Root/
1 | #ifndef _SCSI_SCSI_DEVINFO_H |
2 | #define _SCSI_SCSI_DEVINFO_H |
3 | /* |
4 | * Flags for SCSI devices that need special treatment |
5 | */ |
6 | #define BLIST_NOLUN 0x001 /* Only scan LUN 0 */ |
7 | #define BLIST_FORCELUN 0x002 /* Known to have LUNs, force scanning, |
8 | deprecated: Use max_luns=N */ |
9 | #define BLIST_BORKEN 0x004 /* Flag for broken handshaking */ |
10 | #define BLIST_KEY 0x008 /* unlock by special command */ |
11 | #define BLIST_SINGLELUN 0x010 /* Do not use LUNs in parallel */ |
12 | #define BLIST_NOTQ 0x020 /* Buggy Tagged Command Queuing */ |
13 | #define BLIST_SPARSELUN 0x040 /* Non consecutive LUN numbering */ |
14 | #define BLIST_MAX5LUN 0x080 /* Avoid LUNS >= 5 */ |
15 | #define BLIST_ISROM 0x100 /* Treat as (removable) CD-ROM */ |
16 | #define BLIST_LARGELUN 0x200 /* LUNs past 7 on a SCSI-2 device */ |
17 | #define BLIST_INQUIRY_36 0x400 /* override additional length field */ |
18 | #define BLIST_INQUIRY_58 0x800 /* ... for broken inquiry responses */ |
19 | #define BLIST_NOSTARTONADD 0x1000 /* do not do automatic start on add */ |
20 | #define BLIST_MS_SKIP_PAGE_08 0x2000 /* do not send ms page 0x08 */ |
21 | #define BLIST_MS_SKIP_PAGE_3F 0x4000 /* do not send ms page 0x3f */ |
22 | #define BLIST_USE_10_BYTE_MS 0x8000 /* use 10 byte ms before 6 byte ms */ |
23 | #define BLIST_MS_192_BYTES_FOR_3F 0x10000 /* 192 byte ms page 0x3f request */ |
24 | #define BLIST_REPORTLUN2 0x20000 /* try REPORT_LUNS even for SCSI-2 devs |
25 | (if HBA supports more than 8 LUNs) */ |
26 | #define BLIST_NOREPORTLUN 0x40000 /* don't try REPORT_LUNS scan (SCSI-3 devs) */ |
27 | #define BLIST_NOT_LOCKABLE 0x80000 /* don't use PREVENT-ALLOW commands */ |
28 | #define BLIST_NO_ULD_ATTACH 0x100000 /* device is actually for RAID config */ |
29 | #define BLIST_SELECT_NO_ATN 0x200000 /* select without ATN */ |
30 | #define BLIST_RETRY_HWERROR 0x400000 /* retry HARDWARE_ERROR */ |
31 | #define BLIST_MAX_512 0x800000 /* maximum 512 sector cdb length */ |
32 | #define BLIST_ATTACH_PQ3 0x1000000 /* Scan: Attach to PQ3 devices */ |
33 | #define BLIST_NO_DIF 0x2000000 /* Disable T10 PI (DIF) */ |
34 | #define BLIST_SKIP_VPD_PAGES 0x4000000 /* Ignore SBC-3 VPD pages */ |
35 | #endif |
36 |
Branches:
ben-wpan
ben-wpan-stefan
javiroman/ks7010
jz-2.6.34
jz-2.6.34-rc5
jz-2.6.34-rc6
jz-2.6.34-rc7
jz-2.6.35
jz-2.6.36
jz-2.6.37
jz-2.6.38
jz-2.6.39
jz-3.0
jz-3.1
jz-3.11
jz-3.12
jz-3.13
jz-3.15
jz-3.16
jz-3.18-dt
jz-3.2
jz-3.3
jz-3.4
jz-3.5
jz-3.6
jz-3.6-rc2-pwm
jz-3.9
jz-3.9-clk
jz-3.9-rc8
jz47xx
jz47xx-2.6.38
master
Tags:
od-2011-09-04
od-2011-09-18
v2.6.34-rc5
v2.6.34-rc6
v2.6.34-rc7
v3.9