Milkymist One

m1 POWER FPGA_Dec FPGA_BANK0 FPGA_BANK1 FPGA_BANK2 FPGA_BANK3 EXPANSION_RESET DRAM NOR_FLASH AUDIO DVI-I VIDEO_IN MISC_CONTROL ETHERNET USB_A-B USB_C-D USB_E-F MISC FPGA FPGA_P1 FPGA_P2 PowerTree All sheets
>>> Adam Wang <adam@qi-hardware.com>
    Wed Jun 27 12:05:02 2012 +0800

    removed R60(DNP), R61(DNP); see reasons in details in #milkymist: http://en.qi-hardware.com/mmlogs/milkymist_2012-06-27.log.html#t01:32
>>> Adam Wang <adam@qi-hardware.com>
    Mon Jun 25 10:41:59 2012 +0800

    Power_Tree.sch: added currents
>>> Adam Wang <adam@qi-hardware.com>
    Fri Jun 22 15:52:22 2012 +0800

    Power_Tree.sch: added info for FPGA block
>>> Adam Wang <adam@qi-hardware.com>
    Fri Jun 22 11:29:58 2012 +0800

    added brand and classification name of fields and enable both for chips.
>>> Adam Wang <adam@qi-hardware.com>
    Thu Jun 21 17:19:29 2012 +0800

    FPGA_BANK2.sch: added configuration table for FPGA_M[1:0] nets.
>>> Adam Wang <adam@qi-hardware.com>
    Thu Jun 21 16:27:45 2012 +0800

    USBExtPort1.sch: added Pull up/down configuration table for Host and Full/Low-speed Device.
>>> Adam Wang <adam@qi-hardware.com>
    Thu Jun 21 12:16:18 2012 +0800

    updated power tree contents and added notes, not finished yet.
>>> Adam Wang <adam@qi-hardware.com>
    Wed Jun 20 10:32:39 2012 +0800

    Power_Tree.sch: added new sheet for power tree
>>> Adam Wang <adam@qi-hardware.com>
    Mon May 21 10:49:31 2012 +0800

    DVI-ISingle.sch: fixed cross-style junction between R[144..146] and GND.
>>> Adam Wang <adam@qi-hardware.com>
    Mon May 21 09:57:07 2012 +0800

    Dram.sch: fixed wrong type texts on C163+C244 instead of C162+C244
>>> Adam Wang <adam@qi-hardware.com>
    Sat May 19 10:48:29 2012 +0800

    Dram.sch: moved C156 to right of C252.
>>> Adam Wang <adam@qi-hardware.com>
    Sat May 19 10:37:35 2012 +0800

    Dram.sch: indicating bypass capacitors to dram pins
>>> Adam Wang <adam@qi-hardware.com>
    Fri May 18 21:54:07 2012 +0800

    followed by: http://lists.milkymist.org/pipermail/devel-milkymist.org/2012-May/003034.html
>>> Adam Wang <adam@qi-hardware.com>
    Thu May 17 15:11:25 2012 +0800

    followed by: http://lists.milkymist.org/pipermail/devel-milkymist.org/2012-May/003032.html
>>> Adam Wang <adam@qi-hardware.com>
    Tue May 15 11:24:25 2012 +0800

    Misc.sch: removed text of "Placement (TP32, TP38-TP41) at the bottom of PCB."
>>> Adam Wang <adam@qi-hardware.com>
    Fri May 11 11:43:50 2012 +0800

    Misc.sch: removed duplicated lable.
>>> Adam Wang <adam@qi-hardware.com>
    Fri May 11 11:41:01 2012 +0800

    Misc.sch: 1. mirror few leds to not overlap '2' pin number. 2. added lables for leds
>>> Adam Wang <adam@qi-hardware.com>
    Wed May 9 14:22:21 2012 +0800

    MiscControl.sch: changed D[6..13] to chip name ZENER-13
>>> Adam Wang <adam@qi-hardware.com>
    Wed May 9 10:54:19 2012 +0800

    Audio.sch: moved texts to better places.
>>> Adam Wang <adam@qi-hardware.com>
    Wed May 9 10:42:01 2012 +0800

    MiscControl.sch: make zerners vertically
>>> Adam Wang <adam@qi-hardware.com>
    Tue May 8 17:19:22 2012 +0800

    followed http://lists.milkymist.org/pipermail/devel-milkymist.org/2012-May/003001.html
>>> Adam Wang <adam@qi-hardware.com>
    Tue May 8 12:20:01 2012 +0800

    modified notes text by Werner's better suggesttions. :-)
>>> Adam Wang <adam@qi-hardware.com>
    Tue May 8 12:16:30 2012 +0800

