
1420            {
1421            case EOB_ACT_END_OF_FILE:
1422                {
1423                (yy_did_buffer_switch_on_eof) = 0;
1424
1425                if ( zconfwrap( ) )
1426                    {
1427                    /* Note: because we've taken care in
1428                     * yy_get_next_buffer() to have set up
1429                     * zconftext, we can now set up
1430                     * yy_c_buf_p so that if some total
1431                     * hoser (like flex itself) wants to
1432                     * call the scanner after we return the
1433                     * YY_NULL, it'll still work - another
1434                     * YY_NULL will get returned.
1435                     */
1436                    (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ;
1437
1438                    yy_act = YY_STATE_EOF(YY_START);
1439                    goto do_action;
1440                    }
1441
1442                else
1443                    {
1444                    if ( ! (yy_did_buffer_switch_on_eof) )
1445                        YY_NEW_FILE;
1446                    }
1447                break;
1448                }
1449
1450            case EOB_ACT_CONTINUE_SCAN:
1451                (yy_c_buf_p) =
1452                    (yytext_ptr) + yy_amount_of_matched_text;
1453
1454                yy_current_state = yy_get_previous_state( );
1455
1456                yy_cp = (yy_c_buf_p);
1457                yy_bp = (yytext_ptr) + YY_MORE_ADJ;
1458                goto yy_match;
1459
1460            case EOB_ACT_LAST_MATCH:
1461                (yy_c_buf_p) =
1462                &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)];
1463
1464                yy_current_state = yy_get_previous_state( );
1465
1466                yy_cp = (yy_c_buf_p);
1467                yy_bp = (yytext_ptr) + YY_MORE_ADJ;
1468                goto yy_find_action;
1469            }
1470        break;
1471        }
1472
1473    default:
1474        YY_FATAL_ERROR(
1475            "fatal flex scanner internal error--no action found" );
1476    } /* end of action switch */
1477        } /* end of scanning one token */
1478} /* end of zconflex */
1479
1480/* yy_get_next_buffer - try to read in a new buffer
1481 *
1482 * Returns a code representing an action:
1483 * EOB_ACT_LAST_MATCH -
1484 * EOB_ACT_CONTINUE_SCAN - continue scanning from current position
1485 * EOB_ACT_END_OF_FILE - end of file
1486 */
1487static int yy_get_next_buffer (void)
1488{
1489        register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf;
1490    register char *source = (yytext_ptr);
1491    register int number_to_move, i;
1492    int ret_val;
1493
1494    if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] )
1495        YY_FATAL_ERROR(
1496        "fatal flex scanner internal error--end of buffer missed" );
1497
1498    if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 )
1499        { /* Don't try to fill the buffer, so this is an EOF. */
1500        if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 )
1501            {
1502            /* We matched a single character, the EOB, so
1503             * treat this as a final EOF.
1504             */
1505            return EOB_ACT_END_OF_FILE;
1506            }
1507
1508        else
1509            {
1510            /* We matched some text prior to the EOB, first
1511             * process it.
