Root/drivers/staging/line6/control.h

1/*
2 * Line6 Linux USB driver - 0.9.1beta
3 *
4 * Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
5 *
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License as
8 * published by the Free Software Foundation, version 2.
9 *
10 */
11
12#ifndef LINE6_CONTROL_H
13#define LINE6_CONTROL_H
14
15/**
16   List of PODxt Pro controls.
17   See Appendix C of the "PODxt (Pro) Pilot's Handbook" by Line6.
18   Comments after the number refer to the PODxt Pro firmware version required
19   for this feature.
20
21   Please *don't* reformat this file since "control.c" is created automatically
22   from "control.h", and this process depends on the exact formatting of the
23   code and the comments below!
24*/
25
26/* *INDENT-OFF* */
27
28enum {
29    POD_tweak = 1,
30    POD_wah_position = 4,
31    POD_compression_gain = 5, /* device: LINE6_BITS_PODXTALL */
32    POD_vol_pedal_position = 7,
33    POD_compression_threshold = 9,
34    POD_pan = 10,
35    POD_amp_model_setup = 11,
36    POD_amp_model = 12, /* firmware: 2.0 */
37    POD_drive = 13,
38    POD_bass = 14,
39    POD_mid = 15, /* device: LINE6_BITS_PODXTALL */
40    POD_lowmid = 15, /* device: LINE6_BITS_BASSPODXTALL */
41    POD_treble = 16, /* device: LINE6_BITS_PODXTALL */
42    POD_highmid = 16, /* device: LINE6_BITS_BASSPODXTALL */
43    POD_chan_vol = 17,
44    POD_reverb_mix = 18, /* device: LINE6_BITS_PODXTALL */
45    POD_effect_setup = 19,
46    POD_band_1_frequency = 20, /* firmware: 2.0 */
47    POD_presence = 21, /* device: LINE6_BITS_PODXTALL */
48    POD_treble__bass = 21, /* device: LINE6_BITS_BASSPODXTALL */
49    POD_noise_gate_enable = 22,
50    POD_gate_threshold = 23,
51    POD_gate_decay_time = 24,
52    POD_stomp_enable = 25,
53    POD_comp_enable = 26,
54    POD_stomp_time = 27,
55    POD_delay_enable = 28,
56    POD_mod_param_1 = 29,
57    POD_delay_param_1 = 30,
58    POD_delay_param_1_note_value = 31,
59    POD_band_2_frequency__bass = 32, /* device: LINE6_BITS_BASSPODXTALL */ /* firmware: 2.0 */
60    POD_delay_param_2 = 33,
61    POD_delay_volume_mix = 34,
62    POD_delay_param_3 = 35,
63    POD_reverb_enable = 36, /* device: LINE6_BITS_PODXTALL */
64    POD_reverb_type = 37, /* device: LINE6_BITS_PODXTALL */
65    POD_reverb_decay = 38, /* device: LINE6_BITS_PODXTALL */
66    POD_reverb_tone = 39, /* device: LINE6_BITS_PODXTALL */
67    POD_reverb_pre_delay = 40, /* device: LINE6_BITS_PODXTALL */
68    POD_reverb_pre_post = 41, /* device: LINE6_BITS_PODXTALL */
69    POD_band_2_frequency = 42, /* device: LINE6_BITS_PODXTALL */ /* firmware: 2.0 */
70    POD_band_3_frequency__bass = 42, /* device: LINE6_BITS_BASSPODXTALL */ /* firmware: 2.0 */
71    POD_wah_enable = 43,
72    POD_modulation_lo_cut = 44, /* device: LINE6_BITS_BASSPODXTALL */
73    POD_delay_reverb_lo_cut = 45, /* device: LINE6_BITS_BASSPODXTALL */
74    POD_volume_pedal_minimum = 46, /* device: LINE6_BITS_PODXTALL */ /* firmware: 2.0 */
75    POD_eq_pre_post = 46, /* device: LINE6_BITS_BASSPODXTALL */ /* firmware: 2.0 */
76    POD_volume_pre_post = 47,
77    POD_di_model = 48, /* device: LINE6_BITS_BASSPODXTALL */
78    POD_di_delay = 49, /* device: LINE6_BITS_BASSPODXTALL */
79    POD_mod_enable = 50,
80    POD_mod_param_1_note_value = 51,
81    POD_mod_param_2 = 52,
82    POD_mod_param_3 = 53,
83    POD_mod_param_4 = 54,
84    POD_mod_param_5 = 55, /* device: LINE6_BITS_BASSPODXTALL */
85    POD_mod_volume_mix = 56,
86    POD_mod_pre_post = 57,
87    POD_modulation_model = 58,
88    POD_band_3_frequency = 60, /* device: LINE6_BITS_PODXTALL */ /* firmware: 2.0 */
89    POD_band_4_frequency__bass = 60, /* device: LINE6_BITS_BASSPODXTALL */ /* firmware: 2.0 */
90    POD_mod_param_1_double_precision = 61,
91    POD_delay_param_1_double_precision = 62,
92    POD_eq_enable = 63, /* firmware: 2.0 */
93    POD_tap = 64,
94    POD_volume_tweak_pedal_assign = 65,
95    POD_band_5_frequency = 68, /* device: LINE6_BITS_BASSPODXTALL */ /* firmware: 2.0 */
96    POD_tuner = 69,
97    POD_mic_selection = 70,
98    POD_cabinet_model = 71,
99    POD_stomp_model = 75,
100    POD_roomlevel = 76,
101    POD_band_4_frequency = 77, /* device: LINE6_BITS_PODXTALL */ /* firmware: 2.0 */
