Root/drivers/staging/winbond/localpara.h

1#ifndef __WINBOND_LOCALPARA_H
2#define __WINBOND_LOCALPARA_H
3
4/*
5 * =============================================================
6 * LocalPara.h -
7 * =============================================================
8 */
9
10#include "mac_structures.h"
11
12/* Define the local ability */
13
14#define LOCAL_DEFAULT_BEACON_PERIOD 100 /* ms */
15#define LOCAL_DEFAULT_ATIM_WINDOW 0
16#define LOCAL_DEFAULT_ERP_CAPABILITY 0x0431 /*
17                         * 0x0001: ESS
18                         * 0x0010: Privacy
19                         * 0x0020: short preamble
20                         * 0x0400: short slot time
21                         */
22#define LOCAL_DEFAULT_LISTEN_INTERVAL 5
23
24#define LOCAL_DEFAULT_24_CHANNEL_NUM 13 /* channel 1..13 */
25#define LOCAL_DEFAULT_5_CHANNEL_NUM 8 /* channel 36..64 */
26
27#define LOCAL_USA_24_CHANNEL_NUM 11
28#define LOCAL_USA_5_CHANNEL_NUM 12
29#define LOCAL_EUROPE_24_CHANNEL_NUM 13
30#define LOCAL_EUROPE_5_CHANNEL_NUM 19
31#define LOCAL_JAPAN_24_CHANNEL_NUM 14
32#define LOCAL_JAPAN_5_CHANNEL_NUM 11
33#define LOCAL_UNKNOWN_24_CHANNEL_NUM 14
34#define LOCAL_UNKNOWN_5_CHANNEL_NUM 34 /* not include 165 */
35
36#define psLOCAL (&(adapter->sLocalPara))
37
38#define MODE_802_11_BG 0
39#define MODE_802_11_A 1
40#define MODE_802_11_ABG 2
41#define MODE_802_11_BG_IBSS 3
42#define MODE_802_11_B 4
43#define MODE_AUTO 255
44
45#define BAND_TYPE_DSSS 0
46#define BAND_TYPE_OFDM_24 1
47#define BAND_TYPE_OFDM_5 2
48
49/* refer Bitmap2RateValue table */
50
51/* the bitmap value of all the H/W supported rates: */
52/* 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54 */
53#define LOCAL_ALL_SUPPORTED_RATES_BITMAP 0x130c1a66
54/* the bitmap value of all the H/W supported rates except to non-OFDM rates: */
55/* 6, 9, 12, 18, 24, 36, 48, 54 */
56#define LOCAL_OFDM_SUPPORTED_RATES_BITMAP 0x130c1240
57#define LOCAL_11B_SUPPORTED_RATE_BITMAP 0x826
58#define LOCAL_11B_BASIC_RATE_BITMAP 0x826
59#define LOCAL_11B_OPERATION_RATE_BITMAP 0x826
60#define LOCAL_11G_BASIC_RATE_BITMAP 0x826 /* 1, 2, 5.5, 11 */
61#define LOCAL_11G_OPERATION_RATE_BITMAP 0x130c1240 /* 6, 9, 12, 18, 24, 36, 48, 54 */
62#define LOCAL_11A_BASIC_RATE_BITMAP 0x01001040 /* 6, 12, 24 */
63#define LOCAL_11A_OPERATION_RATE_BITMAP 0x120c0200 /* 9, 18, 36, 48, 54 */
64
65
66#define PWR_ACTIVE 0
67#define PWR_SAVE 1
68#define PWR_TX_IDLE_CYCLE 6
69
70/* bPreambleMode and bSlotTimeMode */
71#define AUTO_MODE 0
72#define LONG_MODE 1
73
74/* Region definition */
75#define REGION_AUTO 0xff
76#define REGION_UNKNOWN 0
77#define REGION_EUROPE 1 /* ETSI */