1512             */
1513            return EOB_ACT_LAST_MATCH;
1514            }
1515        }
1516
1517    /* Try to read more data. */
1518
1519    /* First move last chars to start of buffer. */
1520    number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1;
1521
1522    for ( i = 0; i < number_to_move; ++i )
1523        *(dest++) = *(source++);
1524
1525    if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING )
1526        /* don't do the read, it's not guaranteed to return an EOF,
1527         * just force an EOF
1528         */
1529        YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0;
1530
1531    else
1532        {
1533            int num_to_read =
1534            YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1;
1535
1536        while ( num_to_read <= 0 )
1537            { /* Not enough room in the buffer - grow it. */
1538
1539            /* just a shorter name for the current buffer */
1540            YY_BUFFER_STATE b = YY_CURRENT_BUFFER;
1541
1542            int yy_c_buf_p_offset =
1543                (int) ((yy_c_buf_p) - b->yy_ch_buf);
1544
1545            if ( b->yy_is_our_buffer )
1546                {
1547                int new_size = b->yy_buf_size * 2;
1548
1549                if ( new_size <= 0 )
1550                    b->yy_buf_size += b->yy_buf_size / 8;
1551                else
1552                    b->yy_buf_size *= 2;
1553
1554                b->yy_ch_buf = (char *)
1555                    /* Include room in for 2 EOB chars. */
1556                    zconfrealloc((void *) b->yy_ch_buf,b->yy_buf_size + 2 );
1557                }
1558            else
1559                /* Can't grow it, we don't own it. */
1560                b->yy_ch_buf = 0;
1561
1562            if ( ! b->yy_ch_buf )
1563                YY_FATAL_ERROR(
1564                "fatal error - scanner input buffer overflow" );
1565
1566            (yy_c_buf_p) = &b->yy_ch_buf[yy_c_buf_p_offset];
1567
1568            num_to_read = YY_CURRENT_BUFFER_LVALUE->yy_buf_size -
1569                        number_to_move - 1;
1570
1571            }
1572
1573        if ( num_to_read > YY_READ_BUF_SIZE )
1574            num_to_read = YY_READ_BUF_SIZE;
1575
1576        /* Read in more data. */
1577        YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]),
1578            (yy_n_chars), (size_t) num_to_read );
1579
1580        YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
1581        }
1582
1583    if ( (yy_n_chars) == 0 )
1584        {
1585        if ( number_to_move == YY_MORE_ADJ )
1586            {
1587            ret_val = EOB_ACT_END_OF_FILE;
1588            zconfrestart(zconfin );
1589            }
1590
1591        else
1592            {
1593            ret_val = EOB_ACT_LAST_MATCH;
1594            YY_CURRENT_BUFFER_LVALUE->yy_buffer_status =
1595                YY_BUFFER_EOF_PENDING;
1596            }
1597        }
1598
1599    else
1600        ret_val = EOB_ACT_CONTINUE_SCAN;
1601
1602    if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) {
1603        /* Extend the array by 50%, plus the number we really need. */
1604        yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1);
1605        YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) zconfrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size );
1606        if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
1607            YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" );
1608    }
1609
1610    (yy_n_chars) += number_to_move;
1611    YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
1612    YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;
1613
1614    (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0];
1615
1616    return ret_val;
1617}
1618
1619/* yy_get_previous_state - get the state just before the EOB char was reached */
1620
1621    static yy_state_type yy_get_previous_state (void)
1622{
1623    register yy_state_type yy_current_state;
1624    register char *yy_cp;
1625    
1626    yy_current_state = (yy_start);
1627
1628    for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp )
1629        {
1630        yy_current_state = yy_nxt[yy_current_state][(*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1)];
1631        }
1632
1633    return yy_current_state;
1634}
1635
1636/* yy_try_NUL_trans - try to make a transition on the NUL character
1637 *
1638 * synopsis
1639 * next_state = yy_try_NUL_trans( current_state );
1640 */
1641    static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state )
1642{
1643    register int yy_is_jam;
1644    
1645    yy_current_state = yy_nxt[yy_current_state][1];
1646    yy_is_jam = (yy_current_state <= 0);
1647
1648    return yy_is_jam ? 0 : yy_current_state;
1649}
1650
1651    static void yyunput (int c, register char * yy_bp )
1652{
1653    register char *yy_cp;
1654    
1655    yy_cp = (yy_c_buf_p);
1656
1657    /* undo effects of setting up zconftext */
1658    *yy_cp = (yy_hold_char);
1659
1660    if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
1661        { /* need to shift things up to make room */
1662        /* +2 for EOB chars. */
1663        register int number_to_move = (yy_n_chars) + 2;
1664        register char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[
1665                    YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2];
1666        register char *source =
1667                &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move];
1668
1669        while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
1670            *--dest = *--source;
1671
1672        yy_cp += (int) (dest - source);
1673        yy_bp += (int) (dest - source);
1674        YY_CURRENT_BUFFER_LVALUE->yy_n_chars =
1675            (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_buf_size;
1676
1677        if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
1678            YY_FATAL_ERROR( "flex scanner push-back overflow" );
1679        }
1680
1681    *--yy_cp = (char) c;
1682
1683    (yytext_ptr) = yy_bp;
1684    (yy_hold_char) = *yy_cp;
1685    (yy_c_buf_p) = yy_cp;
1686}
1687
1688#ifndef YY_NO_INPUT
1689#ifdef __cplusplus
1690    static int yyinput (void)
1691#else
1692    static int input (void)
1693#endif
1694
1695{
1696    int c;
1697    
1698    *(yy_c_buf_p) = (yy_hold_char);
1699
1700    if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR )
1701        {
1702        /* yy_c_buf_p now points to the character we want to return.