102    POD_band_6_frequency = 77, /* device: LINE6_BITS_BASSPODXTALL */ /* firmware: 2.0 */
103    POD_stomp_param_1_note_value = 78,
104    POD_stomp_param_2 = 79,
105    POD_stomp_param_3 = 80,
106    POD_stomp_param_4 = 81,
107    POD_stomp_param_5 = 82,
108    POD_stomp_param_6 = 83,
109    POD_amp_switch_select = 84, /* device: LINE6_BITS_LIVE */
110    POD_delay_param_4 = 85,
111    POD_delay_param_5 = 86,
112    POD_delay_pre_post = 87,
113    POD_delay_model = 88, /* device: LINE6_BITS_PODXTALL */
114    POD_delay_verb_model = 88, /* device: LINE6_BITS_BASSPODXTALL */
115    POD_tempo_msb = 89,
116    POD_tempo_lsb = 90,
117    POD_wah_model = 91, /* firmware: 3.0 */
118    POD_bypass_volume = 105, /* firmware: 2.14 */
119    POD_fx_loop_on_off = 107, /* device: LINE6_BITS_PRO */
120    POD_tweak_param_select = 108,
121    POD_amp1_engage = 111,
122    POD_band_1_gain = 114, /* firmware: 2.0 */
123    POD_band_2_gain__bass = 115, /* device: LINE6_BITS_BASSPODXTALL */ /* firmware: 2.0 */
124    POD_band_2_gain = 116, /* device: LINE6_BITS_PODXTALL */ /* firmware: 2.0 */
125    POD_band_3_gain__bass = 116, /* device: LINE6_BITS_BASSPODXTALL */ /* firmware: 2.0 */
126    POD_band_3_gain = 117, /* device: LINE6_BITS_PODXTALL */ /* firmware: 2.0 */
127    POD_band_4_gain__bass = 117, /* device: LINE6_BITS_BASSPODXTALL */ /* firmware: 2.0 */
128    POD_band_5_gain__bass = 118, /* device: LINE6_BITS_BASSPODXTALL */ /* firmware: 2.0 */
129    POD_band_4_gain = 119, /* device: LINE6_BITS_PODXTALL */ /* firmware: 2.0 */
130    POD_band_6_gain__bass = 119 /* device: LINE6_BITS_BASSPODXTALL */ /* firmware: 2.0 */
131};
132
133/**
134   List of Variax workbench controls (dump).
135*/
136enum {
137    VARIAX_body = 3,
138    VARIAX_pickup1_enable = 4, /* 0: enabled, 1: disabled */
139    VARIAX_pickup1_type = 8,
140    VARIAX_pickup1_position = 9, /* type: 24 bit float */
141    VARIAX_pickup1_angle = 12, /* type: 24 bit float */
142    VARIAX_pickup1_level = 15, /* type: 24 bit float */
143    VARIAX_pickup2_enable = 18, /* 0: enabled, 1: disabled */
144    VARIAX_pickup2_type = 22,
145    VARIAX_pickup2_position = 23, /* type: 24 bit float */
146    VARIAX_pickup2_angle = 26, /* type: 24 bit float */
147    VARIAX_pickup2_level = 29, /* type: 24 bit float */
148    VARIAX_pickup_phase = 32, /* 0: in phase, 1: out of phase */
149    VARIAX_capacitance = 33, /* type: 24 bit float */
150    VARIAX_tone_resistance = 36, /* type: 24 bit float */
151    VARIAX_volume_resistance = 39, /* type: 24 bit float */
152    VARIAX_taper = 42, /* 0: Linear, 1: Audio */
153    VARIAX_tone_dump = 43, /* type: 24 bit float */
154    VARIAX_save_tone = 46,
155    VARIAX_volume_dump = 47, /* type: 24 bit float */
156    VARIAX_tuning_enable = 50,
157    VARIAX_tuning6 = 51,
158    VARIAX_tuning5 = 52,
159    VARIAX_tuning4 = 53,
160    VARIAX_tuning3 = 54,
161    VARIAX_tuning2 = 55,
162    VARIAX_tuning1 = 56,
163    VARIAX_detune6 = 57, /* type: 24 bit float */
164    VARIAX_detune5 = 60, /* type: 24 bit float */
165    VARIAX_detune4 = 63, /* type: 24 bit float */
166    VARIAX_detune3 = 66, /* type: 24 bit float */
167    VARIAX_detune2 = 69, /* type: 24 bit float */
168    VARIAX_detune1 = 72, /* type: 24 bit float */
169    VARIAX_mix6 = 75, /* type: 24 bit float */
170    VARIAX_mix5 = 78, /* type: 24 bit float */
171    VARIAX_mix4 = 81, /* type: 24 bit float */
172    VARIAX_mix3 = 84, /* type: 24 bit float */
173    VARIAX_mix2 = 87, /* type: 24 bit float */
174    VARIAX_mix1 = 90, /* type: 24 bit float */
175    VARIAX_pickup_wiring = 96 /* 0: parallel, 1: series */
176};
177
178/**
179   List of Variax workbench controls (MIDI).
180*/
181enum {
182    VARIAXMIDI_volume = 7,
183    VARIAXMIDI_tone = 79,
184};
185
186/* *INDENT-ON* */
187
188extern int line6_pod_create_files(int firmware, int type, struct device *dev);
189extern void line6_pod_remove_files(int firmware, int type, struct device *dev);
190extern int line6_variax_create_files(int firmware, int type,
191                     struct device *dev);
192extern void line6_variax_remove_files(int firmware, int type,
193                      struct device *dev);
194
195#endif
196

Archive Download this file



interactive