    Ethernet.sch: dragged nETH_RESET up and put the resistor R174 (and GND) under it.
>>> Adam Wang <adam@qi-hardware.com>
    Tue May 8 12:05:27 2012 +0800

    added Board revision histories.
>>> Adam Wang <adam@qi-hardware.com>
    Mon May 7 20:55:05 2012 +0800

    fixed few items by followed: http://lists.milkymist.org/pipermail/devel-milkymist.org/2012-May/003001.html
>>> Adam Wang <adam@qi-hardware.com>
    Fri May 4 09:39:59 2012 +0800

    make ground symbols downward if there's more space. otherwise upward.
>>> Adam Wang <adam@qi-hardware.com>
    Fri May 4 09:36:38 2012 +0800

    make D+, D- lines with more clearance
>>> Werner Almesberger <werner@almesberger.net>
    Thu May 3 01:05:48 2012 -0300

    r4/m1.pro: keep ../../kicad-libs/components in LibDir
>>> Adam Wang <adam@qi-hardware.com>
    Thu May 3 11:38:59 2012 +0800

    split FPGA_P[1..2].sch into FPGA_BANK[0..3].sch and EXPANSION_RESET.sch
>>> Adam Wang <adam@qi-hardware.com>
    Thu May 3 11:29:30 2012 +0800

    1. split FPGA_P[1..2].sch into FPGA_BANK[0..3].sch and EXPANSION_RESET.sch 2. moved few applicative power symbols into local folder ../components/ 3. followed http://en.qi-hardware.com/wiki/Rules_on_Editing_Schematics to embellish schematics 4. results of Eeschema ERC: without any Err used defau...
>>> Adam Wang <adam@qi-hardware.com>
    Fri Apr 27 18:59:22 2012 +0800

    for better look: followed http://en.qi-hardware.com/wiki/Rules_on_Editing_Schematics
>>> Adam Wang <adam@qi-hardware.com>
    Fri Apr 27 14:05:11 2012 +0800

    followed http://en.qi-hardware.com/wiki/Rules_on_Editing_Schematics but not finished yet.
>>> Adam Wang <adam@qi-hardware.com>
    Wed Apr 25 19:03:09 2012 +0800

    followed: http://en.qi-hardware.com/wiki/Rules_on_Editing_Schematics#Naming_Values_and_Units to unify value's naming rule
>>> Adam Wang <adam@qi-hardware.com>
    Wed Apr 25 16:49:42 2012 +0800

    unify value's naming rule
>>> Adam Wang <adam@qi-hardware.com>
    Wed Apr 25 15:41:06 2012 +0800

    DVI-ISingle.sch: used POWERED flg to drive VAA pins of U18.
>>> Adam Wang <adam@qi-hardware.com>
    Wed Apr 25 14:07:49 2012 +0800

    used POWERED symbol (in powered.lib) to replace power symbols of AUDIO_AVDD, ETH_PLL1V8, ETH_A1V8, ETH_A3V3, VIDEOIN_A3V3, VIDEOIN_A1V8 and IR_PWR
>>> Adam Wang <adam@qi-hardware.com>
    Tue Apr 24 19:04:25 2012 +0800

    this commit is to free warnings as: http://downloads.qi-hardware.com/people/adam/m1/tmp/kicad/20120424_3494_6-warnings.png
>>> Adam Wang <adam@qi-hardware.com>
    Tue Apr 24 17:42:13 2012 +0800

    sheet numbers were changed by split, other sheets need to be commited all.
>>> Adam Wang <adam@qi-hardware.com>
    Tue Apr 24 17:19:13 2012 +0800

    split FPGA.sch(A2 size) into two A3 size: FPGA_P1.sch, FPGA_P2.sch
>>> Xiangfu <xiangfu@openmobilefree.net>
    Mon Apr 23 22:13:51 2012 +0800

    FPGAdec.sch: remove 2 useless junctions
>>> Adam Wang <adam@qi-hardware.com>
    Mon Apr 23 21:06:16 2012 +0800

    added bigger text within each hierarchical rectangle by functional naming.
>>> Werner Almesberger <werner@almesberger.net>
    Mon Apr 23 07:32:50 2012 -0300

    r4/Power.sch: replaced PWR_FLAG with new POWERED
>>> Adam Wang <adam@qi-hardware.com>
    Mon Apr 23 16:53:58 2012 +0800

    latest updated files
>>> Adam Wang <adam@qi-hardware.com>
    Mon Apr 23 11:09:59 2012 +0800

    added ETH_A3V3, ETH_A1V8, ETH_PLL1V8 components to fix ErrType(3): Pin connected to some others pins but no pin to drive it. (i.e. a local lable can't drive to a type of Power input).
>>> Adam Wang <adam@qi-hardware.com>
    Mon Apr 23 11:05:54 2012 +0800