78#define REGION_JAPAN 2 /* MKK */
79#define REGION_USA 3 /* FCC */
80#define REGION_FRANCE 4 /* FRANCE */
81#define REGION_SPAIN 5 /* SPAIN */
82#define REGION_ISRAEL 6 /* ISRAEL */
83
84#define MAX_BSS_DESCRIPT_ELEMENT 32
85#define MAX_PMKID_CandidateList 16
86
87/*
88 * High byte : Event number, low byte : reason
89 * Event definition
90 * -- SME/MLME event
91 */
92#define EVENT_RCV_DEAUTH 0x0100
93#define EVENT_JOIN_FAIL 0x0200
94#define EVENT_AUTH_FAIL 0x0300
95#define EVENT_ASSOC_FAIL 0x0400
96#define EVENT_LOST_SIGNAL 0x0500
97#define EVENT_BSS_DESCRIPT_LACK 0x0600
98#define EVENT_COUNTERMEASURE 0x0700
99#define EVENT_JOIN_FILTER 0x0800
100/* -- TX/RX event */
101#define EVENT_RX_BUFF_UNAVAILABLE 0x4100
102
103#define EVENT_CONNECT 0x8100
104#define EVENT_DISCONNECT 0x8200
105#define EVENT_SCAN_REQ 0x8300
106
107/* Reason of Event */
108#define EVENT_REASON_FILTER_BASIC_RATE 0x0001
109#define EVENT_REASON_FILTER_PRIVACY 0x0002
110#define EVENT_REASON_FILTER_AUTH_MODE 0x0003
111#define EVENT_REASON_TIMEOUT 0x00ff
112
113/* Due to[E id][Length][OUI][Data] may be 257 bytes */
114#define MAX_IE_APPEND_SIZE (256 + 4)
115
116struct chan_info {
117    u8 band;
118    u8 ChanNo;
119};
120
121struct radio_off {
122    u8 boHwRadioOff;
123    u8 boSwRadioOff;
124};
125
126struct wb_local_para {
127    /* read from EPROM, manufacture set for each NetCard */
128    u8 PermanentAddress[MAC_ADDR_LENGTH + 2];
129    /* the driver will use this one actually. */
130    u8 ThisMacAddress[MAC_ADDR_LENGTH + 2];
131    u32 MTUsize; /* Ind to Uplayer, Max transmission unit size */
132    u8 region_INF; /* region setting from INF */
133    u8 region; /* real region setting of the device */
134    u8 Reserved_1[2];
135
136    /* power-save variables */
137    u8 iPowerSaveMode; /* 0 indicates on, 1 indicates off */
138    u8 ATIMmode;
139    u8 ExcludeUnencrypted;
140    /* Unit ime count for the decision to enter PS mode */
141    u16 CheckCountForPS;
142    u8 boHasTxActivity;/* tx activity has occurred */
143    u8 boMacPsValid; /* Power save mode obtained from H/W is valid or not */
144
145    /* Rate */
146    u8 TxRateMode; /*
147                 * Initial, input from Registry,
148                 * may be updated by GUI
149                 * Tx Rate Mode: auto(DTO on), max, 1M, 2M, ..
150                 */
151    u8 CurrentTxRate; /* The current Tx rate */
152    u8 CurrentTxRateForMng; /*
153                     * The current Tx rate for management
154                     * frames. It will be decided before
155                     * connection succeeds.
