Root/
1 | |
2 | Video issues with S3 resume |
3 | ~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
4 | 2003-2006, Pavel Machek |
5 | |
6 | During S3 resume, hardware needs to be reinitialized. For most |
7 | devices, this is easy, and kernel driver knows how to do |
8 | it. Unfortunately there's one exception: video card. Those are usually |
9 | initialized by BIOS, and kernel does not have enough information to |
10 | boot video card. (Kernel usually does not even contain video card |
11 | driver -- vesafb and vgacon are widely used). |
12 | |
13 | This is not problem for swsusp, because during swsusp resume, BIOS is |
14 | run normally so video card is normally initialized. It should not be |
15 | problem for S1 standby, because hardware should retain its state over |
16 | that. |
17 | |
18 | We either have to run video BIOS during early resume, or interpret it |
19 | using vbetool later, or maybe nothing is necessary on particular |
20 | system because video state is preserved. Unfortunately different |
21 | methods work on different systems, and no known method suits all of |
22 | them. |
23 | |
24 | Userland application called s2ram has been developed; it contains long |
25 | whitelist of systems, and automatically selects working method for a |
26 | given system. It can be downloaded from CVS at |
27 | www.sf.net/projects/suspend . If you get a system that is not in the |
28 | whitelist, please try to find a working solution, and submit whitelist |
29 | entry so that work does not need to be repeated. |
30 | |
31 | Currently, VBE_SAVE method (6 below) works on most |
32 | systems. Unfortunately, vbetool only runs after userland is resumed, |
33 | so it makes debugging of early resume problems |
34 | hard/impossible. Methods that do not rely on userland are preferable. |
35 | |
36 | Details |
37 | ~~~~~~~ |
38 | |
39 | There are a few types of systems where video works after S3 resume: |
40 | |
41 | (1) systems where video state is preserved over S3. |
42 | |
43 | (2) systems where it is possible to call the video BIOS during S3 |
44 | resume. Unfortunately, it is not correct to call the video BIOS at |
45 | that point, but it happens to work on some machines. Use |
46 | acpi_sleep=s3_bios. |
47 | |
48 | (3) systems that initialize video card into vga text mode and where |
49 | the BIOS works well enough to be able to set video mode. Use |
50 | acpi_sleep=s3_mode on these. |
51 | |
52 | (4) on some systems s3_bios kicks video into text mode, and |
53 | acpi_sleep=s3_bios,s3_mode is needed. |
54 | |
55 | (5) radeon systems, where X can soft-boot your video card. You'll need |
56 | a new enough X, and a plain text console (no vesafb or radeonfb). See |
57 | http://www.doesi.gmxhome.de/linux/tm800s3/s3.html for more information. |
58 | Alternatively, you should use vbetool (6) instead. |
59 | |
60 | (6) other radeon systems, where vbetool is enough to bring system back |
61 | to life. It needs text console to be working. Do vbetool vbestate |
62 | save > /tmp/delme; echo 3 > /proc/acpi/sleep; vbetool post; vbetool |
63 | vbestate restore < /tmp/delme; setfont <whatever>, and your video |
64 | should work. |
65 | |
66 | (7) on some systems, it is possible to boot most of kernel, and then |
67 | POSTing bios works. Ole Rohne has patch to do just that at |
