Root/
1 | How to set up the Technisat/B2C2 Flexcop devices |
2 | ================================================ |
3 | |
4 | 1) Find out what device you have |
5 | ================================ |
6 | |
7 | Important Notice: The driver does NOT support Technisat USB 2 devices! |
8 | |
9 | First start your linux box with a shipped kernel: |
10 | lspci -vvv for a PCI device (lsusb -vvv for an USB device) will show you for example: |
11 | 02:0b.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / |
12 | Technisat SkyStar2 DVB card (rev 02) |
13 | |
14 | dmesg | grep frontend may show you for example: |
15 | DVB: registering frontend 0 (Conexant CX24123/CX24109)... |
16 | |
17 | 2) Kernel compilation: |
18 | ====================== |
19 | |
20 | If the Flexcop / Technisat is the only DVB / TV / Radio device in your box |
21 | get rid of unnecessary modules and check this one: |
22 | "Multimedia support" => "Customise analog and hybrid tuner modules to build" |
23 | In this directory uncheck every driver which is activated there |
24 | (except "Simple tuner support" for ATSC 3rd generation only -> see case 9 please). |
25 | |
26 | Then please activate: |
27 | 2a) Main module part: |
28 | "Multimedia support" => "DVB/ATSC adapters" |
29 | => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" |
30 | |
31 | a.) => "Technisat/B2C2 Air/Sky/Cable2PC PCI" (PCI card) or |
32 | b.) => "Technisat/B2C2 Air/Sky/Cable2PC USB" (USB 1.1 adapter) |
33 | and for troubleshooting purposes: |
34 | c.) => "Enable debug for the B2C2 FlexCop drivers" |
35 | |
36 | 2b) Frontend / Tuner / Demodulator module part: |
37 | "Multimedia support" => "DVB/ATSC adapters" |
38 | => "Customise the frontend modules to build" "Customise DVB frontends" => |
39 | |
40 | 1.) SkyStar DVB-S Revision 2.3: |
41 | a.) => "Zarlink VP310/MT312/ZL10313 based" |
42 | b.) => "Generic I2C PLL based tuners" |
43 | |
44 | 2.) SkyStar DVB-S Revision 2.6: |
45 | a.) => "ST STV0299 based" |
46 | b.) => "Generic I2C PLL based tuners" |
47 | |
48 | 3.) SkyStar DVB-S Revision 2.7: |
49 | a.) => "Samsung S5H1420 based" |
50 | b.) => "Integrant ITD1000 Zero IF tuner for DVB-S/DSS" |
51 | c.) => "ISL6421 SEC controller" |
52 | |
53 | 4.) SkyStar DVB-S Revision 2.8: |
54 | a.) => "Conexant CX24123 based" |
55 | b.) => "Conexant CX24113/CX24128 tuner for DVB-S/DSS" |
56 | c.) => "ISL6421 SEC controller" |
57 | |
58 | 5.) AirStar DVB-T card: |
59 | a.) => "Zarlink MT352 based" |
60 | b.) => "Generic I2C PLL based tuners" |
61 | |
62 | 6.) CableStar DVB-C card: |
63 | a.) => "ST STV0297 based" |
64 | b.) => "Generic I2C PLL based tuners" |
65 | |
66 | 7.) AirStar ATSC card 1st generation: |
67 | a.) => "Broadcom BCM3510" |
68 | |
69 | 8.) AirStar ATSC card 2nd generation: |
70 | a.) => "NxtWave Communications NXT2002/NXT2004 based" |
71 | b.) => "Generic I2C PLL based tuners" |
72 | |
73 | 9.) AirStar ATSC card 3rd generation: |
74 | a.) => "LG Electronics LGDT3302/LGDT3303 based" |
75 | b.) "Multimedia support" => "Customise analog and hybrid tuner modules to build" |
76 | => "Simple tuner support" |
77 | |
78 | Author: Uwe Bugla <uwe.bugla@gmx.de> August 2009 |
79 |
Branches:
ben-wpan
ben-wpan-stefan
javiroman/ks7010
jz-2.6.34
jz-2.6.34-rc5
jz-2.6.34-rc6
jz-2.6.34-rc7
jz-2.6.35
jz-2.6.36
jz-2.6.37
jz-2.6.38
jz-2.6.39
jz-3.0
jz-3.1
jz-3.11
jz-3.12
jz-3.13
jz-3.15
jz-3.16
jz-3.18-dt
jz-3.2
jz-3.3
jz-3.4
jz-3.5
jz-3.6
jz-3.6-rc2-pwm
jz-3.9
jz-3.9-clk
jz-3.9-rc8
jz47xx
jz47xx-2.6.38
master
Tags:
od-2011-09-04
od-2011-09-18
v2.6.34-rc5
v2.6.34-rc6
v2.6.34-rc7
v3.9