1703         * If this occurs *before* the EOB characters, then it's a
1704         * valid NUL; if not, then we've hit the end of the buffer.
1705         */
1706        if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
1707            /* This was really a NUL. */
1708            *(yy_c_buf_p) = '\0';
1709
1710        else
1711            { /* need more input */
1712            int offset = (yy_c_buf_p) - (yytext_ptr);
1713            ++(yy_c_buf_p);
1714
1715            switch ( yy_get_next_buffer( ) )
1716                {
1717                case EOB_ACT_LAST_MATCH:
1718                    /* This happens because yy_g_n_b()
1719                     * sees that we've accumulated a
1720                     * token and flags that we need to
1721                     * try matching the token before
1722                     * proceeding. But for input(),
1723                     * there's no matching to consider.
1724                     * So convert the EOB_ACT_LAST_MATCH
1725                     * to EOB_ACT_END_OF_FILE.
1726                     */
1727
1728                    /* Reset buffer status. */
1729                    zconfrestart(zconfin );
1730
1731                    /*FALLTHROUGH*/
1732
1733                case EOB_ACT_END_OF_FILE:
1734                    {
1735                    if ( zconfwrap( ) )
1736                        return EOF;
1737
1738                    if ( ! (yy_did_buffer_switch_on_eof) )
1739                        YY_NEW_FILE;
1740#ifdef __cplusplus
1741                    return yyinput();
1742#else
1743                    return input();
1744#endif
1745                    }
1746
1747                case EOB_ACT_CONTINUE_SCAN:
1748                    (yy_c_buf_p) = (yytext_ptr) + offset;
1749                    break;
1750                }
1751            }
1752        }
1753
1754    c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */
1755    *(yy_c_buf_p) = '\0'; /* preserve zconftext */
1756    (yy_hold_char) = *++(yy_c_buf_p);
1757
1758    return c;
1759}
1760#endif /* ifndef YY_NO_INPUT */
1761
1762/** Immediately switch to a different input stream.
1763 * @param input_file A readable stream.
1764 *
1765 * @note This function does not reset the start condition to @c INITIAL .
1766 */
1767    void zconfrestart (FILE * input_file )
1768{
1769    
1770    if ( ! YY_CURRENT_BUFFER ){
1771        zconfensure_buffer_stack ();
1772        YY_CURRENT_BUFFER_LVALUE =
1773            zconf_create_buffer(zconfin,YY_BUF_SIZE );
1774    }
1775
1776    zconf_init_buffer(YY_CURRENT_BUFFER,input_file );
1777    zconf_load_buffer_state( );
1778}
1779
1780/** Switch to a different input buffer.
1781 * @param new_buffer The new input buffer.
1782 *
1783 */
1784    void zconf_switch_to_buffer (YY_BUFFER_STATE new_buffer )
1785{
1786    
1787    /* TODO. We should be able to replace this entire function body
1788     * with
1789     * zconfpop_buffer_state();
1790     * zconfpush_buffer_state(new_buffer);
1791     */
1792    zconfensure_buffer_stack ();
1793    if ( YY_CURRENT_BUFFER == new_buffer )
1794        return;
1795
1796    if ( YY_CURRENT_BUFFER )
1797        {
1798        /* Flush out information for old buffer. */
1799        *(yy_c_buf_p) = (yy_hold_char);
1800        YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
1801        YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
1802        }
1803
1804    YY_CURRENT_BUFFER_LVALUE = new_buffer;
1805    zconf_load_buffer_state( );
1806
1807    /* We don't actually know whether we did this switch during
1808     * EOF (zconfwrap()) processing, but the only time this flag
1809     * is looked at is after zconfwrap() is called, so it's safe
1810     * to go ahead and always set it.
