Root/scripts/Makefile.build

1# ==========================================================================
2# Building
3# ==========================================================================
4
5src := $(obj)
6
7PHONY := __build
8__build:
9
10# Init all relevant variables used in kbuild files so
11# 1) they have correct type
12# 2) they do not inherit any value from the environment
13obj-y :=
14obj-m :=
15lib-y :=
16lib-m :=
17always :=
18targets :=
19subdir-y :=
20subdir-m :=
21EXTRA_AFLAGS :=
22EXTRA_CFLAGS :=
23EXTRA_CPPFLAGS :=
24EXTRA_LDFLAGS :=
25asflags-y :=
26ccflags-y :=
27cppflags-y :=
28ldflags-y :=
29
30subdir-asflags-y :=
31subdir-ccflags-y :=
32
33# Read auto.conf if it exists, otherwise ignore
34-include include/config/auto.conf
35
36include scripts/Kbuild.include
37
38# For backward compatibility check that these variables do not change
39save-cflags := $(CFLAGS)
40
41# The filename Kbuild has precedence over Makefile
42kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))
43kbuild-file := $(if $(wildcard $(kbuild-dir)/Kbuild),$(kbuild-dir)/Kbuild,$(kbuild-dir)/Makefile)
44include $(kbuild-file)
45
46# If the save-* variables changed error out
47ifeq ($(KBUILD_NOPEDANTIC),)
48        ifneq ("$(save-cflags)","$(CFLAGS)")
49                $(error CFLAGS was changed in "$(kbuild-file)". Fix it to use EXTRA_CFLAGS)
50        endif
51endif
52include scripts/Makefile.lib
53
54ifdef host-progs
55ifneq ($(hostprogs-y),$(host-progs))
56$(warning kbuild: $(obj)/Makefile - Usage of host-progs is deprecated. Please replace with hostprogs-y!)
57hostprogs-y += $(host-progs)
58endif
59endif
60
61# Do not include host rules unless needed
62ifneq ($(hostprogs-y)$(hostprogs-m),)
63include scripts/Makefile.host
64endif
65
66ifneq ($(KBUILD_SRC),)
67# Create output directory if not already present
68_dummy := $(shell [ -d $(obj) ] || mkdir -p $(obj))
69
70# Create directories for object files if directory does not exist
71# Needed when obj-y := dir/file.o syntax is used
72_dummy := $(foreach d,$(obj-dirs), $(shell [ -d $(d) ] || mkdir -p $(d)))
73endif
74
75ifndef obj
76$(warning kbuild: Makefile.build is included improperly)
77endif
78
79# ===========================================================================
80
81ifneq ($(strip $(lib-y) $(lib-m) $(lib-n) $(lib-)),)
82lib-target := $(obj)/lib.a
83endif
84
85ifneq ($(strip $(obj-y) $(obj-m) $(obj-n) $(obj-) $(lib-target)),)
86builtin-target := $(obj)/built-in.o
87endif
88
89modorder-target := $(obj)/modules.order
90
91# We keep a list of all modules in $(MODVERDIR)
92
93__build: $(if $(KBUILD_BUILTIN),$(builtin-target) $(lib-target) $(extra-y)) \
94     $(if $(KBUILD_MODULES),$(obj-m) $(modorder-target)) \
95     $(subdir-ym) $(always)
96    @:
97
98# Linus' kernel sanity checking tool
99ifneq ($(KBUILD_CHECKSRC),0)
100  ifeq ($(KBUILD_CHECKSRC),2)
101    quiet_cmd_force_checksrc = CHECK $<