    added VIDEOIN_A3V3, VIDEOIN_A1V8 components to fix ErrType(3): Pin connected to some others pins but no pin to drive it. (i.e. a local lable can't drive to a type of Power input).
>>> Adam Wang <adam@qi-hardware.com>
    Mon Apr 23 09:13:04 2012 +0800

    corrected J21 pin assignments
>>> Adam Wang <adam@qi-hardware.com>
    Sun Apr 22 13:46:01 2012 +0800

    changed U18's pin16 local lable VGA_B7 to VGA_B0
>>> Adam Wang <adam@qi-hardware.com>
    Sun Apr 22 13:40:55 2012 +0800

    added R183 & changed FLASH_STS_N to FLASH_STS
>>> Adam Wang <adam@qi-hardware.com>
    Sun Apr 22 10:43:28 2012 +0800

    fixed Uncoonected wires which caused by continuous global lable arrangement of FLASH_D[15..0].
>>> Adam Wang <adam@qi-hardware.com>
    Sat Apr 21 21:16:40 2012 +0800

    fixed: 1. unnecessary local labes 2. added PWR_FLG.
>>> Adam Wang <adam@qi-hardware.com>
    Fri Apr 20 21:31:24 2012 +0800

    fixed duplicate reference and added PWR_FLG from power.lib
>>> Adam Wang <adam@qi-hardware.com>
    Fri Apr 20 21:15:09 2012 +0800

    MISC_CONTROL: missed J10 reference.
>>> Adam Wang <adam@qi-hardware.com>
    Fri Apr 20 20:38:35 2012 +0800

     FPGAdes: few cap. changed to C_P chip name.
>>> Xiangfu <xiangfu@openmobilefree.net>
    Fri Apr 20 17:53:11 2012 +0800

    MISC: update J6 about label
>>> Xiangfu <xiangfu@openmobilefree.net>
    Fri Apr 20 17:40:03 2012 +0800

    FPGAdes: add junctions, finish FPGAdes
>>> Xiangfu <xiangfu@openmobilefree.net>
    Fri Apr 20 17:31:56 2012 +0800

    FPGAdes: update datasheet and P/N
>>> Adam Wang <adam@qi-hardware.com>
    Fri Apr 20 17:27:44 2012 +0800

    rough Misc.sch done
>>> Xiangfu <xiangfu@openmobilefree.net>
    Fri Apr 20 17:05:58 2012 +0800

    FPGAdes: finish all labels
>>> Adam Wang <adam@qi-hardware.com>
    Fri Apr 20 16:15:00 2012 +0800

    rough Dram.sch done
>>> Adam Wang <adam@qi-hardware.com>
    Fri Apr 20 10:57:30 2012 +0800

    rough MiscControl.sch done
>>> Adam Wang <adam@qi-hardware.com>
    Thu Apr 19 18:06:00 2012 +0800

    rough FPGA.sch done
>>> Adam Wang <adam@qi-hardware.com>
    Thu Apr 19 15:57:39 2012 +0800

    changed global label text size
>>> Adam Wang <adam@qi-hardware.com>
    Thu Apr 19 11:39:46 2012 +0800

    added VIDEOIN_LLC global lablel in VideoIn.sch
>>> Adam Wang <adam@qi-hardware.com>
    Thu Apr 19 10:57:56 2012 +0800

    place necessary parts
>>> Adam Wang <adam@qi-hardware.com>
    Wed Apr 18 20:50:54 2012 +0800

    place necessary parts in FPGA.sch
>>> Adam Wang <adam@qi-hardware.com>
    Wed Apr 18 18:55:28 2012 +0800

    rough DVI-ISingle.sch done
>>> Adam Wang <adam@qi-hardware.com>
    Wed Apr 18 15:30:52 2012 +0800

    rough Audio.sch done
>>> Xiangfu <xiangfu@openmobilefree.net>
    Tue Apr 17 22:46:57 2012 +0800

    MISC: add J5/J6/J19 and memcard connector, change the comment from local label to real comment
>>> Adam Wang <adam@qi-hardware.com>
    Tue Apr 17 17:32:56 2012 +0800

    from +3.3V to 3V3
>>> Adam Wang <adam@qi-hardware.com>
    Tue Apr 17 17:26:59 2012 +0800

    rough done on Power.sch
>>> Adam Wang <adam@qi-hardware.com>
    Tue Apr 17 15:04:13 2012 +0800

    chips added in
>>> Xiangfu <xiangfu@openmobilefree.net>
    Tue Apr 17 11:55:43 2012 +0800

    FPGAdec: add all components, haven't edit the label
>>> Adam Wang <adam@qi-hardware.com>
    Tue Apr 17 11:05:32 2012 +0800