1811     */
1812    (yy_did_buffer_switch_on_eof) = 1;
1813}
1814
1815static void zconf_load_buffer_state (void)
1816{
1817        (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
1818    (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos;
1819    zconfin = YY_CURRENT_BUFFER_LVALUE->yy_input_file;
1820    (yy_hold_char) = *(yy_c_buf_p);
1821}
1822
1823/** Allocate and initialize an input buffer state.
1824 * @param file A readable stream.
1825 * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE.
1826 *
1827 * @return the allocated buffer state.
1828 */
1829    YY_BUFFER_STATE zconf_create_buffer (FILE * file, int size )
1830{
1831    YY_BUFFER_STATE b;
1832    
1833    b = (YY_BUFFER_STATE) zconfalloc(sizeof( struct yy_buffer_state ) );
1834    if ( ! b )
1835        YY_FATAL_ERROR( "out of dynamic memory in zconf_create_buffer()" );
1836
1837    b->yy_buf_size = size;
1838
1839    /* yy_ch_buf has to be 2 characters longer than the size given because
1840     * we need to put in 2 end-of-buffer characters.
1841     */
1842    b->yy_ch_buf = (char *) zconfalloc(b->yy_buf_size + 2 );
1843    if ( ! b->yy_ch_buf )
1844        YY_FATAL_ERROR( "out of dynamic memory in zconf_create_buffer()" );
1845
1846    b->yy_is_our_buffer = 1;
1847
1848    zconf_init_buffer(b,file );
1849
1850    return b;
1851}
1852
1853/** Destroy the buffer.
1854 * @param b a buffer created with zconf_create_buffer()
1855 *
1856 */
1857    void zconf_delete_buffer (YY_BUFFER_STATE b )
1858{
1859    
1860    if ( ! b )
1861        return;
1862
1863    if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */
1864        YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0;
1865
1866    if ( b->yy_is_our_buffer )
1867        zconffree((void *) b->yy_ch_buf );
1868
1869    zconffree((void *) b );
1870}
1871
1872/* Initializes or reinitializes a buffer.
1873 * This function is sometimes called more than once on the same buffer,
1874 * such as during a zconfrestart() or at EOF.
1875 */
1876    static void zconf_init_buffer (YY_BUFFER_STATE b, FILE * file )
1877
1878{
1879    int oerrno = errno;
1880    
1881    zconf_flush_buffer(b );
1882
1883    b->yy_input_file = file;
1884    b->yy_fill_buffer = 1;
1885
1886    /* If b is the current buffer, then zconf_init_buffer was _probably_
1887     * called from zconfrestart() or through yy_get_next_buffer.
1888     * In that case, we don't want to reset the lineno or column.
1889     */
1890    if (b != YY_CURRENT_BUFFER){
1891        b->yy_bs_lineno = 1;
1892        b->yy_bs_column = 0;
1893    }
1894
1895        b->yy_is_interactive = 0;
1896    
1897    errno = oerrno;
1898}
1899
1900/** Discard all buffered characters. On the next scan, YY_INPUT will be called.
1901 * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER.
1902 *
1903 */
1904    void zconf_flush_buffer (YY_BUFFER_STATE b )
1905{
1906        if ( ! b )
1907        return;
1908
1909    b->yy_n_chars = 0;
1910
1911    /* We always need two end-of-buffer characters. The first causes
1912     * a transition to the end-of-buffer state. The second causes
1913     * a jam in that state.
1914     */
1915    b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR;
1916    b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR;
1917
1918    b->yy_buf_pos = &b->yy_ch_buf[0];
1919
1920    b->yy_at_bol = 1;
1921    b->yy_buffer_status = YY_BUFFER_NEW;
1922
1923    if ( b == YY_CURRENT_BUFFER )
1924        zconf_load_buffer_state( );
1925}
1926
1927/** Pushes the new state onto the stack. The new state becomes
1928 * the current state. This function will allocate the stack
1929 * if necessary.
1930 * @param new_buffer The new state.