102          cmd_force_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $< ;
103  else
104      quiet_cmd_checksrc = CHECK $<
105            cmd_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $< ;
106  endif
107endif
108
109# Do section mismatch analysis for each module/built-in.o
110ifdef CONFIG_DEBUG_SECTION_MISMATCH
111  cmd_secanalysis = ; scripts/mod/modpost $@
112endif
113
114# Compile C sources (.c)
115# ---------------------------------------------------------------------------
116
117# Default is built-in, unless we know otherwise
118modkern_cflags = $(if $(part-of-module), $(CFLAGS_MODULE), $(CFLAGS_KERNEL))
119quiet_modtag := $(empty) $(empty)
120
121$(real-objs-m) : part-of-module := y
122$(real-objs-m:.o=.i) : part-of-module := y
123$(real-objs-m:.o=.s) : part-of-module := y
124$(real-objs-m:.o=.lst): part-of-module := y
125
126$(real-objs-m) : quiet_modtag := [M]
127$(real-objs-m:.o=.i) : quiet_modtag := [M]
128$(real-objs-m:.o=.s) : quiet_modtag := [M]
129$(real-objs-m:.o=.lst): quiet_modtag := [M]
130
131$(obj-m) : quiet_modtag := [M]
132
133# Default for not multi-part modules
134modname = $(basetarget)
135
136$(multi-objs-m) : modname = $(modname-multi)
137$(multi-objs-m:.o=.i) : modname = $(modname-multi)
138$(multi-objs-m:.o=.s) : modname = $(modname-multi)
139$(multi-objs-m:.o=.lst) : modname = $(modname-multi)
140$(multi-objs-y) : modname = $(modname-multi)
141$(multi-objs-y:.o=.i) : modname = $(modname-multi)
142$(multi-objs-y:.o=.s) : modname = $(modname-multi)
143$(multi-objs-y:.o=.lst) : modname = $(modname-multi)
144
145quiet_cmd_cc_s_c = CC $(quiet_modtag) $@
146cmd_cc_s_c = $(CC) $(c_flags) -fverbose-asm -S -o $@ $<
147
148$(obj)/%.s: $(src)/%.c FORCE
149    $(call if_changed_dep,cc_s_c)
150
151quiet_cmd_cc_i_c = CPP $(quiet_modtag) $@
152cmd_cc_i_c = $(CPP) $(c_flags) -o $@ $<
153
154$(obj)/%.i: $(src)/%.c FORCE
155    $(call if_changed_dep,cc_i_c)
156
157cmd_gensymtypes = \
158    $(CPP) -D__GENKSYMS__ $(c_flags) $< | \
159    $(GENKSYMS) -T $@ -a $(ARCH) \
160     $(if $(KBUILD_PRESERVE),-p) \
161     $(if $(1),-r $(firstword $(wildcard $(@:.symtypes=.symref) /dev/null)))
162
163quiet_cmd_cc_symtypes_c = SYM $(quiet_modtag) $@
164cmd_cc_symtypes_c = \
165    set -e; \
166    $(call cmd_gensymtypes, true) >/dev/null; \
167    test -s $@ || rm -f $@
168
169$(obj)/%.symtypes : $(src)/%.c FORCE
170    $(call cmd,cc_symtypes_c)
171
172# C (.c) files
173# The C file is compiled and updated dependency information is generated.
174# (See cmd_cc_o_c + relevant part of rule_cc_o_c)
175
176quiet_cmd_cc_o_c = CC $(quiet_modtag) $@
177
178ifndef CONFIG_MODVERSIONS
179cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
180
181else
182# When module versioning is enabled the following steps are executed:
183# o compile a .tmp_<file>.o from <file>.c
184# o if .tmp_<file>.o doesn't contain a __ksymtab version, i.e. does
185# not export symbols, we just rename .tmp_<file>.o to <file>.o and
186# are done.