68 | http://dev.gentoo.org/~marineam/patch-radeonfb-2.6.11-rc2-mm2. |
69 | |
70 | (8) on some systems, you can use the video_post utility and or |
71 | do echo 3 > /sys/power/state && /usr/sbin/video_post - which will |
72 | initialize the display in console mode. If you are in X, you can switch |
73 | to a virtual terminal and back to X using CTRL+ALT+F1 - CTRL+ALT+F7 to get |
74 | the display working in graphical mode again. |
75 | |
76 | Now, if you pass acpi_sleep=something, and it does not work with your |
77 | bios, you'll get a hard crash during resume. Be careful. Also it is |
78 | safest to do your experiments with plain old VGA console. The vesafb |
79 | and radeonfb (etc) drivers have a tendency to crash the machine during |
80 | resume. |
81 | |
82 | You may have a system where none of above works. At that point you |
83 | either invent another ugly hack that works, or write proper driver for |
84 | your video card (good luck getting docs :-(). Maybe suspending from X |
85 | (proper X, knowing your hardware, not XF68_FBcon) might have better |
86 | chance of working. |
87 | |
88 | Table of known working notebooks: |
89 | |
90 | Model hack (or "how to do it") |
91 | ------------------------------------------------------------------------------ |
92 | Acer Aspire 1406LC ole's late BIOS init (7), turn off DRI |
93 | Acer TM 230 s3_bios (2) |
94 | Acer TM 242FX vbetool (6) |
95 | Acer TM C110 video_post (8) |
96 | Acer TM C300 vga=normal (only suspend on console, not in X), vbetool (6) or video_post (8) |
97 | Acer TM 4052LCi s3_bios (2) |
98 | Acer TM 636Lci s3_bios,s3_mode (4) |
99 | Acer TM 650 (Radeon M7) vga=normal plus boot-radeon (5) gets text console back |
100 | Acer TM 660 ??? (*) |
101 | Acer TM 800 vga=normal, X patches, see webpage (5) or vbetool (6) |
102 | Acer TM 803 vga=normal, X patches, see webpage (5) or vbetool (6) |
103 | Acer TM 803LCi vga=normal, vbetool (6) |
104 | Arima W730a vbetool needed (6) |
105 | Asus L2400D s3_mode (3)(***) (S1 also works OK) |
106 | Asus L3350M (SiS 740) (6) |
107 | Asus L3800C (Radeon M7) s3_bios (2) (S1 also works OK) |
108 | Asus M6887Ne vga=normal, s3_bios (2), use radeon driver instead of fglrx in x.org |
109 | Athlon64 desktop prototype s3_bios (2) |
110 | Compal CL-50 ??? (*) |
111 | Compaq Armada E500 - P3-700 none (1) (S1 also works OK) |
112 | Compaq Evo N620c vga=normal, s3_bios (2) |
113 | Dell 600m, ATI R250 Lf none (1), but needs xorg-x11-6.8.1.902-1 |
114 | Dell D600, ATI RV250 vga=normal and X, or try vbestate (6) |
115 | Dell D610 vga=normal and X (possibly vbestate (6) too, but not tested) |
116 | Dell Inspiron 4000 ??? (*) |
117 | Dell Inspiron 500m ??? (*) |
118 | Dell Inspiron 510m ??? |
119 | Dell Inspiron 5150 vbetool needed (6) |
120 | Dell Inspiron 600m ??? (*) |
121 | Dell Inspiron 8200 ??? (*) |
122 | Dell Inspiron 8500 ??? (*) |
123 | Dell Inspiron 8600 ??? (*) |
124 | eMachines athlon64 machines vbetool needed (6) (someone please get me model #s) |
125 | HP NC6000 s3_bios, may not use radeonfb (2); or vbetool (6) |
126 | HP NX7000 ??? (*) |
127 | HP Pavilion ZD7000 vbetool post needed, need open-source nv driver for X |
128 | HP Omnibook XE3 athlon version none (1) |
129 | HP Omnibook XE3GC none (1), video is S3 Savage/IX-MV |
130 | HP Omnibook XE3L-GF vbetool (6) |
