Root/
| 1 | /* |
| 2 | * Windfarm PowerMac thermal control |
| 3 | * |
| 4 | * Copyright 2012 Benjamin Herrenschmidt, IBM Corp. |
| 5 | * |
| 6 | * Released under the term of the GNU GPL v2. |
| 7 | */ |
| 8 | |
| 9 | #ifndef __WINDFARM_MPU_H |
| 10 | #define __WINDFARM_MPU_H |
| 11 | |
| 12 | typedef unsigned short fu16; |
| 13 | typedef int fs32; |
| 14 | typedef short fs16; |
| 15 | |
| 16 | /* Definition of the MPU data structure which contains per CPU |
| 17 | * calibration information (among others) for the G5 machines |
| 18 | */ |
| 19 | struct mpu_data |
| 20 | { |
| 21 | u8 signature; /* 0x00 - EEPROM sig. */ |
| 22 | u8 bytes_used; /* 0x01 - Bytes used in eeprom (160 ?) */ |
| 23 | u8 size; /* 0x02 - EEPROM size (256 ?) */ |
| 24 | u8 version; /* 0x03 - EEPROM version */ |
| 25 | u32 data_revision; /* 0x04 - Dataset revision */ |
| 26 | u8 processor_bin_code[3]; /* 0x08 - Processor BIN code */ |
| 27 | u8 bin_code_expansion; /* 0x0b - ??? (padding ?) */ |
| 28 | u8 processor_num; /* 0x0c - Number of CPUs on this MPU */ |
| 29 | u8 input_mul_bus_div; /* 0x0d - Clock input multiplier/bus divider */ |
| 30 | u8 reserved1[2]; /* 0x0e - */ |
| 31 | u32 input_clk_freq_high; /* 0x10 - Input clock frequency high */ |
| 32 | u8 cpu_nb_target_cycles; /* 0x14 - ??? */ |
| 33 | u8 cpu_statlat; /* 0x15 - ??? */ |
| 34 | u8 cpu_snooplat; /* 0x16 - ??? */ |
| 35 | u8 cpu_snoopacc; /* 0x17 - ??? */ |
| 36 | u8 nb_paamwin; /* 0x18 - ??? */ |
| 37 | u8 nb_statlat; /* 0x19 - ??? */ |
| 38 | u8 nb_snooplat; /* 0x1a - ??? */ |
| 39 | u8 nb_snoopwin; /* 0x1b - ??? */ |
| 40 | u8 api_bus_mode; /* 0x1c - ??? */ |
| 41 | u8 reserved2[3]; /* 0x1d - */ |
| 42 | u32 input_clk_freq_low; /* 0x20 - Input clock frequency low */ |
| 43 | u8 processor_card_slot; /* 0x24 - Processor card slot number */ |
| 44 | u8 reserved3[2]; /* 0x25 - */ |
| 45 | u8 padjmax; /* 0x27 - Max power adjustment (Not in OF!) */ |
| 46 | u8 ttarget; /* 0x28 - Target temperature */ |
| 47 | u8 tmax; /* 0x29 - Max temperature */ |
| 48 | u8 pmaxh; /* 0x2a - Max power */ |
| 49 | u8 tguardband; /* 0x2b - Guardband temp ??? Hist. len in OSX */ |
| 50 | fs32 pid_gp; /* 0x2c - PID proportional gain */ |
| 51 | fs32 pid_gr; /* 0x30 - PID reset gain */ |
| 52 | fs32 pid_gd; /* 0x34 - PID derivative gain */ |
| 53 | fu16 voph; /* 0x38 - Vop High */ |
| 54 | fu16 vopl; /* 0x3a - Vop Low */ |
| 55 | fs16 nactual_die; /* 0x3c - nActual Die */ |
| 56 | fs16 nactual_heatsink; /* 0x3e - nActual Heatsink */ |
| 57 | fs16 nactual_system; /* 0x40 - nActual System */ |
| 58 | u16 calibration_flags; /* 0x42 - Calibration flags */ |
| 59 | fu16 mdiode; /* 0x44 - Diode M value (scaling factor) */ |
| 60 | fs16 bdiode; /* 0x46 - Diode B value (offset) */ |
| 61 | fs32 theta_heat_sink; /* 0x48 - Theta heat sink */ |
| 62 | u16 rminn_intake_fan; /* 0x4c - Intake fan min RPM */ |
| 63 | u16 rmaxn_intake_fan; /* 0x4e - Intake fan max RPM */ |
| 64 | u16 rminn_exhaust_fan; /* 0x50 - Exhaust fan min RPM */ |
| 65 | u16 rmaxn_exhaust_fan; /* 0x52 - Exhaust fan max RPM */ |
| 66 | u8 processor_part_num[8]; /* 0x54 - Processor part number XX pumps min/max */ |
| 67 | u32 processor_lot_num; /* 0x5c - Processor lot number */ |
| 68 | u8 orig_card_sernum[0x10]; /* 0x60 - Card original serial number */ |
| 69 | u8 curr_card_sernum[0x10]; /* 0x70 - Card current serial number */ |
| 70 | u8 mlb_sernum[0x18]; /* 0x80 - MLB serial number */ |
| 71 | u32 checksum1; /* 0x98 - */ |
| 72 | u32 checksum2; /* 0x9c - */ |
| 73 | }; /* Total size = 0xa0 */ |
| 74 | |
| 75 | static inline const struct mpu_data *wf_get_mpu(int cpu) |
| 76 | { |
| 77 | struct device_node *np; |
| 78 | char nodename[64]; |
| 79 | const void *data; |
| 80 | int len; |
| 81 | |
| 82 | /* |
| 83 | * prom.c routine for finding a node by path is a bit brain dead |
| 84 | * and requires exact @xxx unit numbers. This is a bit ugly but |
| 85 | * will work for these machines |
| 86 | */ |
| 87 | sprintf(nodename, "/u3@0,f8000000/i2c@f8001000/cpuid@a%d", cpu ? 2 : 0); |
| 88 | np = of_find_node_by_path(nodename); |
| 89 | if (!np) |
| 90 | return NULL; |
| 91 | data = of_get_property(np, "cpuid", &len); |
| 92 | of_node_put(np); |
| 93 | if (!data) |
| 94 | return NULL; |
| 95 | |
| 96 | /* |
| 97 | * We are naughty, we have dropped the reference to the device |
| 98 | * node and still return a pointer to the content. We know we |
| 99 | * can do that though as this is only ever called on PowerMac |
| 100 | * which cannot remove those nodes |
| 101 | */ |
| 102 | return data; |
| 103 | } |
| 104 | |
| 105 | #endif /* __WINDFARM_MPU_H */ |
| 106 |
Branches:
ben-wpan
ben-wpan-stefan
javiroman/ks7010
jz-2.6.34
jz-2.6.34-rc5
jz-2.6.34-rc6
jz-2.6.34-rc7
jz-2.6.35
jz-2.6.36
jz-2.6.37
jz-2.6.38
jz-2.6.39
jz-3.0
jz-3.1
jz-3.11
jz-3.12
jz-3.13
jz-3.15
jz-3.16
jz-3.18-dt
jz-3.2
jz-3.3
jz-3.4
jz-3.5
jz-3.6
jz-3.6-rc2-pwm
jz-3.9
jz-3.9-clk
jz-3.9-rc8
jz47xx
jz47xx-2.6.38
master
Tags:
od-2011-09-04
od-2011-09-18
v2.6.34-rc5
v2.6.34-rc6
v2.6.34-rc7
v3.9