187# o otherwise, we calculate symbol versions using the good old
188# genksyms on the preprocessed source and postprocess them in a way
189# that they are usable as a linker script
190# o generate <file>.o from .tmp_<file>.o using the linker to
191# replace the unresolved symbols __crc_exported_symbol with
192# the actual value of the checksum generated by genksyms
193
194cmd_cc_o_c = $(CC) $(c_flags) -c -o $(@D)/.tmp_$(@F) $<
195cmd_modversions = \
196    if $(OBJDUMP) -h $(@D)/.tmp_$(@F) | grep -q __ksymtab; then \
197        $(call cmd_gensymtypes, $(KBUILD_SYMTYPES)) \
198            > $(@D)/.tmp_$(@F:.o=.ver); \
199                                    \
200        $(LD) $(LDFLAGS) -r -o $@ $(@D)/.tmp_$(@F) \
201            -T $(@D)/.tmp_$(@F:.o=.ver); \
202        rm -f $(@D)/.tmp_$(@F) $(@D)/.tmp_$(@F:.o=.ver); \
203    else \
204        mv -f $(@D)/.tmp_$(@F) $@; \
205    fi;
206endif
207
208ifdef CONFIG_FTRACE_MCOUNT_RECORD
209cmd_record_mcount = set -e ; perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \
210    "$(if $(CONFIG_64BIT),64,32)" \
211    "$(OBJDUMP)" "$(OBJCOPY)" "$(CC)" "$(LD)" "$(NM)" "$(RM)" "$(MV)" \
212    "$(if $(part-of-module),1,0)" "$(@)";
213endif
214
215define rule_cc_o_c
216    $(call echo-cmd,checksrc) $(cmd_checksrc) \
217    $(call echo-cmd,cc_o_c) $(cmd_cc_o_c); \
218    $(cmd_modversions) \
219    $(call echo-cmd,record_mcount) \
220    $(cmd_record_mcount) \
221    scripts/basic/fixdep $(depfile) $@ '$(call make-cmd,cc_o_c)' > \
222                                                  $(dot-target).tmp; \
223    rm -f $(depfile); \
224    mv -f $(dot-target).tmp $(dot-target).cmd
225endef
226
227# Built-in and composite module parts
228$(obj)/%.o: $(src)/%.c FORCE
229    $(call cmd,force_checksrc)
230    $(call if_changed_rule,cc_o_c)
231
232# Single-part modules are special since we need to mark them in $(MODVERDIR)
233
234$(single-used-m): $(obj)/%.o: $(src)/%.c FORCE
235    $(call cmd,force_checksrc)
236    $(call if_changed_rule,cc_o_c)
237    @{ echo $(@:.o=.ko); echo $@; } > $(MODVERDIR)/$(@F:.o=.mod)
238
239quiet_cmd_cc_lst_c = MKLST $@
240      cmd_cc_lst_c = $(CC) $(c_flags) -g -c -o $*.o $< && \
241             $(CONFIG_SHELL) $(srctree)/scripts/makelst $*.o \
242                     System.map $(OBJDUMP) > $@
243
244$(obj)/%.lst: $(src)/%.c FORCE
245    $(call if_changed_dep,cc_lst_c)
246
247# Compile assembler sources (.S)
248# ---------------------------------------------------------------------------
249
250modkern_aflags := $(AFLAGS_KERNEL)
251
252$(real-objs-m) : modkern_aflags := $(AFLAGS_MODULE)
253$(real-objs-m:.o=.s): modkern_aflags := $(AFLAGS_MODULE)
254
255quiet_cmd_as_s_S = CPP $(quiet_modtag) $@
256cmd_as_s_S = $(CPP) $(a_flags) -o $@ $<
257
258$(obj)/%.s: $(src)/%.S FORCE
259    $(call if_changed_dep,as_s_S)
260
261quiet_cmd_as_o_S = AS $(quiet_modtag) $@
262cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $<
263
264$(obj)/%.o: $(src)/%.S FORCE
265    $(call if_changed_dep,as_o_S)
266
267targets += $(real-objs-y) $(real-objs-m) $(lib-y)
268targets += $(extra-y) $(MAKECMDGOALS) $(always)
269
270# Linker scripts preprocessor (.lds.S -> .lds)
271# ---------------------------------------------------------------------------
272quiet_cmd_cpp_lds_S = LDS $@
273      cmd_cpp_lds_S = $(CPP) $(cpp_flags) -P -C -U$(ARCH) \
274                         -D__ASSEMBLY__ -DLINKER_SCRIPT -o $@ $<
275
276$(obj)/%.lds: $(src)/%.lds.S FORCE
277    $(call if_changed_dep,cpp_lds_S)
278
279# Build the compiled-in targets
