# Mappings for Faderfox LV3 # # These mappings translate all controls of an LV3 with factory settings to # channel 0. To do a factory reset, do this: # # - press and hold FX and Master for one second, until the LED above Shift # turns yello # - press FX1 and FX2 together (near the joystick) # - press and hold FX and Master until the yellow LED turns off # - the LV3 will reset within a few seconds # # # "Radio" buttons change the LED assignment and only emit a 127 for the # function that's been activated, but never a 0. Pressing a button that's # already on repeats it. # # The radio buttons also affect the channel the rotary decoders use. # c.24=c0.1 # Rotary encoders, turn, differential (without decay) c.25=c0.2 c.26=c0.3 c.27=c0.4 c.28=c0.5 # Rotary encoders, push, toggle (with LED) c.29=c0.6 # if shifted, push, tact (127/0) c.30=c0.7 c.31=c0.8 c8.8=c0.9=8 # FX, push when off, radio (LED on) c9.8=c0.9=9 # FX, push when on, radio (LED blinking) c10.8=c0.9=10 # Master, push, radio (LED on) c0.8=c0.9=0 # Black, push, buttons, radio c1.8=c0.9=1 c2.8=c0.9=2 c3.8=c0.9=3 c4.8=c0.9=4 c5.8=c0.9=5 c6.8=c0.9=6 c7.8=c0.9=7 c0.22=c0.10 # Black + Shift, push, toggle (with LED) c1.22=c0.11 c2.22=c0.12 c3.22=c0.13 c4.22=c0.14 c5.22=c0.15 c6.22=c0.16 c7.22=c0.17 # c0.18, c0.19 unused c0.7=c0.20 # Faders c1.7=c0.21 c2.7=c0.22 c3.7=c0.23 c4.7=c0.24 c5.7=c0.25 c6.7=c0.26 c7.7=c0.27 # c0.28, c0.29 unused c0.16=c0.30 # Green buttons, push, tact (127/0) c1.16=c0.31 c2.16=c0.32 c3.16=c0.33 c4.16=c0.34 c5.16=c0.35 c6.16=c0.36 c7.16=c0.37 c0.17=c0.38=0 # Blue buttons, push, tact (127 only) c1.17=c0.38=1 # since we don't have pulsed buttons (yet), treat them as radio c2.17=c0.38=2 c3.17=c0.38=3 c4.17=c0.38=4 c5.17=c0.38=5 c6.17=c0.38=6 c7.17=c0.38=7 # c0.39 unused c0.18=c0.40 # Green + Shift, push, toggle (with LED) c1.18=c0.41 c2.18=c0.42 c3.18=c0.43 c4.18=c0.44 c5.18=c0.45 c6.18=c0.47 c7.18=c0.48 # c0.48, c0.49 unused c8.1=c0.50 # Left joystick, X c8.2=c0.51 # Left joystick, Y c8.4=c0.52 # FX1, push, toggle (with LED) c8.5=c0.53 # FX1 + Shift, push, toggle (with LED) # c0.54 unused c9.1=c0.55 # Right joystick, X c9.2=c0.56 # Right joystick, Y c9.4=c0.57 # FX2, push, toggle (with LED) c9.5=c0.58 # FX2 + Shift, push, toggle (with LED) # c0.59 unused c10.6=c0.60 # Scene, turn, differential (no decay) c11.9=c0.61 # Scene + Shift c10.3=c0.6 # Scene, push, tact (127/0) # c10.0 is Scene + Shift, push, tact (127 only) # # MIDI In controls: # # c0.6 Scene display (0-99) # c0.16 through c7.16 LEDs green buttons (0, non-zero) # c0.17 through c7.17 LEDs blue buttons (0, non-zero) # ... #