156                     */
157    u8 CurrentTxFallbackRate;
158
159    /* for Rate handler */
160    u8 BRateSet[32]; /* basic rate set */
161    u8 SRateSet[32]; /* support rate set */
162
163    u8 NumOfBRate;
164    u8 NumOfSRate;
165    u8 NumOfDsssRateInSRate; /* number of DSSS rates in supported rate set */
166    u8 reserved1;
167
168    u32 dwBasicRateBitmap; /* bit map of basic rates */
169
170    u32 dwSupportRateBitmap; /* bit map of all support rates including basic and operational rates */
171
172
173    /* For SME/MLME handler */
174
175    u16 wOldSTAindex; /* valid when boHandover=TRUE, store old connected STA index */
176    u16 wConnectedSTAindex; /* Index of peerly connected AP or IBSS in the descriptionset. */
177    u16 Association_ID; /* The Association ID in the (Re)Association Response frame. */
178    u16 ListenInterval; /* The listen interval when SME invoking MLME_ (Re)Associate_Request(). */
179
180    struct radio_off RadioOffStatus;
181    u8 Reserved0[2];
182    u8 boMsRadioOff; /* Ndis demands to be true when set Disassoc. OID and be false when set SSID OID. */
183    u8 bAntennaNo; /* which antenna */
184    u8 bConnectFlag; /* the connect status flag for roaming task */
185
186    u8 RoamStatus;
187    u8 reserved7[3];
188
189    struct chan_info CurrentChan; /* Current channel no. and channel band. It may be changed by scanning. */
190    u8 boHandover; /* Roaming, Hnadover to other AP. */
191    u8 boCCAbusy;
192
193    u16 CWMax; /* It may not be the real value that H/W used */
194    u8 CWMin; /* 255: set according to 802.11 spec. */
195    u8 reserved2;
196
197    /* 11G: */
198    u8 bMacOperationMode; /* operation in 802.11b or 802.11g */
199    u8 bSlotTimeMode; /* AUTO, s32 */
200    u8 bPreambleMode; /* AUTO, s32 */
201    u8 boNonERPpresent;
202
203    u8 boProtectMechanism; /* H/W will take the necessary action based on this variable */
204    u8 boShortPreamble; /* Same here */
205    u8 boShortSlotTime; /* Same here */
206    u8 reserved_3;
207
208    u32 RSN_IE_Bitmap;
209    u32 RSN_OUI_Type;
210
211    /* For the BSSID */
212    u8 HwBssid[MAC_ADDR_LENGTH + 2];
213    u32 HwBssidValid;
214
215    /* For scan list */
216    u8 BssListCount; /* Total count of valid descriptor indexes */
217    u8 boReceiveUncorrectInfo; /* important settings in beacon/probe resp. have been changed */
218    u8 NoOfJoinerInIbss;
219    u8 reserved_4;
220
221    /* Store the valid descriptor indexes obtained from scannings */
222    u8 BssListIndex[(MAX_BSS_DESCRIPT_ELEMENT + 3) & ~0x03];
223    /*
224     * Save the BssDescriptor index in this IBSS.
225     * The index 0 is local descriptor (psLOCAL->wConnectedSTAindex).
226     * If CONNECTED : NoOfJoinerInIbss >= 2
227     * else : NoOfJoinerInIbss <= 1
228     */
229    u8 JoinerInIbss[(MAX_BSS_DESCRIPT_ELEMENT + 3) & ~0x03];
230
231    /* General Statistics, count at Rx_handler or Tx_callback interrupt handler */
232    u64 GS_XMIT_OK; /* Good Frames Transmitted */
233    u64 GS_RCV_OK; /* Good Frames Received */
234    u32 GS_RCV_ERROR; /* Frames received with crc error */
235    u32 GS_XMIT_ERROR; /* Bad Frames Transmitted */
236    u32 GS_RCV_NO_BUFFER; /* Receive Buffer underrun */
237    u32 GS_XMIT_ONE_COLLISION; /* one collision */
238    u32 GS_XMIT_MORE_COLLISIONS;/* more collisions */
239
240    /*
241     * ================================================================
242     * Statistics (no matter whether it had done successfully) -wkchen
243     * ================================================================
244     */
245    u32 _NumRxMSDU;
246    u32 _NumTxMSDU;
247    u32 _dot11WEPExcludedCount;
248    u32 _dot11WEPUndecryptableCount;
249    u32 _dot11FrameDuplicateCount;
250
251    struct chan_info IbssChanSetting; /* 2B. Start IBSS Channel setting by registry or WWU. */
252    u8 reserved_5[2]; /* It may not be used after considering RF type, region and modulation type. */
253
254    u8 reserved_6[2]; /* two variables are for wep key error detection */
255    u32 bWepKeyError;
256    u32 bToSelfPacketReceived;
257    u32 WepKeyDetectTimerCount;
258
259    u16 SignalLostTh;
260    u16 SignalRoamTh;
261
262    u8 IE_Append_data[MAX_IE_APPEND_SIZE];
263    u16 IE_Append_size;
264    u16 reserved_7;
265};
266
267#endif
268

Archive Download this file



interactive