Root/
| 1 | /* |
| 2 | * Copyright (C) ST-Ericsson SA 2011 |
| 3 | * |
| 4 | * License Terms: GNU General Public License v2 |
| 5 | * Author: Mattias Wallin <mattias.wallin@stericsson.com> for ST-Ericsson |
| 6 | * Author: Sundar Iyer for ST-Ericsson |
| 7 | * sched_clock implementation is based on: |
| 8 | * plat-nomadik/timer.c Linus Walleij <linus.walleij@stericsson.com> |
| 9 | * |
| 10 | * DBx500-PRCMU Timer |
| 11 | * The PRCMU has 5 timers which are available in a always-on |
| 12 | * power domain. We use the Timer 4 for our always-on clock |
| 13 | * source on DB8500 and Timer 3 on DB5500. |
| 14 | */ |
| 15 | #include <linux/clockchips.h> |
| 16 | #include <linux/clksrc-dbx500-prcmu.h> |
| 17 | |
| 18 | #include <asm/sched_clock.h> |
| 19 | |
| 20 | #include <mach/setup.h> |
| 21 | #include <mach/hardware.h> |
| 22 | |
| 23 | #define RATE_32K 32768 |
| 24 | |
| 25 | #define TIMER_MODE_CONTINOUS 0x1 |
| 26 | #define TIMER_DOWNCOUNT_VAL 0xffffffff |
| 27 | |
| 28 | #define PRCMU_TIMER_REF 0 |
| 29 | #define PRCMU_TIMER_DOWNCOUNT 0x4 |
| 30 | #define PRCMU_TIMER_MODE 0x8 |
| 31 | |
| 32 | #define SCHED_CLOCK_MIN_WRAP 131072 /* 2^32 / 32768 */ |
| 33 | |
| 34 | static void __iomem *clksrc_dbx500_timer_base; |
| 35 | |
| 36 | static cycle_t clksrc_dbx500_prcmu_read(struct clocksource *cs) |
| 37 | { |
| 38 | u32 count, count2; |
| 39 | |
| 40 | do { |
| 41 | count = readl(clksrc_dbx500_timer_base + |
| 42 | PRCMU_TIMER_DOWNCOUNT); |
| 43 | count2 = readl(clksrc_dbx500_timer_base + |
| 44 | PRCMU_TIMER_DOWNCOUNT); |
| 45 | } while (count2 != count); |
| 46 | |
| 47 | /* Negate because the timer is a decrementing counter */ |
| 48 | return ~count; |
| 49 | } |
| 50 | |
| 51 | static struct clocksource clocksource_dbx500_prcmu = { |
| 52 | .name = "dbx500-prcmu-timer", |
| 53 | .rating = 300, |
| 54 | .read = clksrc_dbx500_prcmu_read, |
| 55 | .mask = CLOCKSOURCE_MASK(32), |
| 56 | .flags = CLOCK_SOURCE_IS_CONTINUOUS, |
| 57 | }; |
| 58 | |
| 59 | #ifdef CONFIG_CLKSRC_DBX500_PRCMU_SCHED_CLOCK |
| 60 | |
| 61 | static u32 notrace dbx500_prcmu_sched_clock_read(void) |
| 62 | { |
| 63 | if (unlikely(!clksrc_dbx500_timer_base)) |
| 64 | return 0; |
| 65 | |
| 66 | return clksrc_dbx500_prcmu_read(&clocksource_dbx500_prcmu); |
| 67 | } |
| 68 | |
| 69 | #endif |
| 70 | |
| 71 | void __init clksrc_dbx500_prcmu_init(void __iomem *base) |
| 72 | { |
| 73 | clksrc_dbx500_timer_base = base; |
| 74 | |
| 75 | /* |
| 76 | * The A9 sub system expects the timer to be configured as |
| 77 | * a continous looping timer. |
| 78 | * The PRCMU should configure it but if it for some reason |
| 79 | * don't we do it here. |
| 80 | */ |
| 81 | if (readl(clksrc_dbx500_timer_base + PRCMU_TIMER_MODE) != |
| 82 | TIMER_MODE_CONTINOUS) { |
| 83 | writel(TIMER_MODE_CONTINOUS, |
| 84 | clksrc_dbx500_timer_base + PRCMU_TIMER_MODE); |
| 85 | writel(TIMER_DOWNCOUNT_VAL, |
| 86 | clksrc_dbx500_timer_base + PRCMU_TIMER_REF); |
| 87 | } |
| 88 | #ifdef CONFIG_CLKSRC_DBX500_PRCMU_SCHED_CLOCK |
| 89 | setup_sched_clock(dbx500_prcmu_sched_clock_read, |
| 90 | 32, RATE_32K); |
| 91 | #endif |
| 92 | clocksource_register_hz(&clocksource_dbx500_prcmu, RATE_32K); |
| 93 | } |
| 94 |
Branches:
ben-wpan
ben-wpan-stefan
javiroman/ks7010
jz-2.6.34
jz-2.6.34-rc5
jz-2.6.34-rc6
jz-2.6.34-rc7
jz-2.6.35
jz-2.6.36
jz-2.6.37
jz-2.6.38
jz-2.6.39
jz-3.0
jz-3.1
jz-3.11
jz-3.12
jz-3.13
jz-3.15
jz-3.16
jz-3.18-dt
jz-3.2
jz-3.3
jz-3.4
jz-3.5
jz-3.6
jz-3.6-rc2-pwm
jz-3.9
jz-3.9-clk
jz-3.9-rc8
jz47xx
jz47xx-2.6.38
master
Tags:
od-2011-09-04
od-2011-09-18
v2.6.34-rc5
v2.6.34-rc6
v2.6.34-rc7
v3.9