1931 *
1932 */
1933void zconfpush_buffer_state (YY_BUFFER_STATE new_buffer )
1934{
1935        if (new_buffer == NULL)
1936        return;
1937
1938    zconfensure_buffer_stack();
1939
1940    /* This block is copied from zconf_switch_to_buffer. */
1941    if ( YY_CURRENT_BUFFER )
1942        {
1943        /* Flush out information for old buffer. */
1944        *(yy_c_buf_p) = (yy_hold_char);
1945        YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
1946        YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
1947        }
1948
1949    /* Only push if top exists. Otherwise, replace top. */
1950    if (YY_CURRENT_BUFFER)
1951        (yy_buffer_stack_top)++;
1952    YY_CURRENT_BUFFER_LVALUE = new_buffer;
1953
1954    /* copied from zconf_switch_to_buffer. */
1955    zconf_load_buffer_state( );
1956    (yy_did_buffer_switch_on_eof) = 1;
1957}
1958
1959/** Removes and deletes the top of the stack, if present.
1960 * The next element becomes the new top.
1961 *
1962 */
1963void zconfpop_buffer_state (void)
1964{
1965        if (!YY_CURRENT_BUFFER)
1966        return;
1967
1968    zconf_delete_buffer(YY_CURRENT_BUFFER );
1969    YY_CURRENT_BUFFER_LVALUE = NULL;
1970    if ((yy_buffer_stack_top) > 0)
1971        --(yy_buffer_stack_top);
1972
1973    if (YY_CURRENT_BUFFER) {
1974        zconf_load_buffer_state( );
1975        (yy_did_buffer_switch_on_eof) = 1;
1976    }
1977}
1978
1979/* Allocates the stack if it does not exist.
1980 * Guarantees space for at least one push.
1981 */
1982static void zconfensure_buffer_stack (void)
1983{
1984    int num_to_alloc;
1985    
1986    if (!(yy_buffer_stack)) {
1987
1988        /* First allocation is just for 2 elements, since we don't know if this
1989         * scanner will even need a stack. We use 2 instead of 1 to avoid an
1990         * immediate realloc on the next call.
1991         */
1992        num_to_alloc = 1;
1993        (yy_buffer_stack) = (struct yy_buffer_state**)zconfalloc
1994                                (num_to_alloc * sizeof(struct yy_buffer_state*)
1995                                );
1996        if ( ! (yy_buffer_stack) )
1997            YY_FATAL_ERROR( "out of dynamic memory in zconfensure_buffer_stack()" );
1998                                  
1999        memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
2000                
2001        (yy_buffer_stack_max) = num_to_alloc;
2002        (yy_buffer_stack_top) = 0;
2003        return;
2004    }
2005
2006    if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){
2007
2008        /* Increase the buffer to prepare for a possible push. */
2009        int grow_size = 8 /* arbitrary grow size */;
2010
2011        num_to_alloc = (yy_buffer_stack_max) + grow_size;
2012        (yy_buffer_stack) = (struct yy_buffer_state**)zconfrealloc
2013                                ((yy_buffer_stack),
2014                                num_to_alloc * sizeof(struct yy_buffer_state*)
2015                                );
2016        if ( ! (yy_buffer_stack) )
2017            YY_FATAL_ERROR( "out of dynamic memory in zconfensure_buffer_stack()" );
2018
2019        /* zero only the new slots.*/
2020        memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*));
2021        (yy_buffer_stack_max) = num_to_alloc;
2022    }
2023}
2024
2025/** Setup the input buffer state to scan directly from a user-specified character buffer.
2026 * @param base the character buffer
2027 * @param size the size in bytes of the character buffer
2028 *
2029 * @return the newly allocated buffer state object.
2030 */
2031YY_BUFFER_STATE zconf_scan_buffer (char * base, yy_size_t size )
2032{
2033    YY_BUFFER_STATE b;
2034    
2035    if ( size < 2 ||
2036         base[size-2] != YY_END_OF_BUFFER_CHAR ||
2037         base[size-1] != YY_END_OF_BUFFER_CHAR )
2038        /* They forgot to leave room for the EOB's. */
2039        return 0;
2040
2041    b = (YY_BUFFER_STATE) zconfalloc(sizeof( struct yy_buffer_state ) );
2042    if ( ! b )
2043        YY_FATAL_ERROR( "out of dynamic memory in zconf_scan_buffer()" );
2044
2045    b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */
2046    b->yy_buf_pos = b->yy_ch_buf = base;
2047    b->yy_is_our_buffer = 0;
2048    b->yy_input_file = 0;
2049    b->yy_n_chars = b->yy_buf_size;
2050    b->yy_is_interactive = 0;
2051    b->yy_at_bol = 1;
2052    b->yy_fill_buffer = 0;
2053    b->yy_buffer_status = YY_BUFFER_NEW;
2054
2055    zconf_switch_to_buffer(b );
2056
2057    return b;
2058}
2059
2060/** Setup the input buffer state to scan a string. The next call to zconflex() will
2061 * scan from a @e copy of @a str.