280# ---------------------------------------------------------------------------
281
282# To build objects in subdirs, we need to descend into the directories
283$(sort $(subdir-obj-y)): $(subdir-ym) ;
284
285#
286# Rule to compile a set of .o files into one .o file
287#
288ifdef builtin-target
289quiet_cmd_link_o_target = LD $@
290# If the list of objects to link is empty, just create an empty built-in.o
291cmd_link_o_target = $(if $(strip $(obj-y)),\
292              $(LD) $(ld_flags) -r -o $@ $(filter $(obj-y), $^) \
293              $(cmd_secanalysis),\
294              rm -f $@; $(AR) rcs $@)
295
296$(builtin-target): $(obj-y) FORCE
297    $(call if_changed,link_o_target)
298
299targets += $(builtin-target)
300endif # builtin-target
301
302#
303# Rule to create modules.order file
304#
305# Create commands to either record .ko file or cat modules.order from
306# a subdirectory
307modorder-cmds = \
308    $(foreach m, $(modorder), \
309        $(if $(filter %/modules.order, $m), \
310            cat $m;, echo kernel/$m;))
311
312$(modorder-target): $(subdir-ym) FORCE
313    $(Q)(cat /dev/null; $(modorder-cmds)) > $@
314
315#
316# Rule to compile a set of .o files into one .a file
317#
318ifdef lib-target
319quiet_cmd_link_l_target = AR $@
320cmd_link_l_target = rm -f $@; $(AR) rcs $@ $(lib-y)
321
322$(lib-target): $(lib-y) FORCE
323    $(call if_changed,link_l_target)
324
325targets += $(lib-target)
326endif
327
328#
329# Rule to link composite objects
330#
331# Composite objects are specified in kbuild makefile as follows:
332# <composite-object>-objs := <list of .o files>
333# or
334# <composite-object>-y := <list of .o files>
335link_multi_deps = \
336$(filter $(addprefix $(obj)/, \
337$($(subst $(obj)/,,$(@:.o=-objs))) \
338$($(subst $(obj)/,,$(@:.o=-y)))), $^)
339 
340quiet_cmd_link_multi-y = LD $@
341cmd_link_multi-y = $(LD) $(ld_flags) -r -o $@ $(link_multi_deps) $(cmd_secanalysis)
342
343quiet_cmd_link_multi-m = LD [M] $@
344cmd_link_multi-m = $(cmd_link_multi-y)
345
346# We would rather have a list of rules like
347# foo.o: $(foo-objs)
348# but that's not so easy, so we rather make all composite objects depend
349# on the set of all their parts
350$(multi-used-y) : %.o: $(multi-objs-y) FORCE
351    $(call if_changed,link_multi-y)
352
353$(multi-used-m) : %.o: $(multi-objs-m) FORCE
354    $(call if_changed,link_multi-m)
355    @{ echo $(@:.o=.ko); echo $(link_multi_deps); } > $(MODVERDIR)/$(@F:.o=.mod)
356
357targets += $(multi-used-y) $(multi-used-m)
358
359
360# Descending
361# ---------------------------------------------------------------------------
362
363PHONY += $(subdir-ym)
364$(subdir-ym):
365    $(Q)$(MAKE) $(build)=$@
366
367# Add FORCE to the prequisites of a target to force it to be always rebuilt.
368# ---------------------------------------------------------------------------
369
370PHONY += FORCE
371
372FORCE:
373
374# Read all saved command lines and dependencies for the $(targets) we
375# may be building above, using $(if_changed{,_dep}). As an
376# optimization, we don't need to read them if the target does not
377# exist, we will rebuild anyway in that case.
378
379targets := $(wildcard $(sort $(targets)))
380cmd_files := $(wildcard $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
381
382ifneq ($(cmd_files),)
383  include $(cmd_files)
384endif
385
386
387# Declare the contents of the .PHONY variable as phony. We keep that
388# information in a variable se we can use it in if_changed and friends.
389
390.PHONY: $(PHONY)
391

Archive Download this file



interactive