131 | HP Omnibook 5150 none (1), (S1 also works OK) |
132 | IBM TP T20, model 2647-44G none (1), video is S3 Inc. 86C270-294 Savage/IX-MV, vesafb gets "interesting" but X work. |
133 | IBM TP A31 / Type 2652-M5G s3_mode (3) [works ok with BIOS 1.04 2002-08-23, but not at all with BIOS 1.11 2004-11-05 :-(] |
134 | IBM TP R32 / Type 2658-MMG none (1) |
135 | IBM TP R40 2722B3G ??? (*) |
136 | IBM TP R50p / Type 1832-22U s3_bios (2) |
137 | IBM TP R51 none (1) |
138 | IBM TP T30 236681A ??? (*) |
139 | IBM TP T40 / Type 2373-MU4 none (1) |
140 | IBM TP T40p none (1) |
141 | IBM TP R40p s3_bios (2) |
142 | IBM TP T41p s3_bios (2), switch to X after resume |
143 | IBM TP T42 s3_bios (2) |
144 | IBM ThinkPad T42p (2373-GTG) s3_bios (2) |
145 | IBM TP X20 ??? (*) |
146 | IBM TP X30 s3_bios, s3_mode (4) |
147 | IBM TP X31 / Type 2672-XXH none (1), use radeontool (http://fdd.com/software/radeon/) to turn off backlight. |
148 | IBM TP X32 none (1), but backlight is on and video is trashed after long suspend. s3_bios,s3_mode (4) works too. Perhaps that gets better results? |
149 | IBM Thinkpad X40 Type 2371-7JG s3_bios,s3_mode (4) |
150 | IBM TP 600e none(1), but a switch to console and back to X is needed |
151 | Medion MD4220 ??? (*) |
152 | Samsung P35 vbetool needed (6) |
153 | Sharp PC-AR10 (ATI rage) none (1), backlight does not switch off |
154 | Sony Vaio PCG-C1VRX/K s3_bios (2) |
155 | Sony Vaio PCG-F403 ??? (*) |
156 | Sony Vaio PCG-GRT995MP none (1), works with 'nv' X driver |
157 | Sony Vaio PCG-GR7/K none (1), but needs radeonfb, use radeontool (http://fdd.com/software/radeon/) to turn off backlight. |
158 | Sony Vaio PCG-N505SN ??? (*) |
159 | Sony Vaio vgn-s260 X or boot-radeon can init it (5) |
160 | Sony Vaio vgn-S580BH vga=normal, but suspend from X. Console will be blank unless you return to X. |
161 | Sony Vaio vgn-FS115B s3_bios (2),s3_mode (4) |
162 | Toshiba Libretto L5 none (1) |
163 | Toshiba Libretto 100CT/110CT vbetool (6) |
164 | Toshiba Portege 3020CT s3_mode (3) |
165 | Toshiba Satellite 4030CDT s3_mode (3) (S1 also works OK) |
166 | Toshiba Satellite 4080XCDT s3_mode (3) (S1 also works OK) |
167 | Toshiba Satellite 4090XCDT ??? (*) |
168 | Toshiba Satellite P10-554 s3_bios,s3_mode (4)(****) |
169 | Toshiba M30 (2) xor X with nvidia driver using internal AGP |
170 | Uniwill 244IIO ??? (*) |
171 | |
172 | Known working desktop systems |
173 | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
174 | |
175 | Mainboard Graphics card hack (or "how to do it") |
176 | ------------------------------------------------------------------------------ |
177 | Asus A7V8X nVidia RIVA TNT2 model 64 s3_bios,s3_mode (4) |
178 | |
179 | |
180 | (*) from https://wiki.ubuntu.com/HoaryPMResults, not sure |
181 | which options to use. If you know, please tell me. |
182 | |
183 | (***) To be tested with a newer kernel. |
184 | |
185 | (****) Not with SMP kernel, UP only. |
186 |
Branches:
ben-wpan
ben-wpan-stefan
javiroman/ks7010
jz-2.6.34
jz-2.6.34-rc5
jz-2.6.34-rc6
jz-2.6.34-rc7
jz-2.6.35
jz-2.6.36
jz-2.6.37
jz-2.6.38
jz-2.6.39
jz-3.0
jz-3.1
jz-3.11
jz-3.12
jz-3.13
jz-3.15
jz-3.16
jz-3.18-dt
jz-3.2
jz-3.3
jz-3.4
jz-3.5
jz-3.6
jz-3.6-rc2-pwm
jz-3.9
jz-3.9-clk
jz-3.9-rc8
jz47xx
jz47xx-2.6.38
master
Tags:
od-2011-09-04
od-2011-09-18
v2.6.34-rc5
v2.6.34-rc6
v2.6.34-rc7
v3.9