Root/
1 | /*****************************************************************************/ |
2 | |
3 | /* |
4 | * yam.h -- YAM radio modem driver. |
5 | * |
6 | * Copyright (C) 1998 Frederic Rible F1OAT (frible@teaser.fr) |
7 | * Adapted from baycom.c driver written by Thomas Sailer (sailer@ife.ee.ethz.ch) |
8 | * |
9 | * This program is free software; you can redistribute it and/or modify |
10 | * it under the terms of the GNU General Public License as published by |
11 | * the Free Software Foundation; either version 2 of the License, or |
12 | * (at your option) any later version. |
13 | * |
14 | * This program is distributed in the hope that it will be useful, |
15 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
17 | * GNU General Public License for more details. |
18 | * |
19 | * You should have received a copy of the GNU General Public License |
20 | * along with this program; if not, write to the Free Software |
21 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
22 | * |
23 | * Please note that the GPL allows you to use the driver, NOT the radio. |
24 | * In order to use the radio, you need a license from the communications |
25 | * authority of your country. |
26 | * |
27 | * |
28 | */ |
29 | |
30 | /*****************************************************************************/ |
31 | |
32 | #define SIOCYAMRESERVED (0) |
33 | #define SIOCYAMSCFG (1) /* Set configuration */ |
34 | #define SIOCYAMGCFG (2) /* Get configuration */ |
35 | #define SIOCYAMSMCS (3) /* Set mcs data */ |
36 | |
37 | #define YAM_IOBASE (1 << 0) |
38 | #define YAM_IRQ (1 << 1) |
39 | #define YAM_BITRATE (1 << 2) /* Bit rate of radio port ->57600 */ |
40 | #define YAM_MODE (1 << 3) /* 0=simplex 1=duplex 2=duplex+tempo */ |
41 | #define YAM_HOLDDLY (1 << 4) /* duplex tempo (sec) */ |
42 | #define YAM_TXDELAY (1 << 5) /* Tx Delay (ms) */ |
43 | #define YAM_TXTAIL (1 << 6) /* Tx Tail (ms) */ |
44 | #define YAM_PERSIST (1 << 7) /* Persist (ms) */ |
45 | #define YAM_SLOTTIME (1 << 8) /* Slottime (ms) */ |
46 | #define YAM_BAUDRATE (1 << 9) /* Baud rate of rs232 port ->115200 */ |
47 | |
48 | #define YAM_MAXBITRATE 57600 |
49 | #define YAM_MAXBAUDRATE 115200 |
50 | #define YAM_MAXMODE 2 |
51 | #define YAM_MAXHOLDDLY 99 |
52 | #define YAM_MAXTXDELAY 999 |
53 | #define YAM_MAXTXTAIL 999 |
54 | #define YAM_MAXPERSIST 255 |
55 | #define YAM_MAXSLOTTIME 999 |
56 | |
57 | #define YAM_FPGA_SIZE 5302 |
58 | |
59 | struct yamcfg { |
60 | unsigned int mask; /* Mask of commands */ |
61 | unsigned int iobase; /* IO Base of COM port */ |
62 | unsigned int irq; /* IRQ of COM port */ |
63 | unsigned int bitrate; /* Bit rate of radio port */ |
64 | unsigned int baudrate; /* Baud rate of the RS232 port */ |
65 | unsigned int txdelay; /* TxDelay */ |
66 | unsigned int txtail; /* TxTail */ |
67 | unsigned int persist; /* Persistence */ |
68 | unsigned int slottime; /* Slottime */ |
69 | unsigned int mode; /* mode 0 (simp), 1(Dupl), 2(Dupl+delay) */ |
70 | unsigned int holddly; /* PTT delay in FullDuplex 2 mode */ |
71 | }; |
72 | |
73 | struct yamdrv_ioctl_cfg { |
74 | int cmd; |
75 | struct yamcfg cfg; |
76 | }; |
77 | |
78 | struct yamdrv_ioctl_mcs { |
79 | int cmd; |
80 | int bitrate; |
81 | unsigned char bits[YAM_FPGA_SIZE]; |
82 | }; |
83 |
Branches:
ben-wpan
ben-wpan-stefan
javiroman/ks7010
jz-2.6.34
jz-2.6.34-rc5
jz-2.6.34-rc6
jz-2.6.34-rc7
jz-2.6.35
jz-2.6.36
jz-2.6.37
jz-2.6.38
jz-2.6.39
jz-3.0
jz-3.1
jz-3.11
jz-3.12
jz-3.13
jz-3.15
jz-3.16
jz-3.18-dt
jz-3.2
jz-3.3
jz-3.4
jz-3.5
jz-3.6
jz-3.6-rc2-pwm
jz-3.9
jz-3.9-clk
jz-3.9-rc8
jz47xx
jz47xx-2.6.38
master
Tags:
od-2011-09-04
od-2011-09-18
v2.6.34-rc5
v2.6.34-rc6
v2.6.34-rc7
v3.9