2062 * @param yystr a NUL-terminated string to scan
2063 *
2064 * @return the newly allocated buffer state object.
2065 * @note If you want to scan bytes that may contain NUL values, then use
2066 * zconf_scan_bytes() instead.
2067 */
2068YY_BUFFER_STATE zconf_scan_string (yyconst char * yystr )
2069{
2070    
2071    return zconf_scan_bytes(yystr,strlen(yystr) );
2072}
2073
2074/** Setup the input buffer state to scan the given bytes. The next call to zconflex() will
2075 * scan from a @e copy of @a bytes.
2076 * @param yybytes the byte buffer to scan
2077 * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes.
2078 *
2079 * @return the newly allocated buffer state object.
2080 */
2081YY_BUFFER_STATE zconf_scan_bytes (yyconst char * yybytes, int _yybytes_len )
2082{
2083    YY_BUFFER_STATE b;
2084    char *buf;
2085    yy_size_t n;
2086    int i;
2087    
2088    /* Get memory for full buffer, including space for trailing EOB's. */
2089    n = _yybytes_len + 2;
2090    buf = (char *) zconfalloc(n );
2091    if ( ! buf )
2092        YY_FATAL_ERROR( "out of dynamic memory in zconf_scan_bytes()" );
2093
2094    for ( i = 0; i < _yybytes_len; ++i )
2095        buf[i] = yybytes[i];
2096
2097    buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR;
2098
2099    b = zconf_scan_buffer(buf,n );
2100    if ( ! b )
2101        YY_FATAL_ERROR( "bad buffer in zconf_scan_bytes()" );
2102
2103    /* It's okay to grow etc. this buffer, and we should throw it
2104     * away when we're done.
2105     */
2106    b->yy_is_our_buffer = 1;
2107
2108    return b;
2109}
2110
2111#ifndef YY_EXIT_FAILURE
2112#define YY_EXIT_FAILURE 2
2113#endif
2114
2115static void yy_fatal_error (yyconst char* msg )
2116{
2117        (void) fprintf( stderr, "%s\n", msg );
2118    exit( YY_EXIT_FAILURE );
2119}
2120
2121/* Redefine yyless() so it works in section 3 code. */
2122
2123#undef yyless
2124#define yyless(n) \
2125    do \
2126        { \
2127        /* Undo effects of setting up zconftext. */ \
2128        int yyless_macro_arg = (n); \
2129        YY_LESS_LINENO(yyless_macro_arg);\
2130        zconftext[zconfleng] = (yy_hold_char); \
2131        (yy_c_buf_p) = zconftext + yyless_macro_arg; \
2132        (yy_hold_char) = *(yy_c_buf_p); \
2133        *(yy_c_buf_p) = '\0'; \
2134        zconfleng = yyless_macro_arg; \
2135        } \
2136    while ( 0 )
2137
2138/* Accessor methods (get/set functions) to struct members. */
2139
2140/** Get the current line number.
2141 *
2142 */
2143int zconfget_lineno (void)
2144{
2145        
2146    return zconflineno;
2147}
2148
2149/** Get the input stream.
2150 *
2151 */
2152FILE *zconfget_in (void)
2153{
2154        return zconfin;
2155}
2156
2157/** Get the output stream.
2158 *
2159 */
2160FILE *zconfget_out (void)
2161{
2162        return zconfout;
2163}
2164
2165/** Get the length of the current token.
2166 *
2167 */
2168int zconfget_leng (void)
2169{
2170        return zconfleng;
2171}
2172
2173/** Get the current token.
2174 *
2175 */
2176
2177char *zconfget_text (void)
2178{
2179        return zconftext;
2180}
2181
2182/** Set the current line number.
2183 * @param line_number
2184 *
2185 */
2186void zconfset_lineno (int line_number )
2187{
2188    
2189    zconflineno = line_number;
2190}
2191
2192/** Set the input stream. This does not discard the current
2193 * input buffer.
