labsw

>>> Werner Almesberger <werner@almesberger.net>
    Fri Oct 21 20:54:45 2011 -0300

    labsw/ch12.sch: added BJT and diode current

>>> Werner Almesberger <werner@almesberger.net>
    Fri Sep 30 03:06:10 2011 -0300

    labsw/: re-layout for the various design changes (including potential separation)

>>> Werner Almesberger <werner@almesberger.net>
    Tue Sep 27 11:55:57 2011 -0300

    labsw/: redesigned rear connections to pair in/out by "near" potential

>>> Werner Almesberger <werner@almesberger.net>
    Sat Sep 10 20:42:00 2011 -0300

    labsw/: added hardware revision indication

>>> Werner Almesberger <werner@almesberger.net>
    Sat Sep 10 20:35:23 2011 -0300

    labsw/: added low-pass filters to button input (with help from Joerg Reisenweber)

>>> Werner Almesberger <werner@almesberger.net>
    Sat Sep 10 20:23:59 2011 -0300

    labsw/ changed internal pull-ups to external to remove sneak current path

>>> Werner Almesberger <werner@almesberger.net>
    Sat Sep 10 20:00:05 2011 -0300

    labsw/: power bypassing is now the way SiLabs recommend

>>> Werner Almesberger <werner@almesberger.net>
    Sat Sep 3 12:34:38 2011 -0300

    labsw/labsw.sch: label "IN_1" was in italics - changed to normal

>>> Werner Almesberger <werner@almesberger.net>
    Sat Sep 3 03:35:15 2011 -0300

    labsw/: changed resistors for opto-coupler LEDs from 180 to 150 Ohm

>>> Werner Almesberger <werner@almesberger.net>
    Sun Aug 28 12:04:38 2011 -0300

    labsw/: rotate P5 (opto out)

>>> Werner Almesberger <werner@almesberger.net>
    Sun Aug 28 10:46:02 2011 -0300

    labsw/: grouped opto-couplers for socketing; improved clearance of inputs

>>> Werner Almesberger <werner@almesberger.net>
    Sat Aug 27 18:24:02 2011 -0300

    labsw/: changed flyback diodes to SOT-323 (BAS16WT or similar)

>>> Werner Almesberger <werner@almesberger.net>
    Sat Aug 27 15:26:53 2011 -0300

    labsw/: added spacers; shifted USB connector a little