Root/
| 1 | # |
| 2 | # Makefile for the Linux kernel device drivers. |
| 3 | # |
| 4 | # 15 Sep 2000, Christoph Hellwig <hch@infradead.org> |
| 5 | # Rewritten to use lists instead of if-statements. |
| 6 | # |
| 7 | |
| 8 | # GPIO must come after pinctrl as gpios may need to mux pins etc |
| 9 | obj-y += pinctrl/ |
| 10 | obj-y += gpio/ |
| 11 | obj-y += pwm/ |
| 12 | obj-$(CONFIG_PCI) += pci/ |
| 13 | obj-$(CONFIG_PARISC) += parisc/ |
| 14 | obj-$(CONFIG_RAPIDIO) += rapidio/ |
| 15 | obj-y += video/ |
| 16 | obj-y += idle/ |
| 17 | obj-$(CONFIG_ACPI) += acpi/ |
| 18 | obj-$(CONFIG_SFI) += sfi/ |
| 19 | # PnP must come after ACPI since it will eventually need to check if acpi |
| 20 | # was used and do nothing if so |
| 21 | obj-$(CONFIG_PNP) += pnp/ |
| 22 | obj-y += amba/ |
| 23 | # Many drivers will want to use DMA so this has to be made available |
| 24 | # really early. |
| 25 | obj-$(CONFIG_DMA_ENGINE) += dma/ |
| 26 | |
| 27 | obj-$(CONFIG_VIRTIO) += virtio/ |
| 28 | obj-$(CONFIG_XEN) += xen/ |
| 29 | |
| 30 | # regulators early, since some subsystems rely on them to initialize |
| 31 | obj-$(CONFIG_REGULATOR) += regulator/ |
| 32 | |
| 33 | # tty/ comes before char/ so that the VT console is the boot-time |
| 34 | # default. |
| 35 | obj-y += tty/ |
| 36 | obj-y += char/ |
| 37 | |
| 38 | # gpu/ comes after char for AGP vs DRM startup |
| 39 | obj-y += gpu/ |
| 40 | |
| 41 | obj-$(CONFIG_CONNECTOR) += connector/ |
| 42 | |
| 43 | # i810fb and intelfb depend on char/agp/ |
| 44 | obj-$(CONFIG_FB_I810) += video/i810/ |
| 45 | obj-$(CONFIG_FB_INTEL) += video/intelfb/ |
| 46 | |
| 47 | obj-$(CONFIG_PARPORT) += parport/ |
| 48 | obj-y += base/ block/ misc/ mfd/ nfc/ |
| 49 | obj-$(CONFIG_NUBUS) += nubus/ |
| 50 | obj-y += macintosh/ |
| 51 | obj-$(CONFIG_IDE) += ide/ |
| 52 | obj-$(CONFIG_SCSI) += scsi/ |
| 53 | obj-$(CONFIG_ATA) += ata/ |
| 54 | obj-$(CONFIG_TARGET_CORE) += target/ |
| 55 | obj-$(CONFIG_MTD) += mtd/ |
| 56 | obj-$(CONFIG_SPI) += spi/ |
| 57 | obj-y += hsi/ |
| 58 | obj-y += net/ |
| 59 | obj-$(CONFIG_ATM) += atm/ |
| 60 | obj-$(CONFIG_FUSION) += message/ |
| 61 | obj-y += firewire/ |
| 62 | obj-$(CONFIG_UIO) += uio/ |
| 63 | obj-$(CONFIG_VFIO) += vfio/ |
| 64 | obj-y += cdrom/ |
| 65 | obj-y += auxdisplay/ |
| 66 | obj-$(CONFIG_PCCARD) += pcmcia/ |
| 67 | obj-$(CONFIG_DIO) += dio/ |
| 68 | obj-$(CONFIG_SBUS) += sbus/ |
| 69 | obj-$(CONFIG_ZORRO) += zorro/ |
| 70 | obj-$(CONFIG_MAC) += macintosh/ |
| 71 | obj-$(CONFIG_ATA_OVER_ETH) += block/aoe/ |
| 72 | obj-$(CONFIG_PARIDE) += block/paride/ |
| 73 | obj-$(CONFIG_TC) += tc/ |
| 74 | obj-$(CONFIG_UWB) += uwb/ |
| 75 | obj-$(CONFIG_USB_OTG_UTILS) += usb/ |
| 76 | obj-$(CONFIG_USB) += usb/ |
| 77 | obj-$(CONFIG_PCI) += usb/ |
| 78 | obj-$(CONFIG_USB_GADGET) += usb/ |