    Ethernet.sch done
>>> Adam Wang <adam@qi-hardware.com>
    Tue Apr 17 09:27:41 2012 +0800

    linked to rca.lib
>>> Adam Wang <adam@qi-hardware.com>
    Mon Apr 16 21:38:58 2012 +0800

    linked bnc.lib and all parts in VideoIn.sch
>>> Xiangfu <xiangfu@openmobilefree.net>
    Mon Apr 16 17:54:57 2012 +0800

    use FSMRA2JH for sw2
>>> Xiangfu <xiangfu@openmobilefree.net>
    Mon Apr 16 17:38:08 2012 +0800

    MISC: add SW2
>>> Xiangfu <xiangfu@openmobilefree.net>
    Mon Apr 16 17:20:23 2012 +0800

    MISC: remove empty line, label don't support \n"
>>> Xiangfu <xiangfu@openmobilefree.net>
    Mon Apr 16 17:11:46 2012 +0800

    MISC: finish LED matrix
>>> Adam Wang <adam@qi-hardware.com>
    Mon Apr 16 16:42:49 2012 +0800

    added decoupling cap. into VideoIn.sch
>>> Adam Wang <adam@qi-hardware.com>
    Mon Apr 16 12:20:56 2012 +0800

    linked to newer C_P, 3V3, 5V, USBEXT5V, TESTPOINT chip name
>>> Xiangfu <xiangfu@openmobilefree.net>
    Mon Apr 16 09:14:27 2012 +0800

    update with kicad-libs. one lib per symbol
>>> Adam Wang <adam@qi-hardware.com>
    Fri Apr 13 20:52:06 2012 +0800

    added internal USB ports E/F
>>> Adam Wang <adam@qi-hardware.com>
    Fri Apr 13 20:30:57 2012 +0800

    added external USB ports C/D
>>> Adam Wang <adam@qi-hardware.com>
    Fri Apr 13 18:36:19 2012 +0800

    added external USB ports A/B
>>> Xiangfu <xiangfu@openmobilefree.net>
    Fri Apr 13 17:10:30 2012 +0800

    MISC: add LED matrix
>>> Adam Wang <adam@qi-hardware.com>
    Fri Apr 13 14:50:08 2012 +0800

    added Field for 'P/N' to part number and 'Smt' to record if DNP, correct connections.
>>> Werner Almesberger <werner@almesberger.net>
    Wed Apr 11 11:04:41 2012 -0300

    r4/m1.pro: added ../../kicad-libs/... to LibDir
>>> Xiangfu <xiangfu@openmobilefree.net>
    Wed Apr 11 21:49:19 2012 +0800

    NORFlash: finish NORFlash
>>> Xiangfu <xiangfu@openmobilefree.net>
    Wed Apr 11 21:08:18 2012 +0800

    NORFLASH: add GND and TP
>>> Xiangfu <xiangfu@openmobilefree.net>
    Wed Apr 11 18:58:33 2012 +0800

    NORFLASH: more wires
>>> Xiangfu <xiangfu@openmobilefree.net>
    Wed Apr 11 18:52:26 2012 +0800

    NORFLASH: finish FLASH_D local labels
>>> Xiangfu <xiangfu@openmobilefree.net>
    Wed Apr 11 18:48:45 2012 +0800

    NORFLASH: update with correct JS28F256J3F105
>>> Xiangfu <xiangfu@openmobilefree.net>
    Wed Apr 11 18:34:19 2012 +0800

    NORFLASH: add local labels, there is no A8 under JS28F256J3F105
>>> Xiangfu <xiangfu@openmobilefree.net>
    Wed Apr 11 18:27:35 2012 +0800

    NORFLASH: add gobal labels
>>> Xiangfu <xiangfu@openmobilefree.net>
    Wed Apr 11 18:13:12 2012 +0800

    NORFLASH: fix the label name, adjust the flash bus
>>> Xiangfu <xiangfu@openmobilefree.net>
    Wed Apr 11 18:09:20 2012 +0800

    NORFLAH: add FLASH D bus
>>> Xiangfu <xiangfu@openmobilefree.net>
    Wed Apr 11 17:58:05 2012 +0800

    NORFLAH: add FLASH bus
>>> Adam Wang <adam@qi-hardware.com>
    Mon Apr 9 10:44:46 2012 +0800

    added all empty schematics
>>> Adam Wang <adam@qi-hardware.com>
    Mon Apr 9 10:38:42 2012 +0800

    create empty hierarchical sheet for functional block alike.
>>> Werner Almesberger <werner@almesberger.net>
    Thu Mar 22 21:42:35 2012 -0300

    r4/: added basic m1 schematics files

2012-12-05 04:56:47 AM UTC