2194 * @param in_str A readable stream.
2195 *
2196 * @see zconf_switch_to_buffer
2197 */
2198void zconfset_in (FILE * in_str )
2199{
2200        zconfin = in_str ;
2201}
2202
2203void zconfset_out (FILE * out_str )
2204{
2205        zconfout = out_str ;
2206}
2207
2208int zconfget_debug (void)
2209{
2210        return zconf_flex_debug;
2211}
2212
2213void zconfset_debug (int bdebug )
2214{
2215        zconf_flex_debug = bdebug ;
2216}
2217
2218static int yy_init_globals (void)
2219{
2220        /* Initialization is the same as for the non-reentrant scanner.
2221     * This function is called from zconflex_destroy(), so don't allocate here.
2222     */
2223
2224    (yy_buffer_stack) = 0;
2225    (yy_buffer_stack_top) = 0;
2226    (yy_buffer_stack_max) = 0;
2227    (yy_c_buf_p) = (char *) 0;
2228    (yy_init) = 0;
2229    (yy_start) = 0;
2230
2231/* Defined in main.c */
2232#ifdef YY_STDINIT
2233    zconfin = stdin;
2234    zconfout = stdout;
2235#else
2236    zconfin = (FILE *) 0;
2237    zconfout = (FILE *) 0;
2238#endif
2239
2240    /* For future reference: Set errno on error, since we are called by
2241     * zconflex_init()
2242     */
2243    return 0;
2244}
2245
2246/* zconflex_destroy is for both reentrant and non-reentrant scanners. */
2247int zconflex_destroy (void)
2248{
2249    
2250    /* Pop the buffer stack, destroying each element. */
2251    while(YY_CURRENT_BUFFER){
2252        zconf_delete_buffer(YY_CURRENT_BUFFER );
2253        YY_CURRENT_BUFFER_LVALUE = NULL;
2254        zconfpop_buffer_state();
2255    }
2256
2257    /* Destroy the stack itself. */
2258    zconffree((yy_buffer_stack) );
2259    (yy_buffer_stack) = NULL;
2260
2261    /* Reset the globals. This is important in a non-reentrant scanner so the next time
2262     * zconflex() is called, initialization will occur. */
2263    yy_init_globals( );
2264
2265    return 0;
2266}
2267
2268/*
2269 * Internal utility routines.
2270 */
2271
2272#ifndef yytext_ptr
2273static void yy_flex_strncpy (char* s1, yyconst char * s2, int n )
2274{
2275    register int i;
2276    for ( i = 0; i < n; ++i )
2277        s1[i] = s2[i];
2278}
2279#endif
2280
2281#ifdef YY_NEED_STRLEN
2282static int yy_flex_strlen (yyconst char * s )
2283{
2284    register int n;
2285    for ( n = 0; s[n]; ++n )
2286        ;
2287
2288    return n;
2289}
2290#endif
2291
2292void *zconfalloc (yy_size_t size )
2293{
2294    return (void *) malloc( size );
2295}
2296
2297void *zconfrealloc (void * ptr, yy_size_t size )
2298{
2299    /* The cast to (char *) in the following accommodates both
2300     * implementations that use char* generic pointers, and those
2301     * that use void* generic pointers. It works with the latter
2302     * because both ANSI C and C++ allow castless assignment from
2303     * any pointer type to void*, and deal with argument conversions
2304     * as though doing an assignment.
2305     */
2306    return (void *) realloc( (char *) ptr, size );
2307}
2308
2309void zconffree (void * ptr )
2310{
2311    free( (char *) ptr ); /* see zconfrealloc() for (char *) cast */
2312}
2313
2314#define YYTABLES_NAME "yytables"
2315
2316void zconf_starthelp(void)
2317{
2318    new_string();
2319    last_ts = first_ts = 0;
2320    BEGIN(HELP);
2321}
2322
2323static void zconf_endhelp(void)
2324{
2325    zconflval.string = text;
2326    BEGIN(INITIAL);
2327}
2328
2329/*
2330 * Try to open specified file with following names:
2331 * ./name
2332 * $(srctree)/name
2333 * The latter is used when srctree is separate from objtree
2334 * when compiling the kernel.