| 79 | obj-$(CONFIG_SERIO) += input/serio/ |
| 80 | obj-$(CONFIG_GAMEPORT) += input/gameport/ |
| 81 | obj-$(CONFIG_INPUT) += input/ |
| 82 | obj-$(CONFIG_I2O) += message/ |
| 83 | obj-$(CONFIG_RTC_LIB) += rtc/ |
| 84 | obj-y += i2c/ media/ |
| 85 | obj-$(CONFIG_PPS) += pps/ |
| 86 | obj-$(CONFIG_PTP_1588_CLOCK) += ptp/ |
| 87 | obj-$(CONFIG_W1) += w1/ |
| 88 | obj-$(CONFIG_POWER_SUPPLY) += power/ |
| 89 | obj-$(CONFIG_HWMON) += hwmon/ |
| 90 | obj-$(CONFIG_THERMAL) += thermal/ |
| 91 | obj-$(CONFIG_WATCHDOG) += watchdog/ |
| 92 | obj-$(CONFIG_MD) += md/ |
| 93 | obj-$(CONFIG_BT) += bluetooth/ |
| 94 | obj-$(CONFIG_ACCESSIBILITY) += accessibility/ |
| 95 | obj-$(CONFIG_ISDN) += isdn/ |
| 96 | obj-$(CONFIG_EDAC) += edac/ |
| 97 | obj-$(CONFIG_EISA) += eisa/ |
| 98 | obj-y += lguest/ |
| 99 | obj-$(CONFIG_CPU_FREQ) += cpufreq/ |
| 100 | obj-$(CONFIG_CPU_IDLE) += cpuidle/ |
| 101 | obj-y += mmc/ |
| 102 | obj-$(CONFIG_MEMSTICK) += memstick/ |
| 103 | obj-y += leds/ |
| 104 | obj-$(CONFIG_INFINIBAND) += infiniband/ |
| 105 | obj-$(CONFIG_SGI_SN) += sn/ |
| 106 | obj-y += firmware/ |
| 107 | obj-$(CONFIG_CRYPTO) += crypto/ |
| 108 | obj-$(CONFIG_SUPERH) += sh/ |
| 109 | obj-$(CONFIG_ARCH_SHMOBILE) += sh/ |
| 110 | ifndef CONFIG_ARCH_USES_GETTIMEOFFSET |
| 111 | obj-y += clocksource/ |
| 112 | endif |
| 113 | obj-$(CONFIG_DCA) += dca/ |
| 114 | obj-$(CONFIG_HID) += hid/ |
| 115 | obj-$(CONFIG_PPC_PS3) += ps3/ |
| 116 | obj-$(CONFIG_OF) += of/ |
| 117 | obj-$(CONFIG_SSB) += ssb/ |
| 118 | obj-$(CONFIG_BCMA) += bcma/ |
| 119 | obj-$(CONFIG_VHOST_NET) += vhost/ |
| 120 | obj-$(CONFIG_VLYNQ) += vlynq/ |
| 121 | obj-$(CONFIG_STAGING) += staging/ |
| 122 | obj-y += platform/ |
| 123 | obj-y += ieee802154/ |
| 124 | #common clk code |
| 125 | obj-y += clk/ |
| 126 | |
| 127 | obj-$(CONFIG_HWSPINLOCK) += hwspinlock/ |
| 128 | obj-$(CONFIG_NFC) += nfc/ |
| 129 | obj-$(CONFIG_IOMMU_SUPPORT) += iommu/ |
| 130 | obj-$(CONFIG_REMOTEPROC) += remoteproc/ |
| 131 | obj-$(CONFIG_RPMSG) += rpmsg/ |
| 132 | |
| 133 | # Virtualization drivers |
| 134 | obj-$(CONFIG_VIRT_DRIVERS) += virt/ |
| 135 | obj-$(CONFIG_HYPERV) += hv/ |
| 136 | |
| 137 | obj-$(CONFIG_PM_DEVFREQ) += devfreq/ |
| 138 | obj-$(CONFIG_EXTCON) += extcon/ |
| 139 | obj-$(CONFIG_MEMORY) += memory/ |
| 140 | obj-$(CONFIG_IIO) += iio/ |
| 141 | obj-$(CONFIG_VME_BUS) += vme/ |
| 142 |
Branches:
ben-wpan
ben-wpan-stefan
javiroman/ks7010
jz-2.6.34
jz-2.6.34-rc5
jz-2.6.34-rc6
jz-2.6.34-rc7
jz-2.6.35
jz-2.6.36
jz-2.6.37
jz-2.6.38
jz-2.6.39
jz-3.0
jz-3.1
jz-3.11
jz-3.12
jz-3.13
jz-3.15
jz-3.16
jz-3.18-dt
jz-3.2
jz-3.3
jz-3.4
jz-3.5
jz-3.6
jz-3.6-rc2-pwm
jz-3.9
jz-3.9-clk
jz-3.9-rc8
jz47xx
jz47xx-2.6.38
master
Tags:
od-2011-09-04
od-2011-09-18
v2.6.34-rc5
v2.6.34-rc6
v2.6.34-rc7
v3.9