2335 * Return NULL if file is not found.
2336 */
2337FILE *zconf_fopen(const char *name)
2338{
2339    char *env, fullname[PATH_MAX+1];
2340    FILE *f;
2341
2342    f = fopen(name, "r");
2343    if (!f && name != NULL && name[0] != '/') {
2344        env = getenv(SRCTREE);
2345        if (env) {
2346            sprintf(fullname, "%s/%s", env, name);
2347            f = fopen(fullname, "r");
2348        }
2349    }
2350    return f;
2351}
2352
2353void zconf_initscan(const char *name)
2354{
2355    zconfin = zconf_fopen(name);
2356    if (!zconfin) {
2357        printf("can't find file %s\n", name);
2358        exit(1);
2359    }
2360
2361    current_buf = malloc(sizeof(*current_buf));
2362    memset(current_buf, 0, sizeof(*current_buf));
2363
2364    current_file = file_lookup(name);
2365    current_file->lineno = 1;
2366}
2367
2368void zconf_nextfile(const char *name)
2369{
2370    struct file *iter;
2371    struct file *file = file_lookup(name);
2372    struct buffer *buf = malloc(sizeof(*buf));
2373    memset(buf, 0, sizeof(*buf));
2374
2375    current_buf->state = YY_CURRENT_BUFFER;
2376    zconfin = zconf_fopen(file->name);
2377    if (!zconfin) {
2378        printf("%s:%d: can't open file \"%s\"\n",
2379            zconf_curname(), zconf_lineno(), file->name);
2380        exit(1);
2381    }
2382    zconf_switch_to_buffer(zconf_create_buffer(zconfin,YY_BUF_SIZE));
2383    buf->parent = current_buf;
2384    current_buf = buf;
2385
2386    for (iter = current_file->parent; iter; iter = iter->parent ) {
2387        if (!strcmp(current_file->name,iter->name) ) {
2388            printf("%s:%d: recursive inclusion detected. "
2389                   "Inclusion path:\n current file : '%s'\n",
2390                   zconf_curname(), zconf_lineno(),
2391                   zconf_curname());
2392            iter = current_file->parent;
2393            while (iter && \
2394                   strcmp(iter->name,current_file->name)) {
2395                printf(" included from: '%s:%d'\n",
2396                       iter->name, iter->lineno-1);
2397                iter = iter->parent;
2398            }
2399            if (iter)
2400                printf(" included from: '%s:%d'\n",
2401                       iter->name, iter->lineno+1);
2402            exit(1);
2403        }
2404    }
2405    file->lineno = 1;
2406    file->parent = current_file;
2407    current_file = file;
2408}
2409
2410static void zconf_endfile(void)
2411{
2412    struct buffer *parent;
2413
2414    current_file = current_file->parent;
2415
2416    parent = current_buf->parent;
2417    if (parent) {
2418        fclose(zconfin);
2419        zconf_delete_buffer(YY_CURRENT_BUFFER);
2420        zconf_switch_to_buffer(parent->state);
2421    }
2422    free(current_buf);
2423    current_buf = parent;
2424}
2425
2426int zconf_lineno(void)
2427{
2428    return current_pos.lineno;
2429}
2430
2431const char *zconf_curname(void)
2432{
2433    return current_pos.file ? current_pos.file->name : "<none>";
2434}
2435
2436

Archive Download this file

Branches:
ben-wpan
ben-wpan-stefan
javiroman/ks7010
jz-2.6.34
jz-2.6.34-rc5
jz-2.6.34-rc6
jz-2.6.34-rc7
jz-2.6.35
jz-2.6.36
jz-2.6.37
jz-2.6.38
jz-2.6.39
jz-3.0
jz-3.1
jz-3.11
jz-3.12
jz-3.13
jz-3.15
jz-3.16
jz-3.18-dt
jz-3.2
jz-3.3
jz-3.4
jz-3.5
jz-3.6
jz-3.6-rc2-pwm
jz-3.9
jz-3.9-clk
jz-3.9-rc8
jz47xx
jz47xx-2.6.38
master

Tags:
od-2011-09-04
od-2011-09-18
v2.6.34-rc5
v2.6.34-rc6
v2.6.34-rc7
v3.9



interactive